ry-60 - ez concept us · fig.2.1 fig.3.2 fig.3.1 ch.4 d ch.4 e ry-60 3 axis adjustable hinge 5...
TRANSCRIPT
RY-603 AXIS ADJUSTABLE HINGE 5 FULCRUMS
Hinge barrels disappear from view with Rocyork’s concealed hinges, leaving subtle clean lines around the EzyJamb.
DESCRIPTIONMake your door hinges disappear with the Rocyork concealed door hinge from EzyJamb! Some of the features and benefits of the Rocyork concealed door hinge from EzyJamb include:
• No visible barrel or pin • Maintenance free bearing mechanism • Aesthetically pleasing hinge covers
APPLICATIONThis revolutionary architectural breakthrough will allow uninterrupted clean lines around internal doors for the ultimate square-set interior.
3 axis adjustable hinge 5 fulcrums
Door Thickness Minimum 35mmAdjustments X: Horizontal +3, -2 Y: Depth ± 1 Z: Vertical ±3Capacity 60kg (2) RY-60 Hinges 76kg (3) RY-60 HingesFinishes Satin Chrome 626 Black
Information contained within this document supersedes all previous versions and is subject to change without notice A Studco Innovation
Roc
York
RY
60 D
atas
heet
EZ
_AU
_DS_
091
9
For Sales and Technical Inquiries, please contact EZ Concept AustraliaT: (03) 9737 2500 | E: [email protected] | W: www.ezconcept.com.au
24mm
13mm
24mm
110
mm
110
mm
+2.5
-2.5
+1 -1
+3 -2
SP
3.5
.138
+3-2
4.6 ±
1
11.5
.453.181
+3-2
Opening 0°
Opening 180°
VERTICAL ADJUSTMENTLoosen screw “A” on all hinges. (fig. 1.1). Adjust the door hinge by turning pin “B” (fig. 1.2).Repeat the adjustment procedure on all other hinges from the top hinge to the bottom hinge, so that the door weight is evenly distributed on all door hinges. After having finished the adjustment, tighten all screws “A” (fig. 1.1).In case the panel weight is close to the maximum loading capacity, we suggest to use a wooden wedge under the panel.
HORIZONTAL ADJUSTMENTAdjust the door leaf by rotating pins “C“ (fig. 2.1 and 2.2).Repeat the adjustment procedure on all other hinges from the top hinge to the bottom hinge.
DEPTH ADJUSTMENTLoosen screw “D” (fig. 3.1). Adjust the door by turning pins “E” (fig.3.2). Repeat the adjustment procedure on all other hinges from the top hinge to the bottom hinge.After having finished the adjustment procedure proceed with the tightening of screws “D” (Fig. 3.1) on all hinges.
3 Axis of Adjustment - The hinge can be adjusted in three directions to align door margins Descriptive caption to be supplied.
ADJUSTMENT OPENING
A
CH.4
B
CH.4
C
CH.4 FIG.2.2FIG.1.2
FIG.1.1
CH.4
C
FIG.2.1
FIG.3.2
FIG.3.1
CH.4
D
CH.4
E
RY-603 AXIS ADJUSTABLE HINGE 5 FULCRUMS
Information contained within this document supersedes all previous versions and is subject to change without notice A Studco Innovation
For Sales and Technical Inquiries, please contact EZ Concept AustraliaT: (03) 9737 2500 | E: [email protected] | W: www.ezconcept.com.au R
ocYo
rk R
Y60
Dat
ashe
et E
Z_A
U_D
S_0
919