research - environment & sustainability. gcse resistant materials - major project: research –...
Post on 25-Dec-2015
228 Views
Preview:
TRANSCRIPT
GCSE Resistant Materials - Major Project:
Research – Sustainability and Environment
Sustainability & EnvironmentTimed Task
The TIMED TASK for these two areas of research will take place on Monday 1st July (groups 6 and 7)
Tuesday 2nd July (groups 1 and 2)
You MUST make sure that you have all the necessary information ready and prepared for this session.
If you need any help with the preparation for this you should make use of the lunchtime and after school sessions.
GCSE Resistant Materials - Major Project:
Research – Environment and Sustainability
Design Activity Mark Scheme
Research - (6 marks)
This will be made up of 5 sections
Research is superficial and does not focus on the design needs identified in the analysis.Analysis of existing products is insufficient to aid the writing of specification criteria.
Research is general, focusing on some of the design needs identified in the analysis.Product analysis is used to inform the writing of some specification criteria.
Research is selective and focuses on the needs identified in the analysis.The performance, materials, components processes, quality and sustainability issues of relevant existing products are explored in sufficient detail to aid the writing of specification criteria.
1 2 3 4 5 6
GCSE Resistant Materials - Major Project:
Research – Environment and SustainabilityResearch
Your research will be made up of five sectionsThese are taken from your brief analysis
You are now going to work through each area which will make up your research section
GCSE Resistant Materials - Major Project:
Research – Environment Environment
This area of research will demonstrate to the examiner that you are aware that the ENVIRONMENT in which a product is going to be used can have a significant effect on its design.
Things that you could look at and consider are:
The space that is available
Where the product is going to be placed
Who has access to this area
The surrounding colours / materials
This only needs to be ½ a page
GCSE Resistant Materials - Major Project:
Research – Environment
Environment
For all of the areas that you consider, you should try to come up with some definite and accurate information that you will
be able to:
• Use to help write your specification
• Use to come up with some innovative ideas
• Use to help to test and evaluate your ideas
GCSE Resistant Materials - Major Project:
Research – Environment
Environment
This section of work should start with an INTRODUCTION which should explain why you think it is important to research
this area.
It is up to you to think about how you display all the information on this half of the page, but it MUST include a PICTURE of the area you are describing and where your
product will be used.
You should then complete this section with a CONCLUSION which sums up which are the most relevant and important pieces of information and states how you are going to use
them.
GCSE Resistant Materials - Major Project:
Research – Sustainability SustainabilityThis is important as it shows the examiner that you are able to
address Sustainability issues within your own designing and making – just as they do in industry.
You need to make sure that the issues that you discuss link to YOUR context, not someone else's.
You need to look at the following headings and write what is relevant to your product:
Reduce
Recycle
Reuse
Rethink
Use obvious, measurable pointsThis only needs to be ½ a page
GCSE Resistant Materials - Major Project:
Research – Sustainability
Reduce
How are you going to reduce the waste that you create?
For example: I could use hand processes that do not use power
How are you going to reduce the amount of material that you use?
How are you going to reduce the amount of energy and electricity that you use whilst making your product?
You could use materials supplied by FSC – find out who this is!
For example:
I am going to ensure that I use as little material as possible. I will do this by planning my practical work carefully and
drawing up a clear cutting list. I will then check my marking out before I start so that my measurements are correct and use all tools and pieces of equipment carefully and safely to
reduce the risk of mistakes occurring.
GCSE Resistant Materials - Major Project:
Research – Sustainability
Recycle
Are you able to use any recycled materials?
Would it be suitable to use recycled materials?
Would any part of your product be suitable to be recycled afterwards?
What do you need to think about in terms of recycling your product?
For example:
To help the environment I could look at how my product could be broken down and recycled at the end of its use.
Think about finishes, adhesives, components, etc – can these be recycled?
GCSE Resistant Materials - Major Project:
Research – Sustainability
Reuse
Can any part of your product use parts from other products who have come to the end of their life span?
These could include handles, hinges, etc
Why would this be beneficial?
For example:
As I am making a jewellery box I could look to using pieces of broken jewellery to fashion into handles or decorative aspects on my final product. If done to a high standard this could help
to improve the aesthetic appeal of my product.
Give some examples of how this could be done
GCSE Resistant Materials - Major Project:
Research – Sustainability
Rethink
At this point you will be highlighting that, before you start to make your product, you will consider the following points:
Will your idea do the job effectively?
Have you chosen to use the best materials?
Are you planning on using the most efficient manufacturing processes?
Is your final idea innovative enough to make an impact on the market?
ExampleBefore I start to make my final idea I intend to do a last check list in case I need
to rethink any aspects of it! Such as ……………
top related