ry-60 - ez concept us · fig.2.1 fig.3.2 fig.3.1 ch.4 d ch.4 e ry-60 3 axis adjustable hinge 5...

RY-603 AXIS ADJUSTABLE HINGE 5 FULCRUMS

Hinge barrels disappear from view with Rocyork’s concealed hinges, leaving subtle clean lines around the EzyJamb.

DESCRIPTIONMake your door hinges disappear with the Rocyork concealed door hinge from EzyJamb! Some of the features and benefits of the Rocyork concealed door hinge from EzyJamb include:

• No visible barrel or pin • Maintenance free bearing mechanism • Aesthetically pleasing hinge covers

APPLICATIONThis revolutionary architectural breakthrough will allow uninterrupted clean lines around internal doors for the ultimate square-set interior.

3 axis adjustable hinge 5 fulcrums

Door Thickness Minimum 35mmAdjustments X: Horizontal +3, -2 Y: Depth ± 1 Z: Vertical ±3Capacity 60kg (2) RY-60 Hinges 76kg (3) RY-60 HingesFinishes Satin Chrome 626 Black

Information contained within this document supersedes all previous versions and is subject to change without notice A Studco Innovation

Roc

York

RY

60 D

atas

heet

EZ

_AU

_DS_

091

9

For Sales and Technical Inquiries, please contact EZ Concept AustraliaT: (03) 9737 2500 | E: sales@ezconcept.com.au | W: www.ezconcept.com.au

24mm

13mm

24mm

110

mm

110

mm

+2.5

-2.5

+1 -1

+3 -2

SP

3.5

.138

+3-2

4.6 ±

1

11.5

.453.181

+3-2

Opening 0°

Opening 180°

VERTICAL ADJUSTMENTLoosen screw “A” on all hinges. (fig. 1.1). Adjust the door hinge by turning pin “B” (fig. 1.2).Repeat the adjustment procedure on all other hinges from the top hinge to the bottom hinge, so that the door weight is evenly distributed on all door hinges. After having finished the adjustment, tighten all screws “A” (fig. 1.1).In case the panel weight is close to the maximum loading capacity, we suggest to use a wooden wedge under the panel.

HORIZONTAL ADJUSTMENTAdjust the door leaf by rotating pins “C“ (fig. 2.1 and 2.2).Repeat the adjustment procedure on all other hinges from the top hinge to the bottom hinge.

DEPTH ADJUSTMENTLoosen screw “D” (fig. 3.1). Adjust the door by turning pins “E” (fig.3.2). Repeat the adjustment procedure on all other hinges from the top hinge to the bottom hinge.After having finished the adjustment procedure proceed with the tightening of screws “D” (Fig. 3.1) on all hinges.

3 Axis of Adjustment - The hinge can be adjusted in three directions to align door margins Descriptive caption to be supplied.

ADJUSTMENT OPENING

A

CH.4

B

CH.4

C

CH.4 FIG.2.2FIG.1.2

FIG.1.1

CH.4

C

FIG.2.1

FIG.3.2

FIG.3.1

CH.4

D

CH.4

E

RY-603 AXIS ADJUSTABLE HINGE 5 FULCRUMS

Information contained within this document supersedes all previous versions and is subject to change without notice A Studco Innovation

For Sales and Technical Inquiries, please contact EZ Concept AustraliaT: (03) 9737 2500 | E: sales@ezconcept.com.au | W: www.ezconcept.com.au R

ocYo

rk R

Y60

Dat

ashe

et E

Z_A

U_D

S_0

919