titanium, tantalum equipments for hcl regeneration and reuse in arp

7/27/2019 Titanium, Tantalum Equipments for HCL Regeneration and Reuse in ARP

1/29

TITANIUM Gr.7 & TANTALUM Equipments forSTEEL PROCESSING industries.


2/29

Acid (HCL) Heating in pickling bath

Titanium Gr.7 (Ti-

Pd. alloy) ARP

Equipments for

recovery and

reuse of HCL

Traditionally, steel plants are using PTFE

immersion coils and direct steam spargers to

heat HCL in pickling baths. Due to the

continuous maintenance of the coils andspargers, there is a permanent

environmental impact. Using the custom

designed in-tank TANTALUM immersion

coils for the indirect steam heating in

pickling bath is the alternative cost effectivesolution. Tiaano, India use their extensive

experience and design the most innovative

and efficient immersion coils.

Tantalum Heat Exchanger Coils for HCL

heating in Pickling Baths.

Tantalum Heat

Exchanger

Coils for HCL

heating in

Pickling Baths


3/29


Titanium Gr.7 (Ti-

Pd. alloy) ARP

Equipments for

recovery and

reuse of HCL

Tantalum U shaped, Grid, Serpentine & custom designedimmersion heat exchanger Coils are in our scope,

Offers...

Complete / Superior Corrosion resistance.

High heat transfer characteristics & steam pressure

capabilities than non-metallic PTFE coilsreduce

required surface area.

Cost comparative to PTFE coils.

Seam welded metal design eliminates breakage

during handling, Installation & Operation.

Easily retrofittable into existing equipment footprint. Elimination of HCL leakages into steam condensate.

No spare parts to keep in inventory.

Elimination of down time due to equipment failure.

Tantalum Heat

Exchanger

Coils for HCL

heating

Pickling Baths


4/29


Tantalum Heat

Exchanger

Coils for HCL

heating

Pickling Baths

Titanium Gr.7 (Ti-

Pd. alloy) ARP

Equipments for

recovery and

reuse of HCL


5/29

Tantalum Shell and Tube Heat Exchangers for

HCL heating in Pickling Baths

Its extensive inert & heat transfer properties,TANTALUM shell & tube heat exchanger is having vitalrole in hydrochloric acid heating at high turbulenceshallow tank pickling bath. Traditionally Carbon

block heat exchangers are getting used, its fragilenature and multi-gasket construction requirescontinuous maintenance and repair work whichresults expensive spare parts and downtime.

Alternative to Carbon heat exchangers, Tiaano offersa full line of standard and custom-made Tantalumshell & tube heat exchangers for the indirect steamheating in picking bath operations.

Tantalum HeatExchanger

Coils for HCL

heating in

Pickling Baths

Titanium Gr.7 (Ti-

Pd. alloy) ARP

Equipments for

recovery and

reuse of HCL



6/29

Business template


Coils for HCL

heating in

Pickling Baths

Titanium Gr.7 (Ti-

Pd. alloy) ARP

Equipments for

recovery and

reuse of HCL


Tantalum Shell and Tube Heat Exchangers

for HCL heating in Pickling BathsOffers...

Complete / Superior Corrosion resistance. Better / High heat transfer characteristics. Cost comparative to Carbon Block Heat Exchangers.

Higher steam pressure capabilities than carbon block- reduce the required surface area.

Seam welded metal design eliminates fragile nature,breakage during handling,Installation & Operation.

Easily retrofittable into existing equipment footprint.

Elimination of HCL acid leakages into steamcondensate.

No spare parts to keep in inventory.

Elimination of down time due to equipment failure.


7/29

Business template


Coils for HCL

heating in

Pickling Baths

Titanium Gr.7 (Ti-

Pd. alloy) ARP

Equipments for

recovery and

reuse of HCL



8/29

HCL Regeneration (Line Specification)


9/29

HCL Regeneration

THE TANK FARM & SUMP


10/29

HCL Regeneration Equipments


Coils for HCL

heating in

Pickling Baths

Tantalum Shell

and Tube Heat

Exchangers

for HCL

heating in

Pickling Baths

Titanium Gr.7 (Ti-

Pd. alloy) ARP

Equipments for

recovery and

reuse of HCL

Titanium Gr.7 (Ti-Pd. alloy) Acid Regeneration Plant

(ARP) equipments for recovery and reuse of HCL

Tiaano, offers Titanium Gr.7 (ti-pd alloy) equipments forPollution abatement cum Hydrochloric Acidregeneration plants for the recovery and reuse of Acid.They are

Ti-Pd. (Titanium Gr.7) Venturi F5. Ti-Pd. (Titanium Gr.7) Blowers V 31. Ti-Pd. (Titanium Gr.7) Impellers V31. Ti-Pd. (Titanium Gr.7) Fasteners.

Ti-Pd. (Titanium Gr.7) Acid Lance P2. Ti-Pd. (Titanium Gr.7) Column Pipes A6. Ti-Pd. (Titanium Gr.7) Diffuser Pipe bends A6. Ti-Pd. Sleeved EPDM Bellows for V 31, A-10, A6 etc.


11/29



Coils for HCL

heating in

Pickling Baths

Tantalum Shell

and Tube Heat

Exchangers

for HCL

heating in

Pickling Baths

Titanium Gr.7 (Ti-

Pd. alloy) ARP

Equipments for

recovery and

reuse of HCL

The hydrochloric acid used in the pickling process is

thermally treated in the acid regeneration plant for thepurpose of recovery and reuse. The plant is divided intothe following sections:

The rector in which the iron chloride is transformed

into iron oxide and gaseous HCl.

The venturi, in which the hot gases are cooled downfrom 850C to100C approx. During this process, thepickling acid is strongly concentrated due to

evaporation of water.

The separator in which the waste gases coming fromthe venturi liquid.


12/29



Coils for HCL

heating in

Pickling Baths

Tantalum Shell

and Tube Heat

Exchangers

for HCL

heating in

Pickling Baths

Titanium Gr.7 (Ti-

Pd. alloy) ARP

Equipments for

recovery and

reuse of HCL

The absorber in which the hydrochloric acid is recovered by

absorption of the gaseous HCl in water.

The fan F-V-31 with the fume stake which sucks of the gasesdeveloped in the reactor and keeps the entire system belowatmospheric pressure. The residual inert gases are led throughthe fume stake into the atmosphere.

The venture F25 with separator B26 in which a final treatmentof the waste gas is achieved.

The chemical reaction during the pickling process can beillustrated with the following reaction equation: Fe2O3 + 6HCl

= 2FeCl3 + 3H2O FeO + 2HCl = FeCl2 + H2O 2FeCl3 + H2 = 2FeCl2 +2HCl3.


13/29



Coils for HCL

heating in

Pickling Baths

Tantalum Shell

and Tube Heat

Exchangers

for HCL

heating in

Pickling Baths

Titanium Gr.7 (Ti-

Pd. alloy) ARP

Equipments for

recovery and

reuse of HCL


14/29

(Our Drawings For Steel Pickling Equipments)


15/29



16/29



17/29



18/29



19/29



20/29



21/29

HCL Re (Our Drawings For Steel Pickling Equipments)


22/29

HCL Regeneration(Our Drawings For Steel Pickling Equipments)


23/29



24/29



25/29



26/29



27/29



28/29



29/29

OUR VALUABLE REPLICATED CLIENTS

M/s. UTTAM GALVA STEELS LTD., INDIA.

M/s. JSW ISPAT STEEL LIMITED, INDIA.

M/s. LLOYDS STEEL INDUSTRIES LTD., INDIA.

M/s. STEEL AUTHORITY OF INDIA LTD., INDIA.

M/s. TATA IRON & STEEL CO. LTD., INDIA.

M/s. NEWTECH INTERNATIONAL WLL, BAHRAIN.

M/S. VJIKKS ENGG POWER (M) SDN BHD.,

MALAYSIA.

titanium, tantalum equipments for hcl regeneration and reuse in arp

Documents

varnost internetne (voip) telefonije · • address...

tantalum 19-8.qxp 66716 tantalum - avx...

recycle tantalum

tantalum through-hole ceramic surface mount tantalum...

tantalum surface mount capacitors – standard tantalum...

tantalum surface mount capacitors – standard tantalum t490...

address resolution protocol(arp) by:protogenius. overview...

arp receive arp packet structures arp packets...

tantalum - unige.ch

tantalum surface mount capacitors – standard … ·...

investigation of liberation technology for tantalum recovery...

tantalum-niobium international study...

wet tantalum capacitors

arp commands - cisco.com · arp purge-delay...

risk assessment of the availability of tantalum and...

tantalum capacitor datasheet(.. - west florida … ·...

arp le protocole arp

surface mount tantalum capacitors - university of...

tantalum surface mount capacitors – standard tantalum t491...

electronic supplementary material evolution reaction ... ·...