shur-lok miscellaneous fasteners catalogshur-lok.eu/salesapp/product_dls/misc_fasteners.pdf ·...

Miscellaneous Fasteners CatalogShur-Lok

TABLE OF CONTENTS

GENERAL INTRODUCTION Fasteners Blind Installation 1

SL850- INSERT, BLIND THREADED, PULL-UP TYPE 2-3SL854- INSERT, THROUGH THREADED, PULL-UP TYPE 4-5SLD850- DATA - INSTALLATION PROCEDURE 6-8

SL5 - NUT, SHEAR SELF - LOCKINGSL52- NUT FLUSH - SELF - LOCKINGSL5214- INSERT SELF- LOCKING ULTRA-SONIC OR INJECTION INSTALLATIONSL5238- INSERT SELF- LOCKING ULTRA-SONIC OR INJECTION INSTALLATION

Isolator Mounts 14

SL2048 - ISOLATOR MOUNT º-TURN 15SL2049 - ISOLATOR MOUNT THREADED NON-SELF-LOCKING 16SL2054 - ISOLATOR MOUNT THREADED SELF-LOCKING 17SL2304 - ISOLATOR MOUNT º - TURN 18SL2337 - ISOLATOR MOUNT THREADED SELF-LOCKING 19SL2675 - ISOLATOR MOUNT THREADED SELF-LOCKING 20SL2751 - ISOLATOR MOUNT THREADED SELF-LOCKING 21SL8117 - ISOLATOR MOUNT INTERNAL AND EXTERNAL THREAD 22SL8120 - ISOLATOR MOUNT TANDEM THREADED SELF-LOCKING 23SL8129 - ISOLATOR MOUNT THREADED SELF-LOCKING 24SL8130 - ISOLATOR MOUNT THREADED SELF-LOCKING 25SL8132 - ISOLATOR MOUNT THREADED SELF-LOCKING 26SL2286 - STUD º TURN, QUICK-RELEASE 27

9Nuts

10111213

INTRODUCTION

MISCELLANEOUS FASTENERS

Shur-Lok provides a variety of MiscellaneousFasteners for a wide variety of applicationsThe Fasteners in this Catalog are comprisedof three categories Blind Inserts, Flush Nutsand Isolator Mounts

Further options include alloy or corrosionresistant steel and a selection of finishes as wellas dri-film lubricant Installation of both types isaccomplished by manual, semi-pneumatic orpneumatic tooling available from Shur-LokCorporation

BLIND INSERTS Example (Figure 1) SL850

Blind Inserts as the name implies, areinstalled from one side of the panel structureThis type of threaded insert is secured to thepanel structure by the combined action ofexternal knurls and the outward deformationof the thin-walled counter-bored section whenpull-up force is applied (Figure 1) Theseinserts offer the choice of protruding or flushhead styles, as well as, through or blindthreaded Thread sizes offered include 1380-32 thru 3750-24 inch threads The range ofinch thread sizes are also offered in the sameequivalent metric thread sizes M3 thru M10The inserts are offered with or without athread self-locking feature When applicablethe thread-locking torque is per MIL-DTL-25027 specification for inch threads and perNA0009 for metric threads

SL854

Example (Figure 2)

MANDREL

BUSHING GUIDE

SHUR-LOK SLT850S300HANDTOOL GUN

1

FASTENERSBLIND INSTALLATION

SL850INSERT, BLIND THREADED

PULL - UP TYPE SHEET 1 OF 2

2

FASTENERSBLIND INSTALLATION

SL850INSERT, BLIND THREADED

PULL - UP TYPE SHEET 2 OF 2

3

FASTENERSBLIND INSTALLATION

SL854INSERT, BLIND THREADED

PULL - UP TYPE SHEET 1 2OF

4

FASTENERSBLIND INSTALLATION

SL854SHEET 2 OF 2

INSERT, BLIND THREADEDPULL - UP TYPE

5

FASTENERSBLIND INSTALLATION

SLD850 DATAINSTALLATION PROCEDURE AND

INSTALLATION TOOLING SHEET 1 OF 3

6

FASTENERSBLIND INSTALLATION

INSTALLATION PROCEDURE ANDINSTALLATION TOOLING

SLD850 DATA

SHEET 2 OF 3

7

FASTENERSBLIND INSTALLATION

SLD850 DATAINSTALLATION PROCEDURE AND

INSTALLATION TOOLING SHEET 3 OF 3

8

NUTS

The Nuts featured in this section are of threestyles Flush, Shear and Injection or Ultra-Sonic Welder installation The SL5 Series isdesigned to attach two flat plate structures,where one side or both sides need to be flush,when used with 100 degree flat head boltsThread sizes range from 1380-32 UNJC thru2500-28 UNJF Thread locking torque is per

MIL-DTL-25027 Materials offered- Cresand Carbon Steel

Figure 1

The SL52 series is designed to be installed inapplications where the side opposite to boltthread entry needs to be flush with structuresurface Thread sizes range from 1640-32UNJC thru 5000-28UNJF Thread lockingtorque is per MIL-DTL-25027 Materials inthis series are offered in a wider range threetypes of Cres, Titanium Alloy and Carbonsteel

Figure 2

The SL5214 and SL 5238 are designed to beinstalled Flush to solid Plastic MaterialsMethod of installation can be accomplishedby Injection molding or by using an Ultra-Sonic welder to install into pre-formed solidplastic structures The two nuts are threadedwith 1900-32 UNJF threads Thread lockingtorque is per MIL-DTL-25027 Standardmaterial is Cres

Figure 3

See Figure 1, Figure 2 and Figure 3 forinstalled examples

9

NUT

NUT. SHEAR,SELF-LOCKING

SL5SHEET 1 OF 1

10

NUT

NUT, FLUSH.SELF-LOCKING

SL52SHEET 1 OF 1

11

NUT

SL5214INSERT, SELF-LOCKING,

ULTRA-SONIC OR INJECTION INSTALLATION SHEET 1 OF 1

12

NUT

SL5238INSERT. SELF-LOCKING,

ULTRA-SONIC INJECTION INSTALLATION SHEET 1 OF 1

13

ISOLATOR MOUNTS

Isolator mounts in this section have beenwidely used in aircraft between structuralmembers and interior trim Shur-Lok IsolatorMounts provide an effective means for thereduction of vibration noise and heat transferinto crew and passenger areas The Isolatormounts have also been found equally usefulin many other similar type applications

Typical installations are shown by ( Figure 1)internally threaded insert method of structureattachment( Figure 2 ) Quarter-turn receptacle for easeof structure removal and reinstallation.

Figure 1Internally Threaded Insert

The threaded type Isolators are provided withinch or metric threads The inch thread sizesoffered are 1640-32 and 1900-32 the metricare offered in M4 and M5 internal threads

The inch threaded Isolators are offered withexternal threads in some styles Internalthreaded Isolators can be procured withlocking or non-self-locking threads Inchinternal thread locking-torque is perMIL-DTL-25027 Isolators are also offeredwith non-threaded receptacle to be used withQuarter-turn stud for quick installation andremoval Isolators with Quarter-turnreceptacle are used where the structures areoften removed and reinstalled

Figure 2Quarter-Turn Receptacle

14

ISOLATOR MOUNT

ISOLATOR MOUNT,1/4-TURN

SL2048SHEET 1 OF 1

15

ISOLATOR MOUNT

ISOLATOR MOUNT, THREADED,NON SELF - LOCKING

SL2049SHEET 1 OF 1

16

ISOLATOR MOUNT

ISOLATOR MOUNT, THREADED,SELF - LOCKING

SL2054SHEET 1 OF 1

17

ISOLATOR MOUNT

SL2304ISOLATOR MOUNT,

1/4 - TURN SHEET 1 OF 1

18

ISOLATOR MOUNT

ISOLATOR MOUNT, THREADED,SELF - LOCKING

SL2337SHEET 1 OF 1

19

ISOLATOR MOUNT

ISOLATOR MOUNT, THREADED,SELF-LOCKING

SL2675SHEET 1 OF 1

20

ISOLATOR MOUNT

ISOLATOR MOUNT, THREADED,LIGHTWEIGHT

SL2751SHEET 1 OF 1

21

ISOLATOR MOUNT

SL8117ISOLATOR MOUNT,

INTERNAL AND EXTERNAL THREAD SHEET 1 OF 1

22

ISOLATOR MOUNT

ISOLATOR MOUNT, TANDEM,THREADED. SELF - LOCKING

SL8120-3SHEET 1 OF 1

23

ISOLATOR MOUNT

ISOLATOR MOUNT, THREADEDSELF - LOCKING

SL8129SHEET 1 OF 1

24

ISOLATOR MOUNT

SL8130ISOLATOR MOUNT, THREADED,

SELF - LOCKING SHEET 1 OF 1

25

ISOLATOR MOUNT

SL8132ISOLATOR MOUNT, THREADED,

SELF - LOCKING SHEET 1 OF 1

26

ISOLATOR MOUNT

STUD, 1/4 TURN,QUICK RELEASE

SL2286SHEET 1 OF 2

27

ISOLATOR MOUNT

STUD, 1/4 TURN,QUICK RELEASE

SL2286SHEET 2 OF 2

28