prusa mini side handle - easy print€¦ · 4.76 hrs 1 pcs f 0.20 mm k 0.40 mm h 8 63.00 g d mini...

4.76 hrs

1 pcs

f

0.20 mm

k

0.40 mm

h

8

63.00 g

d

MINI

Summary

I liked the handle from MattStultz, but wanted something easier to printwithout any fillets. Designed this from my own measurements. Edges areall chamfered for easy print. Finger slots and alignment notches added. Iuse 2 M5 x 45mm hex screws and washers with T-nuts to attach to frame.

3D Printers > 3D Printers - Upgrades

Designed to be printed on its side for best strength. I used 5 perimetersand 50% cubic infill, which is overkill but I would recommend more thanthe stock 2 perimeters and 20% infill for this one. You can print on the sideor on the back. Specifically designed so no support needed with alloverhangs at 45o (except for screw holes, which are not a problem in anyorientation). Printed in Prusament Yellow Gold PETG to match the rest ofthe parts I printed for the MINI. You can print this in PLA instead if youwant (I can't since PLA definitely does not stick to my MINI's textured plate- yes, I tried everything).

Bioluminous

Prusa MINI SideHandle - Easy Print

VIEW IN BROWSER

updated 11. 3. 2020 | published 11. 3. 2020

Print Files (.gcode) DOWNLOAD ALL FILES

7.1 MB

4.76 hrs f 0.20 mm k 0.40 mm h PET 63.10 g d MINI

updated 22. 2. 2020

Model Files (.stl, .3mf, .obj, .amf) DOWNLOAD ALL FILES

53.6 KBupdated 22. 2. 2020

228.8 KBupdated 22. 2. 2020

This remix is based on

Prusa MINI Handle

by MattStultz

License

This work is licensed under a Creative Commons (4.0 International License)

Attribution-NonCommercial

✖ | Sharing without ATTRIBUTION ✔ | Remix Culture allowed

prusa-mini-handle_02mm_petg_mini_4h46m.gcode

prusa-mini-handle.3mf

prusa-mini-handle.stl

✖ | Commercial Use ✖ | Free Cultural Works ✖ | Meets Open Definition