re-rake detailstable of contents re-rake details fe2010 - cbc - rake detail w/wall panel fe2015 -...

RAKE DETAILSFE2010-CBC - RAKE DETAIL w WALL PANELSFE2015-CBC - RAKE DETAIL w ROOF JOIST & WALL PANELSFE2050-CBC - OPEN RAKE DETAIL w WALL CONSTRUCTION BY OTHERSFE2055-CBC - STARTING RAKE DETAIL w JOIST & WALL SYSTEM BY OTHERSFE2610-CBC - STARTING RAKE DETAIL w INSULATED WALL SYSTEMFE2615-CBC - RAKE DETAIL w ROOF JOIST & INSULATED WALL SYSTEM

TABLE OF CONTENTS

SL

LOWER INSULATION

ROOF SECONDARY MEMBER (SHAPE VARIES)

UPPER INSULATION

WALL INSULATION

R-Boost™ RAKE DETAIL

FE2010RAKE DETAIL w/ STANDARD WALL PANELS

H1020 FASTENER

RAKE TRIM MK. TR-50

RAKE TRIM CLEAT, TR-27 w/WALL SMS, MK. (H1061) @ 12" O.C.

*"R"-PANEL BM-8REVERSE "R" BM-7

WALL PANEL

"A"-PANELREVERSE "A"

BM-6BM-5

MARK No.OUTSIDE PANEL CLOSURES

*

INSULATION BRIDGE MK. EIB24

SEE ABOVE FOR FASTENERREQUIREMENTS FOR IRC &INSULATION TIE OFF

RAKE SUPPORT CLIP MK. CL21STw/ (2) H1220 FASTENERSAT EACH PURLIN(SEE DETAIL ABOVE)

VARIES

TOP

OFBR

IDGE

TOP O

FPA

NEL

START/END DIM. / CUT PANEL DIM.(SEE PLAN)

1/4"STEEL LINE

THERMAL BLOCK (IF REQ'D)

H1020 FASTENERAT EACH SUPPORT

WALL PANEL

RAKE ANGLEMK. MAR01

RAKE SUPPORTANGLE RSA_

WALL STRUCTURAL FASTENERMK. (H1041) @ 6" O.C.

CLOSURE

RETAINER CEE MK. IRC

FASTENER, MK.(H1030) @ 6"O.C.

(2) H1220 FASTENERS AT EACHCL21ST UNDER RAKE ANGLEFOR SUPPORT (DO NOT ATTACHTO TO RAKE ANGLE)

ALT. CL21ST SUPPORT CLIP INSTALLATION DETAIL

H1020/H2200 EACH END & 2'-0"O.C. BETWEEN PURLINS TO TIEDOWN INSULATION

INSULATION BRIDGEMK. EIB24

RAKE ANGLEMK. MAR01

RETAINER CEEMK. IRC

(2) H1220FASTENERS

*

**

RAKE SUPPORT CLIP CL21ST@ EACH PURLIN

ERECTOR NOTE:STARTING RAKE CONDTION IS SHOWN. BRIDGE PREPARATION WILL VARY BETWEEN THE STARTINGAND ENDING RAKES, SEE BRIDGE INSTALLATION DETAILS FOR SPECIFIC BRIDGE REQUIREMENTS.

*

H1020FASTENERS

*

H1020 FASTENERAT EACH SUPPORT(2) H1070 FASTENERS @ EACH PURLINPRIOR TO INSULATION BEING INSTALLED

USED WHEN WALL PANELS ARE INSTALLED FIRST

SUPER TALL 4 7/8"TALL 3 7/8"***

ROOF PANEL

3/4" TAPE MASTIC,MK. (H3000)

H1020 AT 24" O.C. W/ 3/4" TAPE MASTIC, MK. (H3000)BETWEEN ROOF PANEL & RAKE SUPPORT ANGLE

Detail Size (W x H) :By :

: CERTIFIED ERECTION DETAILSIssuedIssued

Detailer Notes:

Download the DWG file by clicking here.

RAKE DETAILSR-Boost™ ELEVATED INSULATION SYSTEM

FE2010 - RAKE DETAIL w/ WALL PANELS

02.12.21 (MR2021.003)DLM

1 x 2

1) Default option for Wall Closures is shown as being required. Detailer must manually remove illustrations if needed.

SL

LOWER INSULATION(NOT BY NBG)

ROOF JOIST

UPPER INSULATION(NOT BY NBG)

WALLINSULATION

FE2015RAKE DETAIL w/ ROOF JOIST AND STANDARD WALL PANELSR-Boost™ RAKE DETAIL

RAKE ANGLEMK. MAR01

1/4 - 14 X 1 1/4"(H1020) FASTENER

RAKE SUPPORT CLIP MK. CL21STw/ (2) H1220 FASTENERS @ EACHJOIST (INSTALL PRIOR TO WALLPANEL SEE DETAIL ABOVE)

INSULATION BRIDGE MK. EIB24

*"R"-PANEL BM-8REVERSE "R" BM-7

WALL PANEL

"A"-PANELREVERSE "A"

BM-6BM-5

MARK No.OUTSIDE PANEL CLOSURES

*

(2) H1220 FASTENERS @ EACHJOIST UNDER RAKE ANGLEFOR SUPPORT.(DO NOT ATTACH TORAKE ANGLE)

H1070 FASTENER@ EACH SUPPORT

WALL PANEL

RETAINER CEE MK. IRC

PANEL CLIP w/(2)H1020 FASTENERS

THERMAL BLOCK (IF REQ'D)

START/END DIM. / CUT PANEL DIM.(SEE PLAN)

1/4"STEEL LINE

CLOSURE

ERECTOR NOTE:STARTING RAKE CONDTION IS SHOWN. BRIDGE PREPERATION WILLVARY BETWEEN THE STARTING AND ENDING RAKES, SEE BRIDGEINSTALLATION DETAILS FOR SPECIFIC BRIDGE REQUIREMENTS.

*

*

ALT. CL21ST SUPPORT CLIP INSTALLATION DETAIL

H1070/H2200 EACH END & 2'-0"O.C. BETWEEN PURLINS TO TIEDOWN INSULATION

INSULATION BRIDGEMK. EIB24

RAKE ANGLEMK. MAR01

RETAINER CEEMK. IRC

(2) H1220FASTENERS

*

**

RAKE SUPPORT CLIP CL21ST@ EACH PURLIN

H1020FASTENERS

H1070 FASTENERAT EACH SUPPORT(2) H1070 FASTENERS @ EACH PURLINPRIOR TO INSULATION BEING INSTALLED

USED WHEN WALL PANELS ARE INSTALLED FIRST

SUPER TALL 4 7/8"TALL 3 7/8"***

SEE ABOVE FOR FASTENERREQUIREMENTS FOR IRC &INSULATION TIE OFF

ROOF PANEL

RAKE TRIM CLEAT, TR-27 w/WALL SMS, MK. (H1061) @ 12" O.C.

WALL STRUCTURAL FASTENERMK. (H1041) @ 6" O.C.

RAKE TRIM MK. TR-50

RAKE SUPPORTANGLE RSA_

FASTENER, MK.(H1030) @ 6"O.C.3/4" TAPE MASTIC,MK. (H3000)

H1020 AT 24" O.C. W/ 3/4" TAPE MASTIC, MK. (H3000)BETWEEN ROOF PANEL & RAKE SUPPORT ANGLE

Detail Size (W x H) :By :

: CERTIFIED ERECTION DETAILSIssuedIssued

Detailer Notes:

Download the DWG file by clicking here.

RAKE DETAILSR-Boost™ ELEVATED INSULATION SYSTEM

FE2015 - RAKE DETAIL w/ROOF JOIST & WALL PANELS

02.12.21 (MR2021.003)DLM

1 x 2

1) WALL CLOSURES SUPPLIED IS THE DEFAULT OPTION WITH THIS DETAIL. IF CLOSURES ARE NOTREQUIRED PER CONTRACT. DETAILER MUST MODIFY ILLUSTRATIONS ACCORDINGLY.

LOWER INSULATION

ROOF SECONDARY MEMBER (SHAPE VARIES)

INSULATION BRIDGE MK. EIB24

R-Boost™ OPEN RAKE DETAIL

FE2050STARTING RAKE DETAIL, OPEN FOR WALL w/CONSTRUCTION BY OTHERS

WALL SYSTEM(BY OTHERS)

RAKE TRIM TR-50

ROOF PANELTAPE SEALANT

RAKE TRIMCLEAT MK. TR-27

H1020 FASTENER

THERMAL BLOCK (IF REQ'D)

PANEL CLIP W/(2)H1020 FASTENERS

(2) H1220 FASTENERS@ EACH PURLINUNDER RAKE ANGLEFOR SUPPORT. (DONOT ATTACH TORAKE ANGLE)

RAKE ANGLEMK. MAR02

FIELD CUTBRIDGE

RETAINER CEEMK. IRC__

RAKE SUPPORT CLIP MK. CL21ST w/ (2) H1220FASTENERS @ EACH PURLIN (INSTALL PRIOR TOWALL PANEL SEE DETAIL ABOVE)

FASTENER1'-0"O.C. MAX.(BY OTHERS)

RAKE SUPPORT ANGLE RSA_

START/END DIM. / CUT PANEL DIM. (SEE PLAN)1/4"STEEL LINE

(NOT BY NBG)

(NOT BY NBG)

*

FASTENER MK.(H1030) @ 6"o.c.

ERECTOR NOTE:STARTING RAKE CONDTION IS SHOWN. BRIDGE PREPERATION WILLVARY BETWEEN THE STARTING AND ENDING RAKES, SEE BRIDGEINSTALLATION DETAILS FOR SPECIFIC BRIDGE REQUIREMENTS.

*

UPPER INSULATIONRAKE ANGLEMK. MAR02

SEE ABOVE FOR FASTENERREQUIREMENTS FOR IRC &INSULATION TIE OFF

H1020 AT 24" O.C. W/ 3/4" TAPE MASTIC, MK. (H3000)BETWEEN ROOF PANEL & RAKE SUPPORT ANGLE

ALT. CL21ST SUPPORT CLIP INSTALLATION DETAIL

H1020/H2200 EACH END & 2'-0"O.C. BETWEEN PURLINS TO TIEDOWN INSULATION

INSULATION BRIDGEMK. EIB24

RAKE ANGLEMK. MAR01

RETAINER CEEMK. IRC

(2) H1220FASTENERS

*

**

RAKE SUPPORT CLIP CL21ST@ EACH PURLIN

H1020FASTENERS

H1020 FASTENERAT EACH SUPPORT(2) H1070 FASTENERS @ EACH PURLINPRIOR TO INSULATION BEING INSTALLED

USED WHEN WALL PANELS ARE INSTALLED FIRST

SUPER TALL 4 7/8"TALL 3 7/8"***

Detail Size (W x H) :By :

: CERTIFIED ERECTION DETAILSIssuedIssued

Detailer Notes:

Download the DWG file by clicking here.

RAKE DETAILSR-Boost™ ELEVATED INSULATION SYSTEM

FE2050 - OPEN RAKE DETAIL w/ WALL CONSTRUCTION BY OTHERS

02.12.21 (MR2021.003)DLM

1 x 2

1) N/A

R-Boost™ OPEN WALL RAKE DETAIL

FE2055STARTING RAKE DETAIL w/ JOIST AND WALL OPEN FOR WALL SYSTEM BY OTHERS

LOWER INSULATION

UPPER INSULATION

INSULATION BRIDGEMK. EIB24

THERMAL BLOCK (IF REQ'D)

PANEL CLIP W/(2)H1020 FASTENERS

ROOF JOIST

WALL SYSTEM(BY OTHERS)

(2) H1220 FASTENERS @EACH JOIST UNDER RAKEANGLE FOR SUPPORT.(DO NOT ATTACH TORAKE ANGLE)

RAKE ANGLEMK. MAR02

H1070 FASTENER@ EACH SUPPORT

RAKE ANGLEMK. MAR02

FIELD CUTBRIDGE

H1020 FASTENER

RETAINER CEEMK. IRC__

RAKE TRIMCLEAT MK. TR-27

FASTENER12" O.C. MAX.(BY OTHERS)

(NOT BY NBG)

(NOT BY NBG)

START/END DIM. / CUT PANEL DIM. (SEE PLAN)1/4"STEEL LINE

C OF 1ST PANEL RIBL

*

ERECTOR NOTE:STARTING RAKE CONDTION IS SHOWN. BRIDGE PREPERATION WILLVARY BETWEEN THE STARTING AND ENDING RAKES, SEE BRIDGEINSTALLATION DETAILS FOR SPECIFIC BRIDGE REQUIREMENTS.

*

ALT. CL21ST SUPPORT CLIP INSTALLATION DETAIL

H1070/H2200 EACH END & 2'-0"O.C. BETWEEN PURLINS TO TIEDOWN INSULATION

INSULATION BRIDGEMK. EIB24

RAKE ANGLEMK. MAR01

RETAINER CEEMK. IRC

(2) H1220FASTENERS

*

**

RAKE SUPPORT CLIP CL21ST@ EACH PURLIN

H1020FASTENERS

H1070 FASTENERAT EACH SUPPORT(2) H1070 FASTENERS @ EACH PURLINPRIOR TO INSULATION BEING INSTALLED

USED WHEN WALL PANELS ARE INSTALLED FIRST

SUPER TALL 4 7/8"TALL 3 7/8"***

SEE ABOVE FOR FASTENERREQUIREMENTS FOR IRC &INSULATION TIE OFF

ROOF PANEL

RAKE TRIM MK. TR-50

RAKE SUPPORTANGLE RSA_

FASTENER, MK.(H1030) @ 6"O.C.3/4" TAPE MASTIC,MK. (H3000)

H1020 AT 24" O.C. W/ 3/4" TAPE MASTIC, MK. (H3000)BETWEEN ROOF PANEL & RAKE SUPPORT ANGLE

RAKE SUPPORT CLIP MK. CL21ST w/ (2) H1220FASTENERS @ EACH PURLIN (INSTALL PRIOR TOWALL PANEL SEE DETAIL ABOVE)

Detail Size (W x H) :By :

: CERTIFIED ERECTION DETAILSIssuedIssued

Detailer Notes:

Download the DWG file by clicking here.

RAKE DETAILSR-Boost™ ELEVATED INSULATION SYSTEM

FE2055 - STARTING RAKE DETAIL w/ ROOF JOIST & WALL SYSTEM BY OTHERS

02.12.21 (MR2021.003)DLM

1 x 2

1) N/A

SL

LOWER INSULATION

ROOF SECONDARY MEMBER (SHAPE VARIES)

UPPER INSULATION

R-Boost™ RAKE DETAIL FE2610RAKE DETAIL w/ INSULATED WALL PANELS

INSULATEDWALL PANEL

38"Ø BEAD OF BUTYL CAULKMARRY VERTICAL CAULKTO CONTINUOUS CAULK

H1020 FASTENER

(2) H1220 FASTENERS@ EACH PURLIN UNDERRAKE ANGLE FORSUPPORT (DO NOTATTACH TO RAKE ANGLE)

INSULATION BRIDGE MK. EIB24

RAKE TRIM CLEAT TR-27 w/#14x 7/8" SMS, (BS-2) @ 1'-0" O.C.

RETAINER CEEMK. IRC

H1020 FASTENER@ EACH SUPPORT

RAKE ANGLEMK. MAR01

CONTINUOUS 3/8" Ø BEAD OF BUTYLCAULK BETWEEN PANEL & EAVE ZEE

CONTINUOUS 3/8" Ø BEAD OF BUTYLCAULK IN VERTICAL JOINT (DO NOT OVERFILL)

PANEL CLIP WC-01w/(2) MEMBER FASTENERS

PANEL CLIP w/(2)H1020 FASTENERS

THERMAL BLOCK (IF REQ'D)

1/4"STEEL LINE

(NOT BY NBG)

(NOT BY NBG)

*Adjust

*

ERECTOR NOTE:STARTING RAKE CONDTION IS SHOWN. BRIDGE PREPERATION WILLVARY BETWEEN THE STARTING AND ENDING RAKES, SEE BRIDGEINSTALLATION DETAILS FOR SPECIFIC BRIDGE REQUIREMENTS.

*

ALT. CL21ST SUPPORT CLIP INSTALLATION DETAIL

H1020/H2200 EACH END & 2'-0"O.C. BETWEEN PURLINS TO TIEDOWN INSULATION

INSULATION BRIDGEMK. EIB24

RAKE ANGLEMK. MAR01

RETAINER CEEMK. IRC

(2) H1220FASTENERS

*

**

RAKE SUPPORT CLIP CL21ST@ EACH PURLIN

H1020FASTENERS

H1020 FASTENERAT EACH SUPPORT(2) H1070 FASTENERS @ EACH PURLINPRIOR TO INSULATION BEING INSTALLED

USED WHEN WALL PANELS ARE INSTALLED FIRST

SUPER TALL 4 7/8"TALL 3 7/8"***

SEE ABOVE FOR FASTENERREQUIREMENTS FOR IRC &INSULATION TIE OFF

RAKE TRIM "TR-50", * Note: (Adjust Trim asrequired for Insulated Wall Panel thickness).

ROOF PANEL

RAKE SUPPORTANGLE RSA_

FASTENER, MK.(H1030) @ 6"O.C.3/4" TAPE MASTIC,MK. (H3000)

H1020 AT 24" O.C. W/ 3/4" TAPE MASTIC, MK. (H3000)BETWEEN ROOF PANEL & RAKE SUPPORT ANGLE

RAKE SUPPORT CLIP MK. CL21ST w/ (2) H1220FASTENERS @ EACH PURLIN (INSTALL PRIORTO WALL PANEL SEE DETAIL ABOVE)

START/END DIM. / CUT PANEL DIM. (SEE PLAN)

Detail Size (W x H) :By :

: CERTIFIED ERECTION DETAILSIssuedIssued

Detailer Notes:

Download the DWG file by clicking here.

RAKE DETAILSR-Boost™ ELEVATED INSULATION SYSTEM

FE2610 - STARTING RAKE DETAIL w/ INSULATED WALL SYSTEM

02.12.21 (MR2021.003)DLM

1 x 2

1) N/A

LOWER INSULATION(NOT BY NBG)

ROOF JOIST

UPPER INSULATION(NOT BY NBG)

WALL INSULATION

FE2615RAKE DETAIL w/ JOIST & INSULATED WALL PANELR-Boost™ RAKE DETAIL

SL

INSULATEDWALL PANEL

CONTINUOUS BUTYL CAULKIN VERTICAL JOINT(DO NOT OVERFILL)

H1020 FASTENER

RAKE TRIM "TR-50", * Note: (Adjust Trim asrequired for Insulated Wall Panel thickness).

ROOF PANEL

INSULATION BRIDGE MK. EIB24

38"Ø BEAD OF BUTYL CAULK

MARRY VERTICAL CAULKTO CONTINUOUS CAULK

RAKE TRIM CLEAT TR-27W/ #14x 7/8" SMS, (BS-2)@ 12" O.C.

PANEL CLIP W/(2)H1020 FASTENERS

THERMAL BLOCK (IF REQ'D)

START/END DIM. / CUT PANEL DIM.(SEE PLAN)

1/4"STEEL LINE

RAKE ANGLEMK. MAR01

RETAINER CEEMK. IRCCONTINUOUS 3/8" Ø BEAD OF BUTYLCAULK BETWEEN PANEL & EAVE ZEE

H1070 FASTENER@ EACH JOIST

(2) H1220 FASTENERS@ EACH JOIST UNDERRAKE ANGLE FORSUPPORT.(DO NOT ATTACH TORAKE ANGLE)

PANEL CLIP WC-01w/(2) MEMBER FASTENERS

VARIES

TOP

OF P

ANEL

TOP OF PANEL

7 1/2"

MIN

.TO

P OF

BRI

DGE

*Adjust

*

ALT. CL21ST SUPPORT CLIP INSTALLATION DETAILUSED WHEN WALL PANELS ARE INSTALLED FIRST

ERECTOR NOTE:STARTING RAKE CONDTION IS SHOWN. BRIDGE PREPERATION WILLVARY BETWEEN THE STARTING AND ENDING RAKES, SEE BRIDGEINSTALLATION DETAILS FOR SPECIFIC BRIDGE REQUIREMENTS.

*

H1070/H2200 EACH END & 2'-0"O.C. BETWEEN PURLINS TO TIEDOWN INSULATION

INSULATION BRIDGEMK. EIB24

RAKE ANGLEMK. MAR01

RETAINER CEEMK. IRC

(2) H1220FASTENERS

*

**

RAKE SUPPORT CLIP CL21ST@ EACH PURLIN

H1020FASTENERS

SUPER TALL 4 7/8"TALL 3 7/8"***

SEE ABOVE FOR FASTENERREQUIREMENTS FOR IRC &INSULATION TIE OFF

H1070 FASTENERAT EACH SUPPORT(2) H1070 FASTENERS @ EACH PURLINPRIOR TO INSULATION BEING INSTALLED

RAKE SUPPORTANGLE RSA_

FASTENER, MK.(H1030) @ 6"O.C.3/4" TAPE MASTIC,MK. (H3000)

H1020 AT 24" O.C. W/ 3/4" TAPE MASTIC, MK. (H3000)BETWEEN ROOF PANEL & RAKE SUPPORT ANGLE

RAKE SUPPORT CLIP MK. CL21ST w/ (2) H1220FASTENERS @ EACH PURLIN (INSTALL PRIORTO WALL PANEL SEE DETAIL ABOVE)

Detail Size (W x H) :By :

: CERTIFIED ERECTION DETAILSIssuedIssued

Detailer Notes:

Download the DWG file by clicking here.

RAKE DETAILSR-Boost™ ELEVATED INSULATION SYSTEM

FE2615 - RAKE DETAIL w/ROOF JOIST & INSULATED WALL SYSTEM

02.12.21 (MR2021.003)DLM

1 x 2

1) PANEL REQUIRES 2 1/2" MINIMUM BEARING ON RAKE ANGLE TO ALLOW ROOM FOR (2) FASTENERS.