physics elasticity - study material for jee main
Post on 26-May-2015
1.117 Views
Preview:
DESCRIPTION
TRANSCRIPT
9011041155 / 9011031155
• Live Webinars (online lectures) with
recordings.
• Online Query Solving
• Online MCQ tests with detailed
solutions
• Online Notes and Solved Exercises
• Career Counseling
Elasticity
1
9011041155 / 9011031155
Deformation
When balanced forces are applied on a material body,
dimension/s of the body (i.e. size volume, shape or all 2
9011041155 / 9011031155
three) may change. Such changes are called
deformation.
Deforming Forces
The forces which cause deformation of the body are
called deforming forces. e.g. When rubber band is
stretched from both the sides, its length increases. This
is called deformation and the forces are called
deforming forces.
Elasticity
It is the property possessed by a material body by
virtue of which the body opposes any change in its
dimensions, within elastic limit & regain them when
deforming forces are removed.
Elastic body
The body which possesses the property of elasticity is
called elastic body. OR It is the body which opposes 3
9011041155 / 9011031155
the deformation, within the elastic limit and regain its
original dimensions after removal of deforming forces.
e.g. rubber, copper, steel, gold, silver etc.
Plastic body
The body which do not possess the property of
elasticity OR the body which do not oppose the
deformation and can not regain its original dimensions
after removal of deforming forces is called a plastic
body. OR A body which can be deformed when very
small deforming force is applied and which doesn’t
regain its original dimensions when the forces are
removed, is called plastic body. e.g. clay, chalk,
Plasticine etc.
Restoring Forces
When deforming forces are applied on a material body,
some internal forces are developed in the body, which 4
9011041155 / 9011031155
try to oppose the changes in the dimension/s. These
forces are called restoring forces.
If the magnitude of deforming forces is greater than
that of restoring forces, the deformation takes place.
As the restoring forces are directly proportional to the
deformation, this increases the magnitude of deforming
forces. If it is still less then that of the deforming forces,
deformation continues. The process continues till the
equilibrium is reached, when the restoring forces
balance the deforming forces and the deformation
stops.
Stress
stress can be defined as applied force per unit area.
5
9011041155 / 9011031155
Depending upon changes in size, volume and
shape, there are three kinds of stresses.
1. Longitudinal or Tensile stress :-
2. Volume stress :-
6
9011041155 / 9011031155
3. Shearing Stress or Shear :-
7
9011041155 / 9011031155
Explanation of elasticity on the basis of molecular
model
8
9011041155 / 9011031155
Strain
There are three types of strains.
1. Longitudinal or Tensile strain
2. Volume Strain
9
9011041155 / 9011031155
3. Shearing Strain
Usually θ is very small. For small values of θ,
measured in radian, tan θ = θ
∴ Shearing strain = θ
10
9011041155 / 9011031155
As the strain is a ratio of two similar quantities, its
value is purely numerical or it doesn’t have any unit
and hence, the dimensions. Or Its dimensions can
be written as [M0L0T0].
Q.1 A body remains perfectly elastic if (a.1) The compression is large (b.1) The extension is large
(c.1) The compression or extension is small (d.1) It does not undergo a deformation
Q.2 The dimensional formula for stress is the same as that for (a.2) Work (b.2) Power (c.2) Pressure (d.2) ForceQ.3 Steel is more elastic than rubber because for a
given load the stain produced in steel, as compared to that produced in rubber is
(a.3) More (b.3) Less (c.3) Equal (d.3) Very large
11
9011041155 / 9011031155
Hooke’s law
Within elastic limit, the ratio of stress to strain is
constant for the given material. This constant is the
property of the material. It is called modulus of
elasticity.
Depending upon different stresses and strains, there
are three elastic modulii or elastic constants.
1. Young’s Modulus (Y)
12
9011041155 / 9011031155
It the ratio of tensile stress to tensile strain.
When a metal rod of length L and radius r is
elongated through l by applying force Mg,
2. Bulk Modulus (k)
It is the ratio of volume stress to volume stain.
If a balloon of volume V is compressed by changing
pressure on it by dP, its volume changes by dV
∴ Volume Stress = dP and
13
9011041155 / 9011031155
3. Modulus of Rigidity (n)
It is the ratio of shearing stress to shearing strain.
If a force F acting on area A of a body moves the
layers of the body through angle θ
Shearing stress = F/A, Shearing strain = tanθ
14
9011041155 / 9011031155
As strain is a unitless quantity, modulus of elasticity
has the units of stress, that are, N/m2 in S.I. or
dyne/cm2 in C.G.S. Its dimensions are [M1L-1T-2]
Poisson’s Ratio (σ).
“Within the elastic limit, the ratio of lateral strain to the
tensile strain is constant, which is known as Poisson’s
ratio”.
∴ Lateral strain = d/D and Tensile strain = ℓ / L
15
9011041155 / 9011031155
For homogeneous isotropic material,
In actual practice σ is always positive.
σ for cork → 0, metal → 0.3, rubber → 0.5
Poisson's ratio is unitless and dimensionless quantity.
• Ask Your Doubts
• For inquiry and registration, call 9011041155 /
9011031155.
16
9011041155 / 9011031155
17
top related