n/a matrix: derivative certificate harvest/lot id: 01 batch
Post on 05-Oct-2021
7 Views
Preview:
TRANSCRIPT
This report shall not be reproduced, unless in its entirety, without written approval from Kaycha Labs. This report isan Kaycha Labs certification. The results relate only to the material or product analyzed. Test results areconfidential unless explicitly waived otherwise. Void after 1 year from test end date. Cannabinoid content of batchmaterial may vary depending on sampling error. IC=In-control QC parameter, NC=Non-controlled QC parameter,ND=Not Detected, NA=Not Analyzed, ppm=Parts Per Million, ppb=Parts Per Billion. Limit of Detection (LoD) andLimit Of Quantitation (LoQ) are terms used to describe the smallest concentration that can be reliably measured byan analytical procedure. RPD=Reproducibility of two measurements. Action Levels are State determined thresholdsfor human safety for consumption and/or inhalation. The result >99% are variable based on uncertainty ofmeasurement (UM) for the analyte. The UM error is available from the lab upon request.The "Decision Rule" for thepass/fail does not include the UM. The limits are based on F.S. Rule 64-4.310.
David GreeneLab Director
State License # 19-05-02PISO Accreditation #17025:2017 #97164
___________________Signature
07/09/2020
___________________Signed On
673 N. Bardstown RdMount Washington, KY, 40047, US
Kaycha LabsWhole Plant USDA Organic CBD Oil - 750mg
N/AMatrix: Derivative
Certificateof Analysis
Sample:MO00708001-001Harvest/Lot ID: 01Seed to Sale #N/A
Batch Date :N/ABatch#: CB06292008
Sample Size Received: 30 mlRetail Product Size: 30
Ordered : 07/07/20Sampled : 07/07/20
Completed: 07/09/20 Expires: 07/09/21Sampling Method: SOP Client Method
Jul 09, 2020 | Cornbread HempPO Box 4242Louisville, KENTUCKY, 40204, United States
PASSEDPage 1 of 4
PRODUCT IMAGE SAFETY RESULTS MISC.
PesticidesPASSED
Heavy MetalsPASSED
MicrobialsPASSED
MycotoxinsPASSED
ResidualsSolventsPASSED
FilthPASSED
Water ActivityNOT TESTED
MoistureNOT TESTED
TerpenesNOT TESTED
CANNABINOID RESULTS
Total THC
0.119%THC/Container :33.201 mg
Total CBD
2.913%CBD/Container :812.942 mg
Total Cannabinoids
3.154%Total Cannabinoids/Container:880.245 mg
D9-THC THCA CBD CBDA D8-THC THCV CBN CBDV CBC CBG CBGA
0.119% ND 2.905% 0.010% ND ND ND 0.015% 0.067% 0.039% ND
1.190mg/g ND
29.050mg/g
0.100mg/g ND ND ND
0.150mg/g
0.670mg/g
0.390mg/g ND
LOD 0.0001 0.001 0.0001 0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.001
% % % % % % % % % % %
Cannabinoid Profile TestAnalyzed by Weight Extraction date : Extracted By :19 3.0124g NA NA
Analysis Method -SOP.T.40.020, SOP.T.30.050 Reviewed On - 07/09/20 15:06:31Analytical Batch -MO000755POT Instrument Used : HPLC Potency Analyzer Batch Date : 07/09/20 10:35:13
Reagent Dilution Consums. ID
Full spectrum cannabinoid analysis utilizing High Performance Liquid Chromatography with UV detection (HPLC-UV). (Method: SOP.T.30.050 forsample prep and Shimadzu High Sensitivity Method SOP.T.40.020 for analysis. LOQ for all cannabinoids is 1 mg/L). Measurement ofUncertainty: 2.7%
Filth PASSED
Analyzed By Weight Extraction date LOD(ppm) Extracted By9 NA NA NA
Analysis Method -SOP.T.40.013 Batch Date :Analytical Batch -NA Reviewed On - 07/09/20 10:08:15Instrument Used :
This includes but is not limited to hair, insects, feces, packaging contaminants, and manufacturing wasteand by-products. An SH-2B/T Stereo Microscope is use for inspection.
This report shall not be reproduced, unless in its entirety, without written approval from Kaycha Labs. This report isan Kaycha Labs certification. The results relate only to the material or product analyzed. Test results areconfidential unless explicitly waived otherwise. Void after 1 year from test end date. Cannabinoid content of batchmaterial may vary depending on sampling error. IC=In-control QC parameter, NC=Non-controlled QC parameter,ND=Not Detected, NA=Not Analyzed, ppm=Parts Per Million, ppb=Parts Per Billion. Limit of Detection (LoD) andLimit Of Quantitation (LoQ) are terms used to describe the smallest concentration that can be reliably measured byan analytical procedure. RPD=Reproducibility of two measurements. Action Levels are State determined thresholdsfor human safety for consumption and/or inhalation. The result >99% are variable based on uncertainty ofmeasurement (UM) for the analyte. The UM error is available from the lab upon request.The "Decision Rule" for thepass/fail does not include the UM. The limits are based on F.S. Rule 64-4.310.
David GreeneLab Director
State License # 19-05-02PISO Accreditation #17025:2017 #97164
___________________Signature
07/09/2020
___________________Signed On
673 N. Bardstown RdMount Washington, KY, 40047, US
Kaycha LabsWhole Plant USDA Organic CBD Oil - 750mg
N/AMatrix : Derivative
Certificate of Analysis PASSEDCornbread Hemp
PO Box 4242Louisville, KENTUCKY, 40204, United StatesTelephone: (502) 554-6857Email: eric@cornbreadhemp.com
Sample : MO00708001-001Harvest/LOT ID: 01Batch# : CB06292008Sampled : 07/07/20Ordered : 07/07/20
Sample Size Received : 30 mlCompleted : 07/09/20Expires: 07/09/21Sample Method : SOP Client Method
Page 2 of 4
Pesticides PASSEDPesticides LOD Units Action Level ResultABAMECTIN B1A 0.020 ppm 0.5 NDACEPHATE 0.010 ppm 0.5 NDACEQUINOCYL 0.02 ppm 2 NDACETAMIPRID 0.010 ppm 0.2 NDALDICARB 0.020 ppm 0.4 NDAZOXYSTROBIN 0.010 ppm 0.2 NDBIFENAZATE 0.010 ppm 0.2 NDBIFENTHRIN 0.010 ppm 0.2 NDBOSCALID 0.005 ppm 0.4 NDCARBARYL 0.010 ppm 0.2 NDCARBOFURAN 0.010 ppm 0.2 NDCHLORANTRANILIPROLE 0.010 ppm 0.2 NDCHLORPYRIFOS 0.010 ppm 0.2 NDCLOFENTEZINE 0.010 ppm 0.2 NDCOUMAPHOS 0.005 ppm 0.2 NDCYPERMETHRIN 0.010 ppm 1 NDDAMINOZIDE 0.010 ppm 1 NDDIAZANON 0.010 ppm 0.2 NDDICHLORVOS 0.050 ppm 0.1 NDDIMETHOATE 0.010 ppm 0.2 NDDIMETHOMORPH 0.005 ppm 0.1 NDETHOPROPHOS 0.010 ppm 0.2 NDETOFENPROX 0.010 ppm 0.4 NDETOXAZOLE 0.010 ppm 0.2 NDFENHEXAMID 0.005 ppm 0.1 NDFENOXYCARB 0.010 ppm 0.2 NDFENPYROXIMATE 0.010 ppm 0.4 NDFIPRONIL 0.020 ppm 0.4 NDFLONICAMID 0.010 ppm 1 NDFLUDIOXONIL 0.010 ppm 0.4 NDHEXYTHIAZOX 0.010 ppm 1 NDIMAZALIL 0.010 ppm 0.2 NDIMIDACLOPRID 0.010 ppm 0.4 NDKRESOXIM-METHYL 0.010 ppm 0.4 NDMALATHION 0.010 ppm 0.2 NDMETALAXYL 0.010 ppm 0.2 NDMETHIOCARB 0.010 ppm 0.2 NDMETHOMYL 0.010 ppm 0.6 NDMEVINPHOS 0.010 ppm 0.1 NDMYCLOBUTANIL 0.010 ppm 0.2 NDNALED 0.010 ppm 0.5 NDOXAMYL 0.010 ppm 1 NDPACLOBUTRAZOL 0.010 ppm 0.4 NDPERMETHRINS 0.050 ppm 1 NDPHOSMET 0.010 ppm 0.2 NDPIPERONYL BUTOXIDE 0.010 ppm 3 ND
Pesticides LOD Units Action Level ResultPRALLETHRIN 0.050 ppm 0.2 NDPROPICONAZOLE 0.010 ppm 0.4 NDPROPOXUR 0.010 ppm 0.2 NDPYRETHRIN I 0.010 ppm 1 NDPYRIDABEN 0.005 ppm 0.2 NDSPINETORAM 0.005 ppm 0.5 NDSPINOSAD (SPINOSYN A) 0.010 ppm 0.2 NDSPINOSAD (SPINOSYN D) 0.010 ppm 0.2 NDSPIROMESIFEN 0.010 ppm 0.2 NDSPIROTETRAMAT 0.020 ppm 0.2 NDSPIROXAMINE 0.010 ppm 0.4 NDTEBUCONAZOLE 0.010 ppm 0.4 NDTHIACLOPRID 0.010 ppm 0.2 NDTHIAMETHOXAM 0.010 ppm 0.5 NDTRIFLOXYSTROBIN 0.010 ppm 0.2 ND
Pesticides PASSED
Analyzed by Weight Extraction date Extracted By1 0.9937g 07/09/20 09:07:48 1
Analysis Method - SOP.T.30.060, SOP.T.40.060 ,Analytical Batch - MO000751PES Reviewed On- 07/09/20 10:08:15Instrument Used : LCMSMS 8060 PBatch Date : 07/08/20 14:43:47
Reagent Dilution Consums. ID102919.22 GLC103019.38 00280227103019.36 931CC103019.34 GD180020103019.32
Pesticide screen is performed using LC-MS which can screen down to below single digit ppb concentrationsfor regulated Pesticides. Currently we analyze for 57 Pesticides. (Method: SOP.T.30.060 Sample Preparationfor Pesticides Analysis via LCMSMS and SOP.T40.060 Procedure for Pesticide Quantification Using LCMS). *
This report shall not be reproduced, unless in its entirety, without written approval from Kaycha Labs. This report isan Kaycha Labs certification. The results relate only to the material or product analyzed. Test results areconfidential unless explicitly waived otherwise. Void after 1 year from test end date. Cannabinoid content of batchmaterial may vary depending on sampling error. IC=In-control QC parameter, NC=Non-controlled QC parameter,ND=Not Detected, NA=Not Analyzed, ppm=Parts Per Million, ppb=Parts Per Billion. Limit of Detection (LoD) andLimit Of Quantitation (LoQ) are terms used to describe the smallest concentration that can be reliably measured byan analytical procedure. RPD=Reproducibility of two measurements. Action Levels are State determined thresholdsfor human safety for consumption and/or inhalation. The result >99% are variable based on uncertainty ofmeasurement (UM) for the analyte. The UM error is available from the lab upon request.The "Decision Rule" for thepass/fail does not include the UM. The limits are based on F.S. Rule 64-4.310.
David GreeneLab Director
State License # 19-05-02PISO Accreditation #17025:2017 #97164
___________________Signature
07/09/2020
___________________Signed On
673 N. Bardstown RdMount Washington, KY, 40047, US
Kaycha LabsWhole Plant USDA Organic CBD Oil - 750mg
N/AMatrix : Derivative
Certificate of Analysis PASSEDCornbread Hemp
PO Box 4242Louisville, KENTUCKY, 40204, United StatesTelephone: (502) 554-6857Email: eric@cornbreadhemp.com
Sample : MO00708001-001Harvest/LOT ID: 01Batch# : CB06292008Sampled : 07/07/20Ordered : 07/07/20
Sample Size Received : 30 mlCompleted : 07/09/20Expires: 07/09/21Sample Method : SOP Client Method
Page 3 of 4
Residual Solvents PASSED
Solvent LOD Units ActionLevel(PPM)
Pass/Fail Result
TRICHLOROETHENE 3 ppm 80 PASS ND
CHLOROFORM 0.24 ppm 60 PASS ND
1,2-DICHLOROETHENE 0.24 ppm 1870 PASS ND
1,1-DICHLOROETHENE 2 ppm 8 PASS ND
PENTANES 90 ppm 2500 PASS ND
BUTANES (N-BUTANE) 50 ppm 5000 PASS ND
ACETONITRILE 7.2 ppm 410 PASS ND
ACETONE 90 ppm 5000 PASS ND
2-PROPANOL 60 ppm 5000 PASS ND
HEXANES 6 ppm 290 PASS ND
XYLENES 18 ppm 2170 PASS ND
TOLUENE 18 ppm 1068 PASS ND
PROPANE 80 ppm 5000 PASS ND
METHANOL 30 ppm 3000 PASS ND
XYLENES-P (1,4-DIMETHYLBENZENE)
18 ppm 2170 PASS ND
HEPTANE 60 ppm 5000 PASS ND
XYLENES-M (1,3-DIMETHYLBENZENE)
18 ppm 2170 PASS ND
ETHYLENE OXIDE 0.6 ppm 50 PASS ND
XYLENES-O (1,2-DIMETHYLBENZENE)
18 ppm 2170 PASS ND
ETHYL ETHER 60 ppm 5000 PASS ND
ETHYL ACETATE 48 ppm 5000 PASS ND
DICHLOROMETHANE 15 ppm 600 PASS ND
ETHANOL 120 ppm 5000 PASS ND
Residual Solvents PASSED
Analyzed by Weight Extraction date Extracted By18 0.032g 07/09/20 09:07:46 18
Analysis Method -SOP.T.40.032Analytical Batch -MO000752SOL Reviewed On - 07/09/20 09:38:56Instrument Used : GCMS2010Batch Date : 07/09/20 09:11:44
Reagent Dilution Consums. ID
Residual solvents screening is performed using GC-MS which can detect belowsingle digit ppm concentrations. Currently we analyze for 33 Residual solvents.(Method: SOP.T.30.042 Residual Solvents Analysis via GC-MS).
This report shall not be reproduced, unless in its entirety, without written approval from Kaycha Labs. This report isan Kaycha Labs certification. The results relate only to the material or product analyzed. Test results areconfidential unless explicitly waived otherwise. Void after 1 year from test end date. Cannabinoid content of batchmaterial may vary depending on sampling error. IC=In-control QC parameter, NC=Non-controlled QC parameter,ND=Not Detected, NA=Not Analyzed, ppm=Parts Per Million, ppb=Parts Per Billion. Limit of Detection (LoD) andLimit Of Quantitation (LoQ) are terms used to describe the smallest concentration that can be reliably measured byan analytical procedure. RPD=Reproducibility of two measurements. Action Levels are State determined thresholdsfor human safety for consumption and/or inhalation. The result >99% are variable based on uncertainty ofmeasurement (UM) for the analyte. The UM error is available from the lab upon request.The "Decision Rule" for thepass/fail does not include the UM. The limits are based on F.S. Rule 64-4.310.
David GreeneLab Director
State License # 19-05-02PISO Accreditation #17025:2017 #97164
___________________Signature
07/09/2020
___________________Signed On
673 N. Bardstown RdMount Washington, KY, 40047, US
Kaycha LabsWhole Plant USDA Organic CBD Oil - 750mg
N/AMatrix : Derivative
Certificate of Analysis PASSEDCornbread Hemp
PO Box 4242Louisville, KENTUCKY, 40204, United StatesTelephone: (502) 554-6857Email: eric@cornbreadhemp.com
Sample : MO00708001-001Harvest/LOT ID: 01Batch# : CB06292008Sampled : 07/07/20Ordered : 07/07/20
Sample Size Received : 30 mlCompleted : 07/09/20Expires: 07/09/21Sample Method : SOP Client Method
Page 4 of 4
Mycotoxins PASSED
Analyte LOD Units Result Action Level (PPM)AFLATOXIN G2 0.001 ppm ND 0.02AFLATOXIN G1 0.001 ppm ND 0.02AFLATOXIN B2 0.001 ppm ND 0.02AFLATOXIN B1 0.001 ppm ND 0.02OCHRATOXIN A+ 0.001 ppm ND 0.02
Analysis Method -SOP.T.30.060, SOP.T.40.060Analytical Batch - | Reviewed On - 07/09/20 10:08:07Instrument Used :Batch Date :
Analyzed by Weight Extraction date Extracted ByNA NA NA NA
Aflatoxins B1, B2, G1, G2, and Ochratoxins A testing using LC-MS. (Method: SOP.T.30.060 forSample Preparation and SOP.T40.060 Procedure for Mycotoxins Quantification Using LCMS. LOQ 1.0ppb). Total Aflatoxins (Aflotoxin B1, B2, G1, G2) must be <20µg/Kg. Ochratoxins must be <20µg/Kg.
Microbials PASSED
Analyte ResultASPERGILLUS_TERREUS_1J2 not present in 1 gram.ASPERGILLUS_NIGER not present in 1 gram.ASPERGILLUS_FUMIGATUS not present in 1 gram.ASPERGILLUS_FLAVUS not present in 1 gram.SALMONELLA_SPECIFIC_GENE not present in 1 gram.ESCHERICHIA_COLI_SHIGELLA_SPP not present in 1 gram.
Analysis Method -SOP.T.40.043Analytical Batch -NA | Reviewed On - 07/09/20 12:31:05Instrument Used :Batch Date :
Analyzed by Weight Extraction date Extracted ByNA NA NA NA
Reagent Dilution Consums. ID
Microbiological testing for Fungal and Bacterial Identification via Polymerase Chain Reaction (PCR)method consisting of sample DNA amplified via tandem Polymerase Chain Reaction (PCR) as acrude lysate which avoids purification. (Method SOP.T.40.043) If a pathogenic Escherichia Coli,Salmonella, Aspergillus fumigatus, Aspergillus flavus, Aspergillus niger, or Aspergillus terreus isdetected in 1g of a sample, the sample fails the microbiological-impurity testing.
Heavy Metals PASSED
Reagent110119.52110119.44112519.01110119.36
Metal LOD Unit Result Action Level (PPM)
ARSENIC 0.02 ppm ND 10CADMIUM 0.02 ppm ND 4.1LEAD 0.02 ppm ND 10MERCURY 0.02 ppm ND 2
Analyzed by Weight Extraction date Extracted By18 0.489g 07/09/20 09:07:21 18
Analysis Method -SOP.T.40.050, SOP.T.30.052Analytical Batch -MO000753HEA | Reviewed On - 07/09/20 11:11:08Instrument Used : ICP-MS 2030Batch Date : 07/09/20 09:47:10
Heavy Metals screening is performed using ICP-MS (Inductively Coupled Plasma – MassSpectrometer) which can screen down to below single digit ppb concentrations for regulated heavymetals using Method SOP.T.30.052 Sample Preparation for Heavy Metals Analysis via ICP-MS andSOP.T.40.050 Heavy Metals Analysis via ICP-MS. *Action Limits based on Colorado Regulations.
top related