samson liquid ring vacuum pumps ke-series...samson liquid ring vacuum pumps ke-seriesrange: 33 mbar,...
Post on 24-Jan-2021
10 Views
Preview:
TRANSCRIPT
-
SAMSON LIQUID RING VACUUM PUMPS KE-SERIES
Range: 33 mbar, absolute to 3.5 bar, gauge
Capacity: From 150 m3/h to 320 m3/h
OFFSHORE FISHFOODTRUCKS PROCESS
DATASHEET KE-SERIES
DOC1013
-
KE SERIES
Index Page
About SAMSON PUMPS................................................................................................................... 4
Materials........................................................................................................................................... 5
Technical data................................................................................................................................... 6
Dimensions....................................................................................................................................... 7
KE180 vacuum performance ........................................................................................................... 8
KE180 pressure performance .......................................................................................................... 9
KE225 vacuum performance............................................................................................................ 10
KE225 pressure performance .......................................................................................................... 11
KE200 pressure performance (Vacuum performance only)................................................................ 12
KE300 vacuum performance (Vacuum performance only)................................................................. 13
Accessories..................................................................................................................................... 14
How to order KE.............................................................................................................................. 15
SAMSON LIQUID RING VACUUM PUMPS
-
ABOUT SAMSON PUMPS
SAMSON PUMPS was established in 1938 by the local blacksmith in a small town near Viborg, Denmark. It all started with a production of machinery and tools for local farmers.
Now with more than 40 years of experience in liquid ring vacuum pumps and vacuum technology SAMSON PUMPS has a large number of equipment installed in industries worldwide. SAMSON vacuum pumps are well known for its strength, reliablity and low maintenance costs.
Quality
All SAMSON vacuum pumps are tested before shipment from the factory.
Delivery
SAMSON PUMPS has a large amount of standard pumps on stock and we are known for our short lead time.
Service
SAMSON PUMPS has service facilities and all repaired pumps are tested to fulfill the original specifications.
Main markets
• Fish Industry
• Offshore
• Waste handling
• Food industry
• Truck building industry
SAMSON LIQUID RING VACUUM PUMPS
4
KE SERIES
-
KE SERIES
MATERIALS
Position / Components Material KE180 KE200 KE225 KE300
1: Pump housing Cast iron EN-GJL-250; EN 1561 • • • •
2: Branch pipes * Cast iron EN-GJL-250; EN1561 • • • •3: Shell Cast iron EN-GJL-250; En 1561 • • • •
4: Rotor Cast iron EN-GJS-400-15; EN 1561 — • — •
Stainless steel EN 1.4404 • — • —
5: Rotor shaft Stainless steel EN 1.4418 • • • •
6: Flow plates Cast iron EN-GJL-250; EN 1561 • • • •
Stainless steel AISI 316 • • • •
7: Mechanical shaft seal Stainless steel/NBR EN 1.4301/NBR • • • •
8: O-rings Nitrile NBR • • • •
Ethylene Proylene Diene Monomer EPDM • • • •
VITON FKM • • • •
9: Gaskets Paper gasket Oil resistant • • • •
Available = • Not available = — * = Build-in
SAMSON LIQUID RING VACUUM PUMPS
5
Doc.1622051_2
11 2
34
5
66
7
7
99
8
8
-
SAMSON LIQUID RING VACUUM PUMPS
6
TECHNICAL DATA
KE180 KE200 KE225 KE300
Weight Ex. branch pipes [kg] — — — —
Incl. branch pipes * [kg] 79 82,5 85 89,5Sound pressure [db(A)] 70 70 70 70
Pressure test [bar, gauge] 5 5 5 5
Rotation speed range [rpm] 1.200 - 1.800
Temperature Gas temp, max [°C] 120 120 120 120
ATEX, Gas temp, max [°C] — — — —
Service liquid temp, max [°C] 90 90 90 90
ATEX, service liquid temp, max [°C] — — — —
Bearing type Ball bearing, DE • • • •
Ball bearing, NDE • • • •
Roller bearing, spheric, DE — — — —
Roller bearing, spheric, NDE — — — —
Pump colour RAL code RAL 5021 • • • •
Connection, water supply Nipple hose 1/2”/Ø16 • • • •
Approvals ATEX certified Ex II2 G c T4 (zone 1) — — — —
Available = • Not available = — * = Build-in
KE SERIES
-
DIMENSIONS [mm]
Pump type A B C D E F H HB K KB L M N P
KE180 505 329 269 142 60 Ø30/k6 160 320 251 200 Ø125 Ø18 1/2” / Ø16 Ø40
KE200 505 329 269 142 60 Ø30/k6 160 320 251 200 Ø125 Ø18 1/2” / Ø16 Ø40
KE225 550 374 314 142 60 Ø30/k6 160 320 251 200 Ø125 Ø18 1/2” / Ø16 Ø40
KE300 550 374 314 142 60 Ø30/k6 160 320 251 200 Ø125 Ø18 1/2” / Ø16 Ø40
KE SERIES
SAMSON LIQUID RING VACUUM PUMPS
7
S
H
HB
KB
K
A
B
C D
E
P
F
M
L
N(Water supply)
Outlet (cw rotation)Inlet (ccw rotation)
Inlet (cw rotation)Outlet (ccw rotation)
Doc.1622051_3
-
SAMSON LIQUID RING VACUUM PUMPS
8
KE180 VACUUM PERFORMANCE - DRY AIR KE180 POWER CONSUMPTION - VACUUM
Air temperature 20°CSealing water temperature 15°CPerformance based on dry air at 1013 mbar absoluteTolerance +/- 10%
CORRECTION FACTOR BASED ONSEALING LIQUID TEMPERATURE
Qt = Q15 * KPump performance at temperature of sealing liquid higher than 15°C
1750 RPM
1450 RPM
1200 RPM
800
Q15 m/h
300
0
200 400 600 mbar absolute
3
250
200
150
100
501200 RPM
1450 RPM
1750 RPM
800
0
200 400 600
10
kW
8
2
4
6
mbar absolute
0,2
10
0,4
0,6
0,8
1,0
0
K1
100 1000
15oC
20oC
30oC
40oC
50oC Cavitation
limits
mbar abs
KE180 - Vacuum performance
VACUUM OPERATION:
Performance and power consumption are based on a constant service liquid pressure at +/- 0.2 bar gauge. Deviations will affect the performance and power consumption.Using a liquid seperator from Samson Pumps the amount of water will be regulated automatically depending on the operating pressure. At the same time the water will be reused and will reduce the costs of operation.If operating without liquid seperator, the pump must be supplied with 0.2 m3/h as a minimum in considerations to lubrication and cooling of the mechanical shaft seals.
-
SAMSON LIQUID RING VACUUM PUMPS
9
KE180 Pressure performance
KE180 Power consumption (pressure)
Air termperature 20°C, Sealing water temperature 15°CTolerance ± 10%
1750 RPM
1450 RPM
Q m/h
0
bar gauge
3
0
50
0,5 1,0 1,5
100
150
200
250
1750 RPM
1450 RPM
KW
0bar gauge0
5
0,5 1,0 1,5
10
15
KE180 - Pressure performance
PRESSURE OPERATION:
Performance and power consumption are based on a constant service liquid flow at 1.5 m3/h. Deviations will affect the performance and power consumption.Using a liquid seperator from Samson Pumps the amount of water will be regulated automatically depending on the operating pressure. At the same time the water will be re-used and will reduce the costs of operation.If operating without liquid seperator the pump must be supplied with 0.2 m3/h as a minimum in considerations to lubrication and cooling of the mechanical shaft seals.
-
SAMSON LIQUID RING VACUUM PUMPS
10
KE225 VACUUM PERFORMANCE - DRY AIR
0,2
10
0,4
0,6
0,8
1,0
0
K1
100 1000
15oC
20oC
30oC
40oC
50oC Cavitation
limits
KE225 POWER CONSUMPTION - VACUUM
Air temperature 20°CSealing water temperature 15°CPerformance based on dry air at 1013 mbar absoluteTolerance +/- 10%
CORRECTION FACTOR BASED ONSEALING LIQUID TEMPERATURE
Qt = Q15 * KPump performance at temperature of sealing liquid higher than 15°C
1750 RPM
1450 RPM
1200 RPM
800
Q15 m/h
300
0
200 400 600 mbar absolute
3
250
200
150
100
50
1200 RPM
1450 RPM
1750 RPM
800
0
200 400 600
10
kW
8
2
4
6
mbar absolute
mbar abs
KE225 - Vacuum performance
VACUUM OPERATION:
Performance and power consumption are based on a constant service liquid pressure at +/- 0.2 bar gauge. Deviations will affect the performance and power consumption.Using a liquid seperator from Samson Pumps the amount of water will be regulated automatically depending on the operating pressure. At the same time the water will be reused and will reduce the costs of operation.If operating without liquid seperator, the pump must be supplied with 0.2 m3/h as a minimum in considerations to lubrication and cooling of the mechanical shaft seals.
-
SAMSON LIQUID RING VACUUM PUMPS
11
KE225 Pressure performance
KE225 Power consumption (pressure)
Air termperature 20°C, Sealing water temperature 15°CTolerance ± 10%
1750 RPM
1450 RPM
Q m/h
0
bar gauge
3
0
50
0,5 1,0 1,5
100
150
200
250
300
1750 RPM
1450 RPM
KW
0
bar gauge0
5
0,5 1,0 1,5
10
15
20
PRESSURE OPERATION:
Performance and power consumption are based on a constant service liquid flow at 1.5 m3/h. Deviations will affect the performance and power consumption.Using a liquid seperator from Samson Pumps the amount of water will be regulated automatically depending on the operating pressure. At the same time the water will be re-used and will reduce the costs of operation.If operating without liquid seperator the pump must be supplied with 0.2 m3/h as a minimum in considerations to lubrication and cooling of the mechanical shaft seals.
KE225 - Pressure performance
-
SAMSON LIQUID RING VACUUM PUMPS
12
KE200 VACUUM PERFORMANCE - DRY AIR
KE200 POWER CONSUMPTION - VACUUM CORRECTION FACTOR BASED ONSEALING LIQUID TEMPERATURE
Air temperature 20°CSealing water temperature 15°CPerformance based on dry air at 1013 mbar absoluteTolerance +/- 10%
Qt = Q15 * KPump performance at temperature of sealing liquid higher than 15°C
60
Q15 m/h
300
0
30 40 50
3
250
200
150
100
50
1750 RPM
1450 RPM
1200 RPM
800200 400 600 mbar absolute8070 100
1200 RPM
1450 RPM
1750 RPM
800
0
200 400 600
10
kW
8
2
4
6
mbar absolute
0,2
10
0,4
0,6
0,8
1,0
0
K1
100 1000
15oC
20oC
30oC
40oC
50oC Cavitation
limits
mbar abs
KE200 - Vacuum performance
VACUUM OPERATION:
Performance and power consumption are based on a constant service liquid pressure at +/- 0.2 bar gauge. Deviations will affect the performance and power consumption.Using a liquid seperator from Samson Pumps the amount of water will be regulated automatically depending on the operating pressure. At the same time the water will be reused and will reduce the costs of operation.If operating without liquid seperator, the pump must be supplied with 0.2 m3/h as a minimum in considerations to lubrication and cooling of the mechanical shaft seals.
-
SAMSON LIQUID RING VACUUM PUMPS
13
KE300 VACUUM PERFORMANCE - DRY AIR
KE300 POWER CONSUMPTION - VACUUM CORRECTION FACTOR BASED ONSEALING LIQUID TEMPERATURE
Air temperature 20°CSealing water temperature 15°CPerformance based on dry air at 1013 mbar absoluteTolerance +/- 10%
Qt = Q15 * KPump performance at temperature of sealing liquid higher than 15°C
60
Q15 m/h
300
0
30 40 50
3
250
200
150
100
50
1750 RPM
1450 RPM
1200 RPM
800200 400 600 mbar absolute8070 100
350
1200 RPM
1450 RPM
1750 RPM
800
0
200 400 600
10
kW
8
2
4
6
mbar absolute
mbar abs
0,2
10
0,4
0,6
0,8
1,0
0
K1
100 1000
15oC
20oC
30oC
40oC
50oC Cavitation
limits
KE300 - Vacuum performance
VACUUM OPERATION:
Performance and power consumption are based on a constant service liquid pressure at +/- 0.2 bar gauge. Deviations will affect the performance and power consumption.Using a liquid seperator from Samson Pumps the amount of water will be regulated automatically depending on the operating pressure. At the same time the water will be reused and will reduce the costs of operation.If operating without liquid seperator, the pump must be supplied with 0.2 m3/h as a minimum in considerations to lubrication and cooling of the mechanical shaft seals.
-
SAMSON LIQUID RING VACUUM PUMPS
14
KE SERIES
ACCESSORIES
KE180 KE200 KE225 KE300
Non return valve — — — —
Vacuum limiter • • • •
Service liquid valve • • • •
4-way valve • • • •
4-way valve with pneumatic actuator • • • •
Intermediate pipe for 4-way valve • • • •
Adaptor for hydraulic motor ISO — — — —
Adaptor for hydraulic motor SAE — — — —
Liquid seperator • • • •
Temperature control, partiel recovery • • • •
Temperatur control, full recovery • • • •
Available = • Not available = —
-
KE SERIES
Exsample: KE 200 R 0 S S S 0 0 A SD
Model:
KE 180
KE 200
KE 225
KE 300
Rotation:
Clockwise R
Counter clockwise L
Rotor type:
Welded AISI 316 0
Cast iron EN-GJS-400-15; EN1561 1
Pump housing:
Cast iron EN-GJL-250; EN1561 S
Shell:
Cast iron EN-GJL-250; EN1561 S
Flow plates:
Cast iron EN-GJL-250; EN1561 S
Stainless steel AISI 316 E
Mechanical shaft seals:
NBR / AISI 316 0
EPDM / AISI 316 1
Teflon / AISI 316 2
Gaskets:
Oakenstrong 0
Colour:
Samson standard A
Without paint 0
On request X
Documentation:
Samson standard SD
HOW TO ORDER KE
SAMSON LIQUID RING VACUUM PUMPS
15
-
Samson Pumps A/SPetersmindevej 21 DK-8800 Viborg
Phone +45 87 50 95 70 www.samson-pumps.com
top related