plasterroc mpr
Post on 09-Sep-2015
220 Views
Preview:
DESCRIPTION
TRANSCRIPT
-
Pla
ster
oc M
PR
Plasteroc MPR*
Prebagged high build multi purpose render
Uses
For application as either a high build internal or external crackresistant plaster.
Advantages
n Internal shrinkage control mechanism
n High build in single pass
n May be hand or machine applied
n Permits a high quality finish to be obtained
n Long life plastic packing
Description
Plasteroc MPR is a premixed sand/cement render which
incorporates blended cements, lime, graded sands,performance enhancing additives with shrinkage controlproducts.
Specification
Where shown on the contract documents, the plaster shallbe Plasteroc MPR supplied by Fosroc. The cured product
shall have drying shrinkage of
-
UAE/0362/00/C
Al Gurg Fosroc LLC
P. O. Box 657DubaiUnited Arab Emirates
TEL : (04) 285 8606FAX : (04) 285 9649
REGIONAL SALES OFFICES IN :
Important note
Fosroc products are guaranteed against defective materials and manufacture and are sold subject to its standard terms and conditions of sale, copies of which
may be obtained on request. Whilst Fosroc endeavours to ensure that the technical information on this data sheet is correct at the time of printing, it is the
customers responsibility to satisfy himself, by checking with the company that this information is still current at the time of use, that the product is suitable for
the intended application, and that the actual conditions of use are in accordance with those recommended. Because Fosroc has no control over the conditions of
use of its products, all recommendations or suggestions regarding the use of these products are made without guarantee.
ABU DHABI
Al Gurg Fosroc
TEL : 673 1779
FAX : 673 1449
BAHRAIN
YBA Kanoo
TEL : 738200
FAX : 732828
KUWAIT
Boodai
TEL : 481 7618
FAX : 483 2124
OMAN
GETCO
TEL : 771 5080
FAX : 771 7554
QATAR
Tadmur
TEL : 441 3628
FAX : 444 0812
DUBAI
Al Gurg Fosroc
TEL : 285 8787
FAX : 285 2023
www.fosrocgulf.com
* Denotes the trademark of Fosroc International Limited
Estimating
Supply
Plasteroc MPR : 20 kg bagRendercure : 1 litre pack
Yield
Plasteroc MPR : 13.5 litres per bagRendercure : 1 litre pack
Storage
12 months if stored in original unopened packs in a cool dry
environment with low humidity. Any change to therecommended storage conditions could reduce shelf life.
Precautions
Health and safety
Plasteroc MPR contains cementitious powders which, whenmixed with water or upon becoming damp, release alkalis
which can be harmful to the skin.
During use, avoid inhalation of the dust and contact with the
skin or eyes. Wear suitable protective clothing - eyeprotection, gloves and respiratory equipment (particularly inconfined spaces).
The use of barrier creams to provide additional skin protectionis also advised. In case of contact with the skin, rinse withplenty of clean water, then cleanse thoroughly with soap and
water.
In case of contact with eyes, rinse immediately with plenty ofclean water and seek medical advice. If swallowed seek
medical attention immediately - do not induce vomiting.
Fire
Plasteroc MPR is non-flammable and thus presents no firehazard.
For further information, please refer to the Product MaterialSafety Data Sheet for Plasteroc MPR.
Additional Information
Fosroc manufactures a wide range of complementary products
which include :
n waterproofing membranes & waterstops
n joint sealants & filler boards
n cementitious & epoxy grouts
n specialised flooring materials
Fosroc additionally offers a comprehensive package ofproducts specifically designed for the repair and
refurbishment of damaged concrete. Fosrocs SystematicApproach to concrete repair features the following :
n hand-placed repair mortars
n spray grade repair mortars
n fluid micro-concretes
n chemically resistant epoxy mortars
n anti-carbonation/anti-chloride protective coatings
n chemical and abrasion resistant coatings
For further information on any of the above, please consult
your local Fosroc office - as below.
top related