this symbol is used to; start a flow-chart; stop a singe flow-chart (or all flow charts in that...

This symbol is used to;

Start a flow-chart;

Stop a singe flow-chart (or all flow charts in that program);

Mark the Start of a Sub-Routine (a separate flow-chart that only starts when it is told to).

This symbol is used to;

Delay an action in a flow-chart;

Signal the start of a Sub-Routine;

Let a certain letter (a-z) equal a number.

This symbol is used to;

Turn an Output on/off;

Turn a Motor forwards/backwards;

Play a sound;

Speak a certain text.

This symbol is used to;

Ask if an input is on or off, then take 1 of 2 choices;

Ask if a Val is equal/more/less to a certain number, then take 1 of 2 choices;

Ask if a variable is equal/more/less to a certain number, then take 1 of 2 choices;

Ask if a Margin is equal/more/less to a certain number, then take 1 of 2 choices.

Chart Starts

Lights on

A delay

A decision

A sub routine trigger

A sub routine start

This chart (from left). Lights on/off and emergence stop if left button is on.

Either a ride trigger (2 min) or unload the wheel.

At bottom (middle) the sub-routine that turns the wheel for two minutes, then

goes back to the previous routine.

On right the subroutine that unloads the 7 pods on the wheel, then goes

back the second sub-routine.

Bottom left the emergency stop with a voice saying ‘’emergency stop in

progress’’.

Making a simple flow chart:5 easy steps.

STEP 1Open Flowol 3 and choose a mimic by pressing the little lighthouse symbol.

STEP 2Place start block(s) for the beginning of your flowchart.

STEP 3Choose either a decision (diamond), command (parallelogram) or a process (square) for the flow chart to execute.

STEP 4Using the arrow tool, click on the start block, and then on the block that you want to happen next.

STEP 5Place an end block for the end of your flowchart. OR repeat step 3 and 4 until you have achieved the desired result.