pro_5700-17000 liquid level gauges 07.10
Post on 05-Apr-2018
231 Views
Preview:
TRANSCRIPT
8/2/2019 Pro_5700-17000 Liquid Level Gauges 07.10
http://slidepdf.com/reader/full/pro5700-17000-liquid-level-gauges-0710 1/26
5700 BULK TANK GAUGEWITH 1/2“ cONNEcTIONS
LIQUID LEVEL GAUGES
5700 anD 17000 series GaUGe speciFications
The armored design o the gage oers maximm protection
or the sight tbe rom mechanical impact. Three sides
o the gage are protected with a metal rame, while the
ace o the gage is protected with an impact resistant
polycarbonate shield. This shield can be cstom calibrated
to read tank volme or any other desired calibration. Please
see page 12 or standard shield calibration options. A wide
variety o wetted materials and seals are available to ensre
compatibility with whatever fid is being sed. For monting
prposes, a monting lg is welded to the back o the gage.
The 5700 series has 1/2” MNPT x 3/8” FNPT threaded
process connections. 1/2” to 2” fanged process connections
are also available. The standard sight tbe is 5/8” O.D. glass.
Other sight tbe options are also available pon reqest.
The 17000 gage is tted with 1” MNPT process
connections (fanged process connections are also available).
The standard sight tbe is 1” O.D. glass, which makes it
ideal or viscos liqids.
special GaUGe application - cheMical
injection systeMs
5700 and 17000 gages are sed to calibrate chemical
injection systems. The injection rate o a chemical metering
pmp is checked by closing a valve between the gage and
the chemical storage tank and observing the change in fid
height in one minte. using the rate scale on the ront o
the shield, cont the nmber o marks the fid level passed
dring the one minte test period. This will give yo the
actal chemical pmp rate. I the rate is not the one desired,
make an adjstment to the chemical pmp eed rate, andcondct as many one minte tests as is necessary to set the
chemical pmp to the rate desired.
5700 Bulk Tank Gauge with
Optional Flange Connection
The 5700 and 17000 series gauges are armored liquid level
gauges with NPT or fanged onnetions at eah end. These
gauges provide a visual means or heking the ontents
o a bulk tank. They an also be used to set and monitor
the injetion rate o a hemial metering pump. The gauges
operate in low to medium pressure appliations up to 500 psig.
17000 BULK TANK GAUGEWITH 1“ cONNEcTIONS
8/2/2019 Pro_5700-17000 Liquid Level Gauges 07.10
http://slidepdf.com/reader/full/pro5700-17000-liquid-level-gauges-0710 2/2
7
REquESTED By: COMPANy:
ADDRESS: CITy: STATE: ZIP:
PHONE: FAX: EMAIL :
5700 BULK TANK GAUGe
Mer f cnrun
C=Zinc Plated Carbon Steel
A=Stainless Steel
W=316 Stainless Steel Wetted
Parts w/Carbon Steel Frame
PC=PVC Wetted Parts w/Carbon
Steel Frame
PS=PVC Wetted Parts w/
Stainless Steel Frame
Other (Please Speciy)
Fr Fnged Mde, see
on c, a, pc, r ps ny
se Mer
V=Fluorocarbon
A=Afas
B=Buna-N
T=(5700) PTFE
(17000) FEP Encapsulated
Silicone
E=Ethylene Propylene
shed on*
L=Clear Polycarbonate
H=Height Scale
RH=Rate Height Scale
MH=Metric Height Scale
MRH=Metric Rate Height Scale
M=Expanded Metal
* See page 12 or shield descriptions
** Based on application data provided, KENCO will select the appropriate sight tube material, i.e. high pressure glass.
ORDeRING sYsTeM
5700 & 17000 sere leve Guge
Guge sye
5700=Gauge w/ 1/2”
MNPT Connections
17000=Gauge w/ 1”
MNPT Connections
Fnge on
N=None (Leave Blank)
FL50=1/2” 150# R.F. Flange
FL75=3/4” 150# R.F. Flange
FL10=1” 150# R.F. Flange
FL15=1-1/2” 150# R.F. Flange
FL20=2” 150# R.F. Flange
over lengh fGuge (inhe)
sgh tube on**
GS=5/8” O.D. Glass (5700)
1” O.D. Glass (17000)
RL=5/8” O.D. Redline Glass (5700)
1” O.D. Redline Glass (17000)
Mxmum wrkng
preure (psiG) Mxmum oerng
temerure (°F)
sem
S=Steam Application
NS=Non-Steam Application
17000 BULK TANK GAUGe
• Example Order Number: 5700-52-CVH- GS-ATM-200-NS
• Drawings above represent models with metal process connections.
top related