non magnetic tubulars - saltire energy · 7 – 1/16” blow out preventors 1) 4-3/4” od nc38...
Post on 17-Mar-2019
230 Views
Preview:
TRANSCRIPT
7 – 1/16” Blow out Preventors
1) 4-3/4” OD NC38 NMDC Drill Collar2) 6-3/4” OD NC50 NMDC Drill Collar3) 8” OD 6-5/8” REG NMDC Drill Collar4) 8-1/4” OD 6-5/8” REG NMDC Drill Collar5) 9-1/2” OD 7-5/8” REG NMDC Drill Collar 3.000” ID6) 9-1/2” OD 7-5/8” REG NMDC Drill Collar 3.031” ID7) 9-1/2” OD 7-5/8” REG NMDC Drill Collar 4.000” ID
8) 6-3/4” OD NC50 NMDC Spiral Drill Collar9) 8-1/4” OD 6-5/8” REG NMDC Spiral Drill Collar10) 9-1/2” OD 7-5/8” REG NMDC Spiral Drill Collar
11) 4-3/4” OD NC38 NMCSDP Flexi Collar12) 6-1/2” OD NC50 NMCSDP Flexi Collar13) 6-3/4” OD NC50 NMCSDP Flexi Collar14) 8” OD 6-5/8” REG NMCSDP Flexi Collar15) 8-1/4” OD 6-5/8” REG NMCSDP Flexi Collar
Page
1234567
8910
1112131415
NON MAGNETIC TUBULARS
16) Koomey Control Unit
17) HT 14:200 Torque Unit
16
17
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF48 Rev1 1st July 2012
NON MAGNETIC DRILL COLLAR SPECIFICATION SHEET 4.750” NC38 SLICK COLLAR
Non MAG Drill Collar
Original Equipment Manufacturer
Schoeller Bleckmann
Country of Origin
Austria
Nominal OD 4 ¾” (4.750”)
Nominal ID 2 11/16” (2.6875”)
Material Grade P530 Grain Size ASTM
Magnetic Permeability
1.001 max. Drift Size 2 9/16” (2.5625”)
Drill Collar Capacities Tensile Strength
120,000 Psi Minimum 827 Mpa
Yield Strength
110,000 Psi Minimum 758 Mpa
Impact Strength
Above 60J Ft / Lbs Charpy V Notch
Hardness (Brinell)
Minimum 285 BHN
Tool Joint / Connection Specifications Connection NC38 OD 4 ¾”
(4.750”) ID 2 11/16”
(2.6875”) Image Not To Scale
For Representation Only Adjusted Weight Average Length 31.00 ft Tensile Strength 587,300 Lbs Torsional
Strength 18,100 Ft-‐Lbs
Hardbanding Recommended Make Up Torque
9,700 Ft-‐Lbs IPC None
Chemical Properties Maximum Make Up Torque
Ft-‐Lbs
Phosphorous Elongation 18 % Sulphur <0.030%
Average Weight Per Joint Fluid Displacement Fluid Capacity
Manufacturing Criteria Slip Recess N/A Inspection Criteria
NS-‐2 API Spec 7-‐1 Elevator Recess N/A
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
Page 1
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF48 Rev1 1st July 2012
NON MAGNETIC DRILL COLLAR SPECIFICATION SHEET 6.750” NC50 SLICK COLLAR
Non MAG Drill Collar
Original Equipment Manufacturer
Schoeller Bleckmann
Country of Origin
Austria
Nominal OD 6 ¾” (6.750”)
Nominal ID 3 ¼” (3.250”)
Material Grade P530 Grain Size ASTM
Magnetic Permeability
1.001 max. Drift Size 3 1/8” (3.125”)
Drill Collar Capacities Tensile Strength
120,000 Psi Minimum 827 Mpa
Yield Strength
110,000 Psi Minimum 758 Mpa
Impact Strength
Above 60J
Hardness (Brinell)
Minimum 285 BHN
Tool Joint / Connection Specifications Connection
NC50
OD 6 ¾” (6.750”)
ID 3 ¼” (3.250”)
Image Not To Scale For Representation Only
Adjusted Weight Average Length 31.00 ft Recommended Make Up Torque
Ft-‐Lbs
Hardbanding None Maximum Make Up Torque
Ft-‐Lbs IPC None
Chemical Properties Phosphorous <0.05% Elongation 18 % Sulphur <0.030%
Average Weight Per Joint Fluid Displacement Fluid Capacity
Manufacturing Criteria Slip Recess N/A Inspection Criteria
NS-‐2 API Spec 7-‐1 Elevator Recess N/A
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
Page 2
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF48 Rev1 1st July 2012
NON MAGNETIC DRILL COLLAR SPECIFICATION SHEET 8.000” 6-5/8” REG DRILL COLLAR
Non MAG Drill Collar
Original Equipment Manufacturer
Schoeller Bleckmann
Country of Origin
Austria
Nominal OD 8” (8.000”)
Nominal ID 2 13/16” (2.8125”)
Material Grade P530 Grain Size ASTM
Magnetic Permeability
1.001 max. Drift Size 3 11/16” (3.6875”)
Drill Collar Capacities Tensile Strength
110,000 Psi Minimum 758 Mpa
Yield Strength
100,000 Psi Minimum 689 Mpa
Impact Strength
Above 60J
Hardness (Brinell)
Minimum 285 BHN
Tool Joint / Connection Specifications Connection 6 5/8” REG OD 8”
(8.000”) ID 2 13/16”
(2.8125”) Image Not To Scale
For Representation Only Adjusted Weight Average Length 31.00 ft Recommended Make Up Torque
Ft-‐Lbs
Hardbanding None Maximum Make Up Torque
Ft-‐Lbs IPC None
Chemical Properties Phosphorous <0.05% Elongation 20 % Sulphur <0.030%
Average Weight Per Joint Fluid Displacement Fluid Capacity
Manufacturing Criteria Slip Recess N/A Inspection Criteria
NS-‐2 API Spec 7-‐1 Elevator Recess N/A
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
Page 3
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF48 Rev1 1st July 2012
NON MAGNETIC DRILL COLLAR SPECIFICATION SHEET 8.250” 6-5/8” REG DRILL COLLAR
Non MAG Drill Collar
Original Equipment Manufacturer
Schoeller Bleckmann
Country of Origin
Austria
Nominal OD 8 ¼” (8.250”)
Nominal ID 3 ½” (3.500”)
Material Grade P530 Grain Size ASTM
Magnetic Permeability
1.001 max. Drift Size 3 3/8” (3.325”)
Drill Collar Capacities Tensile Strength
110,000 Psi Minimum 758 Mpa
Yield Strength
100,000 Psi Minimum 689 Mpa
Impact Strength
Above 60J
Hardness (Brinell)
Minimum 285 BHN
Tool Joint / Connection Specifications Connection 6 5/8” REG OD 8 ¼”
(8.000”) ID 3 ½”
(3.500”) Image Not To Scale
For Representation Only Adjusted Weight Average Length 31.00 ft Recommended Make Up Torque
Ft-‐Lbs
Hardbanding None Maximum Make Up Torque
Ft-‐Lbs IPC None
Chemical Properties Phosphorous <0.05% Elongation 20 % Sulphur <0.030%
Average Weight Per Joint Fluid Displacement Fluid Capacity
Manufacturing Criteria Slip Recess N/A Inspection Criteria
NS-‐2 API Spec 7-‐1 Elevator Recess N/A
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
Page 4
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF48 Rev1 1st July 2012
NON MAGNETIC DRILL COLLAR SPECIFICATION SHEET 9.500” 7-5/8” REG DRILL COLLAR
Non MAG Drill Collar
Original Equipment Manufacturer
Schoeller Bleckmann
Country of Origin
Austria
Nominal OD 9 ½” (9.500”)
Nominal ID 3” (3.000”)
Material Grade P530 Grain Size ASTM
Magnetic Permeability
1.001 max. Drift Size 2 7/8” (2.875”)
Drill Collar Capacities Tensile Strength
110,000 Psi Minimum 758 Mpa
Yield Strength
100,000 Psi Minimum 689 Mpa
Impact Strength
Above 60J
Hardness (Brinell)
Minimum 285 BHN
Tool Joint / Connection Specifications Connection 7 5/8” REG OD 9 ½”
(9.500”) ID 3”
(3.000”) Image Not To Scale
For Representation Only Adjusted Weight Average Length 31.00 ft Recommended Make Up Torque
Ft-‐Lbs
Hardbanding None Maximum Make Up Torque
Ft-‐Lbs IPC None
Chemical Properties Phosphorous <0.05% Elongation 20 % Sulphur <0.030%
Average Weight Per Joint Fluid Displacement Fluid Capacity
Manufacturing Criteria Slip Recess N/A Inspection Criteria
NS-‐2 API Spec 7-‐1 Elevator Recess N/A
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
Page 5
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF48 Rev1 1st July 2012
NON MAGNETIC DRILL COLLAR SPECIFICATION SHEET 9.500” 7-5/8” REG DRILL COLLAR
Non MAG Drill Collar
Original Equipment Manufacturer
Schoeller Bleckmann
Country of Origin
Austria
Nominal OD 9 ½” (9.500”)
Nominal ID 3 1/32” (3.031”)
Material Grade P530 Grain Size ASTM
Magnetic Permeability
1.001 max. Drift Size 2 29/32” (2.9063”)
Drill Collar Capacities Tensile Strength
110,000 Psi Minimum 758 Mpa
Yield Strength
100,000 Psi Minimum 689 Mpa
Impact Strength
Above 60J
Hardness (Brinell)
Minimum 285 BHN
Tool Joint / Connection Specifications Connection 7 5/8” REG OD 9 ½”
(9.500”) ID 3 1/32””
(3.031”) Image Not To Scale
For Representation Only Adjusted Weight Average Length 31.00 ft Recommended Make Up Torque
Ft-‐Lbs
Hardbanding None Maximum Make Up Torque
Ft-‐Lbs IPC None
Chemical Properties Phosphorous <0.05% Elongation 20 % Sulphur <0.030%
Average Weight Per Joint Fluid Displacement Fluid Capacity
Manufacturing Criteria Slip Recess N/A Inspection Criteria
NS-‐2 API Spec 7-‐1 Elevator Recess N/A
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
Page 6
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF48 Rev1 1st July 2012
NON MAGNETIC DRILL COLLAR SPECIFICATION SHEET 9.500” 7-5/8” REG DRILL COLLAR
Non MAG Drill Collar
Original Equipment Manufacturer
Schoeller Bleckmann
Country of Origin
Austria
Nominal OD 9 ½” (9.500”)
Nominal ID 4” (4.000”)
Material Grade P530 Grain Size ASTM
Magnetic Permeability
1.001 max. Drift Size 3 3/8” (3.325”)
Drill Collar Capacities Tensile Strength
110,000 Psi Minimum 758 Mpa
Yield Strength
100,000 Psi Minimum 689 Mpa
Impact Strength
Above 60J
Hardness (Brinell)
Minimum 285 BHN
Tool Joint / Connection Specifications Connection 7 5/8” REG OD 9 ½”
(9.500”) ID 4”
(4.000”) Image Not To Scale
For Representation Only Adjusted Weight Average Length 31.00 ft Recommended Make Up Torque
Ft-‐Lbs
Hardbanding None Maximum Make Up Torque
Ft-‐Lbs IPC None
Chemical Properties Phosphorous <0.05% Elongation 20 % Sulphur <0.030%
Average Weight Per Joint Fluid Displacement Fluid Capacity
Manufacturing Criteria Slip Recess N/A Inspection Criteria
NS-‐2 API Spec 7-‐1 Elevator Recess N/A
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
Page 7
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF48 Rev1 1st July 2012
NON MAGNETIC DRILL COLLAR SPECIFICATION SHEET 6.750” NC50 SPIRAL COLLAR
Non MAG Spiral Drill Collar
Original Equipment Manufacturer
Schoeller Bleckmann
Country of Origin
Austria
Nominal OD 6 ¾” (6.750”)
Nominal ID 2 7/8” (2.875”)
Material Grade P530 Grain Size ASTM
Magnetic Permeability
1.001 max. Drift Size 3 1/8” (3.125”)
Drill Collar Capacities Tensile Strength 120,000 Psi Minimum
827 Mpa Yield Strength 110,000 Psi Minimum
758 Mpa Impact Strength
Above 60J
Hardness (Brinell)
Minimum 285 BHN
Tool Joint / Connection Specifications Connection
NC50
OD 6 ¾” (6.750”)
ID 2 7/8” (2.875”)
Image Not To Scale For Representation Only
Adjusted Weight Average Length 31.00 ft
Hardbanding None Recommended Make Up Torque
Ft-‐Lbs
IPC None Maximum Make Up Torque
Ft-‐Lbs Chemical Properties
Phosphorous <0.05% Elongation 18 % Sulphur <0.030% Fluid Displacement Fluid Capacity
Manufacturing Criteria Slip Recess N/A Inspection
Criteria NS-‐2
API Spec 7-‐1 Elevator Recess N/A
The information on this specification sheet is provided for illustration purposes only and is taken from information available
from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
Page 8
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF48 Rev1 1st July 2012
NON MAGNETIC DRILL COLLAR SPECIFICATION SHEET 8.250” 6-5/8” REG DRILL COLLAR
Non MAG Drill Collar
Original Equipment Manufacturer
Schoeller Bleckmann
Country of Origin
Austria
Nominal OD 8 ¼” (8.250”)
Nominal ID 2 13/16” (2.8125”)
Material Grade P530 Grain Size ASTM
Magnetic Permeability
1.001 max. Drift Size 2 11/16” (2.6875”)
Drill Collar Capacities Tensile Strength
100,000 Psi Minimum 689 Mpa
Yield Strength
110,000 Psi Minimum 758 Mpa
Impact Strength
Above 60J
Hardness (Brinell)
Minimum 285 BHN
Tool Joint / Connection Specifications Connection 6 5/8” REG OD 8 ¼”
(8.000”) ID 2 13/16”
(2.8125”) Image Not To Scale
For Representation Only Adjusted Weight Average Length 31.00 ft Recommended Make Up Torque
Ft-‐Lbs
Hardbanding Maximum Make Up Torque
Ft-‐Lbs IPC None
Chemical Properties Phosphorous <0.05% Elongation 20 % Sulphur <0.030%
Average Weight Per Joint Fluid Displacement Fluid Capacity
Manufacturing Criteria Slip Recess N/A Inspection Criteria
NS-‐2 API Spec 7-‐1 Elevator Recess N/A
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
Page 9
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF48 Rev1 1st July 2012
NON MAGNETIC DRILL COLLAR SPECIFICATION SHEET 9.500” 7-5/8” REG DRILL COLLAR
Non MAG Drill Collar
Original Equipment Manufacturer
Schoeller Bleckmann
Country of Origin
Austria
Nominal OD 9 ½” (9.500”)
Nominal ID 3” (3.000”)
Material Grade P530 Grain Size ASTM
Magnetic Permeability
1.001 max. Drift Size 2 7/8” (2.875”)
Drill Collar Capacities Tensile Strength
110,00 Psi Minimum 758 Mpa
Yield Strength
100,00 Psi Minimum 689 Mpa
Impact Strength
Above 60J Ft / Lbs
Hardness (Brinell)
Minimum 285 BHN
Tool Joint / Connection Specifications Connection 7 5/8” REG OD 9 ½”
(9.500”) ID 3”
(3.000”) Image Not To Scale
For Representation Only Adjusted Weight Average Length 31.00 ft Recommended Make Up Torque
Ft-‐Lbs
Hardbanding None Maximum Make Up Torque
Ft-‐Lbs IPC None
Chemical Properties Phosphorous <0.05% Elongation 20 Sulphur <0.030%
Average Weight Per Joint Fluid Displacement Fluid Capacity
Manufacturing Criteria Slip Recess N/A Inspection Criteria
NS-‐2 API Spec 7-‐1 Elevator Recess N/A
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
Page 10
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF48 Rev1 1st July 2012
NON MAGNETIC DRILL COLLAR SPECIFICATION SHEET 4.750” NC38 FLEXI COLLAR
Non MAG Flexi Collar
Original Equipment Manufacturer
Schoeller Bleckmann
Country of Origin
Austria
Nominal OD 4 ¾” (4.750”)
Nominal ID 2 11/16” (2.6875”)
Material Grade P530 Grain Size 3-‐5 ASTM
Magnetic Permeability
1.001 max. Drift Size 2 9/16” (2.5625”)
Drill Collar Capacities Tensile Strength
130.5 KSI 120 KSI Min
Yield Strength
121.4 KSI 110 KSI Min
Impact Strength
171 Ft / Lbs Charpy V Notch
Hardness (Brinell)
311 – 321 BHN
Tool Joint / Connection Specifications Connection NC38 OD 4 ¾”
(4.750”) ID 2 11/16”
(2.6875”)
Image Not To Scale For Representation Only
Adjusted Weight Average Length 31.00 ft Tensile Strength 587,300 Lbs Torsional
Strength 18,100 Ft-‐Lbs
Recommended Make Up Torque
9,700 Ft-‐Lbs
Hardbanding Maximum Make Up Torque
Ft-‐Lbs IPC None
Chemical Properties Phosphorous <0.05% Elongation 18 % Sulphur <0.030%
Average Weight Per Joint Fluid Displacement Fluid Capacity 0.360 gal / ft
Manufacturing Criteria Slip Recess N/A Inspection Criteria
NS-‐2 API Spec 7-‐1 Elevator Recess N/A
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
Page 11
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF48 Rev1 1st July 2012
NON MAGNETIC DRILL COLLAR SPECIFICATION SHEET 6.500” NC50 FLEXI COLLAR
Non MAG Flexi Collar
Original Equipment Manufacturer
Schoeller Bleckmann
Country of Origin
Austria
Nominal OD 6 ½” (6.500”)
Nominal ID 3 ¼” (3.250”)
Material Grade P530 Grain Size 1-‐2 ASTM
Magnetic Permeability
1.001 max. Drift Size 3 1/8” (3.125”)
Drill Collar Capacities Tensile Strength
128.1 KSI 120 KSI Min
Yield Strength
119.2 KSI 110 KSI Min
Impact Strength
181 Ft / Lbs Charpy V Notch
Hardness (Brinell)
296 – 303 BHN
Tool Joint / Connection Specifications Connection NC50 OD 6 ½”
(6.500”) ID 3 ¼”
(3.250”)
Image Not To Scale For Representation Only
Adjusted Weight Average Length 31.00 ft Tensile Strength 560,800 Lbs Torsional
Strength 71,240 Ft-‐Lbs
Recommended Make Up Torque
26,700 Ft-‐Lbs
Hardbanding None Maximum Make Up Torque
Ft-‐Lbs IPC None
Chemical Properties Phosphorous <0.05% Elongation 18 % Sulphur <0.030%
Average Weight Per Joint Fluid Displacement Fluid Capacity 0.698 gal / ft
Manufacturing Criteria Slip Recess N/A Inspection Criteria
NS-‐2 API Spec 7-‐1 Elevator Recess N/A
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
Page 12
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF48 Rev1 1st July 2012
NON MAGNETIC DRILL COLLAR SPECIFICATION SHEET 6.750” NC50 FLEXI COLLAR
Non MAG Flexi Collar
Original Equipment Manufacturer
Schoeller Bleckmann
Country of Origin
Austria
Nominal OD 6 ¾” (6.750”)
Nominal ID 3 ¼” (3.250”)
Material Grade P530 Grain Size 2-‐4 ASTM
Magnetic Permeability
1.001 max. Drift Size 3 1/8” (3.125”)
Drill Collar Capacities Tensile Strength
132.9 KSI 120 KSI Min
Yield Strength
123.7 KSI 110 KSI Min
Impact Strength
170 Ft / Lbs Charpy V Notch
Hardness (Brinell)
306 – 316 BHN
Tool Joint / Connection Specifications Connection
NC50
OD 6 ¾” (6.750”)
ID 3 ¼” (3.250”)
Image Not To Scale For Representation Only
Adjusted Weight Average Length 31.00 ft Recommended Make Up Torque
Ft-‐Lbs
Hardbanding None Maximum Make Up Torque
Ft-‐Lbs IPC None
Chemical Properties Phosphorous <0.05% Elongation 18 % Sulphur <0.030%
Average Weight Per Joint Fluid Displacement Fluid Capacity
Manufacturing Criteria Slip Recess N/A Inspection Criteria
NS-‐2 API Spec 7-‐1 Elevator Recess N/A
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
Page 13
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF48 Rev1 1st July 2012
NON MAGNETIC DRILL COLLAR SPECIFICATION SHEET 8.000” 6-5/8” REG FLEXI COLLAR
Non MAG Flexi Collar
Original Equipment Manufacturer
Schoeller Bleckmann
Country of Origin
Austria
Nominal OD 8” (8.000”)
Nominal ID 3 ½” (3.500”)
Material Grade P530 Grain Size 3-‐4 ASTM
Magnetic Permeability
1.001 max. Drift Size 3 3/8” (3.325”)
Drill Collar Capacities Tensile Strength
130.5 KSI 120 KSI Min
Yield Strength
120.5 KSI 100 KSI Min
Impact Strength
146 Ft / Lbs Charpy V Notch
Hardness (Brinell)
298 – 302 BHN
Tool Joint / Connection Specifications Connection 6 5/8” REG OD 8”
(8.000”) ID 3 ½”
(3.500”)
Image Not To Scale For Representation Only
Adjusted Weight Average Length 31.00 ft Recommended Make Up Torque
Ft-‐Lbs
Hardbanding None Maximum Make Up Torque
Ft-‐Lbs IPC None
Chemical Properties Phosphorous <0.05% Elongation 20 % Sulphur <0.030%
Average Weight Per Joint Fluid Displacement Fluid Capacity
Manufacturing Criteria Slip Recess N/A Inspection Criteria
NS-‐2 API Spec 7-‐1 Elevator Recess N/A
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
Page 14
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
IMSF48 Rev1 1st July 2012
NON MAGNETIC DRILL COLLAR SPECIFICATION SHEET 8.250” 6-5/8” REG FLEXI COLLAR
Non MAG Flexi Collar
Original Equipment Manufacturer
Schoeller Bleckmann
Country of Origin
Austria
Nominal OD 8 ¼” (8.250”)
Nominal ID 3 ½” (3.500”)
Material Grade P530 Grain Size ASTM
Magnetic Permeability
1.001 max. Drift Size 3 3/8” (3.325”)
Drill Collar Capacities Tensile Strength
110,000 Psi Minimum 758 Mpa
Yield Strength
100,000 Psi Minimum 689 Mpa
Impact Strength
Above 60J Ft / Lbs
Hardness (Brinell)
Minimum 285 BHN
Tool Joint / Connection Specifications Connection 6 5/8” REG OD 8 ¼”
(8.000”) ID 3 ½”
(3.500”)
Image Not To Scale For Representation Only
Adjusted Weight Average Length 31.00 ft Recommended Make Up Torque
Ft-‐Lbs
Hardbanding None Maximum Make Up Torque
Ft-‐Lbs IPC None
Chemical Properties Phosphorous <0.05% Elongation 20 % Sulphur <0.030%
Average Weight Per Joint Fluid Displacement Fluid Capacity
Manufacturing Criteria Slip Recess N/A Inspection Criteria
NS-‐2 API Spec 7-‐1 Elevator Recess N/A
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
Page 15
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
SPECIFICATION SHEET Koomey Control Unit
Model 5 Function Electrics Koomey Control Unit Details
Approximate Height of Unit
99” Approximate Width of Unit
57“
Approximate Length of Unit
72” Approximate Weight of Unit
3600Ibs
Capacity
8 x 11 USG Functions 5
Pumps 2x Air Certification DNV
Image Not To Scale For Representation Only
Saltire Pressure Control Ltd Workshop Badentoy Road, Badentoy Park, Portlethen, Aberdeen AB12 4YA
TEL: +44 (0) 1224 782211 E-‐Mail: enquiries@saltire-‐energy.com
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy of
the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
Page 16
Saltire Energy Ltd Oil Tool Rentals of the highest quality since 1986
SPECIFICATION SHEET HT 14:200 Torque System
AMC Engineering
HT 14:200 Torque System
Original Equipment Manufacturer
AMC Engineering Limited
Country of Origin
UK
Fixed Headstock Capacity
2-‐3/8” Minimum
14” Maximum
Travelling Tailstock Capacity
2-‐3/8” Minimum
14” Maximum
Tailstock has a Top Open Option available for easy loading of tools
into the machine
Torque Capacities Maximum Make Up Torque
160,000 Ft-‐Lbs
Maximum Break Out Torque
200,000 Ft-‐Lbs
Self-‐Centering Cylinders for Safe Centering of Tools
Torque Unit Details
Image Not To Scale
For Representation Only
Approximate Length of Unit
12 feet
Approximate Width of Unit
6 Approximate Height of Unit
8
Operators Approximate Total Weight of Unit
6 Tonne Trained Personnel Craneage / Handling Capacity of Workshop
Operating Working Pressure
3000 PSI
20 Tonne Certification
No Changing of Jaws Required
Torque Chart Print Out
Torque Facilities offered at Saltire Pressure Control Ltd Workshop Badentoy Road, Badentoy Park, Portlethen, Aberdeen AB12 4YA
TEL: +44 (0) 1224 782211 E-‐Mail: enquiries@saltire-‐energy.com
The information on this specification sheet is provided for illustration purposes only and is taken from information available from the manufacturer and other public sources. Saltire Energy Limited accepts no responsibility or liability for the accuracy
of the information provided or for any error, omission or misstatement.
www.saltire-energy.com
The user is fully expected to review the above information for accuracy.
Page 17
top related