selu2810c-s...pitch of the led leads and pitch of mounting holes need to be the same. recommend...
Post on 07-Jul-2020
1 Views
Preview:
TRANSCRIPT
LED Data Sheet - SELU2810C-S
SELU2810C-S● Extenal Shape Type: φ3 Round shape type LED
● Color : Amber
● Lens color : Clear
● Material of a chip : AlGaInP
● Application : Home Appliance, Office Appliance(Factory Automation),General display.
● Feature :High Intensity Type,RoHS compliant, Compatible with heat-resistance of lead-free solder.
● Absolute Maximum Ratings (Ta=25℃)
● Electro - optical characteristics (Ta=25℃)
● Luminous intensity rank (Ta=25℃) ● Dominant wavelength rank(Ta=25℃)
(Tolerance:±2nm)
Peak wavelength IF = 20mA 611
610
Spectral bandwidth nm
40
⊿λ IF = 20mA
10
400 mcd
605
~ 563
282
SANKEN ELECTRIC COMPANY, LTD.
Luminous intensity
V2.52.0
μA
375
nm
deg.
D
Dominant wavelength
E
17
605
~
nm
TYP MAX
VR
IFP
℃
Reverse current
UnitMIN
Pulse forward current
-30~100 ℃
-30~ 85
Forward current IF 30 mA
mA/℃ 25℃ or more
100 mA f=1kHz , tw≦100μs
3 V
Tstg
Forward voltage
F
-0.45
Operating temperature Topr
2θ1/2 IF = 20mA
IF = 20mAIV
Parameter Symbol Ratings Unit Remarks
Directional angle
Foward current derating ⊿IF
Reverse voltage
Storage temperature
Symbol
VF
IR
λd
Condition
IF = 20mA
VR=3V
IF = 20mA
Parameter
λp
667 ~
605
Dominant wavelength range
600 ~
range(mcd)
~ 751
C 282 Y
1001
R
RankLuminous intensity
Rank
501 ~
Page1/16
LED Data Sheet - SELU2810C-S
● Characteristic data
SANKEN ELECTRIC COMPANY, LTD.
1
10
100
1.6 1.7 1.8 1.9 2.0 2.1 2.2 2.3 2.4
IF[m
A]
VF [V]
IF-VF
0.01
0.10
1.00
10.00
1 10 100
IV(相
対値
)IF [mA]
IV-IF
IV(R
ela
tive
inte
nci
ty)
0
5
10
15
20
25
30
35
0 10 20 30 40 50 60 70 80 90
IFm
ax[m
A]
Ta [℃]
IFmax-Ta
0.0
0.2
0.4
0.6
0.8
1.0
1.2
500 600 700 800
相対
出力
λ [nm]
スペクトル特性図Spectrum
Rel
ativ
e In
ten
city
Page2/16
LED Data Sheet - SELU2810C-S
SANKEN ELECTRIC COMPANY, LTD.
0
30
60
90
100%100%
-90
-60
-30
指向特性図Directional angle
1.6
1.7
1.8
1.9
2.0
2.1
2.2
2.3
2.4
-30 -10 10 30 50 70 90
順電
圧V
F
@IF
=20m
A
周囲温度 Ta [℃]
VF-Ta
0.0
0.5
1.0
1.5
2.0
2.5
3.0
-30 -10 10 30 50 70 90
相対
光度
IV@
IF=2
0mA
周囲温度 Ta [℃]
IV-Ta
Ambient Temperature Ta[℃] Ambient Temperature Ta[℃]
VF[
V]
@IF
=20
mA
IV[R
elat
ive
inte
nci
ty]
@IF
=20
mA
Page3/16
LED Data Sheet - SELU2810C-S
● SEL2010 Series
Outline dimensions
(Unit:mm)
Terminal: ①Anode
②Cathode
Tolerance: ±0.3
Material & Finish of leads
Material of resin
SANKEN ELECTRIC COMPANY, LTD.
Finish Solder(Sn-3.0Ag-0.5Cu)
Material Epoxy
Fe + Under PlatingMaterial
Page4/16
LED Data Sheet - SELU2810C-S
● Note
Avoid applying external force, stress, and excessive vibration to the resins and terminals at
high temperature.
The glass transition temperature of epoxy resin used for the LED is approximately 120 ~ 130℃.
At a temperature exceeding this limit, the coefficient of linear expansion of the resin doubles or
more comparedto that at normal temperature and the resin is softened.
If external force or stress is applied at that time, the terminal will move and it may cause a
wire rupture.
Please be careful about the following when soldering.
After soldering, avoid applying external force, stress, and excessive vibration during cooling process
until the LEDs cool down to normal temperature.(Same for products with terminal leads)
①Soldering measurements:
Distance between melted solder side to bottom of resin shall be 5.5 mm or longer .
②Solder dip: Preheat: 90℃ max. (Backside of PCB), Within 120 seconds
Solder bath: 250℃ max. (Solder temperature), Within 5 seconds
③Soldering iron: 350℃ max. (Temperature of soldering iron tip), Within 3 seconds
When SMD components are used on the same PCB, mount the LED after adhesive baking process
since theresin used for the LED has a low heat resistance.
In case the adhesive baking is operated after the LED is mounted for a manufacturing process
reason, make surenot to apply external force, stress, and excessive vibration to the LED and follow
the conditions below.
Baking temperature: 120℃ max. Baking time: Within 60 seconds
When operating sequential soldering after the adhesive baking, perform the soldering after
the LED cools down to normal temperature.
Pitch of the LED leads and pitch of mounting holes need to be the same.
Recommend following PCB for contact mount LEDs.
Recommended PCB : Single-faced PCBs with thickness 1.6mm & holes diameter φ0.9 to 1.0mm
Do not use through holes type when using double-faced PCBs.
When doing the automatic insertion,maximize the clinch angle on the anode side
of the LED so excessive remain force won'thappen.
(Unit:mm)
SANKEN ELECTRIC COMPANY, LTD.
φ1.1
(2.54)
φ1.0
Page5/16
LED Data Sheet - SELU2810C-S
● Reliability test
Ta=RT , Ifmax
t=1000h
Hight temperature storage Ta=Tstgmax
t=1000h
Low temperature storage Ta=Tstgmin
t=1000h
Moisture Resistance Ta=60±5℃ , RH=90±5%
t=1000h
Temperature cycle Tstgmin(30min)~Tstgmax(30min)
100cycles
Soldering heat T=260±5℃ , t=10s , 1time
Solderraibirity T=245±5℃ , t=5±1s,1time
Using flux for Pb free solder
Terminal strength(pull) Loading weight 5N
t=10s
Terminal strength(bend) Loading weight 2.5N
0 → 90°→ 0
Drop H=1m ,Drop on maple board .
● Mesurement Item and Criterion Judge Failure
Forward Voltage OK≦V.F.S.×±20%
Reverse Current OK≧U.S.L.×2.0
Luminous Intensity OK≧I.V.S.×0.5
*Solderability … The Lead shall be covered by solder at least 95%.
Mesurement cnditions is based on specifications.
Tstgmax and Tstgmin is abosolute maximum ratings.
IFmax and IFPmax is absolute maximum ratings,
U.S.L. is upper limit of standard.
V.F.S. is Initial data of VF.
I.V.S. is Initial data of Luminous Intensity.
Test Items EIAJ ED-4701
303
105Tests
401
-mental
Tests
301/302
2
1
103
No
-
IR
LifeSteady state operating life
Environ
Mark Criterion Judge Failure
SANKEN ELECTRIC COMPANY, LTD.
VF
201
202
Test Conditions
3 Iv
401
Measurement Item
-
Page6/16
LED Data Sheet - SELU2810C-S
● Packing specifications
Smallest packing
Packing material : Individual vinyl bag
: 500pcs
Label : Label of below in the bag
(Unit:mm)
Label
Means Pb Free
PART NUMBER
Lot No 8 4 16 * *
① ② ③ ④
⑤
① Last digit of year
② Month
January~September→Arabic Numeral
October →O、November→N、December→D
③ Day
④ Luminous intensity rank / Chromaticity rank
⑤ Quantity(Minimum Order Quantity) :500pcs
SANKEN ELECTRIC COMPANY, LTD.
Quantity(Minimum Order Quantity)
P
160
180
SanKenSEMICONDUCTORS
サンケン電気株式会社
MADE IN JAPAN
Page7/16
LED Data Sheet - SELU2810C-S
● Taping specification for taped parts
Perforation and part number identification shall be placed as shown in the below.
As to the direction of feed, cathode shall come first.
Dimensions
(Unit:mm)
Quantity(Minimum Order Quantity)
Outline drawing
Label : Label of below in the bag
① Last digit of year
② Month
January~September→Arabic Numeral
October →O、November→N、December→D
③ Day
④ Luminous intensity rank / Chromaticity rank
⑤ Quantity(Minimum Order Quantity) :4000pcs
3.0
C
54.5A
Thickness
365
335
SANKEN ELECTRIC COMPANY, LTD.
: 4000pcs
B
Page8/16
LED Data Sheet - SELU2810C-S
● Taping specification
1.Forming type 2. Straight type
(Unit:mm)
TP7 TP8TP2
○
SANKEN ELECTRIC COMPANY, LTD.
TP1
6.0
○ ○ ○
Series
Taping name
Size H1
SELU2810C-S
7.5
Series Straight type
9.0
○
Forming type
TP6
○
5.0
TP18
23.5
SELU2810C-S × × × ×
3.5
Taping name
× ×
TP5 TP16
4.5
TP15
25.0
TP4
Size H0 17.0 20.5 20.0 19.0
TP17
TP3
Page9/16
LED Data Sheet - SELU2810C-S
● TP1 Outline dimensions
(Unit:mm)
(Po):Comulative pitch tolerance shall not exceed ±1.0mm over 20 consecutive pitches.
Terminal: ①Anode
②Cathode
Tolerance: ±0.3
SANKEN ELECTRIC COMPANY, LTD.
Comulative pitch tolerance shall not exceed ±1.0㎜ over 20
(0.3)
MAX11.0
±0.7
9.3
4.5
4.8
±0.5
φ3.1
12
±1.00
±1.0±0.512.76.35
製品倒れ
Component Alignment
±1.00
Outline dimensionsSEL2010 TP1 Series
0.45 0.4
5.0
テープ
台紙Mounting tape
Tape
+1.0
-0.5
±0.1 ±0.1(2.54)
16.0
-0.5
+1.0
MIN13.0
18.0
±0.5
±0.5
±0.53.85
9.0
12.7±0.2±0.2
φ4.0(Po)
±0.2
0.7
Tolerance一般公差:±0.3
Cathode②カソード
Terminal Anode端子接続:①アノード
consecutive pitches.
(Po):累積ピッチ誤差は、20ピッチにつき±1.0
Page10/16
LED Data Sheet - SELU2810C-S
● TP2 Outline dimensions
(Unit:mm)
(Po):Comulative pitch tolerance shall not exceed ±1.0mm over 20 consecutive pitches.
Terminal: ①Anode
②Cathode
Tolerance: ±0.3
SANKEN ELECTRIC COMPANY, LTD.
±0.7
(0.3)
SEL2010 TP2 Series
12.3±0.5
7.5
6.35
製品倒れ
Component Alignment
±1.0±0.512.7
±1.00
±1.00φ3.1
4.8
Outline dimensions
12(2.54)
5.0
±0.10.4±0.10.45
±0.2
0.7
テープ
台紙Mounting tape
Tape
+1.0-0.5
16.0
-0.5
+1.0
MIN13.0
18.0
±0.5
±0.5
±0.53.85
9.0
MAX11.0
12.7±0.2±0.2
φ4.0(Po)
Tolerance一般公差:±0.3
Cathode②カソード
Terminal Anode端子接続:①アノード
consecutive pitches.
(Po):累積ピッチ誤差は、20ピッチにつき±1.0
Comulative pitch tolerance shall not exceed ±1.0㎜ over 20
Page11/16
LED Data Sheet - SELU2810C-S
● TP3 Outline dimensions
(Unit:mm)
(Po):Comulative pitch tolerance shall not exceed ±1.0mm over 20 consecutive pitches.
Terminal: ①Anode
②Cathode
Tolerance: ±0.3
SANKEN ELECTRIC COMPANY, LTD.
φ3.8
21
±0.5 ±0.2
±0.7
0.4
(2.54)
5.0
3.85 0.45
φ3.1 0
4.8
端子接続:①アノードTerminal Anode
②カソード
一般公差:±0.3
Tolerance
Cathode
SEL2010 TP3 Series
±1.0±0.2
+1.0
±0.5
-0.5
6.0
±0.1
16.0
10.8
±0.5
製品倒れ
Component Alignment
±0.1
±0.2
0.7
0±1.0
12.76.35±0.5 ±1.0
12.7 Mounting tape台紙
テープTape
(Po) ±0.2
-0.5
+1.0
MIN13.0
18.0
±0.5
9.0
MAX11.0
φ4.0
consecutive pitches.
(Po):累積ピッチ誤差は、20ピッチにつき±1.0
Outline dimensions
Comulative pitch tolerance shall not exceed ±1.0㎜ over 20
(0.3)
Page12/16
LED Data Sheet - SELU2810C-S
● TP6 Outline dimensions
(Unit:mm)
(Po):Comulative pitch tolerance shall not exceed ±1.0mm over 20 consecutive pitches.
Terminal: ①Anode
②Cathode
Tolerance: ±0.3
SANKEN ELECTRIC COMPANY, LTD.
(0.3)
Comulative pitch tolerance shall not exceed 1.0㎜ over 20
Outline dimensionsSEL2010 TP6 Series
12
製品倒れ
Component Alignment
±1.0±0.56.35 12.7
±1.00
±1.00φ3.1
±0.5
4.8
3.5
±0.7
8.3
(2.54)
5.0
±0.10.4±0.10.45
±0.2
0.7
テープ
台紙Mounting tape
Tape
+1.0-0.5
16.0
-0.5
+1.0
MIN13.0
18.0
±0.5
±0.5
±0.53.85
9.0
MAX11.0
12.7±0.2±0.2
φ4.0(Po)
Tolerance一般公差:±0.3
Cathode②カソード
Terminal Anode端子接続:①アノード
consecutive pitches.
(Po):累積ピッチ誤差は、20ピッチにつき±1.0
Page13/16
LED Data Sheet - SELU2810C-S
● TP7 Outline dimensions
(Unit:mm)
(Po):Comulative pitch tolerance shall not exceed ±1.0mm over 20 consecutive pitches.
Terminal: ①Anode
②Cathode
Tolerance: ±0.3
SANKEN ELECTRIC COMPANY, LTD.
Outline dimensions
(Po):累積ピッチ誤差は、20ピッチにつき±1.0
consecutive pitches.
φ4.0
MAX11.0
9.0±0.5
18.0
MIN13.0
+1.0
-0.5
±0.2(Po)Tapeテープ
台紙Mounting tape12.7
±1.0±0.56.35 12.7
±1.00
0.7
±0.2
±0.1
Component Alignment
製品倒れ
±0.5 ±0.1
-0.5+1.0
±1.0
Cathode
Tolerance
一般公差:±0.3
②カソード
AnodeTerminal端子接続:①アノード
0
0.453.85
5.0
(2.54)
0.4
±0.2±0.5
12
16.0
4.8
5.0
±0.5 9.8±0.7
MAX0.3
±0.1
φ3.8±0.1
φ3.1
SEL2010 TP7 Series
Comulative pitch tolerance shall not exceed ±1.0㎜ over 20
Page14/16
LED Data Sheet - SELU2810C-S
● TP8 Outline dimensions
(Unit:mm)
(Po):Comulative pitch tolerance shall not exceed ±1.0mm over 20 consecutive pitches.
Terminal: ①Anode
②Cathode
Tolerance: ±0.3
SANKEN ELECTRIC COMPANY, LTD.
(0.3)
±1.0mm over 20 consecutive pitches.
φ3.1
2 1
φ3.8
±0.5
製品倒れComponent Alignment
±1.00
9.0
4.8
±0.7
13.8
+1.0
-0.5
16.0
±1.00
±0.2
0.7
(2.54)
0.4±0.1
Mounting tape台紙
テープTape
±0.1
±0.5 ±0.25.0
3.85 0.45±0.5
12.76.35±0.5 ±1.0
12.7(Po) ±0.2
-0.5
+1.0
MIN13.0
18.0
±0.5
9.0
MAX11.0
φ4.0
SEL2010 TP8 Series
Comulative pitch tolerance shall not exceed
(Po):累積ピッチ誤差は、20ピッチにつき±1.0端子接続:①アノードTerminal Anode
②カソード
一般公差:±0.3
Tolerance
Cathode
Outline dimensions
Page15/16
LED Data Sheet - SELU2810C-S
SANKEN ELECTRIC COMPANY, LTD.
Important Notes
●All data, illustrations, graphs, tables and any other information included in this document as to Sanken’s products listed herein (the
“Sanken Products”) are current as of the date this document is issued. All contents in this document are subject to any change
without notice due to improvement of the Sanken Products, etc. Please make sure to confirm with a Sanken sales representative that
the contents set forth in this document reflect the latest revisions before use.
●The Sanken Products are intended for use as components of electronic equipment or apparatus (transportation equipment and its
control systems, home appliances, office equipment, telecommunication equipment, measuring equipment, etc.). Prior to use of the
Sanken Products, please put your signature, or affix your name and seal, on the specification documents of the Sanken Products and
return them to Sanken. If considering use of the Sanken Products for any applications that require higher reliability (traffic signal
control systems or equipment, disaster/crime alarm systems, etc.), you must contact a Sanken sales representative to discuss the
suitability of such use and put your signature, or affix your name and seal, on the specification documents of the Sanken Products and
return them to Sanken, prior to the use of the Sanken Products. The Sanken Products are not intended for use in any applications that
require extremely high reliability such as: aerospace equipment; nuclear power control systems; and medical equipment or systems,
whose failure or malfunction may result in death or serious injury to people, i.e., medical devices in Class III or a higher class as defined
by relevant laws of Japan (collectively, the “Specific Applications”). Sanken assumes no liability or responsibility whatsoever for any
and all damages and losses that may be suffered by you, users or any third party, resulting from the use of the Sanken Products in the
Specific Applications or in manner not in compliance with the instructions set forth herein.
●In the event of using the Sanken Products by either (i) combining other products or materials therewith or (ii) physically, chemically or
otherwise processing or treating the same, you must duly consider all possible risks that may result from all such uses in advance and
proceed therewith at your own responsibility.
●Although Sanken is making efforts to enhance the quality and reliability of its products, it is impossible to completely avoid the
occurrence of any failure or defect in semiconductor products at a certain rate. You must take, at your own responsibility, preventative
measures including using a sufficient safety design and confirming safety of any equipment or systems in/for which the Sanken
Products are used, upon due consideration of a failure occurrence rate or derating, etc., in order not to cause any human injury or death,
fire accident or social harm which may result from any failure or malfunction of the Sanken Products.
●No anti-radioactive ray design has been adopted for the Sanken Products.
●Gallium arsenic is used in some of the products listed in this document. These products are dangerous if they are burned or smashed in
the process of disposal. It is also dangerous to drink the liquid or inhale the gas generated by such products when chemically disposed.
●No contents in this document can be transcribed or copied without Sanken’s prior written consent.
●The circuit constant, operation examples, circuit examples, pattern layout examples, design examples, recommended examples, all
information and evaluation results based thereon, etc., described in this document are presented for the sole purpose of reference of
use of the Sanken Products and Sanken assumes no responsibility whatsoever for any and all damages and losses that may be suffered
by you, users or any third party, or any possible infringement of any and all property rights including intellectual property rights and any
other rights of you, users or any third party, resulting from the foregoing.
●All technical information described in this document (the “Technical Information”) is presented for the sole purpose of reference
of use of the Sanken Products and no license, express, implied or otherwise, is granted hereby under any intellectual property rights or
any other rights of Sanken.
●Unless otherwise agreed in writing between Sanken and you, Sanken makes no warranty of any kind, whether express or impl ied,
including, without limitation, any warranty (i) as to the quality or performance of the Sanken Products (such as implied warranty of
merchantability, or implied warranty of fitness for a particular purpose or special environment), (ii) that any Sanken Product is delivered
free of claims of third parties by way of infringement or the like, (iii) that may arise from course of performance, course of dealing or
usage of trade, and (iv) as to any information contained in this document (including its accuracy, usefulness, or reliability).
●In the event of using the Sanken Products, you must use the same after carefully examining all applicable environmental laws and
regulations that regulate the inclusion or use of any particular controlled substances, including, but not limited to, the EU RoHS
Directive, so as to be in strict compliance with such applicable laws and regulations.
●You must not use the Sanken Products or the Technical Information for the purpose of any military applications or use, including but
not limited to the development of weapons of mass destruction. In the event of exporting the Sanken Products or the Technical
Information, or providing them for non-residents, you must comply with all applicable export control laws and regulations in each
country including the U.S. Export Administration Regulations (EAR) and the Foreign Exchange and Foreign Trade Act of Japan, and
follow the procedures required by such applicable laws and regulations.
●Sanken assumes no responsibility for any troubles, which may occur during the transportation of the Sanken Products including the
falling thereof, out of Sanken’s distribution network.
●Although Sanken has prepared this document with its due care to pursue the accuracy thereof, Sanken does not warrant that it is
error free and Sanken assumes no liability whatsoever for any and all damages and losses which may be suffered by you resulting from
any possible errors or omissions in connection with the contents included herein.
●Please refer to the relevant specification documents in relation to particular precautions when using the Sanken Products.
●All rights and title in and to any specific trademark or tradename belong to Sanken or such original right holder(s).
Page16/16
top related