rubberprofielen uitgave 2010
Post on 15-Oct-2021
5 Views
Preview:
TRANSCRIPT
RubberprofielenUitgave 2010
Rubberprofielen - Uitgave 2010
2
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
Rubberprofielen - Uitgave 2010
3
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
Algemeen ................................................................ 4Inleiding ................................................................. 4Productie van rubber ................................................. 5Toleranties .............................................................. 6Rubberkwaliteiten ................................................. 7Datasheets ............................................................. 8Profielcalculator ....................................................... 9
Deel 1: Volrubber .................................................... 10
1. Rondsnoeren - vierkant/rechthoekig ................... 10
2. P-profiel / muzieknoot ....................................... 14
3. U-profiel .......................................................... 17
4. L-profiel .......................................................... 22
5. T-profiel .......................................................... 23
6. Weegbrug ........................................................ 24
7. Glasdrager / Montagerichtlijnen ......................... 25
8. Glaswagenprofiel ............................................... 27
9. Steengrijper ...................................................... 27
10. Stootbuffer ...................................................... 28
11. Sluisprofielen .................................................... 29
12. Luikprofiel ....................................................... 29
13. Tankdeksel ...................................................... 30
14. Voegprofielen .................................................... 31
15. H-profielen ...................................................... 31
16. Groefprofielen .................................................... 32
17. E-profielen ........................................................ 33
18 Holle profielen .................................................. 34
19. Klemprofielen ................................................... 35
Inhoud
Deel 2: TPeRX® ....................................................... 43
Deel 3: Silicone ..................................................... 451. THT-profiel ....................................................... 472. Specials ............................................................ 48
Deel 4: Cel- en sponsrubber ................................... 491. Celrubber ......................................................... 502. Sponsrubber .................................................... 52
Deel 5: Specials .................................................... 591. Veiligheid / bescherming ................................. 602. Opblaasbare dichtingen .................................... 613. EMI-profielen .................................................... 624. Bio-Higienic® ................................................... 63
Deel 6: Europese richtlijnen ................................. 64
Deel 7: Index artikelnummers .............................. 65
Rubberprofielen - Uitgave 2010
4
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
Het ontwikkelingstraject van een rubber-product van tekentafel tot de uit eindelijke serieproductie ziet er als volgt uit:
Eerste Ontwerp ▼
Product-ontwikkeling
▼
Vastleggen van product specificaties(rubbercompound/toleranties/prijs/
verpakking)
▼
Productie van matrijs en monsters
▼
Beoordeling van de monsters
▼
goedkeuring
▼
serie levering
Met deze nieuwe uitgave 2009 willen we naast onze productvoorstelling ook tech-nisch advies geven. U vindt hier dus naast een compleet overzicht van ons zeer breed programma profielen in vol-, spons- en cel-rubber ook montagevoorschriften, lijmen, hulpmiddelen, voorbeelden van toepassin-gen en eigenschappen van rubber.
Bij de meeste hoofdstukken staat aange-duid welke de voorraadprofielen zijn alsook een selectie van welke profielen/matrijzen beschikbaar zijn. Indien het gewenste pro-fiel niet in deze catalogus staat, contacteer ons dan want wij kunnen zoeken in een nog groter bestand en indien nodig maken we het op maat. Zo goed als alles is moge-lijk qua vorm en qua materiaal.
Wie aan ERIKS denkt, denkt aan rubber. Al ruim 60 jaar staat Eriks voor innovatie en kwaliteit in rubbertechniek. Deze ervaring en de jarenlange samenwer-king met de belangrijkste grondstofprodu-centen is de ideale basis voor een partner-ship tussen uw bedrijf en ERIKS
ERIKS beschikt over een grote hoeveel-heid standaard vormwerk artikelen zoals profielen, balgen, koppelingsringen en tules. Al deze producten zijn uit voorraad leverbaar.Toch bestaat het grootste gedeelte van onze voorraad uit custommade artikelen. Veel van deze artikelen zijn door onze sales engineers in nauwe samenwerking de klant ontwikkeld. Zij zitten dagelijks op de weg om daar waar nodig technische ondersteuning te bieden en doorlopen met onze klanten het volle-dige ontwikkelings traject.
Algemeen: Inleiding
Rubberprofielen - Uitgave 2010
5
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
Hoe wordt rubber gefabriceerd? Over het algemeen verloopt de productie van elastomeer producten in 3 fasen:
1. Mengen:Voormengen van de grondstoffen zoals rubber, vulstoffen, weekmakers enz. in een kneed-machine of met een wals. Eindmengen (tenminste toevoeging van vulkanisatie- en versnel-lingsmiddelen), resp. homogeniseren op de wals of ook in de kneedmachine.Resultaat: ongevulkaniseerd rubbermengsel gereed voor de productie in de vorm van zgn. vellen of granulaat.
2. Vormgeving:De vormgeving kan geschieden:• door persen• door kalanderen• met de hand• door spuitgieten• door extruderen• dompelen (ballonachtige delen)Resultaat: ongevulkaniseerd halffabrikaat of gevulkaniseerde fabrikaten of halffabrikaten.
3. Vulkanisatie:Vulkanisatie is afhankelijjk van de tijd en de temperatuur. De vulkanisatie kan plaatsvin-den in een voorverwarmde matrijs, een speciale vulkanisatieoven (autoclaaf), of continu (extrusie) d.m.v. zoutbad, UHF, e.a. Elastomeren bestaan uit mengsels die naast rubber-polymer een veelheid van additieven bevatten. De aggregatievorm van de grondstoffen is verschillend. Rubber is meestal een taaie massa, terwijl bijv. de weekmakers vloeibaar of pasta-achtig kunnen zijn; andere bestanddelen zijn weer korrelig. Omdat de eigenschap-pen van elastomeren niet alleen van de mengbestanddelen afhankelijk zijn, maar ook van de opname van de bestanddelen in de rubber (dus de mengproductie), is het van belang dat volgens het mengvoorschrift, waarbij o.m. de volgorde waarin de bestanddelen worden toegevoegd en de mengtijden zijn bepaald, wordt gewerkt. De mengbestanddelen worden gedoseerd naar gewicht of volume en in de kneedmachine gebracht. Na het mengen in de kneder, wordt de rubber op een wals volledig gemengd en gehomogeniseerd. Na het mengen wordt het mengsel in de vorm van vellen van de walsen gehaald en gekoeld met lucht of water. Om een constante kwaliteit te bewerkstelligen worden de grondstoffen voor de menging en de vellen (rubbermengsels) op kwaliteit gecontroleerd. Alleen de juiste kwaliteit wordt verder verwerkt.
4. De matrijsOnze extrusiematrijzen worden met de grootste zorg vervaardigd, meestal d.m.v. vonk-erosie. De ontwikkeling ervan valt en staat volledig met de vorm van het te vervaardigen profiel. D.m.v. speciale software wordt de juiste geometrie berekend. Kleine aanpassingen zijn onder voorbehoud mogelijk, dit door de parameters van de extrusie aan te passen of de matrijs een weinig bij te werken. Grote wijzigingen zijn veelal onmogelijk daar de vloei van het rubbermateriaal volledig zal veranderen. Een nieuwe matrijs is dan de enigste oplossing.Verschillende rubberkwaliteiten en/of hardheden door eenzelfde matrijs extruderen is veel-al onmogelijk. Voor silicone en TPeRX materialen is er meer mogelijk. Het al dan niet mo-gelijk zijn hangt af van krimp na afkoeling. Zo is de krimpcoëfficiënt van Viton® en Nitrile niet dezelfde. Zodoende kunnen bij precisie-onderdelen tolerantieproblemen optreden bij veranderen van kwaliteit.
Algemeen: Productie van rubber
Rubberprofielen - Uitgave 2010
6
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
Toleranties Zeer belangrijk en toch weinig bekend zijn de toleranties die mogelijk zijn op het geëxtru-deerde profiel. Ontwerpers en eindgebruikers leggen vaak toleranties voor die in machine-bouw en metaaldelen worden gebruikt. Bij het produceren van profielen uit elastomeren is een zeer enge maatvoering meestal niet mogelijk. De norm die voor rubber profielen geldt is ISO3302-1 (1996), vroeger DIN 7715-2 en-3. Indien vooraf geen afspraken zijn overeengekomen, wordt klasse E2 meestal als standaard genomen.
Men maakt onderscheid in 3 klassen :Klasse E1: zeer hoge nauwkeurigheidsgraad.Klasse E2: hoge nauwkeurigheidsgraad.Klasse E3: gemiddelde nauwkeurigheidsgraad.
Voor pvc klemprofielen:
Toleranties:Zacht rubber : ISO 3302 - 1, E2 Sponsrubber : ISO 3302 - 1, E3PVC : DIN 16941
Protectors • Tolerances DIN 16941
Afmeting -1,2 mm 1,2 à 2,5 mm 2,5 à 4 mm 4 à 6,5 mm 6,5 à 10 mm + 10 mm Tol. +/-0,3 mm +/-0,4 mm +/-0,5 mm +/-0,6 mm +/-0,8 mm +/-1,0 mm
ISO 3302-1
diam. mm E1 +/-mm E2 +/-mm E3 +/-mm 0 à 1.5 0.15 0.25 0.40 1.5 à 2.5 0.20 0.35 0.50 2.5 à 4.0 0.25 0.40 0.70 4.0 à 6.3 0.35 0.50 0.80 6.3 à 10 0.40 0.70 1.00 10 à 16 0.50 0.80 1.30 16 à 25 0.70 1.00 1.60 25 à 40 0.80 1.30 2.00 40 à 63 1.00 1.60 2.50 63 à 100 1.30 2.00 3.20
E2 is standaard voor onze profielen
Algemeen: Toleranties
Rubberprofielen - Uitgave 2010
7
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
Tabel met mechanische en chemische eigenschappen
Elastomeren en hun eigenschappen
Chemische Natuur Styreen Nitril Chloropreen Ethyleen Fluor Silikon Poly Vinyl nomenclatuur Rubber Butadien Rubber Rubber Propyleen Rubber Chloride Buna N Afkorting ASTM D 1418 NR SBR NBR CR* EPDM FPM** MVQ PVC-softShore A Hardness Range (±5) 40-90 45-90 45-90 40-90 40-90 45-90 30-80 55-95Treksterkte 4-15 4-15 4-14 5-15 6-13 8-15 4-12 0Elasticiteit (20°C) ++ + 0 + + 0 0 Slijtvastheid ++ ++ + + + 0 0 0A Chemische Resistentie + + + + ++ +++ + ++A Olie Resistentie - - ++ + - ++ + +A Petrol Resistentie - - + - - ++ - +A Solvent Resistentie - - + + 0 0 + 0A Temp. Stabiliteit in °C -40/+80 -30/+80 -30/+100 -30/+90 -50/+130 -20/+130 -50/+200 -30/+70Ozon Resistentie 0 0 0 ++ +++ ++ ++ 0Algemene Klimaat Resistentie 0 + + ++ ++ ++ ++ +Gas Ondoordringbaarheid 0 0 + + 0 + - B Resistentie tegen ++ + + + + + 0 0 permanente vervormingAdhesie met metaal ++ ++ 0 + 0 0 0 Dielectrische eigenschappen ++ + + 0 ++ + + 0 A = Afhankelijk van gebruikt mediumB = Bij relatieve hoge temperaturen, daalt de resistentie meestalC = Afhankelijk van welke mix men gebruikt heeft, maar vallen binnen deze grenswaarden. Als ze meestal gebruikt worden dicht bij deze grenswaar-den, kan het voorkomen dat de fysische eigenschappen veranderen. Daarom is het aangeraden om speciale elastomeren te gebruiken.
++ = uitstekend tot zeer goed+ = goed0 = bevredigend- = laag tot slecht
Naast deze opgegeven materialen zijn er nog andere beschikbaar voor extrusie waaronder HNBR en vele TPeRX soorten. Hiervoor verwijzen we naar het hoofdstuk TPeRX en onze website. www.rubbertechnology.info
Algemeen: Rubberkwaliteiten
*CR: ook gekend als Neoprene™**FPM: ook gekend als Viton®
Rubberprofielen - Uitgave 2010
8
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
Datasheets Op aanvraag verzorgen wij voor u een datasheet van het gebruikte com pound. Voor de materialen van onze standaardsnoeren, rechthoekige profielen en van de silicone profielen zijn standaard-datasheets aanwezig. Hieronder tonen wij u een voorbeeld.
Algemeen: Datasheets
3
r u b b e r te c h n o l o g y
r u b b e r pr o f i l
e s
01.03.2009
This information is, to the best of our knowledge, accurate and reliable to the date indicated. The above mentioned data
have been obtained by tests we consider as reliable. We don’t a
ssure that the same results can be obtained in other
laboratories, using different conditions by the preparation and evaluation of the samples.
nbr 70-c
ompound 366301 -
technical Data
sheet
1. Introduction
The ERIKS NBR 70 366301 compound is a medium Nitrile compound for in
dustrial
use. It is the standard profile compound.
3. Physical Properties
Test Method
Norm
Test Values
Hardness
ISO 48 Method M 70° ± 5° IR
HD
Specific Weight
ISO 2781
1.27
Tensile Strength at break
ISO 37
11 MPa
Elongation at break
ISO 37
250%
Compression Set
ISO 815
22h/100°C, on cord 3,53 m
35% max
Heat Ageing, 70h/100°C
ISO 188
Hardness Change
+7°
Volume Change
-2,6%
Immersion in ASTM oil n°3, 70h/100°C ISO 1817
Hardness Change
+3°
Volume Change
-3%
Weight Change
-2,6%
Immersion in FAM B, 24h/23°C
ISO 1817
with drying during 24h at 100°C
Hardness Change
+7°
Volume Change
-16,5%
Weight Change
-13,1%
4. Temperature Resistance
• -30°to
+115°C
• TR10(lowtemp):-22°C
5. Chemical Resistance
Alkali
:verygood
Air
:excellent
Alcohol
:verygood
Fats
:excellent
Mineraloils
:excellent
Siliconeoils
:excellent
Vegetableoils
:excellent
Inorganicacids:
excellent
Ketones
:unsatisfactory
Ethers
:unsatisfactory
Organicacids
:fair
Inorganicacids:
excellent
6. Advantages
• TolerancestoISO3302-1E2.
7. Other Information
• AlsoaskforourFDAcompliancycompounds.
2. Product Description
ChemicalComposition:
Physicalform
:
Colour
:
Storagestability*
:
Acrylonitrile / B
utadiene Rubber
Cords / Extrusions
Black
± 7 years
* :FollowingISO2230conditions
5
r u b b e r t e c h n o l o g y
r u b b e r p r o f i l e s
01.05.2008
This information is, to the best of our knowledge, accurate and reliable to the date indicated. The above mentioned data
have been obtained by tests we consider as reliable. We don’t assure that the same results can be obtained in other
laboratories, using different conditions by the preparation and evaluation of the samples.
epDM 70-compound 559301 - technical Data sheet
1. Introduction
EPDM 70-compound 559301 is made of Ethylene-Propylene, standard profile quality.
3. Physical Properties
2. Product Description
Chemical Composition :
Physical form :
Colour :
Storage stability * :
Ethylene / Propylene / Diene Terpolymer
Cord / Profiles
Black
± 10 years
Test Method
Norm Test Values
Hardness
ISO 48 Method M 70° ± 5° IRHD
Tensile Strength at break ISO 37
12 MPa
Elongation at break
ISO 37 250%
Specific Weight
ISO 2781 1,180
Compression Set
ISO 815
22h/100°C, on slab
18% max
4. Temperature Resistance
• -35°to+120°C
• insteamupto140°C
5. Chemical Resistance
Air
: excellent
Alcohol : excellent
Alkali : excellent
Fats : unsatisfactory
Hydrocarbons : unsatisfactory
Ethers : excellent
Esters : unsatisfactory
Acids : fair
Oils : unsatisfactory
Water : excellent
Steam : good
6. Advantages
• Verygoodozoneandweathering
resistance, as well as the resistance
to acids and hydroxides with low con-
centration.
7. Other Information
• Nottobeusedinmineraloils.
• Canbeproducedinothercoloursand
in FDA-compound.
• Tolerancesonthisprofilearein
compliance with ISO 3302-1E2.
* : Following ISO 2230 conditions
28
r u b b e r t e c h n o l o g y
r u b b e r p r o f i l e s
01.03.2009
This information is, to the best of our knowledge, accurate and reliable to the date indicated. The above mentioned data have been obtained by tests we consider as reliable. We don’t assure that the same results can be obtained in other laboratories, using different conditions by the preparation and evaluation of the samples.
tpe rX® p342 - technical Data sheet
1. IntroductionTPe RX® P342 is a SEBS thermoplastic elastomer recycable, alternative to EPDM rubber compounds.
3. Physical Properties
Chemical Composition :Physical form :Color :Specific Weight :Storage stability * :
SEBS (Styrene-ethylene-Butadiene-Styrene)Cord / ExtrusionsLight cream1,1Excellent
Test Method Norm Test ValuesHardness ISO 868 80° Shore ATensile Strength at break ISO 527 5,0 MpaElongation at break ISO 527 150 %Compression Set ISO 815 72h/23°C 24 % 24h/70°C 51 % 22h/100°C 80 %
4. Temperature Resistance• -35°to+90°C
5. Advantages• AlternativetoEPDMorotherrubber
compounds• Recycable• Availableinmanycolours• Canbewelded• Canbeglued(cyanoacrylate)• Canbeproducedinsmallquantities• TolerancesISO3302-E2• Canbeadhesivebacked
6. Applications• Excellentforfoodandpharmaceutical
industry• FDA177.2600andBGVVcompliant• Certificateondemand
7. Other Information•ThiscompoundisADI(AnimalDerived
IngredientFree).
2. Product Description
* :FollowingISO2230conditions
7
r u b b e r t e c h n o l o g yr u b b e r p r o f i l e s
01.03.2009
This information is, to the best of our knowledge, accurate and reliable to the date indicated. The above mentioned data
have been obtained by tests we consider as reliable. We don’t assure that the same results can be obtained in other
laboratories, using different conditions by the preparation and evaluation of the samples.
VMQ silicone profile st-ec-60-001 - technical Data sheet
1. IntroductionSilicone compound ST-EC-60-001 is in compliance with FDA 177.2600, USP VI and
Bfr BGVV for food, pharma and medical applications. Peroxide cured. Standard
profile technical quality compound.2. Product Description
3. Physical Properties
Chemical Composition :Physical form :Colour :Odour :Storage stability * :
Vinyl Methyl Silicone RubberMouldings / ExtrusionsTranslucentNone
± 10 years
Test Method
Norm Test Values
Hardness
ISO 48 Method M 60° ± 5° IRHD
Tensile Strength at break ISO 37
min 10 MPa
Elongation at break
ISO 37
min 450%
Specific Weight
ISO 2781 1,17
Compression Set
ISO 815
25% compression - 22h/175°C
on O-Ring (3,53 mm)
25% 4. Temperature Resistance• -60°to+200°C
5. Chemical ResistanceSIP : very good
CIP : badHeat Ageing : excellent
Sterilisation : excellent
6. Advantages• Lowcompressionset• Stockiteminstandardcorddimension
• USPClassVI,FDA177.2600BGVV-conform
• MigrationtestedincompliancewithFDA 177.2600 class 1 (certificate on request)
7. Other Information• Tolerancesincompliancewith ISO 3302-1E2 • Othercoloursondemand
•ThiscompoundisADI(AnimalDerived
Ingredient Free).
* : Following ISO 2230 conditions
Bezoek onze technische website!www.rubbertechnology.info
Rubberprofielen - Uitgave 2010
9
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
De ERIKS profielprijscalculator is een vande vele on-line instrumenten die op de ERIKS technische websites www.eriks.info te vinden zijn.
Surf naar www.rubbertechnology.info en zoek op ‘interactive tools’ de ‘rubbercalculator’.Teken zelf uw profiel en beheer zelf de prijs!
Algemeen: Profielprijscalculator
Extra hulpmiddelen op onze technische website!
www.eriks.info
InTeRAcTIeve klAnToPlossIngen:ERIKS biedt diverse interactieve on-line oplossingen voor zijn diverse dichtingsproducten. Deze programma’s zijn kostenloos op onze technische website te consulteren.
Rubberprofielen - Uitgave 2010
10
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
1. a. Rondsnoer
Volrubber
NBR 70 NBR 90 EPDM 70 VMQ 60 VMQ 60 VMQ 60 FPM** 70 FPM** 75 CR* 60 PUR NR 366301 559301 714217 Silicone 514308 329301 40 714 THT 714 MP D E1 E2 E2 FDA/BFR/USP FDA/BFR/USP E1 E1 E2 E2 E2 zwart zwart zwart E1 E1 E1 zwart zwart wit groen bruin transp grijs rood 1,60 Art.n° 10000506 10000437 10000459 L.max. 200m 150m 200m 1,78 Art.n° 10000507 10000438 10000460 L.max. 200m 150m 200m 2,00 Art.n° 10000508 10000439 10000485 10000461 L.max. 200m 150m 200m 200m 2,40 Art.n° 10000509 1000462 L.max. 200m 200m 2,50 Art.n° 10000510 10000560 L.max. 200m 600m 2,62 Art.n° 10000511 1000440 10000486 10000463 L.max. 200m 150m 200m 200m 3,00 Art.n° 10000512 10000543 10000441 10000487 10000566 10000464 11038449 10000417 10000587 10000575 L.max. 200m 200m 150m 200m 25m 100m 100m 250m 50m 50m3,25 Art.n° 10000513 L.max. 200m 3,53 Art.n° 10000514 10000544 10000442 10000488 1000465 11038460 10000418 L.max. 200m 80m 150m 200m 100m 100m 250m 4,00 Art.n° 10000443 10000489 10000567 10000552 10000466 11038461 10000419 10000588 10000576 L.max. 100m 200m 25m 200m 100m 100m 200m 50m 50m4,50 Art.n° 1000550 L.max. 100m 4,75 Art.n° 10000467 L.max. 100m 5,00 Art.n° 10000517 10000545 10000444 10000490 10000568 28000468 11038462 10000420 10000589 10000577 L.max. 200m 100m 90m 200m 25m 50m 50m 150m 50m 50m5,33 Art.n° 10000518 10000445 37000469 11038463 L.max. 100m 90m 50m 50m 5,70 Art.n° 10000520 10000446 10000491 46000470 11038464 L.max. 100m 100m 200m 50m 50m 6,00 Art.n° 10000521 10000546 10000447 10000493 10000492 55000471 11038465 10000421 10000590 10000578 L.max. 100m 80m 100m 100m 25m 50m 50m 100m 50m 50m6,35 Art.n° 10000522 64000472 L.max. 100m 50m 6,50 Art.n° 10000551 L.max. 50m7,00 Art.n° 10000523 10000448 10000494 10000569 10000553 73000473 11038466 10000422 10000591 10000579 L.max. 100m 70m 100m 15 100m 50m 50m 100m 50m 50m7,50 Art.n° 10000524 L.max. 100m 8,00 Art.n° 10000525 10000547 10000449 10000496 10000570 10000495 10000474 11038468 10000423 10000592 10000580 L.max. 100m 50m 60m 100m 15m 25m 50m 50m 60m 50m 50m8,40 Art.n° 10000526 10000450 10000475 L.max. 50m 60m 50m
Deel 1: volrubber
Rubberprofielen - Uitgave 2010
11
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
1. a. Rondsnoer
Volrubber
NBR 70 NBR 90 EPDM 70 VMQ 60 VMQ 60 VMQ 60 FPM** 70 FPM** 75 CR* 60 PUR NR 366301 559301 714217 Silicone 514308 329301 40 714 THT 714 MP D E1 E2 E2 FDA/BFR/USP FDA/BFR/USP E1 E1 E2 E2 E2 zwart zwart zwart E1 E1 E1 zwart zwart wit groen bruin transp grijs rood9,00 Art.n° 10000527 10000497 10000476 10000424 10000581 L.max. 50m 50m 50m 50m 50m9,50 Art.n° 10000528 L.max. 50m 10,00 Art.n° 10000529 10000451 1000498 10000571 10000499 10000477 11038469 10000425 10000593 10000582 L.max. 50m 60m 50m 15m 50m 50m 25m 50m 50m 50m11,00 Art.n° 10000530 10000452 10000478 L.max. 50m 50m 25m 12,00 Art.n° 10000531 10000453 10000500 10000572 1000501 10000479 11038470 10000426 10000583 L.max. 25m 40m 50m 15m 30m 25m 25m 30m 20m13,00 Art.n° 10000532 10000561 10000480 10000427 L.max. 25m 50m 25m 50m 14,00 Art.n° 10000533 10000454 10000428 L.max. 25m 35m 50m 14,50 Art.n° 10000554 10000548 L.max. 20m 30m (*) 15,00 Art.n° 10000534 10000455 10000562 10000481 10000429 L.max. 25m 30m 20m 25m 50m 16,00 Art.n° 10000535 10000456 10000502 10000482 10000430 L.max. 25m 30m 25m 25m 30m 17,00 Art.n° 10000556 L.max. 20m 18,00 Art.n° 10000536 10000503 10000431 10000584 L.max. 25m 25m 30m 20m20,00 Art.n° 10000537 10000457 10000563 10000483 10000432 10000585 L.max. 25m (*) 25m 25 25m 20m 20m22,00 Art.n° 10000538 10000564 10000573 10000559 L.max. 25m 25m 10m 20m 23,00 Art.n° 10000574 10000557 L.max. 10m 20m 25,00 Art.n° 10000539 10000558 10000433 10000586 L.max. 25m 20m 20m 20m30,00 Art.n° 10000540 10000458 10000434 L.max. 25m (**) 15m 20m 31,00 Art.n° 10000565 L.max. 20m 32,00 Art.n° 10000541 L.max. 25m 40,00 Art.n° 10000542 L.max. 10m
(*) = 10000504 in 50 sh(**) = 10000505 in 50 sh
Deel 1: volrubber
*CR: ook gekend als Neoprene™**FPM: ook gekend als Viton®
Rubberprofielen - Uitgave 2010
12
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
1. b. Vierkant profiel
Volrubber
mm EPDM 70 VMQ 60 CR* 60 559301 714217 329301 zwart Silicone 714 BF wit FDA/BFR transp E2 E2 E2 5x5 Art.n° 10000413 L.max. 75m 6x6 Art.n° 1000175 L.max. 100m 8x8 Art.n° 10000415 L.max. 75m 8,5x8,5 Art.n° 10000176 L.max. 50m 9x9 Art.n° 10000297 L.max. 50m 10x10 Art.n° 10000261 1000406 10000157 L.max. 50m 50m 40m 12x12 Art.n° 10000263 10000159 L.max. 40m 25m 13x13 Art.n° 10000264 10000160 L.max. 40m 30m 14x14 Art.n° 10000265 10000161 L.max. 40m 50m 15x15 Art.n° 10000267 10000163 L.max. 25m 25m 16x16 Art.n° 11049014 1000409 10000165 L.max. 25m 25m 30m 20x20 Art.n° 10000272 10000168 L.max. 25m 20m 22x22 Art.n° L.max. 25x25 Art.n° 1000172 L.max. 30m 30x30 Art.n° 10000173 L.max. 20m
Deel 1: volrubber
*CR: ook gekend als Neoprene™
Rubberprofielen - Uitgave 2010
13
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
1. c. Rechthoekig profiel
Volrubber
b x d EPDM 70 VMQ 60 FPM** 70 CR* 60 559301 714217 514308 329301 zwart Silicone zwart wit FDA/BFR transp E2 E2 E2 E2 6x4 Art.n° 10000414 L.max. 25m 8x6 Art.n° L.max. 10x3 Art.n° L.max. 10x5 Art.n° L.max. 10x6 Art.n° 10000262 10000158 L.max. 50m 50m10x8 Art.n° L.max. 12x8 Art.n° L.max. 14x8 Art.n° 10000407 L.max. 25m 15x5 Art.n° 10000164 L.max. 100m15x10 Art.n° 10000266 10000162 L.max. 50m 30m15,5x10 Art.n° 10000408 10000308 L.max. 50m 25m 16x8 Art.n° L.max. 16x10 Art.n° L.max. 16x12 Art.n° L.max. 20x5 Art.n° L.max. 20x10 Art.n° 10000270 10000411 10000166 L.max. 25m 25m 30m20x15 Art.n° 10000271 10000167 L.max. 25m 30m20x16 Art.n° L.max. 25x3 Art.n° L.max.
Volrubber
b x d CR* 60
wit
E2
25x5 Art.n° L.max.25x6 Art.n° L.max.25x8 Art.n° L.max.25x10 Art.n° 10000169 L.max. 30m25x12 Art.n° L.max. 25x15 Art.n° 10000170 L.max. 25m25x20 Art.n° 10000171 L.max. 20m30x5 Art.n° L.max. 30x10 Art.n° L.max.30x12 Art.n° L.max.30x15 Art.n° L.max.30x16 Art.n° L.max. 30x20 Art.n° L.max.40x8 Art.n° L.max.40x10 Art.n° L.max. 45x10 Art.n° L.max. 50x25 Art.n° L.max. 40x15 Art.n° 10000174 L.max.
Deel 1: volrubber
*CR: ook gekend als Neoprene™ **FPM: ook gekend als Viton®
Rubberprofielen - Uitgave 2010
14
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
2. P-profiel / muzieknoot
Kraal / muzieknootprofielen (ook wel p-profielen genaamd) hebben een veelzijdig toepassingsgebied. Zij kunnen dienen als bescherming of als afdichting in deu-ren of deksels waarbij slechts een geringe sluitkracht wordt vereist. De profielen zijn leverbaar in diverse uitvoeringen zoals met ronde, halfronde, rechthoekige, open en/of gesloten kraal.
Volrubber
ERIKS Profielnr. Materiaal Hardheid A B C D Kleur L. Max. Artikelnr. Shore A (m)10000144 2683 CR* 55 10 4 2 1 zwart 2010000185 2645 EPDM 55 15 6 3,6 1,3 grijs 10010000145 2690 CR* 55 20 6 3,6 1,5 zwart 4010000236 2708 EPDM 65 20 8 6 1 zwart 10010000238 2722 EPDM 65 16 8 4 2 zwart 2010000241 2777 EPDM 65 20 8 1,5 zwart 5010000239 2739 EPDM 65 29 9 6 1,5 zwart 5010000335 2746 EPDM 65 30 11 5 4,5 zwart 5010000237 2715 EPDM 65 30 12 8 2,5 zwart 1010000240 2753 EPDM 65 30 13 9 2 zwart 10
C
A
B
D
Deel 1: volrubber
*CR: ook gekend als Neoprene™
Rubberprofielen - Uitgave 2010
15
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
2. P-profiel / muzieknoot
2
10
4
1
Art. n°: 10000144 L. max.: 20NR 2683 CR* 55 zwart
3,6
20
6 1,5
Art. n°: 10000145 L. max.: 40NR 2690 CR* 55 zwart
3,6
156 1,
3
Art. n°: 10000185 L. max.: 100NR 2645 EPDM 55 grijs
6
20
8 1
Art. n°: 10000236 L. max.: 100NR 2708 EPDM 65 zwart
4
268 2
Art. n°: 10000238 L. max.: 20NR 2722 EPDM 65 zwart
20
8 1,5
Art. n°: 10000241 L. max.: 50NR 2777 EPDM 65 zwart
8
30
12 2,5
Art. n°: 10000237 L. max.: 10NR 2715 EPDM 65 zwart
Art. n°: 10000239 L. max.: 50NR 2739 EPDM 65 zwart
6
29
9 1,5
5
30
11
4,5
Art. n°: 10000335 L. max.: 10NR 2746 EPDM 65 zwart
Art. n°: 10000240 L. max.: 10NR 2753 EPDM 65 zwart
Art. n°: 10000333 L. max.: 50NR 2638 NR 65 zwart
Art. n°: 10000334 L. max.: 50NR 2676 NR 55 zwart
9
30
13 2
3
15
7
2
5
20
8 1,5
Deel 1: volrubber
*CR: ook gekend als Neoprene™
Rubberprofielen - Uitgave 2010
16
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
A
C
B
Volrubber
ERIKS Art.nr. Profiel Materiaal Hardheid A B C Kleur L. Max. Shore A (m)10000146 2900 CR* 55 19,5 2 4,5 Zwart 10010000181 2878 CR* 65 28 1,5 6 Zwart 50
19,5
4,3 2
Art. n°: 10000146 L. max.: 100NR 2900 CR* 55 zwart
28
6 1,5
Art. n°: 10000181 L. max.: 50NR 2878 CR* 65 zwart
2. P-profiel / muzieknoot
Deel 1: volrubber
*CR: ook gekend als Neoprene™
Rubberprofielen - Uitgave 2010
17
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
Volrubber
ERIKS Profiel Materiaal Hardheid A B C D Kleur L. Max. Art.nr. Shore A (m)10000230 2397 EPDM 65 3 5,5 1 0 zwart 10010000231 2405 EPDM 65 3,5 6 1 0 zwart 8010000296 7057 EPDM 70 7 10 1,5 2 zwart 5010000141 2412 CR* 55 4 5 2 1 zwart 10010000218 2210 EPDM 65 6 10 3 1,5 zwart 5010000219 2234 EPDM 65 8 12 4 2 zwart 4510000226 2335 EPDM 65 9 20 4,5 2,25 zwart 2510000220 2258 EPDM 65 8 15 5 1,5 zwart 3010000183 2227 CR* 65 8 10 6 1 zwart 5010000222 2289 EPDM 65 9 18 6 1,5 zwart 2510000224 2304 EPDM 65 10 18 6 2 zwart 5010000227 2359 EPDM 65 18 28 6 6 zwart 2510000221 2265 EPDM 65 12 15 7 2,5 zwart 5010000223 2296 EPDM 65 12 21 8 2 zwart 2510000225 2311 EPDM 65 15 15 10 2,5 zwart 3510000178 2328 CR* 65 18 20 12 3 zwart 5010000228 2366 EPDM 60 24 22 16 4 zwart 510000229 2373 EPDM 60 30 25 22 4 zwart 5
C
A
B
D
3
5,5
1
1,5
3,5
6
1
2
Art. n°: 10000230 L. max.: 100NR 2397 EPDM 65 zwart
Art. n°: 10000231 L. max.: 80NR 2405 EPDM 65 zwart
3. U-profiel
U-profielen worden veelal toegepast als bescherming van randen of voor het monteren van platen, bijvoorbeeld glas in metalen profielen. In sommige gevallen kunnen de pro-fielen ook worden toegepast voor het afdichten van kleine spleten. Ze zijn in diverse maatvoeringen met ronde bodem of met rechte bodem leverbaar.
Rechte bodem
Deel 1: volrubber
*CR: ook gekend als Neoprene™
Rubberprofielen - Uitgave 2010
18
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
6
9
18
1,5
Art. n°: 10000222 L. max.: 50NR 2289 EPDM 65 zwart
Art. n°: 10000218 L. max.: 50NR 2210 EPDM 65 zwart
Art. n°: 10000219 L. max.: 45NR 2234 TPE 65 zwart
Art. n°: 10000220 L. max.: 30NR 2258 EPDM 65 zwart
2
4
5
1
1
6
8
10
1
Art. n°: 10000141 L. max.: 100NR 2412 CR* 55 zwart
Art. n°: 10000183 L. max.: 50NR 2227 CR* 70 zwart
3
6
10
1,5
4
8
12
25
815
1,5
Art. n°: 10000296 L. max.: 50NR 7057 EPDM 70 zwart
7
10
5
1,5
5
3
4,5
9
20
2,25
Art. n°: 10000226 L. max.: 25NR 2335 EPDM 65 zwart
Art. n°: 10000224 L. max.: 50NR 2304 EPDM 65 zwart
6
10
18
2
3. U-profiel
Rechte bodem
Deel 1: volrubber
*CR: ook gekend als Neoprene™
Rubberprofielen - Uitgave 2010
19
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
6
18
2818
10
6 6
Art. n°: 10000227 L. max.: 25NR 2359 EPDM 65 zwart
7
1215
2,5
Art. n°: 10000221 L. max.: 50NR 2265 EPDM 65 zwart
10
15
15
2,5
Art. n°: 10000225 L. max.: 35NR 2311 EPDM 65 zwart
12
18
20
3
Art. n°: 10000178 L. max.: 50NR 2328 CR* 65 zwart
Art. n°: 10000223 L. max.: 25NR 2296 EPDM 65 zwart
8
12
21
2
16
24
22
4
175
Art. n°: 10000228 L. max.: 5NR 2366 EPDM 65 zwart
Art. n°: 10000229 L. max.: 5NR 2373 EPDM 65 zwart
22
30
25
4
214
3. U-profiel
Rechte bodem
Deel 1: volrubber
*CR: ook gekend als Neoprene™
Rubberprofielen - Uitgave 2010
20
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
C
A
B
D
Volrubber
ERIKS Profiel Materiaal Hardheid A B C D Kleur L. Max. Art.nr. Shore A (m)10000179 2450 CR* 65 5 3 1 - zwart 9010000205 2056 EPDM 65 3 10 1 1 zwart 8010000206 2063 EPDM 65 5 10 1 2 zwart 5010000208 2087 EPDM 65 5 15 1,5 1,75 zwart 3010000232 2429 EPDM 65 9 5 1,5 - zwart 5010000142 2467 CR* 55 13,5 10,8 2 - zwart 5010000207 2070 EPDM 65 6 12 2 2 zwart 4010000217 2188 EPDM 65 6 25 2 2 zwart 5010000209 2094 EPDM 70 7 15 3 2 zwart 3010000211 2133 EPDM 65 6 19 3 1,5 zwart 5010000216 2164 EPDM 65 7 22 3 2 zwart 5010000233 2443 EPDM 65 13 6,5 3 - zwart 4010000213 2195 EPDM 65 10 25 5 2,5 zwart 5010000215 2157 EPDM 65 10,5 20 6 2,25 zwart 2510000330 2436 EPDM 65 10 6 6 2,0 zwart 25
1
5
3
Art. n°: 10000179 NR 2450 CR* 65 zwart
Art. n°: 10000205 L. max.: 80NR 2056 EPDM 65 zwart
1
5
10
2
Art. n°: 10000206 L. max.: 50NR 2063 EPDM 65 zwart
1
3
10
1
Art. n°: 10000208 L. max.: 30NR 2087 EPDM 65 zwart
1,5
5
15
1,75 1,5
9
5
Art. n°: 10000232 L. max.: 50NR 2429 EPDM 65 zwart
2
13,5
6
10,8
Art. n°: 10000142 L. max.: 50NR 2467 CR* 55 zwart
3. U-profiel
Ronde bodem
Deel 1: volrubber
*CR: ook gekend als Neoprene™
Rubberprofielen - Uitgave 2010
21
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
2
625
2
Art. n°: 10000217 L. max.: 50NR 2188 EPDM 65 zwart
Art. n°: 10000207 L. max.: 40NR 2070 EPDM 65 zwart
2
6
12
2
Art. n°: 10000216 L. max.: 50NR 2164 EPDM 65 zwart
3
7
22
23
6
19
1,5
Art. n°: 10000211 L. max.: 50NR 2133 EPDM 65 zwart
3
7
15
2
Art. n°: 10000209 L. max.: 30NR 2094 EPDM 70 zwart
3
13
6,5
Art. n°: 10000233 L. max.: 40NR 2443 EPDM 65 zwart
5
10
25
2,5
Art. n°: 10000213 L. max.: 50NR 2195 EPDM 65 zwart
6
10
6
Art. n°: 10000330 L. max.: 25NR 2436 EPDM 65 zwart
6
10,5
20
2,25
Art. n°: 10000215 L. max.: 25NR 2157 EPDM 65 zwart
3. U-profiel
Ronde bodem
Deel 1: volrubber
Rubberprofielen - Uitgave 2010
22
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
4. L-profiel
Volrubber
ERIKS Profiel- Materiaal Hardheid A B C D Kleur L. Max. Artikelnr. nr. Shore A (m)10000246 2955 EPDM 65 20 2,5 2,5 17 zwart 2510000247 2962 EPDM 65 25 3 3 20 zwart 5010000182 2986 CR* 60 40 8 8 40 zwart 25
Art. n°: 10000182 L. max.: 25 mNR 2986 CR* 65 zwart
Art. n°: 10000246 L. max.: 25 mNR 2955 EPDM 65 zwart
Art. n°: 10000247 L. max.: 50 mNR 2962 EPDM 65 zwart
25
20
3
3
40
40
820
17
2,5
2,5
Deel 1: volrubber
*CR: ook gekend als Neoprene™
Rubberprofielen - Uitgave 2010
23
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
Volrubber
ERIKS Profiel- Materiaal Hardheid A B C D Kleur L. Max. Artikelnr. nr. Shore A (m)10000259 8067 EPDM 65 15 2 2 10 zwart 5010000244 2931 EPDM 65 25 3 3 25 zwart 50
5. T-profiel 10
2
15
2
Art. n°: 10000259 L. max.: 50 mNR 8067 EPDM 65 zwart
25
3
25
Art. n°: 10000244 L. max.: 50 mNR 2931 EPDM 65 zwart
Deel 1: volrubber
Rubberprofielen - Uitgave 2010
24
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
6. Weegbrugprofiel
Art. n°: 11072609L. max.: 4 mNR 1619/44/97 70 EPDM
60
10
6
80
70
150
10
8
70
150
10
10
Art. n°: 11072605L. max.: 4 mNR 1910/44/99 70 SBR
Art. n°: 11072502L. max.: 4 mNR 1119/44/95 70 EPDM
Deel 1: volrubber
Volrubber
ERIKS Profiel- Materiaal Hardheid A B C D Kleur L. Max. Artikelnr. nr. Shore A (m)11072605 1910/44/99 NR 70 80 6 10 60 zwart 411072502 1119/44/95 NR 70 150 10 10 70 zwart 411072609 1619/44/97 NR 70 150 8 10 70 zwart 4
Rubberprofielen - Uitgave 2010
25
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
7. Glasdragerprofiel Volrubber glasdrager-profielen hebben als doel het klemmen van elementen en plaatconstructies. Het kunnen glazen of kunststof panelen zijn maar ook verbindingen tussen diverse platen. Het materiaal van deze profielen is nagenoeg altijd EPDM, hard-
heid 70°, en dit o.w.v. de goede ozon- en veroude-ringsbestendigheid ervan. Veel van onze profielen hebben door het vulcanisatieproces reeds een voorbuiging, deze ligt meestal met de smalle ope-ning aan de buitenkant.
Deel 1: volrubber
Volrubber
ERIKS Profielnr. A B C D E F Buigradius Rollengte Vuller Artikelnr. (mm) 11588899 7004 3 1 4 11.6 4.5 6 35 20 211417055 7005 3 2 4 10.2 3 3 20 50 111828192 7006 4 1.5 4 13.6 5 6 35 25 211828243 7007 4 1.5 7 16 7 7 80 20 311395339 7008 4 2 7.3 18 11 8.7 100 15 311469346 7009 4 3 4 12.6 5 6 35 25 211652709 7010 4 7 7 16 7 7 80 20 311828244 7011 4.5 5 7 16 7 7 80 20 311456906 7012 5 2 5 15 6 6 100 50 311828245 7013 5 2 7.5 19 12.5 9.5 100 15 311828246 7014 5 3 7 19 8 8 90 20 311828247 7015 5 3 7.5 19 12.5 9.5 100 15 310000285 7016 5 5 7 18.4 9 8 90 20 311828248 7017 5.5 2 7.3 19 11 8.7 100 15 3 11828249 7018 6 1.5 7.5 19 12.5 9.5 100 15 311828250 7019 6 2.5 7 19 8 8 90 20 3 11828251 7020 6 4 8.5 19 9.5 9 100 15 311828252 7027 6 6 8,5 19 9,5 9 100 15 3 11287411 7021 7 3 7 20. 12 8.5 100 50 311828273 7022 8 3 7.5 22 12.5 9.5 120 15 311268770 7023 8 4 8.5 25 12.5 10 100 15 3 11828274 7024 10 6 7.5 24 12.5 9.5 100 15 311287409 7025 14 4 11 29 11 12 100 14.5 3
A
D
B
FC
E
7
4 6
5,5
4,5
9,5
7,5
Art. n°: 10000298 L. max.: 100 mNR 3732 EPDM 80 zwart
Art. n°: 10000299 L. max.: 200 mNR 3749 EPDM 80 zwart
Art. n°: 11922563 L. max.: 100 mNR 7030 EPDM 80 zwart
7. Glasdragerprofiel Vuller / montageset
Rubberprofielen - Uitgave 2010
26
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
Montageset profielen:art. 10020354
Montagerichtlijnen voor rubberprofielen Met klemprofielen kan men snel en gemakkelijk beglazingen aanbrengen, en wel zonder stopverf. Bovendien bieden zij nog het voordeel om zonder bijkomende maatregelen andere dunne materialen, als blik-, kunststof- of triplexplaten te monteren; terwijl glasbreuk gemakkelijk en snel op dezlfde wijze kan worden hersteld.
Berekening voor glasafmetingen: van breedte en lengte van de te beglazen opening worde de dubbele glasdikte + 2 mm afgetrokken.Berekening van de profiellengte: de profiellengte is zo mogelijk te bepalen door deze op de opening te leggen: bij deze lengte 1 tot 2% toevoegen om een voorspanning op de voegplaats te verkrijgen.
Bijkomende montagevoorschriften: eerst de functioneel meest gunstige voegplaats bepalen. Het profiel met gesloten sleuf in de opening plaatsen (fig. 1). De glasplaat langs beneden aangbrengen en met een gepast werktuig in de andere profielzijden inwerken (fig.2).Wat zeepwater of glycerine in de gleuf vergemakkelijkt de montage aanzienlijk (fig. 3, 4). Rubber niet rekken maar in tegendeel met de duim samendrukken (fig. 5). Rest profielstuk afsnijden en na ontspanning aansluiten (fig. 6).
Deel 1: volrubber
Rubberprofielen - Uitgave 2010
27
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
8. Glaswagenprofiel
9. Steenklemprofiel
Art. n°: 11828275 Rollengte.: 25 mNR 7001 EPDM 70 zwart
Art. n°: 11828277 Rollengte: 12 mNR 7003 EPDM 70 zwart
Art. n°: 11828276 Rollengte: 25 mNR 7002 EPDM 70 zwart
38
9,8
30
11,5 21
38
9
23
10
Deel 1: volrubber
17
56,5
55,5
28
58,5
Rubberprofielen - Uitgave 2010
28
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
A
B
D
C
Volrubber
ERIKS Profiel- Materiaal Hardheid A B C D Kleur L. Max. Artikelnr. nr. Shore A (m)10000365 3686 SBR 65 40 22 20 5 zwart 510000366 3693 SBR 65 60 52 30 11 zwart 510000367 3701 SBR 65 80 70 40 15 zwart 510000368 3718 SBR 65 110 95 55 20 zwart 510000372 3725 SBR 65 150 130 75 27,5 zwart 5
150 x 130
110 x 95
80 x 70
60 x 52
40 x 22
7
6
5
4
3
2
1
0
0 1 2 3 4 5 6 7 8 9 10
Veer
weg
(cm
)
Belasting ton/m
19,5
49,5
27
169
2
4
Art. n°: 10000202 L. max.: 6 mNR 3631 EPDM 65 zwart
Art. n°: 10000203 L. max.: 25 mNR 7628 EPDM 65 wit
19,5
49,5
27
169
2
4
18
70
35
1913
3
4
Art. n°: 10000363 L. max.: 6 mNR 3648 EPDM 65 zwart
10. Stootbufferprofiel
Rubber stootprofielen hebben een tweeledige functie. Enerzijds als bescherming van het object waarop ze zijn gemonteerd, daarnaast vangen ze de stootkrachten op die er op worden uitgeoefend. Voor de D-vormige profielen zijn de kracht-weg diagrammen bekend. Montage van de profielen kan geschieden door middel van metalen strippen of direct met bouten met geborgde moeren.
Deel 1: volrubber
Rubberprofielen - Uitgave 2010
29
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
11. Sluisprofielen Dergelijke profielen zijn meestal van een groot volume. Ze worden gebruikt als afdichting van sluisdeuren. Meest voorkomende materialen zijn EPDM en NR/SBR. Deze laatste kunnen we leveren volgens een Duitse Waterbaunorm.Deze profielen zijn niet op voorraad. Productie gebeurt op aanvraag.
12. Luikprofiel • afname per volle rol
Volrubber, EPDM, 45° Shore
ERIKS A B C Rollengte Kleur Artikelnr.11354196 27 36 15 20 zwart11365542 30 30 14 15 zwart11381127 35 15 6 25 zwart11394014 25 25 10 20 zwart11404143 40 20 8 20 zwart11487013 35 20 8 20 zwart11738436 25 15 6 40 zwart11738437 30 20 8 20 zwart11738438 30 25 10 20 zwart11738439 35 30 14 15 zwart11738440 35 35 14 15 zwart11738441 40 15 6 20 zwart11738442 40 25 10 15 zwart11738439 40 30 14 15 zwart11738494 40 40 18 15 zwart11738495 45 20 8 15 zwart11738496 50 20 8 15 zwart11738497 50 30 14 15 zwart11738498 50 40 10 10 zwart11738499 50 50 20 10 zwart11738500 60 40 18 10 zwart11738501 70 40 18 5 zwart
C
A
B
Ø 45
R60
R5
120
60 40
165225
Deel 1: volrubber
Rubberprofielen - Uitgave 2010
30
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
10 20
30
30
10,5
20 24,5
37
28
5 29,5
14,5
32
20
11
27
18
3 17
13. Tankdekselprofiel Deze profielen worden meestal tot ring gevulkaniseerd en de ringen worden dan gebruikt als tankdekseldichting. Er is geen voorraad, dus alles wordt op maat geproduceerd. Voor een volledig overzicht van de bestaande matrijzen, verwijzen wij graag naar ons Tankdekseldichting boek. De rubberkwaliteit is meestal een rode, volgens Bfr levensmiddelengeschikte NR/SBR.
Enkele voorbeelden:
Deel 1: volrubber
Honderden matrijzen zijn standaard voorradig voor productie.
Wij vulkaniseren deze ringen op maat.
Rubberprofielen - Uitgave 2010
31
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
14. Voegprofielen
15. H-profielen
25
20
Art. n°: 10000293 L. max.: 50 mNR 4158 EPDM 70 zwart
34
25
Art. n°: 10000294 L. max.: 25 mNR 4165 EPDM 70 zwart
Art. n°: 10000156 L. max.: 100 mNR 9426 CR* 55 zwart
5
14
3
1,52
Art. n°: 10000138 L. max.: 10 mNR 0652 CR* 55 wit
10
19
6
117
1 1
Deel 1: volrubber
*CR: ook gekend als Neoprene™
Rubberprofielen - Uitgave 2010
32
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
12
19,5
10
2
8
12
17
10
2
8
16,8
10
2,8
7,6
2,2
7,8
2,5
2,5
12,3
3,5
6,6
10
15
22,5
6
3
20
6
7
29
3
6
4,5
12
6,5
Art. n°: 10000199 L. max.: 50 mNR 3136 EPDM 50 zwart
Art. n°: 10000191 L. max.: 50 mNR 3143 EPDM 55 zwart
Art. n°: 10000187 L. max.: 50 mNR 3112 EPDM 55 zwart
Art. n°: 10000147 L. max.: 50 mNR 3206 EPDM 55 zwart
Art. n°: 10000193 L. max.: 50 m NR 3213 EPDM 55 zwart
Art. n°: 10000347 L. max.: 25 mNR 3338 TPE 55 zwart
Art. n°: 10000346 L. max.: 50 mNR 3345 TPE 55 tranparant
16. Groefprofielen
Deel 1: volrubber
Rubberprofielen - Uitgave 2010
33
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info12
,5
17
22,
51
18,3
10
15
21
1,5
9
23
23
21
9
15,5
19
7
12
11
1,5
Art. n°: 10000177 L. max.: 25 mNR 3408 CR* 65 grijs
Art. n°: 10000252 L. max.: 40 mNR 3415 EPDM 65 zwart
Art. n°: 10000251 L. max.: 20 mNR 3390 EPDM 65 zwart
Art. n°: 10000137 L. max.: 30 mNR 3376 CR* 45 grijs
Art. n°: 10000325 L. max.: 25 mNR 3383 NR 65 wit
17. E-profielen
Deel 1: volrubber
Art. n°: 10000350 L. max.: 40 mNR 3028 PVC 65 zwart
11
17
*CR: ook gekend als Neoprene™
Rubberprofielen - Uitgave 2010
34
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
15
10
10
6
29,5
19,5
25
4
122,
5
36
4
19
25
4
12
2,5
42
36
12
25
302
4
19
20,5
19
25
12,5
43
12
Art. n°: 10000235 L. max.: 50 mNR 2544 EPDM 65 zwart
Art. n°: 10000197 L. max.: 50 mNR 3491 EPDM 55 zwart voor: Alu NR 3298
Art. n°: 10000153 NR 3530 CR* 55 zwartvoor: Alu NR 3298
Art. n°: 10000253 L. max.: 25 mNR 3516 EPDM 65 zwartvoor: Alu NR 3298
Art. n°: 11828278 L. max.: 30 mNR 7026 EPDM 70 zwart
Art. n°: 11828280 L. max.: 30 mNR 7029 EPDM 70 zwart
Art. n°: 11828281 L. max.: 30 mNR 7028 EPDM 70 zwart
Art. n°: 10000150 L. max.: 25 mNR 3446 CR* 55 zwartvoor: Alu NR 3298
18. Holle profielen
Deel 1: volrubber
24
19.8
28
24
40
19.8
24
19.8
40
Art. n°: 10000049 L. max.: 6,5 mNR 3298 Aluminium grijs10
25
205
*CR: ook gekend als Neoprene™
Rubberprofielen - Uitgave 2010
35
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
19. Klemprofielen
Dit type klemprofiel is een combinatie van een PVC of EPDM-klemprofiel met een sponsrubberprofiel of met een rubberprofiel met afdichtingslip of holle kamer. Binnenin zit een draadband. Deze profielen hebben een dubbele functie. Enerzijds bieden zij de nodige bescherming aan de constructie en anderzijds dienen ze als afdichting. De sponsrubberlippen of de holle kamers zijn heel flexibel en kunnen gebruikt worden voor het afdichten van deuren en kleppen.
Deel 1: volrubber
Rubberprofielen - Uitgave 2010
36
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
19. Klemprofielen
Deel 1: volrubber
PVC/staal klemprofielen
Profiel ERIKS Art.n° Kleur Klembereik (mm) L. max. (m) Buigradius Profielnr. 11922564 zwart 0,8 - 1,5 100 2474 11922565 zwart 1,0 - 2,0 100 2481 11922566 grijs 1,0 - 2,0 100 2481 11922567 zwart 1,0 - 2,0 100 7031 11922568 wit 1,0 - 2,0 100 7031 11922569 zilver 1,0 - 2,0 100 7031
11030401 zwart 1,0 - 4,0 100 2513 10000354 grijs 1,0 - 4,0 100 2513 11115768 zwart 2,0 - 5,0 100 2561
11109475 zwart 6,0 - 8,0 100 2520 10000356 grijs 6,0 - 8,0 100 2520 11149786 zwart 8,0 - 10,0 100 2522
11149609 zwart 1,5 - 2,5 100 2616
11026263 zwart 1,0 - 4,0 100 2565
5,5
8
10
1010
10
100
150
10
1010
10
10
1010
10
14,5
10
14,5
10,5
15
12
40
4020
20
40
4040
40
30
2020
20
17
10,5
4
45
30
15
9
6
9,5
6,5
23,7
8,6
13,1
Rubberprofielen - Uitgave 2010
37
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
80
100 20
20
19. Klemprofielen
Deel 1: volrubber
PVC/staal/EPDM sponsrubber klemprofielen
Profiel ERIKS Art.n° Kleur Klembereik (mm) L. max. (m) Buigradius Profielnr. 11132735 zwart 1,0 - 2,0 100 2569 10000359 zwart 1,0 - 4,0 50 2523 11132926 zwart 1,0 - 4,0 50 2570 11154505 zwart 1,0 - 2,5 50 2573/1 11149567 zwart 2,0 - 4,0 50 2573/2 11154506 zwart 4,0 - 6,0 50 2573/3
11055533 zwart 1,0 - 4,0 50 2571 11132928 zwart 1,0 - 4,0 50 2572
11149568 zwart 1,5 - 305 50 2574
7,4
6,5
15,1
21
10,4
8,5
27,5
12,7
15
33,8
13,2
19,8
20
40 10
10
70
80 15
15
60
80 20
20
24
14
11,5
28
14
15,5
50
150 50
50
50
150 50
50
38,5
24,7
10
9,6
80
150 30
30
Rubberprofielen - Uitgave 2010
38
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
PVC/staal/EPDM sponsrubber klemprofielen
Profiel ERIKS Art.n° Kleur Klembereik (mm) L. max. (m) Buigradius Profielnr. 10000358 zwart 1,0 - 2,0 100 2521
10000360 zwart 1,0 - 4,0 50 2525
11149584 zwart 2,5 - 4,0 50 2584/2 11154508 zwart 4,0 - 6,0 50 2584/3 11149586 zwart 3,0 25 2586 EPDM 50 10000361 zwart 1,0 - 4,0 50 2527 11149587 zwart 1,0 - 2,5 25 2590/1 11154509 zwart 2,5 - 4,0 25 2590/2 11154511 zwart 4,0 - 6,0 25 2590/3
6,5
9,5
8,7
14,5
10
19,4
50
30 120
100
20
15 30
30
19. Klemprofielen
Deel 1: volrubber
16
10,5
37,8
14,5
10
16,1
10,5
22
58
40
40 150
150
60
60 180
180
18,2
11,4
24
60
60 120
120
120
12080
Rubberprofielen - Uitgave 2010
39
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
PVC/staal/EPDM sponsrubber klemprofielen
Profiel ERIKS Art.n° Kleur Klembereik (mm) L. max. (m) Buigradius Profielnr. 11149569 zwart 1,0 - 4,0 100 2576
11149570 zwart 2,0 - 5,0 50 2579
11155747 zwart 2,5 - 4,0 50 2580/2
11149572 zwart 4,0 - 6,0 50 2581
19. Klemprofielen
Deel 1: volrubber
60
40 120
100
14,5
10
14,7 50
40 120
60
14,5
10,521,9
16
10,521,4
15,8
1122,8
80
80 140
140
60
50 120
120
Rubberprofielen - Uitgave 2010
40
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
PVC/staal/EPDM sponsrubber klemprofielen
Profiel ERIKS Art.n° Kleur Klembereik (mm) L. max. (m) Buigradius Profielnr. 11149588 zwart 1,0 - 2,0 50 2592 11149590 zwart 1,0 - 3,0 50 2596 NBR 10063032 zwart 1,0 - 3,0 50 2596
11149591 zwart 2,0 - 4,0 50 2597 11149604 zwart 1,0 - 2,5 100 2602 11922571 zwart 2,0 2 x 50 2606 11149605 zwart 2,0 2 x 50 2606 NBR
11149606 zwart 1,0 - 2,5 100 2607
11149645 zwart 2,0 - 4,0 75 2614/2 11154514 zwart 5,0 - 6,0 75 2614/3
8,4
6,5
15,6
11
10,7
21,5
50
6020
20
13
18
29,5
100
18025
25
50
18030
30
13,1
14,7
22
8
10
9
13
12
9
14,2
9
15
20
5060
20
50
2040
120
80
40180
200
80
60100
120
19. Klemprofielen
Deel 1: volrubber
Rubberprofielen - Uitgave 2010
41
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
PVC/staal/EPDM sponsrubber klemprofielen
Profiel ERIKS Art.n° Kleur Klembereik (mm) L. max. (m) Buigradius Profielnr. 11149589 zwart 1,0 - 3,0 50 2594 11149592 zwart 1,5 - 3,5 50 2599
11149603 zwart 1,0 - 3,5 50 2601
19. Klemprofielen
Deel 1: volrubber
9,3
10,5
21
50
20025
25
9,6
15,5
26,6
100
20060
100
9,8
16,6
27
60
18020
20
Rubberprofielen - Uitgave 2010
42
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
EPDM/staal klemprofielen
Profiel ERIKS Art.n° Kleur Klembereik (mm) L. max. (m) Buigradius Profielnr. 1149608 zwart 1,0 - 2,0 50 2615 10000301 zwart 1,5 - 2,5 50 2551
11149610 zwart 1,0 - 3,0 50 2617
11149611 zwart 1,0 - 2,5 50 2618
19. Klemprofielen
Deel 1: volrubber
9,2
20
8,3
13,1
23,7
8,6
16,7
27,3
8,7
22,3
33
8,7
60
20020
20
60
25070
30
80
25060
25
150
25020
20
Rubberprofielen - Uitgave 2010
43
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
Wat is TpeRX / voordelen / eigenschappen
TPeRX® verwijst naar ERIKS’ TPe kwaliteit. TPe staat voor ‘ThermoPlastisch Elastomeer’ en is een productfamilie met een groot aantal verschillende basissamenstellingen, doch allen met dezelfde specifieke eigenschap dat ze elastisch zijn en bij ver-hoging van temperatuur viskeus worden.Het grote voordeel ten aanzien van rubber is dat TPe’s smelt-baar en bijgevolg ook eenvoudig extrudeer- en lasbaar zijn, waardoor het gebruik van tapes, contactlijm of vulkanisatietech-nieken overbodig worden. Naast deze belangrijke voordelen kan ook het ecologisch aspect niet geminimaliseerd worden, TPe’s zijn namelijk recyclebaar.TPe’s kunnen met dezelfde technieken als plastics worden gefabriceerd tot allerlei gebruiksproducten. Zonder aan hun hoge elasticiteit te moeten inboeten, valt het (na)vulkaniseren zoals bij rubber weg. TPe producten vinden we terug in een verscheidenheid van kleuren en toepassingen in diverse indus-trieën ook mede dankzij het feit dat TPe’s verkrijgbaar zijn in FDA-kwaliteit. Algemeen kunnen we stellen dat TPe’s de eigen-schappen van rubbers combineren met de eenvoudige verwer-king als bij plastics.
Co-extrusieERIKS is continu bezig met innovatie. We kunnen nu de voor-delen van TPE productie gebruiken in co-extrusie. Gevoelig goedkopere matrijzen, lagere min.hoeveelheden en kortere productietijden t.o.v. rubber zijn nu mogelijk.Co-extrusie kan een combinatie van 2 hardheden zijn, maar ook een combinatie van harde TPE en sponsrubber TPE
SponsNet zoals de co-extrusie kunnen we ook hier de voordelen van TPE gebruiken.
ProductindelingSBS en SEBS• van 10 tot 95 shore A
TPV• Santoprene®• EPDM/PP• van 35 tot 95 shore A
Voordelen
• Verouderingsbestendig, lange levensduur. TPe’s degraderen nauwelijks onder UV-belasting en door
inwerking van ozon vindt geen erosie plaats. Verder zijn TPe’s ongevoelig voor wateropname waardoor een zeer lange levensduurverwachting gegarandeerd wordt.
• Goed afdichtend vermogen op lange termijn.
• Lage matrijskosten. De kosten voor het vervaardigen van ee nmatrijs t.b.v. een nieuw TPe-profiel liggen opmerkelijk lager dan bij extrusie van rubberprofielen.
• Nieuwe profielen vanaf 25m. Indien voor een bepaalde toe-passing de reeds vervaardigde profielen voor u ontoereikend zijn, bestaat de mogelijkheid om profielen, volledig naar uw wens, reeds vanaf 25 meter te vervaardigen.
• Korte levertijden. ERIKS streeft ernaar om nieuwe TPe-profielen binnen vier weken tot bij u te leveren. Wanneer het gaat om reeds vervaardigde profielen wordt deze levertijd van-zelfsprekend gevoelig gereduceerd.
• Recycleerbaar. TPe’s zijn bijzonder milieuvriendelijk daar ze geen halogeen als chloor, fluor, broom of jodium bevatten. Daarnaast komen er bij de verwerking van TPe’s ook geen weekmakers aan te pas. TPe’s zijn daarom zeer homogeen en zuiver zodat hergebruik, als duurzame grondstof in nieuwe primaire eindproducten, aan het einde van hun levensduur mogelijk wordt.
• Vanaf 10 tot 90 shore A
• FDA en USP compliance. Bepaalde types zijn geschikt voor voedingscontact en medische toepassingen.
• In vele kleuren verkrijgbaar: uitgebreid kleurenpallet
• Specials: - Mogelijkheid tot zelfklevende uitvoering - Vlamdovende types - Lasbaar tot kaders - Antimicrobiologische uitvoering
Deel 2: TPeRX®
Rubberprofielen - Uitgave 2010
44
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
In ons productiecenter hebben we een 800-tal matrijzen ter beschikking voor TPeRX®-Quick Supply. In ieder van onderstaande profielen zijn enkele tientallen matrijzen beschikbaar.
Deel 2: TPeRX®
• • • Contacteer onze verkooporganisatie voor verdere details • • •
Shape 1
Shape 6
Shape 11
Protection Groove
Shape 2
Shape 7
Shape 12
Square & Rectangle
Shape 3
Shape 8
Shape 13
Tubes
Shape 4
Shape 9
Shape 14
Rings
Shape 5
Shape 10
Different shapes
Angle & Welding
Snel en Betrouwbaar!
We produceren in één week iedere lengte boven de 25m in ieder van deze beschikbare matrijzen in TPE
Rubberprofielen - Uitgave 2010
45
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
Silicone heeft enkele kenmerkende eigenschappen vergeleken met andere rubbers:
• hoge temperatuurbestendigheid van -60° tot + 200°C (standaard types) en van -110° tot + 280°C (speciale typen)• weers- en verouderingsbestendig• ozonbestendig• reuk-en smaakloos• elektrisch isolerend• water en lijm afwijzend • in vele kleuren leverbaar zonder beïnvloeding van het kwaliteitsniveau• vele FDA & USP conforme kwaliteiten• volgens brandnormen bv. UL 94
Het omvangrijke programma silicone profielen van ERIKS stelt u in staat voor nagenoeg ieder vraagstuk de juiste oplossing te vinden. Het programma omvat zowel U-profielen met ronde als rechte bodem, kraal- of muzieknootprofielen in diverse uitvoeringen, vele maatvoeringen trapeziumprofielen en een uitgebreid programma profielen volgens teke-ning. Silicone profielen worden daar toegepast waar temperatuur en hygiëne een grote rol spelen. Maar ook als kleurvastheid en afwerking worden vereist.
Standaard worden de profielen in een transparante uitvoering geproduceerd. Wij kunnen u echter uit dezelfde matrijs andere kleuren en hardheden leveren. Geeft u ons in die gevallen het profielnummer, de gewenste hardheid en kleur op en wij laten u onze mogelijkheden weten.
Op maat!Silicone profielen zijn op relatief goedkope manier op maat te maken. Extrusiematrijzen zijn al mogelijk vanaf 25m en levertijden van 3-4 weken zijn meer regelmaat dan uitzondering. Ook kunnen vele kleuren gekozen worden.
Deel 3: silicone
Rubberprofielen - Uitgave 2010
46
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
Silicone Profielen
Door de 40-jarige ervaring in profielen hebben wij een aantal silicone kwaliteiten ontwikkeld, ons baserend op de grondstoffen van wereldproducenten. Door de diverse toepassingsdomeinen van silicone zijn door de jaren heen een aantal families ontstaan die inzetbaar zijn bij een breed gamma toepassingen.
Deel 3: silicone
Silicone Profielen
Hardheid FDA Temperatuur Toepassingen Shore A °CStandaard types 30-80 ja -60/+200 goede mechanische eigenschappen, meest gebruikte compound
Hoge treksterkte types 40-77 ja -60/+200 waar extreme treksterkte en scheurweerstand nodig is
Hoge temperatuur 40-70 ja -60/+315 behoudt eigenschappen bij wisselende temperaturen; is goed bij types lage druk stoomtoepassingen
Vlambestendige 50-70 neen tot 250 vlambestendig naar UL VO rating; ook leverbaar in Low Smoke types Low Toxicity toepassingen naar BS 6853
Elektrisch leidende 70 neen tot 200 weerstand onder de 10 Ohm types
Platinum cured types 50-70 ja tot 200 zeer zuivere silicone voor medische en pharma toepassingen
11
r u b b e r t e c h n o l o g y
r u b b e r p r o f i l e s
18.05.2009
This information is, to the best of our knowledge, accurate and reliable to the date indicated. The above mentioned data have been obtained by tests we consider as reliable. We don’t assure that the same results can be obtained in other laboratories, using different conditions by the preparation and evaluation of the samples.
VMQ silicone profile st-sV-60-901 - technical Data sheet
1. IntroductionSilicone compound ST-SV-60-901 is a selfextinguishing silicone elastomer. In compliance with UL94V1 (2 mm slabs) and DIN 7863 A and B. Used for window profiles.
2. Product Description
3. Physical Properties
Chemical Composition :Physical form :Colour :Odour :Storage stability * :
Vinyl Methyl Silicone RubberMouldings / ExtrusionsTranslucent & other coloursNone± 10 years
Test Method Norm Test ValuesHardness ISO 48 Method M 60° ± 5° IRHDTensile Strength at break ISO 37 7,0 N/mm2
Elongation at break ISO 37 380%Specific Weight ISO 2781 1,18Compression Set ISO 815 22h/175°C 22%
4. Temperature Resistance• -20°to+200°C
5. Chemical ResistanceSIP : very goodCIP : badHeat Ageing : excellentSterilisation : excellent
6. Advantages• Self-extinguishing
7. Other Information• Foll.DIN7863AandB• Foll.UL94V1(2mmslabs)• Othercoloursondemand
* :FollowingISO2230conditions
10
r u b b e r t e c h n o l o g y
r u b b e r p r o f i l e s
18.05.2009
This information is, to the best of our knowledge, accurate and reliable to the date indicated. The above mentioned data
have been obtained by tests we consider as reliable. We don’t assure that the same results can be obtained in other
laboratories, using different conditions by the preparation and evaluation of the samples.
VMQ silicone profile ht 55 W - technical Data sheet
1. IntroductionSilicone compound HT 55 W is a technical standard silicone elastomer.
2. Product Description
3. Physical Properties
Chemical Composition :
Physical form
:
Colour
:
Odour
:
Storage stability * :
Vinyl Methyl Silicone Rubber
ExtrusionsIvoryNone
± 10 years
Test Method
Norm
Test Values
Hardness
ISO 48 Method M 55° ± 5° IRHD
Tensile Strength at break
ISO 37
10,4 MPa
Elongation at break
ISO 37
496%
Specific Weight
ISO 2781
1,15
Compression Set
ISO 815
22h/177°C
35%
Tear Strength
ISO 34-1
21 N/mm
4. Temperature Resistance
• -60°to+300°C5. Chemical Resistance
SIP
: very good
CIP
: bad
Heat Ageing : excellent
Sterilisation : excellent
6. Advantages• Qualitysuitableforextrusion
7. Other Information
• Dimensionaltolerancesaccording
ISO 3302-1 E2• AdditionofstabilizerRandheat
stabilizerH6allowsanoperating
temperature up to 300°C
• AllingredientsareFDAandBgVV
approved
* :FollowingISO2230conditions
Data sheets op aanvraag of op:
www.rubbertechnology.info
Rubberprofielen - Uitgave 2010
47
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
1. Standaard profielenSilicone THT onderscheidt zich van de gewone silicone kwaliteiten op het gebied van hoge temperatuursbestendigheid tot 300°C.
Deel 3: silicone
Art. n°: 10000377 L. max.: 25 mNR S-106 MVQ Silicone-THT 60 roodbruin
Art. n°: 10000379 L. max.: 25 mNR S-118 MVQ Silicone-THT 60 roodbruin
Art. n°: 10000382 L. max.: 25 mNR S-131 MVQ Silicone-THT 60 roodbruin
Art. n°: 10000380 L. max.: 25 mNR S-123 MVQ Silicone-THT 60 roodbruin
Art. n°: 10000384 L. max.: 25 mNR S-158 MVQ Silicone-THT 60 roodbruin
Art. n°: 10000378 L. max.: 25 mNR S-111 MVQ Silicone-THT 60 roodbruin
Art. n°: 10000410 L. max.: 25 mNR 1838 MVQ Silicone 40 roodbruin
Art. n°: 10000381 L. max.: 25 NR S-124 MVQ Silicone-THT 60 roodbruin
Art. n°: 10000373 L. max.: 25NR S-100 Silicone THT 60 roodbruin
Art. n°: 10000374 L. max.: 25NR S-101 Silicone-THT 60 roodbruin
Art. n°: 10000376 L. max.: 25NR S-105 MVQ Silicone-THT 60 roodbruin
Art. n°: 10000383 L. max.: 25 mNR S-143 MVQ Silicone-THT 60 roodbruin
10
35
1
17
16
1,7
18
15,5
2
11,5
15,5
10,5
8
2,5
2,5
4
12
23
1,3
10,5
10
2,5
12,5
17
17,5
2
1
5
57
16
35
1,1
24
13
3
3
5,5
13,5
19
18.5
Rubberprofielen - Uitgave 2010
48
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
1. Profielen op maatERIKS heeft een paar duizend matrijzen beschikbaar voor productie van min. 25 meter, en dit in diverse vormen zoals u kunt zien in onderstaand overzicht.
Deel 3: silicone
Rubberprofielen - Uitgave 2010
49
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
ERIKS data sheet cel- en sponsrubber profielen Type CR* compound 329K210 cellular rubberKwaliteit NeopreneDichtheid kg/m3 180-220Temperatuurtest (°C) -30/+110Corrosie test uitstekendBrandbaarheidstest zelfdovendCompressie set (%) DIN 53517 • 24 u bij 23°C 40-48• 24 u bij 70°C 85-95Compressie deflection ASTM D 1056 voor 25% compressie 45-60in KPa Kleur zwart Opmerking ook zelfklevend
Wat is celrubber en wat is sponsrubber?
CelrubberCelrubber is een geschuimd materiaal, dat uit met inert gas gevulde gesloten cellen bestaat (de cellen staan dus niet met elkaar in verbinding). Celrubber is daardoor vol-komen ondoordringbaar voor zowel gas als vloeistof. Het wordt in blokvorm in matrijzen aangemaakt en vervolgens worden de 30 tot 40 mm dikke blokken door splijting op de gewenste dikte gebracht.De originele blokken hebben aan weerszijden een huid. Bij de op maat gespleten pla-ten ontbreekt deze huid, wat echter geen invloed heeft op de ondoordringbaarheid.
SponsrubberSponsrubber daarentegen is een geschuimd materiaal met overwegend open cellen (de cellen staan onderling dus wel met elkaar in verbinding). Sponsrubber is in profiel- en snoervorm, eveneens ten gevolge van het productieproces, rondom voorzien van een gladde aaneengesloten huid. Deze huid functioneert min of meer als een afdich-tende laag. Deze beperkt zich uitsluitend tot de buitenzijde.
Deel 4: cel- en sponsrubber
20
r u b b e r t e c h n o l o g y
cellular & sponge rubber
sheets - strips - gaskets
01.01.2008
This information is, to the best of our knowledge, accurate and reliable to the date indicated. The above mentioned data
have been obtained by tests we consider as reliable. We don’t assure that the same results can be obtained in other
laboratories, using different conditions by the preparation and evaluation of the samples.
329 k 210 - technical Data sheet1. Introduction• CR (Chloroprene) foll. DIN ISO 1629
• Soft elastic cellular rubber with closed cells.
• Cellsize = ± 0,2-0,5 mm foll. DIN 7726. 2. Physical Properties
Test Method
Norm Test Values
Density
DIN 53 420 180-240 kg/m3
Tensile Strength
DIN 53 571 600-800 kPa
Elongation at break
DIN 53 571 200-250 %
Rebound Resilience DIN 53 512
45-60 %
Compression Set
DIN 53 517
72h/23°C
30-50 %
24h/70°C
85-95 %
Compression Deflection ASTM D 1056 50-80 kPa
Ozone Test
DIN 53 509 tear view 0
Outdoor Exposure
DIN 53 386 surface a little crumbly,
preferably no exposure
during very long periods
Water Absorption
ASTM D 1056 5 % max.
Corrosion
DIN 53 428 - on Cu minimal colour
change, no corona
- on Ag no colour change
Flammability
self-extinguishing within a
short time after removal
from the flame
Colour
black
Linear Shrinkage after 22h/70°C without < 10 % max.
3. Temperature Resistance• -30° to +110°C
4. Application• Most acids in diluted concentration
• Glykol• Seawater• Alcohol
• Acetylene• Mineral oil and grease• Brandy• Photodevelopment fluids• Silicate ester lubricants• Silicone oils and greases
5. Other Information • Size tolerances according DIN 7715 P3.
• Produced in block size approx. 1400 x 1000 mm up to 44 mm thickness.
• Material can be waterjetcut, cut, stamped, milled, grind, glued.
Data sheets op aanvraag of op:
www.rubbertechnology.info*CR: ook gekend als Neoprene™
Rubberprofielen - Uitgave 2010
50
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
Deel 4: cel- en sponsrubber
1. Celrubber
1.1 Vierkant:afname per rol
1.2 Rechthoekig: afname per rol
Celrubber
329K210 CR* mm (soortelijk gewicht
ca. 0,20kg/cm3)
5x5 Art.n° L.max. 6x6 Art.n° L.max. 8x8 Art.n° L.max. 8,5x8,5 Art.n° L.max. 9x9 Art.n° L.max. 10x10 Art.n° 10000051 L.max. 10m12x12 Art.n° L.max. 13x13 Art.n° L.max. 14x14 Art.n° L.max. 15x15 Art.n° 10000055 L.max. 10m16x16 Art.n° L.max. 20x20 Art.n° 10000060 L.max. 10m22x22 Art.n° L.max. 25x25 Art.n° L.max. 30x30 Art.n° 10000070 L.max. 10m
Celrubber
329K210 CR* mm (soortelijk gewicht
ca. 0,20kg/cm3)
25x5 Art.n° 10000066 L.max. 20m25x6 Art.n° L.max. 25x8 Art.n° L.max. 25x10 Art.n° 10000062 L.max. 10m25x12 Art.n° L.max. 25x15 Art.n° 10000063 L.max. 10m25x20 Art.n° 10000064 L.max. 10m30x5 Art.n° 10000071 L.max. 20m30x10 Art.n° 10000067 L.max. 10m30x12 Art.n° L.max.30x15 Art.n° 10000068 L.max. 10m30x16 Art.n° L.max. 30x20 Art.n° 10000069 L.max. 10m40x8 Art.n° L.max. 40x10 Art.n° 10000072 L.max. 10m45x10 Art.n° L.max. 50x25 Art.n° L.max. 40x15 Art.n° L.max.
Celrubber
329K210 CR* mm (soortelijk gewicht ca. 0,20kg/cm3)6x4 Art.n° L.max. 8x6 Art.n° L.max. 10x3 Art.n° 1000052 L.max. 20m10x5 Art.n° 10000053 L.max. 20m10x6 Art.n° L.max. 10x8 Art.n° L.max. 12x8 Art.n° L.max. 14x8 Art.n° L.max. 15x5 Art.n° 10000056 L.max. 20m15x10 Art.n° 1000054 L.max. 10m15,5x10 Art.n° L.max. 16x8 Art.n° L.max. 16x10 Art.n° 1000057 L.max. 10m16x12 Art.n° L.max. 20x5 Art.n° 10000061 L.max. 20m20x10 Art.n° 1000058 L.max. 10m20x15 Art.n° 10000059 L.max. 10m20x16 Art.n° L.max. 25x3 Art.n° 10000065 L.max. 20m
*CR: ook gekend als Neoprene™
Rubberprofielen - Uitgave 2010
51
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
Cellular rubber - CR*, compound nr 329K210
ERIKS b x d rollengte ERIKS b x d rollengte ERIKS b x d rollengte Art.n° m Art.n° m Art.n° m Soortelijk Soortelijk Soortelijk gewicht: gewicht: gewicht: 0,20 kg/cm3 0,20 kg/cm3 0,20 kg/cm3
10000028 5 x 2 mm 20 10000036 20 x 10 mm 10 10000027 50 x 5 mm 2010000046 5 x 3 mm 20 10000013 25 x 2 mm 20 10000045 50 x 10 mm 1010000000 10 x 2 mm 20 10000014 25 x 3 mm 20 10000030 60 x 5 mm 2010000001 10 x 3 mm 20 10000015 25 x 4 mm 20 10000047 60 x 10 mm 1010000002 10 x 4 mm 20 10000016 25 x 5 mm 20 10000031 70 x 5 mm 2010000003 10 x 5 mm 20 10000017 30 x 2 mm 20 10000048 70 x 10 mm 1010000033 10 x 6 mm 10 10000018 30 x 3 mm 20 10000034 10 x 8 mm 10 10000019 30 x 4 mm 20 10000032 10 x 10mm 10 10000020 30 x 5 mm 20 10000004 12 x 3 mm 20 10000042 30 x 6 mm 10 10000005 15 x 2 mm 20 10000043 30 x 8 mm 10 10000006 15 x 3 mm 20 10000039 30 x 10 mm 10 10000007 15 x 4 mm 20 10000041 30 x 20 mm 10 10000008 15 x 5 mm 20 10000040 30 x 15 mm 10 10000035 15 x 6 mm 10 10000021 35 x 3 mm 20 10000009 20 x 2 mm 20 10000022 40 x 3 mm 20 10000010 20 x 3 mm 20 10000023 40 x 4 mm 20 10000011 20 x 4 mm 20 10000024 40 x 5 mm 20 10000012 20 x 5 mm 20 10000044 40 x 10 mm 10 10000037 20 x 6 mm 10 10000025 50 x 3 mm 20 10000038 20 x 8 mm 10 10000026 50 x 4 mm 20
* = Levering uitsluitend per volle rol
• • • Maatwerk • • •Alles is mogelijk, zie datasheets en vraag aan
Deel 4: cel- en sponsrubber
1. Celrubber
1.3 Zelfklevende strip: afname per rol
*CR: ook gekend als Neoprene™
Rubberprofielen - Uitgave 2010
52
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
Sponsrubber
CR* NR FPM** Silicone ER 16 compound nr compound nr Compound nr 329K775 900K600 514K700 Ø zwart grijs zwart wit Soortelijk gewicht Soortelijk gewicht Soortelijk gewicht Soortelijk gewicht 0,50 (<12mm) / 0,70 (>12mm) 0,60 kg/cm3 0,80 kg/cm3 0,28 kg/cm3
3 mm Art.n° 10000123 L.max. 100m 4 mm Art.n° 10000124 10068316 L.max. 100m 25 m 5 mm Art.n° 10000125 11086823 L.max. 100m 25 m 6 mm Art.n° 10000126 11073349 L.max 100m 25 m 7 mm Art.n° 10000127 L.max. 100m 8 mm Art.n° 10000128 11086824 L.max. 100m 25 m 10 mm Art.n° 10000129 10000320 10000307 11086825 L.max. 100m 50m 10m 20 m 12 mm Art.n° 10000134 11071199 L.max 50 m 25 m 15 mm Art.n° 10000135 10000321 1107782 L.max. 50 m 50 m 25 m 16 mm Art.N° 11086826 L.max. 25 m 18 mm Art.n° 10000130 L.max. 20 m 20 mm Art.n° 10000131 10000318 L.max. 20 m 20 m 25 mm Art.n° 10000132 L.max. 20 m 30 mm Art.n° 10000136 10000319 L.max. 30 m 30 m 35 mm Art.n° 10000133 L.max. 40 m Andere afmetingen op aanvraag
Deel 4: cel- en sponsrubber
2. Sponsrubber
2.1 Rondsnoer
Rubberprofielen - Uitgave 2010
53
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
2. Sponsrubber
2.2 Vierkant
Sponsrubber - CR*
CR* VMQ Silicone FPM** compound nr compound nr 329K775 514K700 (s.g. = 0,50 kg/cm3) (s.g. = 0,50 kg/cm3) (s.g. = 0,80 kg/cm3)mm zwart wit zwart5x5 Art.n° L.max. 6x6 Art.n° L.max. 8x8 Art.n° 10000404 L.max. 10m 8,5x8,5 Art.n° L.max. 9x9 Art.n° L.max. 10x10 Art.n° 10000075 10000386 10000302 L.max. 20m 20m 20m12x12 Art.n° 10000076 L.max. 20m 13x13 Art.n° L.max. 14x14 Art.n° L.max. 15x15 Art.n° 10000079 10000303 L.max. 10m 10m16x16 Art.n° 10000391 L.max. 10m 20x20 Art.n° 10000086 10000393 10000305 L.max. 10m 10m 10m22x22 Art.n° 10000395 L.max. 10m 25x25 Art.n° 10000093 L.max. 10m 30x30 Art.n° L.max.
Deel 4: cel- en sponsrubber
*CR: ook gekend als Neoprene™**FPM: ook gekend als Viton®
Rubberprofielen - Uitgave 2010
54
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
Sponsrubber
CR* NR VMQ Silicone FPM** compound nr 329K775 compound nr 900K600 compound nr 514K700 (s.g. = 0,70 kg/cm3) (s.g. = 0,60 kg/cm3) (s.g. = 0,50 kg/cm3) (s.g. = 0,80 kg/cm3) b x d zwart grijs wit zwart 6x4 Art.n° L.max. 8x6 Art.n° 10000073 10000403 L.max. 50m 50m 10x3 Art.n° L.max. 10x5 Art.n° 10000387 L.max. 50m 10x6 Art.n° 10000388 L.max. 20m 10x8 Art.n° 10000389 L.max. 20m 12x8 Art.n° 10000077 L.max. 20m 14x8 Art.n° L.max. 15x5 Art.n° 10000080 10000313 10000390 L.max. 20m 20m 20m 15x10 Art.n° 10000385 L.max. 20m 15,5x10 Art.n° L.max. 16x8 Art.n° 10000083 L.max. 20m 16x10 Art.n° 10000081 L.max. 20m 16x12 Art.n° 10000082 L.max. 20m 20x5 Art.n° 10000087 10000315 10000394 L.max. 20m 20m 20m 20x10 Art.n° 1000084 10000314 10000392 10000304 L.max. 20m 20m 20m 10m 20x15 Art.n° L.max. 20x16 Art.n° 10000085 L.max. 10m
2. Sponsrubber
2.3 Rechthoekig
Deel 4: cel- en sponsrubber
*CR: ook gekend als Neoprene™**FPM: ook gekend als Viton®
Rubberprofielen - Uitgave 2010
55
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
Sponsrubber
CR* NR VMQ Silicone FPM** compound nr 329K775 compound nr 900K600 compound nr 514K700 (s.g. = 0,70 kg/cm3) (s.g. = 0,60 kg/cm3) (s.g. = 0,50 kg/cm3) (s.g. = 0,80 kg/cm3) b x d zwart grijs wit zwart 25x3 Art.n° L.max. 25x5 Art.n° L.max. 25x6 Art.n° 10000094 10000316 L.max. 20m 20m 25x8 Art.n° 10000397 L.max. 10m 25x10 Art.n° 10000090 L.max. 20m 25x12 Art.n° 10000094 L.max. 20m 25x15 Art.n° 10000396 L.max. 10m 25x20 Art.n° 10000092 L.max. 10m 30x5 Art.n° L.max. 30x10 Art.n° 10000097 10000398 L.max. 20m 20m 30x12 Art.n° 10000098 10000399 L.max. 20m 20m 30x15 Art.n° L.max. 30x16 Art.n° 10000099 L.max. 10m 30x20 Art.n° 10000100 10000400 L.max. 10m 10m 40x8 Art.n° 10000306 L.max. 10m 40x10 Art.n° L.max. 45x10 Art.n° 10000102 L.max. 20m 50x25 Art.n° 10000104 L.max. 10m 40x15 Art.n° L.max.
2. Sponsrubber
2.3 Rechthoekig
Deel 4: cel- en sponsrubber
*CR: ook gekend als Neoprene™**FPM: ook gekend als Viton®
Rubberprofielen - Uitgave 2010
56
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
12,5
14
3 r
3 r
8
6
6
12
7
15
2010
5 r
6 r
17
12
16
12
4 r
4,5 r
9
9
25
10
2
Art. n°: 10000095 L. max.: 25 mNR 280 CR* spons zwart
Art. n°: 10000096 L. max.: 25 mNR 304 CR* spons zwart
Art. n°: 10000103 L. max.: 25 mNR 509 CR* spons zwart
Art. n°: 10000108 L. max.: 25 mNR 606 CR* spons zwart
Art. n°: 10000111 L. max.: 25 mNR 622 CR* spons zwart
Art. n°: 10000113 L. max.: 25 mNR 703 CR* spons zwart
Art. n°: 10000074 L. max.: 25 mNR 103 CR* spons zwart
Art. n°: 10000114 L. max.: 25 mNR 715 CR* spons zwart
Art. n°: 10000118 L. max.: 25 mNR 9 CR* spons zwart
2. Sponsrubber
2.4 Sponsrubber profielen - specials
Deel 4: cel- en sponsrubber
*CR: ook gekend als Neoprene™
Rubberprofielen - Uitgave 2010
57
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
30
2
14
4,5
62
1,6
12
14
54,5
11
15
43
5
11
1
2
15
12
6 r
3
96
12
123
36
10
15
2
6 r
10
10
43
11
2
7
11
6
15
2
3,5
Art. n°: 10000106 L. max.: 25 mNR 597 CR* spons zwart
Art. n°: 10000101 L. max.: 25 mNR 359 CR* spons zwart
Art. n°: 10000105 L. max.: 25 mNR 51 CR* spons zwart
Art. n°: 10000116 L. max.: 25 mNR 895 CR* spons zwart
Art. n°: 10000119 L. max.: 25 mNR 908 CR* spons zwart
Art. n°: 10000120 L. max.: 25 mNR 923 CR* spons zwart
Art. n°: 10000121 L. max.: 25 mNR 956 CR* spons zwart
Art. n°: 10000122 L. max.: 25 mNR 961 CR* spons zwart
Art. n°: 10000089 L. max.: 25 mNR 256 CR* spons zwart
Art. n°: 10000322 L. max.: 25 mNR 897 CR* spons zwart
Art. n°: 10000078 L. max.: 25 mNR 151 CR* spons zwart
Deel 4: cel- en sponsrubber
2. Sponsrubber
2.4 Sponsrubber profielen - specialsBel ons vrijblijvend voor andere kwaliteiten en maten dan deze die zijn afgebeeld:
*CR: ook gekend als Neoprene™
Rubberprofielen - Uitgave 2010
58
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
2. Spons 2.5 Speciale compounds
ERIKS produceert naar tekening EPDM, CR*, silicone, FKM en TPe sponsrubberprofielen in diverse hardheden.
Deel 4: cel- en sponsrubber
11
r u b b e r t e c h n o l o g ysponge rubber profiles
01.05.2007
This information is, to the best of our knowledge, accurate and reliable to the date indicated. The above mentioned data
have been obtained by tests we consider as reliable. We don’t assure that the same results can be obtained in other
laboratories, using different conditions by the preparation and evaluation of the samples.
714 K 500 pr - technical Data sheet1. Introduction• Silicone rubber foll. ISO 1629
• Soft elastic silicone sponge rubber with open cells
• Cellsize is ± 0,2 - 0,7 mm foll. DIN 77262. Physical Properties
Test Method
Norm
Test Values
Density
DIN 53 420 450 - 550 kg/m3
Tensile Strength
DIN 53 571 > 850 kPa
Elongation at break DIN 53 571
> 280 %
Rebound Resilience DIN 53 512
40 - 50 %
Compression Set
DIN 53 517
at 23°C
16 - 22 %
at 70°C
30 - 35 %
Compression Deflection ASTM D 1056 60 - 90 kPa
Ozone Test
DIN 53 509 tear view 0
Outdoor Exposure
DIN 53 386 good
Corrosion
DIN 53 428 on Cu: no colour change
on Ag: no colour change
Flammability
burns
Water absorption
DIN 53 428 none
Colour
white
Linear Shrinkage after 24h/70 °C without max 1 %
(10 mm thick)
3. Temperature Resistance• -70° to +200°C• After treatment up to 250 °C4. Application• Acetylene, methanol, acetone
• Alcohol• Photodevelopment fluids• Most acids in diluted or strong concentration
• Mineral oils and greases• Seawater• Kerosine• Helium
• Lanoline• Ozone• Petrol and Butane
5. Other Information • This quality can be produced in sheet, profiles and moulded parts
• Size tolerances: ±10%
Data sheets op aanvraag of op:
www.rubbertechnology.info surf naar: cellular rubberof: downloads/datasheets
*CR: ook gekend als Neoprene™
Rubberprofielen - Uitgave 2010
59
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
5.1. Veiligheid/bescherming in PUR schuim Veiligheid en signalisatie, twee woorden die meer en meer opkomen in de huidige samenleving en dan zeker op en rond de werkvloer.ERIKS wil hierbij graag een handje toesteken en daarom lanceren we onze bescher-mings- en signalisatieprofielen.
Deze profielen zijn uit een zeer slijtvast, stootabsorberend PUR-schuim 300kg/m³ gepro-duceerd en worden hoofdzakelijk gebruikt om werknemers te beschermen voor gevaar-lijke randen, vlakken en kanten. De stukken hebben vaste productielengtes van 1,5m (makkelijk te versnijden) en zijn zwart. Om de signalisatie te verbeteren kunnen ze wor-den uitgerust met een opvallende geel-zwart gestreepte folie. (wit is mogelijk op aan-vraag)Daarenboven kunnen de meeste types voorzien worden van een zelfklevende laag op het montagevlak zodat ze ook nog eens gemakkelijk te installeren zijn.
Om het geheel compleet te maken zijn er voorgevormde hoekstukken (2 of 3 benen) leverbaar. Deze zijn in hetzelfde slijtvaste PUR-schuim en kunnen ook zelfklevend gemaakt worden.
Uitvoeringen(de middelste kan niet zelfklevend uitgevoerd worden)
40 4040
20
32
8/1025 35
Deel 5: specials
Rubberprofielen - Uitgave 2010
60
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
38
60
25
19 22
Ø45
38
60
38
88
25
20
30
Ø45
20
39
35
65
5.1. Veiligheid/bescherming TpeRx® profielen zijn thermoplastische elastomeren. Dit materiaal combineert de mechanische eigenschappen van elastomeren (rubber) met de verwerkingseigenschap-pen van thermoplasten (plastics). Dit heeft als voordeel dat TpeRx profielen eenvoudige-re matrijzen nodig hebben, ze in een breder assortiment van hardheden bestaan en ze gemakkelijk ingekleurd kunnen worden.
Al deze eigenschappen brengen ons tot een nieuw product dat dezelfde doelstellingen heeft als de PUR-profielen: personen beschermen tegen verwondingen die ze kunnen oplopen wanneer ze zich stoten aan gevaarlijke randen, kanten of vlakken.
De TpeRx profielen bestaan in 6 versies, zijn standaard in het geel en op lengtes van 2m. Andere kleuren, zoals bv. fluo groen, zijn ook mogelijk maar op aanvraag.
Uitvoeringen:• vlakbescherming• vlakbescherming zelfklevend• vlakbescherming in combinatie met aluminium bevestigingsrail• hoekbescherming• hoekbescherming zelfklevend• hoekbescherming in combinatie met aluminium bevestigingsrail
Deel 5: specials
Art. n°: 11072497 L. max.: 20 mNR 6969 EPDM 65 zwart
Art. n°: 11072498 L. max.: 4 mNR 6976 EPDM 65 zwart
Rubberprofielen - Uitgave 2010
61
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
5.2. Opblaasbare dichtingen Cefil’air® opblaasbare pakking geeft een extra dimensie aan profielafdichtingen. Dankzij het gepatenteerde ontwerp en de geavanceerde materialen is de Cefil’air® een multifunctionele afdichting. Als onderdelen moeten worden afgedicht die ten opzichte van elkaar bewegen, of snel gekoppeld en losgekoppeld dienen te worden, zijn opblaas-bare afdichtingen de ideale oplossing. Het controleerbaar afsluiten van ruimtes zoals bij-voorbeeld clean rooms, opslagcontainers en droogdokken is een groot toepassingsge-bied voor de Cefil’air®. Andere voorbeelden zijn schuifdeuren, snelvergrendelingssyste-men, big bag-vulsystemen, geluidsisolatie, patrijspoorten, enz.
Deel 5: specials
Documentatie op aanvraag of bezoek onze website:
www.rubbertechnology.info surf naar: inflatable seals
Rubberprofielen - Uitgave 2010
62
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
5.3. EMI profielen
Wat is EMIEMI profielen worden gebruikt om apparaten, ruimten en systemen af te schermen tegen elektromagnetische straling zoals bijvoorbeeld bij;elektronica behuizingen,communicatie apparatuur, schakelkasten, meetkamers, medische-apparaten, radarinstallaties. Profielen uit ons standaardgamma worden voorzien van een vormaansluitend weefsel, met ingewe-ven metaal. Het weefsel heeft een uitstekende elektrische geleidbaarheid (elektrische weerstand < 0,03 Ω) door de aanwezigheid van koper, aluminium of zilver. Met de elasti-sche dichtingseigenschappen van de rubberprofielen en de goede geleidende kenmerken van het weefsel wordt een unieke dichting aangeboden ter voorkoming van “Electromagnetic interference”. Specialiteiten De geometrie en de kwaliteit van de profie-len beperkt zich niet tot het standaardprogramma.
Mogelijkheden• Vervaardiging van klantspecifieke uitvoeringen,ondersteuning bij uw ontwerp.• Speciale vervaardiging in 2 hardheden, vol/sponsrubber combinaties, klemprofielen met
speciale sponssecties.• EPDM vol- en sponsrubber compounds dewelke voldoen aan brandklassen DIN 5510 deel 2 ; brandbaarheidsklasse S4; rookontwikkelingsklasse SR2; afdruipklas-
se ST2 en UL 94 V0.
Deel 5: specials
Rubberprofielen - Uitgave 2010
63
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
Bio-Hygienic®Bio-Hygienic® Bio-Hygienic®
1. Wat is Bio-Hygienic®?
Een familie pro-actief zilvergevulde elastomeren die continu protectie bieden tegen micro-organismen.
ProbleemOnze leefwereld is inderdaad vol micro-organismen. Sommige zijn ongevaarlijk en helpen de vertering of zitten in voedingsstoffen zoals bijvoorbeeld kaas en bier. Andere micro-organismen zijn wel schadelijk en kunnen ziekten veroorzaken zoals MRSA (ziekenhuisbacterie). Rubberonderdelen en dichtingen zijn een voedingsbron voor microbiële groei. Rubbers bevatten meerdere vulstoffen die een groeibodem voor micro-organismen zijn. Dezelfde dichtingen worden bovendien in een vochtige warme omgeving toegepast, condities die ideaal zijn voor de verdere groei.
OplossingBio-Hygienic® compounds bevatten een actieve zilverbiocide die de groei van de bacteriën stopt. Zodra de bacterie of de microbe contact maakt met de rubber, absorbeert ze de vrije zilverionen die zich aan de oppervlakte van de rubber bevinden. Bio-Hygienic® doodt de bacterie of microben door de celwand af te breken. Bovendien wordt de pH-waarde in de cel dusdanig gewijzigd zodat deze zich niet meer vermenigvuldigen. Bio-Hygienic® blijft gedurende lange tijd actief, zelfs na meerdere CIP/SIP-reinigingen.
Inhoud Bio-Hygienic® additieven zijn gecertificeerd door volgende instanties:
• 1.WatisBio-Hygienic® ? Hoe werkt het?
• 2.Eriksstandaardcompounds
• 3.VoordelenvanBio-Hygienic®
• 4.Toepassingenenreferenties
• 5.Leveringsprogramma
• FDA FoodanddrugAdministration
• EPA EnvironmentalprotectionAgency
• FIFRA FederalInsecticide,
FungicideandrodenticideAct
• EFSA EuropeanFoodSafetyAgency
Op standaard rubber compounds ontwikkelen zich micro-organismen en veroorzaken verontreinigingen en geuren.
2. ERIKS standard compounds
Bio-Hygienic® compounds zijn vervaardigd volgens de strengste normen zodat een homogene verdeling van de ionen verzekerd is. Ze worden op geregelde tijdstippen gecontroleerd door ons labo waar de efficiëntie gecontroleerd wordt.
ERIKS beschikt over de volgende Bio-Hygienic® compounds:• HNBR 70 shore roodbruin peroxide cured• EPDM 70 shore wit peroxide cured• VITON® 70 shore roodbruin• MVQSilicone70shoretransparentFDA• MVQSilicone70shoretransparentUSP
3. Voordelen van Bio-Hygienic®
• de zilverionen blijven actief na vele reiningingscycli.• de zilverionen komen ook vrij op plaatsen die met CIP/SIP
niet te bereiken zijn.• lagere onderhoudskosten• reukloos, smaakloos • tot200°Cafhankelijkvandecompound• kan in vele vormen geleverd worden.
4. Referenties
• Bravilor Bonamat Bravilor Bonamat gebruikt Bio-Hygienic®H-NBR886214
O-ringen als afdichting bij de productie van drinkwaterkoelers. UitvoerigetestsdoorBravilor(ASTME-2149)gavenaandat
deze compound een oplossing is voor de problemen rond de aangroei van Staphylococcus Aereus-bacteriën.
• Drankindustrie • DedrankindustriegebruiktmeerenmeerBio-Hygienic®
melkkoppellingsringen in plaats van silicone • Voorbeelden:BierindustrieinZuidNederland
• Voedingsindustrie Apparatenbouw o.a. magneetsystemen voor voedingsindus-
trie waarbij men in een nieuw ontwerp gebruik gaat maken van Bio-Hygienic® seals.
Bio-Hygienic®: De zilver antimicrobiële ionen beletten de groei van de bacteriën
• RDI in Gorssel VoorhetafdichtenvandeInjectionPistonineenmelkklauw
was het uitermate belangrijk dat zowel bij druk en vacuüm de dichting in beide richtingen absoluut afdichtte in een zeeragressieveomgevingmeteenabsolute100%werking.De afdichting staat bloot aan melk, water, jodium, per azijnzuur en wordt minimaal tweemaal per dag intensief gespoeldmetwaterenschoonmaakmiddeltotbijna100gradenCelcius.Hetmelkstelmoet100keerperdaglopen365dagenperjaar,jaarnajaar.
Hygiënisch, betrouwbaar en duurzaam. Bio-Hygienic® is de ideale oplossing.
ERIKS heeft RDI begeleid met de ontwikkeling van een speciale dubbelwerkende lipdichting die aan alle eisen voldeed.
• Producent keramische filterinstallaties voor dranken- en chemische industrie Hierbij is kritisch dat keramische filterdelen in combinatie
met epoxyhars een hogere uitzetting hebben t.o.v. behuizing en huidige dichting. Een nieuwe dichting werd ontwikkeld die de uitzetting kan verwerken met een zo klein mogelijke gesloten ruimte rond de dichting en de filter. Door gebruik van Bio Hygenic is vorming van bacteriegroei voorkomen.
®
®
Bacteriën tieren welig... ... niet meer met Bio-Hygienic!
5.4. Bio-Hygienic®
Wat is Bio-Hygienic®?Een rubberkwaliteit waar microben zich niet aan hechten en dit in tegenstelling tot ‘klassieke’ rubbrkwaliteiten.
Hoe werkt het?Het rubbermengsel is gevuld met een speciaal ontwikkeld product op basis van zilver-ionen. Deze ionen treden in werking wanneer ze in contact komen met microben. Dit zorgt ervoor dat microben zich niet hechten aan de rubber en de rubber kan dus makkelijk gerei-nigd worden.
UitvoeringZo goed als alles is mogelijk:• vormwerk• profielen• opblaasbare dichtingen• slangen
GebruikDe meeste toepassingen zullen zich vinden in:• voedselverwerking• verpakking• medische wereld
Deel 5: specials
®
Bio-Hygienic®Bio-Hygienic® Bio-Hygienic®
2
ERIKS bvPostbus2801800BKAlkmaarTheNetherlandsToermalijnstraat51812RLAlkmaarTheNetherlandsT +31(0)72.514.1514F +31(0)72.515.5645E info@eriks.nlwww.eriks.nl
ERIKS nvBoombekelaan3Hoboken2660T +32(0)3.829.2611F +32(0)3.828.3959E info@eriks.bewww.eriks.be
www.eriks.info Bio-Hygienic®
Stop bacteriën, kies voor ERIKS Bio-Hygienic®
5. Leveringsprogramma
• Melkkoppelingsringen in standaard afmetingen• Opblaasbare dichtingen• ProfieleninTPeRX®
• O-ringen• Klantspecifieke rubberonderdelen• Tri-cloverdichtingeninallestandaardmaten• SlangeninrubberenPUR
Alle Bio-Hygienic® producten worden geproduceerd volgens de FDA-richtlijnen
Toepassingen:
• voedingsmiddelenindustrie
• zuivelindustrie
• medischesector
®
®
Bio-Hygienic®Bio-Hygienic® Bio-Hygienic®
2
ERIKS bvPostbus2801800BKAlkmaarTheNetherlandsToermalijnstraat51812RLAlkmaarTheNetherlandsT +31(0)72.514.1514F +31(0)72.515.5645E info@eriks.nlwww.eriks.nl
ERIKS nvBoombekelaan3Hoboken2660T +32(0)3.829.2611F +32(0)3.828.3959E info@eriks.bewww.eriks.be
www.eriks.info Bio-Hygienic®
Stop bacteriën, kies voor ERIKS Bio-Hygienic®
5. Leveringsprogramma
• Melkkoppelingsringen in standaard afmetingen• Opblaasbare dichtingen• ProfieleninTPeRX®
• O-ringen• Klantspecifieke rubberonderdelen• Tri-cloverdichtingeninallestandaardmaten• SlangeninrubberenPUR
Alle Bio-Hygienic® producten worden geproduceerd volgens de FDA-richtlijnen
Toepassingen:
• voedingsmiddelenindustrie
• zuivelindustrie
• medischesector
®
®
Rubberprofielen - Uitgave 2010
64
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
RoHSDe Europese Unie heeft de een richtlijn betreffende beperking van het gebruik van bepaalde gevaarlijke stoffen in elektrische en elektronische apparatuur opgesteld. Deze RoHS-richtlijn die 1 juli 2006 van kracht is geworden, stelt dat nieuwe elektrische en elektronische apparatuur die op de markt wordt gebracht geen lood, kwik, cadmium, zeswaardig chroom, polybroombifenylen (PBB’s) of polybroomdifenylethers (PBDE’s) boven maximaal toegestane concentraties meer bevat.
Voor zover ons bekend bevatten onze materialen geen van de onder de richtlijn vallende chemische stoffen in concentraties hoger dan toegestaan. De certificatie van de totale chemische samenstelling is de exclusieve verantwoordelijkheid van de fabrikant.
Hierbij verklaren wij dat ERIKS tijdens het bewerken, opslaan of verwerken van deze materialen geen materialen toevoegt onder de RoHS-richtlijn vallen.
REACHERIKS heeft een blijvend engagement voor duurzame ontwikkeling. Wij onderschrijven de doelstellingen van de REACH wetgeving, omdat het streeft naar maximale transparantie van informatie en het minimaliseren van het gebruik van schadelijke stoffen. Het doel is de bevordering van zowel de menselijke gezondheid als het milieu.
Rubberwebsitewww.rubbertechnology.infowww.rubber.bewww.eriks.infowww.eriks.be
Deel 6: europese richtlijnen
Registration, Evaluation andAuthorisation of CHemicals
R E A C H
www.eriks.infoTechnical information NOW centralized available!
With technical info in multiple languages (English, Dutch, German and French) like:
Numerous technical datasheetsNumerous material safety datasheetsConstruction and installation instructionsMultiple online selection tools and calculatorsOver 4,000 pages of technical informationLinks to other technical websites on certifications and homologations
•••
•
•
•
O-Rings
Oil-Seals
Rubber Technology
Industrial Plastics
Flange Gaskets
Mechanical Seals
Hydraulic Seals
Rubberprofielen - Uitgave 2010
65
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
Profielnummer ERIKS artikelnr. Materiaal Max. lengte Hardheid Pagina0652 10000138 CR* 10 55 311119/44/95 11072502 NR 4 70 241619/44/97 11072609 NR 4 70 241838 10000410 MVQ Silicone 25 40 441910/44/99 11072605 NR 4 70 242210 10000218 EPDM 50 65 172056 10000205 EPDM 80 65 202063 10000206 EPDM 50 65 202070 10000207 EPDM 40 65 202087 10000208 EPDM 30 65 202094 10000209 EPDM 30 70 202133 10000211 EPDM 50 65 202157 10000215 EPDM 25 65 202164 10000216 EPDM 50 65 202188 10000217 EPDM 50 65 202195 10000213 EPDM 50 65 202227 10000183 CR* 50 65 172234 10000219 EPDM 45 65 172258 10000220 EPDM 30 65 172265 10000221 EPDM 50 65 172289 10000222 EPDM 25 65 172296 10000223 EPDM 25 65 172304 10000224 EPDM 50 65 172311 10000225 EPDM 35 65 172328 10000178 CR* 50 65 172335 10000226 EPDM 25 65 172359 10000227 EPDM 25 65 172366 10000228 EPDM 5 60 172373 10000229 EPDM 5 60 172397 10000230 EPDM 100 65 172405 10000231 EPDM 80 65 172412 10000141 CR* 100 55 172429 10000232 EPDM 50 65 202436 10000330 EPDM 25 65 202443 10000233 EPDM 40 65 202450 10000179 CR* 90 65 202467 10000142 CR* 50 55 202474 10000353 PVC/staal 100 362481 10000357 PVC/staal 100 362481 11149785 PVC/staal 100 362481 11084166 PVC/staal 100 362513 11030401 PVC/staal 100 362513 10000354 PVC/staal 100 362520 11109475 PVC/staal 100 362520 10000356 PVC/staal 100 362521 10000358 PVC/staal/EPDM 100 372522 11149786 PVC/staal 100 362523 10000359 PVC/staal/EPDM 50 372525 10000360 PVC/staal/EPDM 50 372527 10000361 PVC/staal/EPDM 50 382544 10000235 EPDM 50 65 34
Deel 7: Index artikelnummers
Rubberprofielen - Uitgave 2010
66
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
Deel 7: Index artikelnummers
Profielnummer ERIKS artikelnr. Materiaal Max. lengte Hardheid Pagina 2561 11115768 PVC/staal 100 362569 11132735 PVC/staal/EPDM 100 372570 11132926 PVC/staal/EPDM 50 372573/1 11154505 PVC/staal/EPDM 50 372573/2 11149567 PVC/staal/EPDM 50 372573/3 11154506 PVC/staal/EPDM 50 372584/2 11149584 PVC/staal/EPDM 50 382584/3 11154508 PVC/staal/EPDM 50 382586 11149586 PVC/staal/EPDM 25 382590/1 11149587 PVC/staal/EPDM 25 382590/2 11154509 PVC/staal/EPDM 25 382590/3 11154511 PVC/staal/EPDM 25 382592 11149588 EPDM plain rubber/ wireclamping/ EPDM sponsrubber 50 392596 11149590 EPDM plain rubber/ wireclamping/ EPDM sponsrubber 50 392596 10063032 EPDM plain rubber/ wireclamping/ EPDM sponsrubber 50 392597 11149591 EPDM plain rubber/ wireclamping/ EPDM sponsrubber 50 392602 11149604 EPDM plain rubber/ wireclamping/ EPDM sponsrubber 100 392606 11149605 EPDM plain rubber/ wireclamping/ EPDM sponsrubber 50 392607 11149606 EPDM plain rubber/ wireclamping/ EPDM sponsrubber 100 392614/2 11149645 EPDM plain rubber/ wireclamping/ EPDM sponsrubber 75 392614/3 11154514 EPDM plain rubber/ wireclamping/ EPDM sponsrubber 75 392624 11149614 PVC/staal 50 382645 10000185 EPDM 100 55 142683 10000144 CR* 20 55 142690 10000145 CR* 40 55 142708 10000236 EPDM 100 65 142715 10000237 EPDM 10 65 142722 10000238 EPDM 20 65 142739 10000239 EPDM 50 65 142753 10000240 EPDM 10 65 142756 10000335 EPDM 50 65 142777 10000241 EPDM 50 65 142878 10000181 CR* 50 65 162900 10000146 CR* 100 55 162931 10000244 EPDM 50 65 232955 10000246 EPDM 25 65 222962 10000247 EPDM 50 65 222986 10000182 CR* 25 60 223028 10000350 PVC 40 65 333112 10000187 EPDM 50 55 323136 10000199 EPDM 50 50 323143 10000191 EPDM 50 55 323206 10000147 EPDM 50 55 323213 10000193 EPDM 50 55 323298 10000049 Aluminium 6,5 343338 10000347 TPE 25 55 323345 10000346 TPE 50 55 323376 10000137 CR* 30 45 333383 10000325 NR 25 65 333390 10000251 EPDM 20 65 333408 10000177 CR* 25 65 33
Rubberprofielen - Uitgave 2010
67
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
Deel 7: Index artikelnummers
Profielnummer ERIKS artikelnr. Materiaal Max. lengte Hardheid Pagina 3415 10000252 EPDM 40 65 333446 10000150 CR* 25 55 343491 10000197 EPDM 50 55 343516 10000253 EPDM 25 65 343530 10000153 CR* 55 343686 10000365 SBR 5 65 283693 10000366 SBR 5 65 283701 10000367 SBR 5 65 283718 10000368 SBR 5 65 283725 10000372 SBR 5 65 284158 10000293 EPDM 50 70 314165 10000294 EPDM 25 70 316969 11072497 EPDM 20 65 606976 11072498 EPDM 4 65 607001 11828275 EPDM 25 70 277002 11828276 EPDM 25 70 277003 11828277 EPDM 12 70 277004 11588899 EPDM 20 70 257005 11417055 EPDM 50 70 257006 11828192 EPDM 25 70 257007 11828243 EPDM 20 70 257008 11395339 EPDM 15 70 257009 11469346 EPDM 25 70 257010 11652709 EPDM 20 70 257011 11828244 EPDM 20 70 257012 11456906 EPDM 50 70 257013 11828245 EPDM 15 70 257014 11828246 EPDM 20 70 257015 11828247 EPDM 15 70 257016 10000285 EPDM 20 70 257017 11828248 EPDM 15 70 257018 11828249 EPDM 15 70 257019 11828250 EPDM 20 70 257020 11828251 EPDM 15 70 257021 11287411 EPDM 50 70 257022 11828273 EPDM 15 70 257023 11268770 EPDM 15 70 257024 11828274 EPDM 15 70 257025 11287409 EPDM 14,5 70 257027 11828252 EPDM 70 25 7057 10000296 EPDM 50 70 178067 10000259 EPDM 50 65 239426 10000156 CR* 100 55 31s-100 10000373 Silicone-THT 25 60 44s-101 10000374 Silicone-THT 25 60 44s-105 10000376 MVQ Silicone-THT 25 60 44s-106 10000377 MVQ Silicone-THT 25 60 44s-111 10000378 MVQ Silicone-THT 25 60 44s-118 10000379 MVQ Silicone-THT 25 60 44s-123 10000380 MVQ Silicone-THT 25 60 44s-124 10000381 MVQ Silicone-THT 25 60 44s-131 10000382 MVQ Silicone-THT 25 60 44s-143 10000383 MVQ Silicone-THT 25 60 44s-158 10000384 MVQ Silicone-THT 25 60 44
Rubberprofielen - Uitgave 2010
68
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
Deel 7: Index artikelnummers
Profielnummer ERIKS artikelnr. Materiaal Max. lengte Hardheid Pagina 11828278 EPDM 30 70 34 11828280 EPDM 30 70 34 11828281 EPDM 30 70 34 11354196 EPDM 20 45 29 11365542 EPDM 15 45 29 11381127 EPDM 25 45 29 11394014 EPDM 20 45 29 11404143 EPDM 20 45 29 11487013 EPDM 20 45 29 11738436 EPDM 40 45 29 11738437 EPDM 20 45 29 11738438 EPDM 20 45 29 11738439 EPDM 15 45 29 11738440 EPDM 15 45 29 11738441 EPDM 20 45 29 11738442 EPDM 15 45 29 11738439 EPDM 15 45 29 11738494 EPDM 15 45 29 11738495 EPDM 15 45 29 11738496 EPDM 15 45 29 11738497 EPDM 15 45 29 11738498 EPDM 10 45 29 11738499 EPDM 10 45 29 11738500 EPDM 10 45 29 11738501 EPDM 5 45 29
*CR: ook gekend als Neoprene™
Rubberprofielen - Uitgave 2010
69
All the information in this documentation has been compiled with the greatest of care. Despite this we can bear no responsibility whatsoever for any errors present in the documentation. The recommendations are intended as guidelines.
www.eriks.info
www.rubbertechnology.info
www.rubbertechnology.infowww.eriks.infowww.eriks.bewww.eriks.nl
Technology Centers
Solutions in Rubber Technology T 03 829 27 40F 03 829 27 41E solutions-in-rubber@eriks.bewww.solutions-in-rubber.info
HobokenBoombekelaan 3B-2660 HobokenT 03 829 26 11F 03 828 39 59E hoboken@eriks.be
Valves | Dynamic Seals | Flange gaskets | Industrial Plastics | Industrial hoses | Instrumentation | Plastic Pipe Systems | Rubber Technology
MolNijverheidsstraat 13, Industrieterrein IIB-2400 MolT 014 34 64 34F 014 32 31 76E mol@eriks.be
Tools | Maintenance Products | Safety | Power Transmission
JumetAllée Centrale 8, Zoning IndustrielB-6040 JumetT 071 91 50 10F 071 91 50 25E jumet@eriks.be
Power Transmission | Dynamic Seals | Flange gaskets | Tools | Industrial Plastics | Industrial Hoses | Instrumentation | Plastic Pipe Systems | Maintenance Products | Rubber Technology | Safety
Service Centers
AntwerpenBoombekelaan 3B-2660 HobokenT 03 829 26 11F 03 828 39 59E antwerpen@eriks.be
BrabantBollinckxstraat 213B-1070 AnderlechtT 02 524 68 00F 02 524 69 00E brabant@eriks.be
GenkHasseltweg 308B-3600 GenkT 089 32 27 27F 089 36 31 83E genk@eriks.be
GentNieuwevaart 6B-9000 GentT 09 269 15 70F 09 234 03 90E gent@eriks.be
JumetAllée Centrale 8, Zoning IndustrielB-6040 JumetT 071 91 50 00F 071 91 50 15E jumet@eriks.be
LiègeRue du Parc 46B-4432 AlleurT 04 246 76 60F 04 384 34 18E liege@eriks.be
Luxembourg (LU)Zone Industrielle ‘UM WOELLER’ 11L-4410 SoleuvreT +352 400 605F +352 400 998E luxembourg@eriks.lu
MolNijverheidsstraat 13Industrieterrein IIB-2400 MolT 014 34 64 34F 014 32 31 76E mol@eriks.be
RoeselareOnledegoedstraat 73Industrieterrein Beveren-NoordB-8800 RoeselareT 051 25 29 00F 051 25 39 00E roeselare@eriks.be
Roncq (FR)Zone d’Activité Les Champs - B.P. 74Rue Norbert SegardF-59435 RoncqT +33 3 20 28 90 80F +33 3 20 37 65 01E roncq@baudoin-campion.fr
TurnhoutSteenweg op Gierle 271B-2300 TurnhoutT 014 41 84 16F 014 42 16 71E turnhout@eriks.be
top related