optical to fe conversion_marcony
Post on 16-Nov-2015
11 Views
Preview:
DESCRIPTION
OPTICAL FIBER
TRANSCRIPT
Optical to FE conversionSlide title In CAPITALS 50 pt Slide
subtitle 32 pt
Optical to FE conversion
OMS 1664
Top right corner for field-mark, customer or partner logotypes. See Best practice for example.
Slide title 40 pt Slide subtitle 24 pt Text 24 pt Bullets level 2-5 20 pt
Ericsson Internal
Right Click and configure SDH Backplane
Top right corner for field-mark, customer or partner logotypes. See Best practice for example.
Slide title 40 pt Slide subtitle 24 pt Text 24 pt Bullets level 2-5 20 pt
Ericsson Internal
*
Step 2: Create cross-connections from optical interface to SDH backplane of Ethernet Layer
For Example: Creating cross-connection with virtual concatination of size 21
Top right corner for field-mark, customer or partner logotypes. See Best practice for example.
Slide title 40 pt Slide subtitle 24 pt Text 24 pt Bullets level 2-5 20 pt
Ericsson Internal
*
Step 3: Open Ethernet connections, open VCG transport port on the left and SDH backplane on right
Top right corner for field-mark, customer or partner logotypes. See Best practice for example.
Slide title 40 pt Slide subtitle 24 pt Text 24 pt Bullets level 2-5 20 pt
Ericsson Internal
Step 3 Cont….
For Example: Connect the network (n) part of 101 port of VCG transport port to SDH backplane.
Top right corner for field-mark, customer or partner logotypes. See Best practice for example.
Slide title 40 pt Slide subtitle 24 pt Text 24 pt Bullets level 2-5 20 pt
Ericsson Internal
*
Step 4: In the Ethernet Layer, go to Physical port. Select the desired ethernet port.
Top right corner for field-mark, customer or partner logotypes. See Best practice for example.
Slide title 40 pt Slide subtitle 24 pt Text 24 pt Bullets level 2-5 20 pt
Ericsson Internal
*
Step 5: Connect the client part of VCG transport port to the network part of the Ethernet physical port
Top right corner for field-mark, customer or partner logotypes. See Best practice for example.
Slide title 40 pt Slide subtitle 24 pt Text 24 pt Bullets level 2-5 20 pt
Ericsson Internal
Step 6: Open Ethernet port configuration
Top right corner for field-mark, customer or partner logotypes. See Best practice for example.
Slide title 40 pt Slide subtitle 24 pt Text 24 pt Bullets level 2-5 20 pt
Ericsson Internal
*
Step 7: Go to Physical ports and then to SLA. Enter the applicable values in Client and Network SLA.
Top right corner for field-mark, customer or partner logotypes. See Best practice for example.
Slide title 40 pt Slide subtitle 24 pt Text 24 pt Bullets level 2-5 20 pt
Ericsson Internal
*
Top right corner for field-mark, customer or partner logotypes. See Best practice for example.
Slide title 40 pt Slide subtitle 24 pt Text 24 pt Bullets level 2-5 20 pt
Ericsson Internal
Optical to FE conversion
OMS 1664
Top right corner for field-mark, customer or partner logotypes. See Best practice for example.
Slide title 40 pt Slide subtitle 24 pt Text 24 pt Bullets level 2-5 20 pt
Ericsson Internal
Right Click and configure SDH Backplane
Top right corner for field-mark, customer or partner logotypes. See Best practice for example.
Slide title 40 pt Slide subtitle 24 pt Text 24 pt Bullets level 2-5 20 pt
Ericsson Internal
*
Step 2: Create cross-connections from optical interface to SDH backplane of Ethernet Layer
For Example: Creating cross-connection with virtual concatination of size 21
Top right corner for field-mark, customer or partner logotypes. See Best practice for example.
Slide title 40 pt Slide subtitle 24 pt Text 24 pt Bullets level 2-5 20 pt
Ericsson Internal
*
Step 3: Open Ethernet connections, open VCG transport port on the left and SDH backplane on right
Top right corner for field-mark, customer or partner logotypes. See Best practice for example.
Slide title 40 pt Slide subtitle 24 pt Text 24 pt Bullets level 2-5 20 pt
Ericsson Internal
Step 3 Cont….
For Example: Connect the network (n) part of 101 port of VCG transport port to SDH backplane.
Top right corner for field-mark, customer or partner logotypes. See Best practice for example.
Slide title 40 pt Slide subtitle 24 pt Text 24 pt Bullets level 2-5 20 pt
Ericsson Internal
*
Step 4: In the Ethernet Layer, go to Physical port. Select the desired ethernet port.
Top right corner for field-mark, customer or partner logotypes. See Best practice for example.
Slide title 40 pt Slide subtitle 24 pt Text 24 pt Bullets level 2-5 20 pt
Ericsson Internal
*
Step 5: Connect the client part of VCG transport port to the network part of the Ethernet physical port
Top right corner for field-mark, customer or partner logotypes. See Best practice for example.
Slide title 40 pt Slide subtitle 24 pt Text 24 pt Bullets level 2-5 20 pt
Ericsson Internal
Step 6: Open Ethernet port configuration
Top right corner for field-mark, customer or partner logotypes. See Best practice for example.
Slide title 40 pt Slide subtitle 24 pt Text 24 pt Bullets level 2-5 20 pt
Ericsson Internal
*
Step 7: Go to Physical ports and then to SLA. Enter the applicable values in Client and Network SLA.
Top right corner for field-mark, customer or partner logotypes. See Best practice for example.
Slide title 40 pt Slide subtitle 24 pt Text 24 pt Bullets level 2-5 20 pt
Ericsson Internal
*
Top right corner for field-mark, customer or partner logotypes. See Best practice for example.
Slide title 40 pt Slide subtitle 24 pt Text 24 pt Bullets level 2-5 20 pt
Ericsson Internal
top related