tuesday, june 2, oral presentations - energy.gov · 2020-04-14 · venkat srinivasan, anl bat393:...

Time Advanced Combustion Engines (ACE) Technology Integration (TI)

1:00 PM

1:15 PM

1:30 PM

1:45 PM

2:00 PM

2:15 PM

TI920: Technology Integration (TI) Project Overview

Mark Smith, DOE

TI091: Solutions for Curbside-Charging Electric Vehicles Planned for Urban

Growth

Robert Cox, University of North Carolina at Charlotte

TI092: Multi-Unit Dwelling Plug-In Electric Vehicle Charging Innovation

Pilots in Multiple Metropolitan Areas

Kevin Wood, Center for Sustainable Energy

TI093: Electric Vehicle Supply Equipment (EVSE) Innovation: Streetlight

Charging in City Right-Of-Way

Miriam Bouallegue, Metropolitan Energy Center

TI094: Advanced Transportation Hub Efficiency using Novel Analysis

(ATHENA)

Caleb Phillips, NREL

TI095: High-Performance Computing (HPC) for O'Hare Hub

Aymeric Rousseau, ANL

TI096: Technology Integration to Gain Commercial Efficiency for the Urban

Goods Delivery System

Anne Goodchild, University of Washington

TI097: Drones, Delivery Robots, Driverless Cars, and Intelligent Curbs for

Increasing Energy Productivity of First-/Last-Mile Goods Movement

Agreement

Constantine Samaras, Carnegie Mellon University

ACE138: Partnership for Advanced Combustion Engines (PACE) - A Light-

Duty National Laboratory Combustion Consortium

Paul Miles, SNL

ACE139: Development of an Optimized Gasoline Surrogate Formulation for

PACE Experiments and Simulations

Scott Wagnon, LLNL

ACE140: Improved Chemical Kinetics and Algorithms for More Accurate,

Faster Simulations

Russell Whitesides, LLNL

Tuesday, June 2, Oral Presentations

ACE141: Advanced Ignition System Fundamentals

Isaac Ekoto, SNL

ACE142: Development and Validation of Simulation Tools for Advanced

Ignition Systems

Riccardo Scarcelli, ANL

Lunch Break

ACE143: Fuel Injection and Spray Research

Chris Powell, ANL

ACE144: Spray Wall Interactions and Soot Formation

Lyle Pickett, SNL

ACE146: Direct Numerical Simulation (DNS) and High-Fidelity Large-Eddy

Simulation (LES) for Improved Prediction of In-Cylinder Flow and

Combustion Processes

Muhsin Ameen, ANL

2:30 PM

3:00 PM

3:15 PM

3:30 PM

3:45 PM

4:00 PM

4:15 PM

4:30 PM

5:00 PM

5:15 PM

5:30 PM

ACE150: Enabling Low-Temperature Plasma (LTP) Ignition Technologies for

Multi-Mode Engines through the Development of a Validated High-Fidelity

LTP Model for Predictive Simulation Tools

Nick Tsolas, Auburn University

5:45 PM

ACE151: Hierarchically Informed Engineering Models for Predictive

Modeling of Turbulent Premixed Flame Propagation in Pre-Chamber

Turbulent Jet Ignition

Haifend Wang, Purdue University

6:00 PM

ACE152: Development of High-Fidelity and Efficient Modeling Capabilities

for Enabling Co-Optimization of Fuels and Multi-Mode Engines

Matthiaas Ihme, Stanford University

6:15 PM

6:30 PM

6:45 PM

ACE145: More Accurate Modeling of Heat Transfer in Internal Combustion

Engines

K. Dean Edwards, ORNL

TI098: Transportation Energy Analytics Dashboard (TEAD)

Michael Park, University of Maryland

TI099: Understanding and Improving Energy Efficiency of Regional Mobility

Systems by Leveraging System-Level Data

Zhen (Sean) Qian, Carnegie Mellon University

TI100: High-Dimensional, Data-Driven Energy Optimization for Multi-Modal

Transit Agencies

Philip Pugliese, Chattanooga Area Regional Transit Authority

TI101: Mobility and Energy Improvements Realized through Prediction-

Based Vehicle Powertrain Control and Traffic Management

Thomas Bradley, Colorado State University

ACE147: Mitigation of Knock and Low-Speed Pre-Ignition (LSPI) for High-

Power Density Engines

Jim Szybist, ORNL

ACE148: Overcoming Barriers for Dilute Combustion

Brian Kaul, ORNL

ACE149: Cold-Start Physics and Chemistry in Combustion Systems for

Emissions Reduction

Scott Curran, ORNL

TI103: Fuel-Efficient Platooning in Mixed Traffic Highway Environments

Jeff Rupp, American Center for Mobility

TI102: Advancing Platooning with Advanced Driver-Assistance Systems

Control Integration and Assessment

Hoseinali Borhan, Cummins

1:00 PM

1:15 PM

1:30 PM

1:45 PM

2:00 PM

2:15 PM

Vehicle Technologies Analysis (VAN) Electrification Technologies (ELT)

ELT209: High-Voltage, High-Power Density Traction-Drive Inverter

Gui-Jia Su, ORNL

ELT211: Power Electronics Thermal Management

Gilbert Moreno, NREL

ELT089: Assessing the North American Supply Chain for Traction-Drive

Inverters, Motors, and Batteries for Class 3-8 Hybrid Electric and Plug-In

Electric Commercial Vehicles

Chris Whaling, Synthesis Partners

ELT208: Highly Integrated Power Module

Emre Gurpinar, ORNL

ELT210: Development of Next-Generation Vertical Gallium-Nitride Devices

for High-Power Density Electric Drivetrain

Greg Pickrell, SNL

ELT212: Non-Heavy Rare-Earth High-Speed Motors

Tsarafidy Raminosoa, ORNL

ELT213: High-Fidelity Multiphysics Material Models for Electric Motors

Jason Pries, ORNL

Lunch Break

2:30 PM

3:00 PM

3:15 PM

3:30 PM

3:45 PM

4:00 PM

4:15 PM

4:30 PM

5:00 PM

5:15 PM

5:30 PM

5:45 PM

6:00 PM

6:15 PM

6:30 PM

6:45 PM

Vehicle Technologies Analysis (VAN) Electrification Technologies (ELT)

VAN032: Tracking the Evolution of Electric Vehicles and New Mobility

Technology

Joann (Yan) Zhou, ANL

VAN033: Transportation Macroeconomic Accounting Models: VISION and

Non-Light Duty Energy and Greenhouse Gas (GHG) Emissions Accounting

Tool (NEAT)

Joann (Yan) Zhou, ANL

Panel Discussion

ELT214: Electric Motor Thermal Management

Kevin Bennion, NREL

VAN920: Overview of VTO Analysis Program

Jacob Ward, DOE

VAN016: Transportation Data Program

Stacy Davis, ORNL

ELT215: Permanent Magnets without Critical Rare Earths to Enable Electric

Drive Motors with Exceptional Power Density

Iver Anderson, Ames Laboratory

VAN017: ANL VTO Analysis Modeling Program

Michael Wang, ANL

VAN023: Assessing Energy and Cost Impact of Advanced Vehicle

Technologies

VAN018: Light-Duty Vehicle Choice Modeling and Benefits Analysis

Aaron Brooker, NREL

ELT216: Isotropic, Bottom-Up Soft Magnetic Composites for Rotating

Machines

Todd Monson, SNL

Time Vehicle Technologies Analysis (VAN) Electrification Technologies (ELT)

1:00 PM

1:15 PM

1:30 PM

1:45 PM

2:00 PM

2:15 PM

Materials Technology (MAT) Battery R&D (BAT) Energy-Efficient Mobility Systems (EEMS)

BAT343: Silicon and Intermetallic Anode Portfolio

Strategy Overview

Brian Cunningham, DOE

MAT166: Aluminum Purification and Magnesium

Recovery from Magnesium-Aluminum Scrap

John Hryn, ANL

MAT150: Low-Cost Corrosion Protection for

Magnesium

Aashish Rohatgi, PNNL

MAT158: Overcoming the Barriers to

Lightweighting by Enabling Low-Cost and High-

Performance Structural Automotive Aluminum

Castings

MAT126: Room-Temperature Stamping of High-

Strength Aluminum Alloys

MAT142: Metal-Matrix Composite Brakes Using

Titanium Diboride

Glenn Grant, PNNL

MAT134: Assembly of Dissimilar Aluminum Alloys

for Automotive Applications

Piyush Upadhyay, PNNL

EEMS013: ANL Core Tools--Simulation

EEMS041: ANL Core Tools--Hardware

Kevin Stutenberg, ANL

EEMS067: Virtual and Physical Proving Ground for

Development and Validation of Future Mobility

Technologies

Dean Deter, ORNL

EEMS066: Livewire Data Platform--A Solution for

Energy Efficient Mobility Systems (EEMS) Data

Sharing

Lauren Spath Luhring, NREL

EEMS069: Next-Generation Intelligent Traffic

Signal for Multimodal, Shared, and Automated

Future

Andrew Powch, Xtelligent

BAT436: Silicon Electrolyte Interface Stabilization

(SEISTA): Update and Overview

Tony Burrell, NREL

(SEISTA): Electrochemical Methods

Robert Kostecki, LBNL

(SEISTA): Advanced Characterization

Glen Teeter, NREL

MAT127: U.S. Automotive Materials Partnership

Low-Cost Magnesium Sheet Component

Development and Demonstration Project

Randy Gerken, Fiat Chrysler Automotive

MAT149: Non-Rare Earth Magnesium Bumper

Scott Whalen, PNNL

EEMS061: Real-Time Data and Simulation for

Optimizing Regional Mobility in the United States

Jibonananda Sanyal, ORNL

EEMS037: High-Performance Computing (HPC)

and Big Data Solutions for Mobility Design and

Planning

Jane MacFarlane, LBNL

EEMS062: Deep-Learning for Connected and

Automated Vehicle (CAV) Development

Robert Patton, ORNL

BAT388: Silicon Deep Dive: Update and Overview

Jack Vaughey, ANL

BAT439: Silicon Deep Dive: Silicon-Based Slurries

and Electrodes

Beth Armstrong, ORNL

BAT440: Silicon Deep Dive: Silicon

Functionalization

Zhengcheng Zhang, ANL

Silicon Electrolyte Interface Stabilization (SEISTA):

Roundtable - Question & Answer

Lunch Break

2:30 PM

3:00 PM

3:15 PM

3:30 PM

3:45 PM

4:00 PM

4:15 PM

4:30 PM

5:00 PM

5:15 PM

5:30 PM

5:45 PM

6:00 PM

6:15 PM

6:30 PM

6:45 PM

BAT394: Highly Ordered Hierarchical Anodes for

Extreme Fast-Charging Batteries

Neil Dasgupta, University of Michigan

EEMS084: Energy-Efficient Maneuvering of

connected and Automated Vehicles (CAVs) with

Situational Awareness at Intersections

Sankar Rengarajan, Southwest Research Institute

EEMS085: Overview of Key Insights from SMART

Mobility 1.0

David Anderson, DOE

EEMS083: CIRCLES:Congestion Impact Reduction

via CAV-in-the-loop Lagrangian Energy Smoothing

Alexandre Bayen, University of California at

Berkeley

BAT392: Enabling Rapid Charging in Lithium-Ion

Batteries via Integrated Acoustofluidics

James Friend, University of California at San Diego

EEMS028: Developing an Eco-Cooperative

Automated Control System (Eco-CAC)

Hesham Rakha, Virginia Tech

EEMS082: Validation of Connected and

Automated Mobility System Modeling and

Simulation

Jeffrey Rupp, American Center for Mobility

MAT167: Corrosion Mechanisms in Magnesium-

Steel Dissimilar Joints

Vineet Joshi, PNNL

MAT136: High-Performance Computing and High-

Throughput Characterizations toward Interfaces-

by-Design for Dissimilar Materials Joining

Xin Sun, ORNL

MAT137: Adhesive Bonding of Carbon-Reinforced

Plastic to Advanced High-Strength Steel

Zhili Feng, ORNL

BAT386: Extreme Fast Charge Cell Evaluation of

Lithium-Ion (XCEL) Batteries

Venkat Srinivasan, ANL

BAT393: Development of an Extreme Fast-

Charging Battery

Chao-Yang Wang, Penn State University

MAT139: Mechanical Joining of Thermoplastic

Carbon-Fiber Reinforced Polymer to Die-Cast

Magnesium

Keerti Kappagantula, PNNL

MAT138: Solid-State Joining of Magnesium Sheet

to High-Strength Steel

Piyush Upadhyay, PNNL

Silicon Deep Dive: Roundtable - Question &

Answer

MAT151: Phase-Field Modeling of Corrosion for

Design of Next-Generation Magnesium-Aluminum

Vehicle Joints

Adam Powell, Worcester Polytechnic Institute

Time Materials Technology (MAT) Battery R&D (BAT) Energy-Efficient Mobility Systems (EEMS)

TI104: Using Real-Time Mass Transit in First-/Last-Mile Solution

Crystal Wang, Ford

TI105: Multi-Modal, Energy-Optimal Trip Scheduling in Real-Time (METS-R)

for Transportation Hubs

Satish Ukkusuri, Purdue University

1:00 PM

1:15 PM

1:30 PM

1:45 PM

2:00 PM

Wednesday, June 3, Oral Presentations

ACE119: Development and Optimization of a Multi-Functional SCR-DPF

(Diesel Particulate Filter) Aftertreatment System for Heavy-Duty NOx and

Soot Emission Reduction

Ken Rappe, PNNL

ACE118: CLEERS Passive NOx Adsorber (PNA)

Janos Szanyi, PNNL

ACE027: Next-Generation Selective Catalytic Reduction (SCR)-Dosing

System Investigation

Abhijeet Karkamkar, PNNL

ACE022: Joint Development and Coordination of Emissions Control Data

and Models (Cross-cut Lean Exhaust Emissions Reduction Simulations

(CLEERS) Analysis and Coordination)

Josh Pihl, ORNL

ACE023: CLEERS: Fundamentals in Selective Catalytic Reduction (SCR),

Filter, and Protocol

Yong Wang, PNNL

ACE085: Low-Temperature Emission Control to Enable Fuel-Efficient Engine

Commercialization

Todd Toops, ORNL

ACE033: Emission Control for Lean Gasoline Engines

Vitaly Prikhodko, ORNL

ACE153: Chemistry of Cold-Start Emissions and Impact of Emissions Control

Melanie Moses DeBusk, ORNL

Lunch Break

2:15 PM

2:30 PM

3:00 PM

3:15 PM

3:30 PM

3:45 PM

4:00 PM

4:15 PM

4:30 PM

5:00 PM

5:15 PM

5:30 PM

5:45 PM

6:00 PM

6:15 PM

6:30 PM

ACE130: Development of Passive Hydrocarbon/NOx Trap Catalysts for Low-

Temperature Gasoline Applications

Mark Crocker, University of Kentucky

ACE129: Design and Optimization of Structured Multi-Functional Trapping

Catalysts for Conversion of Hydrocarbons and NOx from Diesel and

Advanced Combustion Engines

Michael Harold, University of Houston

ACE119: Development and Optimization of a Multi-Functional SCR-DPF

(Diesel Particulate Filter) Aftertreatment System for Heavy-Duty NOx and

Soot Emission Reduction

Ken Rappe, PNNL

ACE056: Low-Temperature Oxidation

Yong Wang, PNNL

ACE032: Cummins-ORNL Emissions Cooperative Research and

Development Agreement (CRADA): NOx Control and Measurement

Technology for Heavy-Duty Diesel Engines, Self-Diagnosing SmartCatalyst

Systems

Bill Partridge, ORNL

ACE128: Reduced Precious Metal Catalysts for Methane and NOx Emission

Control of Natural Gas Vehicles

Michael Harold, University of Houston

6:45 PM

1:00 PM

1:15 PM

1:30 PM

1:45 PM

2:00 PM

Fuel and Lubricant Technologies (FT) Electrification Technologies (ELT)

ELT202: Charging Infrastructure Technologies: Smart Electric Vehicle

Charging for a Reliable and Resilient Grid (RECHARGE)

Andrew Meintz, NREL

ELT201: Charging Infrastructure Technologies: Smart Vehicle-Grid

Integration--ANL

Keith Hardy, ANL

ELT200: Scalable Electric Vehicle Smart Charging Using Collaborative

Autonomy

Steve Chapin, LLNL

ELT091: Cost-Effective 6.5% Silicon Steel Laminate for Electric Machines

Jun Cui, Iowa State University

FT071: Multi-Mode Operation in Gasoline Direct-Injection Engines: Fuel-

Property Effects and Approaches to Expand the Advanced Compression-

Ignition Range

Toby Rockstroh, ANL

FT072: Multi-Mode: Desired Fuel Properties for Advanced Compression-

Ignition and Spark-Ignition Engine Performance

Chris Kolodziej, ANL

FT073: Co-Optima Emissions and Emissions Control for Spark Ignition and

Advanced Compression Ignition Multi-Mode Combustion

Sreshtha Sinha Majumdar, ORNL

FT067: Multi-Mode/Multi-Mode Compression Ignition : Fuel-Property

Characterization and Prediction

Tim Bays, PNNL

FT088: Fuel Property Experimental Kinetics

Gina Fioroni, NREL

FT069: Multi-Mode: Fuel-Property Impacts and Limitations on Combustion--

Spark Ignition Focus

Derek Splitter, ORNL

FT070: Multi-Mode: From In-Cylinder Combustion Diagnostics to Drive-

Cycle Fuel Economy

Magnus Sjoberg, SNL

ELT257: Directed Electric Charging of Transportation using eXtreme Fast

Charging (XFC) (DIRECT XFC)

Tim Pennington, INL

ELT092: Wound Field and Hybrid Synchronous Machines for Electric

Vehicle Traction with Brushless Capacitive Rotor Field Excitation

Ian Brown, Illinois Institute of Technology

ELT093: High-Speed Hybrid Reluctance Motor with Anisotropic Materials

Edwin Chang, General Motors

FT037: Co-Optimization of Fuels and Engines (Co-Optima)

Robert Wagner, ORNL

Lunch Break

ELT082: Highly Integrated Wide Bandgap Power Module for Next

Generation Plug-In Vehicles

John Czubay, General Motors

2:15 PM

2:30 PM

3:00 PM

3:15 PM

3:30 PM

3:45 PM

4:00 PM

4:15 PM

4:30 PM

5:00 PM

5:15 PM

5:30 PM

5:45 PM

6:00 PM

6:15 PM

6:30 PM

FT089: Heavy-Duty Advanced Compression Ignition

John Dec, SNL

ELT189: Electric Truck with Range-Extending Engine (ETREE)

Jesse Dalton, Cummins

ELT190: Medium-Duty Urban Range Extended Connected Powertrain

(MURECP)

Matthew Thorington, Bosch

ELT158: Zero-Emission Cargo Transport II: San Pedro Bay Ports Hybrid &

Fuel-Cell Electric Vehicle Project

Seungbum Ha, SCAQMD

ELT191: Medium-Duty Vehicle Powertrain Electrification and

Demonstration

Wiley McCoy, McLaren

FT073: Co-Optima Emissions and Emissions Control for Spark Ignition and

Advanced Compression Ignition Multi-Mode Combustion

Sreshtha Sinha Majumdar, ORNL

FT074: Multi-Mode: Gasoline Direct-Injection Sprays

Lyle Pickett, SNL

FT075: Multi-Mode: Fuel Kinetics

Bill Pitz, LLNL

FT076: Model-Based Fuel and Engine Optimization

Juliane Mueller, LBNL

FT077: Heavy-Duty Mixed-Controlled Compression Ignition: Fuel Effects

and Ducted Fuel Injection

Charles Mueller, SNL

FT078: Heavy-Duty Mixed-Controlled Compression Ignition: Impacts of Fuel

Properties on Combustion, Injection Characteristics, and Emissions

Controls

Martin Wissink, ORNL

ELT257: Directed Electric Charging of Transportation using eXtreme Fast

Charging (XFC) (DIRECT XFC)

Tim Pennington, INL

ELT258: Grid-Enhanced, Mobility-Integrated Network Infrastructures for

Extreme Fast Charging (GEMINI-XFC)

Matteo Muratori, NREL

ELT115: Zero-Emission Cargo Transport I: Zero Emission Drayage Trucks

Phil Barroca, SCAQMD

6:45 PM

1:00 PM

1:15 PM

1:30 PM

1:45 PM

2:00 PM

MAT173: Self-Sensing Fiber-Reinforced

Composites

Christopher Bowland, ORNL

MAT147: Continuous-Fiber, Malleable Thermoset

Composites with Sub-1-Minute Dwell Times:

Validation of Impact Performance and Evaluation

of the Efficacy of the Compression Forming

Process

Gabriel Ilevbare, INL

EEMS011: Integrated Mesoscale Urban Systems

Modeling with Behavior, Energy, Autonomy, and

Mobility (BEAM) to Explore Shared and

Automated Vehicles and their Impacts on Energy

and Mobility

Zach Needell, LBNL

EEMS058: Systems and Modeling for Accelerated

Research in Transportation (SMART) Mobility

Consortium Tools and Process Development

EEMS030: Experimental Evaluation of Eco-Driving

Strategies

Wei-Bin Zhang, LBNL

EEMS044: Quantification of National Energy

Impacts of Electrified Shared Mobility with

Infrastructure Support

Joann Zhou, ANL

MAT152: A Hybrid Physics-Based, Data-Driven

Approach to Model Damage Accumulation in

Corrosion of Polymeric Adhesives

Roozbeh Dargazany, Michigan State University

MAT131: Corrosion Control in Carbon-Fiber

Reinforced Polymer Composite-Aluminum

Closure Panel Hem Joints

Brian Okerberg, PPG

MAT153: Multi-Scale Computational Platform for

Predictive Modeling of Corrosion in Aluminum-

Steel Joints

Miki Banu, University of Michigan

MAT132: High-Strength Steel-Aluminum

Components by Vaporizing Foil Actuator Welding

Glenn Daehn, Ohio State University

MAT133: Corrosion Protection and Dissimilar

Material Joining for Next-Generation Lightweight

Vehicles

DJ Spinella, Arconic

BAT395: Developing Safe, High-Energy, Fast-

Charge Batteries for Automobiles

Wenjuan Mattis, Microvast, Inc.

BAT396: Enabling Extreme Fast Charging through

Anode Modification

Esther Takeuchi, Stony Brook University

BAT397: Titanium Niobium Oxide-Based Lithium-

Ion Batteries for Extreme Fast-Charging

Applications

Sheng Dai, University of Tennessee at Knoxville

BAT398: Extreme Fast-Charging Lithium-Ion

Batteries

Edward Buiel, Edward Buiel Consulting, LLC

BAT400: Novel Liquid/Oligomer Hybrid Electrolyte

with High Lithium-Ion Transference Number (Hi-

LiT) for Extreme Fast Charging

Zhijia Du, ORNL

BAT401: Advanced Electrolytes for Extreme Fast

Charging

William Chueh, Stanford University

BAT442: Behind-the-Meter-Storage (BTMS)

Overview

Anthony Burrell, NREL

MAT125: Integrated Computational Materials

Engineering (ICME) Predictive Tools for Low-Cost

Carbon Fiber

Jeramie Adams, Western Research Institute

Carbon Fiber for Lightweight Vehicles

Xiadong Li, University of Virginia

EEMS074: Smart Cities Topology–Curbs and

Parking

Stanley Young, NREL

EEMS023: The Whole Traveler Tranportation-

Behavior Study

Anna Spurlock, LBNL

EEMS057: Urban Traveler–Changes and Impacts:

Mobility Energy Productivity (MEP) Metric

Venu Garikapali, NREL

EEMS045: Focused Validation and Data Collection

to SMART Activities

Eric Rask, ANL

Lunch Break

2:15 PM

2:30 PM

3:00 PM

3:15 PM

3:30 PM

3:45 PM

4:00 PM

4:15 PM

4:30 PM

5:00 PM

5:15 PM

5:30 PM

5:45 PM

6:00 PM

6:15 PM

6:30 PM

BAT416: Cobalt-Free Cathode Materials and Their

Novel Architectures

Shirley Meng, University of California at San

BAT417: Cobalt-Free Cathodes for Next-

Generation Lithium-Ion Batteries

Neil Kidner, Nexceris

BAT411: Aerosol Manufacturing Technology for

Production of Low-Cobalt Lithium-Ion Battery

Cathodes

Toivo Kodas, Cabot Corporation

BAT412: Novel Lithium-Iron and Aluminum

Nickelate (NFA) as Advanced Cobalt-Free Cathode

Materials

Ilias Belharouak, ORNL

BAT415: High-Nickel Cathode Materials for High-

Energy, Long-Life, Low-Cost Lithium-Ion Batteries

Arumugam Manthiram, University of Texas at

Austin

BAT414: Enhancing Oxygen Stability in Low-

Cobalt, Layered-Oxide Cathode Materials

Huolin Xin, University of California at Irvine

BAT413: High-Performance, Low-Cobalt Cathode

Materials for Lithium-Ion Batteries

Donghai Wang, Penn State UniversityMAT122: Close-Proximity Electromagnetic

Carbonization (CPEC)

Felix Paulauskas, ORNL

MAT174: Carbon-Fiber Technology Facility (CFTF)

Merlin Theodore, ORNL

EEMS016: Energy-Efficient CAVs

Dominik Karbowski, ANL

EEMS059: Experimental Evaluation of CACC for

Passenger Cars

Eric Rask, ANL

MAT119: Ultra-Light Hybrid Composite Door

Design, Manufacturing, and Demonstration

Nate Gravelle, TPI

MAT146: Ultra-Lightweight, Ductile Carbon-Fiber

Reinforced Composites

Vlastimil Kunc, ORNL

MAT117: Development and Integration of

Predictive Models for Manufacturing and

Structural Performance of Carbon-Fiber

Composites in Automotive Applications

Venkat Aitharaju, General Motors

BAT442: Behind-the-Meter-Storage (BTMS)

Overview

Anthony Burrell, NREL

BAT377: ReCell Overview and Update

Jeff Spangenberger, ANL

Carbon Fiber

Jeramie Adams, Western Research Institute

MAT118: Functionally Designed Ultra-Lightweight

Carbon-Fiber Reinforced Thermoplastic

Composites Door Assembly

Srikanth Pilla, Clemson University.

EEMS045: Focused Validation and Data Collection

to SMART Activities

Eric Rask, ANL

EEMS020: Multi-Scenario Assessment of

Optimization Opportunities due to Connectivity

and Automation

Jackeline Rios-Torres, ORNL

EEMS033: Using Truck Cooperative Adaptive

Cruise Control (CACC) to Test Operational Energy

Consumption at Intersection with Active Traffic

Signal Control

Xiao-Yun Lu, LBNL

EEMS039: Tradeoffs for Charging Infrastructure of

Human-Driven and Fully Automated Fleet in San

Francisco

John Smart, INL

EEMS081: Nationwide Energy and Mobility

Impacts of CAV Technologies

David Gohlke, ANL

6:45 PM

Time Advanced Combustion Engines (ACE) Fuel and Lubricant Technologies (FT)

1:00 PM

1:15 PM

1:30 PM

1:45 PM

2:00 PM

2:15 PM

2:30 PM Break

FT087: Multimode, Co-Optimized, Light-Duty Vehicle Engine

Phil Zoldak, Hyundai-Kia North America

Lunch Break

ACE155: Low-Mass and High-Efficiency Engine for Medium-Duty Truck

Applications

Qigui Wang, GM

ACE135: Towards Predictive Nozzle Flow and Combustion Simulations for

Compression Ignition Engines

Gina Magnotti, ANL

ACE154: Heavy-Duty Hybrid Diesel Engine with Front-End Accessory Drive-

Integrated Energy Storage

Chad Koci, Caterpillar

ACE001: Heavy-Duty Diesel Combustion

Mark Musculus, SNL

ACE136: Medium-Duty Diesel Combustion

Steven Busch, SNL

ACE157: Low-Temperature Gasoline Combustion for High-Efficiency

Medium- and Heavy-Duty Engines

John Dec, SNL

Thursday, June 4, Oral Presentations

ACE156: Next-Generation, High-Efficiency Boosted Engine Development

Michael Shelby, Ford

Time Advanced Combustion Engines (ACE) Fuel and Lubricant Technologies (FT)

3:00 PM

3:15 PM

3:30 PM

3:45 PM

4:00 PM

4:15 PM

4:30 PM

5:00 PM

5:15 PM

5:30 PM

5:45 PM

6:00 PM

6:15 PM

6:30 PM

6:45 PM

ACE102: Cummins-Peterbilt SuperTruck 2

Jon Dickson, Cummins

ACE101: Volvo SuperTruck 2: Pathway to Cost-Effective Commercialized

Freight Efficiency

Pascal Amar, Volvo Trucks North America

ACE100: Improving Transportation Efficiency through Integrated Vehicle,

Engine, and Powertrain Research - SuperTruck 2

Darek Villeneuve, Daimler Trucks North AmerIca

ACE124: SuperTruck 2 - PACCAR

Maarten Meijer, PACCAR

ACE103: Development and Demonstration of a Fuel-Efficient Class 8

Tractor and Trailer SuperTruck

Russell Zukouski, Navistar

1:00 PM

1:15 PM

1:30 PM

1:45 PM

2:00 PM

2:15 PM

2:30 PM

Electrification Technologies (ELT) Materials Technology (MAT)

Lunch Break

ELT204: Charging Infrastructure Technologies: Development of a Multiport,

>1 MW Charging System for Medium- and Heavy-Duty Electric Vehicles

Andrew Meintz, NREL

ELT241: High-Efficiency, Medium-Voltage Input, Solid-State, Transformer-

Based 400-kW/1000-V/400-A Extreme Fast Charger for Electric Vehicles

Charles Zhu, Delta Electronics

ELT198: Cybersecurity: Securing Vehicle Charging Infrastructure

Jay Johnson, SNL

ELT199: Cybersecurity: Consequence-Driven Cybersecurity for High-Power

Charging Infrastructure

Richard Carlson, INL

ELT206: Cybersecurity Platform and Certification Framework Development

for Extreme Fast Charging, Integrated Charging, Infrastructure Ecosystem

Tobias Whitney, EPRI

ELT207: Enabling Secure and Resilient Extreme Fast Charging: A

Software/Hardware Security Co-Design Approach

Ryan Gerdes, Virginia Tech

ELT205: Cybersecurity for Grid-Connected Extreme Fast Charging Station

(CyberX)

David Coats, ABB

MAT162: Machine Learning and Supercomputing to Predict

Corrosion/Oxidation of High-Performance Valve Alloys

Dongwon Shin, ORNL

MAT163: Multiscale Modeling of Corrosion and Oxidation Performance

and Their Impact on High-Temperature Fatigue of Automotive Exhaust

Manifold Components

Mei Li, Ford

MAT164: Multiscale Development and Validation of the Stainless Steel

Alloy Corrosion (SStAC) Tool for High-Temperature Engine Materials

Michael Tonks, University of Florida

MAT186: Modeling of Light-Duty Engines

Charles Finney, ORNL

MAT187: Fundamental Studies of Complex Precipitation Pathways in

Lightweight Alloys

Dongwon Shin, ORNL

ELT187: Comprehensive Assessment of On- and Off-Board, Vehicle-to-Grid

Technology Performance and Impacts on Batteries and the Grid (SPIN

System)

Sunil Chhaya, EPRI

MAT188: Properties of Cast Aluminum-Copper-Manganese-Zirconium

Alloys

Amit Shyam, ORNL

MAT189: Fundamental Development of Aluminum Alloys for Additive

Manufacturing

Alex Plotkowski, ORNL

MAT190: Oxidation Resistant Valve Alloys

G. Muralidharan, ORNL

3:00 PM

3:15 PM

3:30 PM

3:45 PM

4:00 PM

4:15 PM

4:30 PM

5:00 PM

5:15 PM

5:30 PM

5:45 PM

6:00 PM

6:15 PM

6:30 PM

6:45 PM

Electrification Technologies (ELT) Materials Technology (MAT)

ELT240: Wireless Extreme Fast Charging for Electric Trucks (WXFC-Trucks)

Mike Masquelier, WAVE

ELT197: High Power and Dynamic Wireless Charging of Electric Vehicles

Veda Galigekere, ORNL

ELT188: Bi-Directional Wireless Power Flow for Medium-Duty, Vehicle-to-

Grid Connectivity

Omar Onar, ORNL

MAT192: Fundamentals of Austenitic Alloys via Additive Manufacturing

Sebastien Dryepondt, ORNL

MAT193: Higher Temperature Heavy-Duty Piston Alloys

Dean Pierce, ORNL

MAT165: Directly Extruded High Conductivity Copper for Electric Machines

Keerti Kappagantula, PNNL

ELT236: Direct-Current Conversion Equipment Connected to the Medium-

Voltage Grid for Extreme Fast Charging Utilizing Modular and

Interoperable Architecture

Watson Collins, EPRI

ELT237: Enabling Extreme Fast Charging with Energy Storage

Jonathan Kimball, Missouri S&T

ELT238: Intelligent, Grid-Friendly, Modular Extreme Fast Charging System

with Solid-State Direct-Current Protection

Srdjan Lukic, North Carolina State University

ELT239: High-Power Inductive Charging System Development and

Integration for Mobility

Omer Onar, ORNL

MAT191: Overview of Advanced Characterization within the Powertrain

Materials Core Program

Tom Watkins, ORNL

1:00 PM

1:15 PM

1:30 PM

1:45 PM

2:00 PM

2:15 PM

2:30 PM

Battery R&D (BAT) Energy-Efficient Mobility Systems (EEMS)

EEMS027: Multi-Modal Energy Analysis for Freight

Alicia Birky, NREL

EEMS060: Agent-Based Model and Data Collection for Inter- and Intracity

Freight Movement

Monique Stinson, ANL

EEMS034: Optimization of Intra-City Freight Movement and New Delivery

Methods

Amy Moore, ORNL

EEMS078: Simulation Model Results for Energy and Mobility Impact of

Behavioral Scenarios in POLARIS

Joshua Auld, ANL

EEMS035: Coupling Land-Use Models and Network-Flow Models

Paul Wadell, University of California at Berkeley

Lunch Break

BAT364: Surface Coating for High-Energy Cathode

Jihui Yang, University of Washington

BAT317: Progress and Status of Battery500 Program

Jun Liu, PNNL

BAT359: Status and Challenges of Electrode Materials for High-Energy Cells

Stanley Whittingham, Binghamton University

BAT360: Scale-Up Optimization and Characterization of High-Nickel

Cathodes

Arumugam Manthiram, University of Texas at Austin

BAT361: Understanding Electrode Interface Through Cryogenic Electron

Microscopy

Yi Cui, Stanford University/SLAC

BAT362: Lithium-Metal Anodes: Problems and Multiple Solutions Based on

Hosts, Interphase, and Electrolytes

Jason Zhang, PNNL

BAT454: Development of Long-Life Lithium/Sulfur-Containing

Polyacrylonitrile Cells

Ping Liu, University of California at San Diego

BAT365: Stabilizing Lithium-Metal Anode by Interfacial Layer

Zhenan Bao, Stanford University/SLAC

3:00 PM

3:15 PM

3:30 PM

3:45 PM

4:00 PM

4:15 PM

4:30 PM

5:00 PM

5:15 PM

5:30 PM

5:45 PM

6:00 PM

6:15 PM

6:30 PM

6:45 PM

Battery R&D (BAT) Energy-Efficient Mobility Systems (EEMS)

BAT368: Battery500 Integrated Cell Diagnostics and Modeling to Identify

Critical Gaps in Achieving High Cycle Life

Eric Dufek, INL

BAT369: High-Energy Rechargeable Lithium-Metal Cells: Fabrication and

Integration

Jie Xiao, PNNL

BAT370: Advanced Diagnostics of Nickel-Rich, Layered-Oxide Secondary

Particles

Mike Toney, SLAC

BAT455: In Operando Characterization of Lithium Plating and Stripping

William Chueh, Stanford University

BAT366: Advanced Imaging and Quantitative Characterization of Lithium-

Metal Anode and Its Solid Electrolyte Interphase (SEI)

Shirley Meng, University of California at San Diego

BAT367: Characterization Studies on High-Nickel Cathode Materials

Peter Khalifah, BNL

tuesday, june 2, oral presentations - energy.gov · 2020-04-14 · venkat srinivasan, anl bat393:...

Documents

venkat dangeti spadmin1.0

presenter: venkat rao katkoori.,...

venkat flexiblepavement design

venkat project

permaculture view venkat

continued from part- 1 · (dist), telangana. india -502...

venkat apdss powerpoint

overview of the batteries for advanced transportation...

local anaesthesia venkat

imax technology (venkat)

venkat pattabathula

venkat toyo

venkat apdss printing

s2p3 venkat rayapati

sri venkat-engineers

the hive think tank: ai in the enterprise by venkat...

venkat pp org

mining methods - venkat

venkat project

cse561 spring 2001 venkat padmanabhan1 cse561: graduate...