sx-10 catalog engsx series 2530 4750 1 8 8 0 3 2 0 0 figures on the basis hino “xzu600r” 0 5 10...

Post on 15-Feb-2021

3 Views

Category:

Documents

0 Downloads

Preview:

Click to see full reader

TRANSCRIPT

  • Boom when extended to the fullest is able to rotate fully without restriction. Even during vertical lift movement the vehicle is stable and no tilting concerns. The vehicle is operatable within 8.2m radius, platform can load up to 200kg. In addition, when the lower outrigger is not set up properly, the upper half is designed with safety features that it will not be operatable.

    SX-10

    The vehicle uses no computer programming control and therefore increases its usage, it uses high durability parts, letting customers have the confidence of long term vehicle life. And it is friendly for human and environments.

    Aerial work platform

    SX-10 Innovative Features

    http://www.tokyosharyo.com

    Simultaneous controlled three section telescopic boomThe simultaneous controlled telescopic boom can access working position more easily than an articulated boom type does.

    Compact swing tableWhen the compact swing table rotes, it does not protrude outward from the chassis frame.

    No automatic stop by computerThe working range is regulated by the physical capability of optimally-designed boom in itself.Vision-based operation is available. There is no more worry for being disturbed by frequent automatic stop by computer.

    Direct access to the basketThe working basket can be moved to the ground level. Direct access to the basket from the ground makes it easy to load and unload items.

    Vertical supportSpace-saving vertical jack up system makes it possible to operate in the narrow workspace.

    Energy hoses are located inside the boom system to be protected from damage and defacement.

    Computer-free structureElectric troubles are prevented due to the scheme of minimizing employment of electric parts. None of devices are regulated by computer.They are free from readjustment by program.

    Preventive setup of inadvertent operationThe boom cannot be operated unless the jacks are up.Likewise, the jacks cannot be operated while the boom is working.

    SAFTY ECONOMY

    The SX-10 can meet increasingly stringent 

    environmental requirements and high safety standers. 

    Internally routed hoses

    Max.heightfrom ground :

    Max.workradius :

    9.7m

    8.2m

    SX series

  • 25304750

    1880

    3200

    Figures on the basis HINO “XZU600R”

    0 5 10

    0

    5

    10

    (m)

    (m)

    SX10 Working RadiusMaximum load capacity : 200kg or 2 persons

    The diagram based on the cnditions :-- Ground : firm and level-- Wind speed : not over 16m/s-- Boom deflection : unconsidered

    TOKYO SHARYO CO., LTD.1356 Menuma, Kumagaya, Saitama, 3600201, JapanTEL : +81-48-580-6952 FAX : +81-48-580-6953 http://www.tokyosharyo.com

    8.2m

    9.7m

    ■ Name / Model

    Aerial Work Platform with 3 Section Telescopic BoomName

    SX-10Model

    Max.height from ground

    ■ Basket

    Swing angle Left 90degrees - Right 95 degreesv

    0.7m×1.0m×1.0mLength×Width×Height

    200kg or 2 personsMax.load capacity

    Max.work radius

    Length

    ■ Boom

    360 degreesRotating angle

    -20 degrees to 80 degreesElevating angle

    3.67m - 7.92m

    ■ Jack

    1.78mJack outreach

    ■ Control speed

    6.1sec/185 degreesBasket swing

    1.0rpmBoom rotation

    15sec/strokeDown

    20sec/strokeUpBoom extension

    30sec/strokeDown

    30sec/strokeUpBoom elevation

    ■ Working pressure

    17.2MPaWorking pressure

    Specifications SX-10

top related