user guide heat • vent • light

User Guide

Heat • Vent • Light

Model: 31211 Neo Single White - RemoteModel: 31212 Neo Single Silver - RemoteModel: 31111 Neo Single White - HardwiredModel: 31112 Neo Single Silver - Hardwired Electrical Rating: 230~240 V. 50 Hz.

Model: 32111 Neo Dual White - HardwiredModel: 32112 Neo Dual Silver - Hardwired

Model: 32111 and 32112 Neo Dual

Model: 31211, 31212, 31111 and 31112 Neo Single

2

WelcomeThank you for buying this IXL Tastic Neo. Even if you have used a Tastic before, there are very good reasons to read this user guide before using this one:• Youandyourfamily,propertyandhomewillbesafefromharm.• Youwilllearnhowthisappliancemaydifferfromothers.• ByusingtheTasticNeofullyandproperly,youwillgetmaximumlifeandvaluefromit.• OurwarrantydependsonyouusingtheTasticNeoaccordingtothisuserguide.Itwillonlytakeyouafewminutes,sopleasereadon!

ContentsTastic Neo Range ..........................................................Pg 3-4

Safety ............................................................................Pg 5-6

How it Works .................................................................... Pg 6

Ventilation Requirements ................................................ Pg 7

Clearances ....................................................................... Pg 7

Overview .......................................................................... Pg 8

Electrical Requirements .................................................. Pg 9

Wiring Diagrams ........................................................ Pg 9-12

Installation ................................................................Pg 12-16

Smart Switch Operation ................................................ Pg 17

Heat Lamp Replacement ..........................................Pg 18-19

CFL Replacement ........................................................... Pg 20

Replacement Lamps ...................................................... Pg 21

Cleaning & Maintenance ............................................... Pg 21

Frequently Asked Questions (FAQ) ...........................Pg 22-23

Products ......................................................................... Pg 24

Record Your Model ........................................................ Pg 25

Warranties .................................................................Pg 26-27

Tastic Neo RangeTastic®

31211 Neo Single – White1x800WTungstenHalogenHeatLamps3x9WCFLDownlights Remote Control CutoutTemplateSupplied170mmDuctedBlower,346m³/hror96l/s

31212 Neo Single – Silver1x800WTungstenHalogenHeatLamps3x9WCFLDownlights Remote Control CutoutTemplateSupplied170mmDuctedBlower,346m³/hror96l/s

31111 Neo Single – White1x800WTungstenHalogenHeatLamps3x9WCFLDownlights Hardwired CutoutTemplateSupplied170mmDuctedBlower,346m³/hror96l/s

31112 Neo Single – Silver1x800WTungstenHalogenHeatLamps3x9WCFLDownlights Hardwired CutoutTemplateSupplied170mmDuctedBlower,346m³/hror96l/s

Model: 31211 Neo Single – White

Model: 31112 Neo Single – Silver

4

Tastic Neo RangeTastic®

32111 Neo Dual – White2x800WTungstenHalogenHeatLamps3x9WCFLDownlights Hardwired CutoutTemplateSupplied170mmDuctedBlower,346m³/hror96l/s

32112 Neo Dual – Silver2x800WTungstenHalogenHeatLamps3x9WCFLDownlights Hardwired CutoutTemplateSupplied170mmDuctedBlower,346m³/hror96l/s

Model: 32111 Neo Dual - White

Model: 32112 Neo Dual - Silver

SafetyTastic®

NOTE:Thisproductmustbeinstalledbyaqualifiedinstaller.Readthroughtheseinstructionscompletelybeforecommencinginstallation.Thetungstenhalogenlampsheatbydirectradiationratherthanbyheatingtheairintheroom,sotheTastic should be located directly over where drying off occurs. LocatetheTasticinaccordancewiththerequirementsofthecurrentAustralian/NewZealandWiringRulesAS/NZS3000relatingtodampsituations.InsomeinstallationsthismaymeanthatnopartoftheTasticmaybelocateddirectlyaboveanypartofa bath or shower recess or enclosure. ForunenclosedshowersrefertoWiringRulesconditions.Switchesandothercontrolsmustnotbelocatedwheretheycanbetouchedbyapersoninthebath or shower.

NOTE:Tasticproductsmustonlybeinstalledhorizontallyinceiling.•Donotlookdirectlyintoheatlampswheninuse.•Tasticproductsarenottanninglamps.•MakesurethelampshavecooledandpowerisofftotheTasticbeforeremovinglampsforreplacement.•Donotoperatethisappliancewithoutthefasciaorglasspanelsinposition.•Thisapplianceisnotintendedforusebypersons(includingchildren)withreducedphysical,sensoryormentalcapabilities,orlackofexperienceandknowledge,unlesstheyhavebeengivensupervisionorinstructionconcerninguseoftheappliancebyapersonresponsiblefortheirsafety.•Youngchildrenshouldbesupervisedtoensuretheydonotplaywiththeappliance.•Thisappliancemustbemountedwiththelowestpointatleast2.3metresfromthefloor.•Ifthesupplycordisdamaged,itshouldbereplacedbytheIXLAppliancesoritsserviceagentorasimilarlyqualifiedpersoninordertoavoidahazard.•Thisappliancemustnotbemountedimmediatelybelowasocketoutlet.

WARNING: Curtains or combustible material may ignite if in contact with the heater.

SAFETYFEATURESThermal switch:WhenTasticNeoworksinFANOFFmodeandthetemperatureinsidetheunitreaches55°C,thethermalswitchwillswitchonthefanautomatically.Whenthetemperaturedrops,thethermalswitchwill switch off the fan.

Do not allow insulation material to rest against the sides or top of the Tastic Neo unit when installed. This Tastic unit must be

installed horizontally in the ceiling. There is no IP rating on any IXL Tastic Neo.

6

How it Works

Safety

TheIXLTasticNeorangehasbeendesignedtoexactingstandardstogiveyoumanyyearsoftrouble-freeoperation.ToensureyougetthemostfromyourTasticthereareafewsimplepointstokeepinmind.

HEATLAMPSTheIXLTasticNeouses800Wtungstenhalogenheatlampsinconjunctionwithreflectiveelements,foramoreefficientdispersionofradiantheat.Thetungstenhalogenlampsprovideinstantaneousheat,andaredesignedtoheatyouandnotyourbathroom-that’stheefficientwayinfraredheatworks.TogetthefullbenefitofTastic’stungstenhalogenwarmth,standdirectlyundertheheatlamps.IXL’sexclusivehalogenlampshavebeendesignedspecificallyforthisapplication,andconcentratetheirheatformaximumeffectiveness.Make sure you have the Tastic model that suits your bathroom ceiling height. This Tastic is manufacturedtoofferpeakperformancewithbathroomceilingheightsupto2.4m.

VENTILATIONToensureoptimumperformanceoftheexhaustfan,itisessentialthatthereisadequateairflowintoyourbathroomtohelptheTastic’sefficientexhaustfantoremovesteamwhileyoushower,ventingdirectlyoutside.YourTasticworksbydrawingsteam-ladenairfromtheroom,andaswithallexhaustfansitisessentialthatsufficientairinletsareprovided.Ensureadequateinletsexistthroughwindows,ventsorunderthedoor.Airflowpathfrominlettofanshouldideallypassoverthesteamsource.

CENTRE LIGHTSThe3compactfluorescentcentrelightsinTasticNeomodelsaredesignedtoprovidedirectionallightinginyourbathroom.Forspecifictaskslikeshavingorputtingmake-upon,youmayneedextralighting to suit your individual needs.Theheatlampscanalsobeusedtoprovideadditionalbrightilluminationforyourbathroom.Lightercolouredwallsanddecoralsohelpbrightenyourbathroombyreflectingmorelight.

Tastic®

Over-temperature switch (PTCR) (Hardwired Tastic Neo):Whenforanyreasonthetemperatureinsidetheunitreaches80°C,thePTCRwillcutoffpowertotheTasticNeo.ThePTCRcanberesetbyturningoffpowertotheunitattheisolatingswitchandallowingtocoolfor10-15minutes.InsuchacasetheServiceCentreshouldbecalledasthisisnotnormaloperation.Thermal fuse: (Remote Tastic Neo only)Whenforanyreasonthetemperatureinsidetheunitreaches93°C,thethermalfusewillcutoffpowertotheTasticNeo.InsuchacasetheServiceCentreshouldbecalledtoreplacethethermalfuse.

Ventilation RequirementsTastic®

Clearances

Thisappliancemustbemountedsothatthelowestpointisatleast2.3mabovethefloor.TheTasticbodyandductedblowerisdesignedtofitaceilingcavityorbetween–floorspacewithaminimumheight of 230 mm. The Tastic may be installed betweenjoistsusingthesuppliedtogglebolts (Fig.2c).EnsurethattheoutletoftheTasticisdirected towards the outer wall. If the desired orientation of the Tastic unit directs the ducting acrossceilingjoistsensurethattheclosestceilingjoistisnotwithin200mmoftheTasticoutlet.

Figure 2aA: 215 mm B: 15 mm min. clearance above unit

Figure 2bC: 15 mm D:166mmE: 35 mm F: 200 mm min.

Figure 2c20mmmin.clearanceisrequirednearalljoists

Formaximumefficiencyandfanperformancethereareafewkeypointstokeepinmindwheninstallingyour Tastic.

SufficientairinletintoroomSteamwillonlyberemovedifthereissufficientflowofairthroughtheroom.Ensuregenerousinletsexistthroughwindows,ventsorunderthedoor.Airflowpathfrominlettofanshouldideallypassoverthesteamsources(seeFig.1).Bathroomswhichhavehighceilings,arelargerthanaverage,orhaveanopenshowermayallrequireadditional ventilation. We recommend that you visit our website for further details and suggestions on effectively ventilating your bathroom.

Fig. 1: Ideal placement of Tastic. Sufficient air inlets into room are required

Fig. 2b: Minimum clearances for installation

Fig. 2a: Minimum blower clearances

E

F

C

D

Fig. 2c: Minimum clearances for installation

20mm

A

B

Toggle bolts

8

OverviewTastic®

Fig. 3: Layout of Tastic Neo Single and Dual.

Fig. 4: Layout of Tastic Neo Smart Switch Single.

Tastic Neo Models: 31111, 31112, 32111 & 32112

Tastic Neo Models: 31211 and 31212

Isolating wall switch (not supplied)

Isolating wall switch (not supplied)

Smart Switch remote

Wall switch (supplied)

Ducted blower

Ducted blower

Ducting

Ducting

Air outlet grille positioned in eaves lining

Exteriorof home

Exteriorof home

Air outlet grille positioned in eaves lining

Eaves lining

Eaves lining

Tastic unit

Tastic unit

Transition

Transition

Flexible support

Flexible support

Electrical RequirementsTastic®

Wiring Diagrams

For wiring connection seeadditional information

Figs. 10 & 12.

55°C

93°C

Fig. 5: Wiring diagram for models 31211 and 31212.

31211 & 31212: 3.5A 50Hz

Seethewiringdiagramsonthefollowingpagesforsupplyrequirementsandmaximumloadingsforeachmodel.Tasticsmaybeconnectedtoalightingorpowercircuitifloadingpermits.Thesemodelsareforwired-ininstallationandwiringmustbecarriedoutbyaregisteredelectrician.*SwitchesandawallplateareprovidedwiththehardwiredTasticNeo’s.AremotecontrolisprovidedwiththeSmartSwitchmodels.Donotusethisproductwithanysolidstatespeedcontrolorcommercialdimmingdevice.NOTE: The Permanent Active Connectionmustbeprovidedonthehardwiredmodelssotheunitcanfunction as it was designed to do so.* Number of switches depends on your Tastic model.

Tastic Neo units are fitted with CFL centre lamps. To ensure correct operation and to prolong the life of the CFLs please wire as

per the following wiring diagrams for the appropriate model.

Wiring Diagrams

10

Tastic®

For wiring connection

seeadditional

information Figs. 9 & 11.

For wiring connection

seeadditional

information Figs. 9 & 11.

Fig. 7: Wiring diagram for model 32111 and 32112.

Fig. 6: Wiring diagram for model 31111 and 31112.

31111 & 31112: 3.6A 50Hz

32111 & 32112: 6.8A 50Hz

Wiring – Aust & NZTastic®

Hardwired models 31111, 31112, 32111 & 32112: Alocalisolatingswitch(notsupplied)mustbeincorporatedinthefixedwiringtotheappliancetoallowdisconnectionofsupplyduringmaintenance. This isolating switch should be located in close proximitytotheTasticandmustbeinstalledinaccordancewithapplicableWiringCodes.Smart Switch models 31211 & 31212: Switch the poweroutletfortheControlUnitwithawallswitch(notsupplied)asperFig.9.DonotmountthepoweroutletfortheControlUnitmorethan200mmfromtheTastic.In both versions the wall switch should be located in accordancewithWiringRulesAS/NZS3000.Itmustnot be installed where it can be reached from the bath recessorenclosure(seeAS/NZS3000Section7).

Fig. 8: Hardwired

Fig. 9: Smart Switch

12

Tastic®

Fig. 12: Use template to mark position of Tastic

Installation

TheTasticmaybeinstalledbetweenjoistsusingthesuppliedtogglebolts,clearancesforthetwoverticalsidesmustbemaintainedasperFig.2conpage7.IMPORTANT: Joists, beams and rafters shall not be cutornotchedtoinstalltheappliance.

Wiring – UK & Eire

Hardwired models 31111, 31112, 32111 & 32112: The wall switch should be located in accordance with theapplicableWiringRulesanditmustnotbeinstalledwhere it can be reached from the bath or shower recess or enclosure.Smart Switch models 31211 & 31212:SupplyshouldbeconnectedtotheTastic3-corepowerleadasperthediagrambelow.Theplugfittedtothepowercordistobecutoffandthewiresstrippedtoallowconnection.SeeFig.10.Alocalisolatingswitch(notsupplied)mustbeincorporatedinthefixedwiringtotheappliancetoallowdisconnectionofsupplyduringmaintenance. This isolating switch should be located in close proximitytotheTasticandmustbeinstalledinaccordancewithapplicableWiringCodes.The colours of the wires in the Tastic 3-core lead maynotcorrespondtothoseinthefixedwiring. ThedesignationofpolesfortheTasticpowerleads are as follows:

Tastic Wire Colour Connect toSupply Pole

Brown Live

Blue Neutral

Green/Yellow Earth

Fig. 10: Hardwired

Fig. 11: Smart Switch

* This isolating switch must be double-pole type with minimum 3 mm contact gap.

InstallationTastic®

Dependingonyourmodel,theTastichasaweightof5–9kg(seebelow).IfadequatesupportisnotavailablefortheTastic,itmaybenecessarytoprovideextrastrengthening.NeoSingle–approx5kg NeoDual–approx9kgIf ceiling battens have been cut to install this productthenensurethatthecutceilingbattensareadequatelysecuredtorafters.NOTE:Thisproductmustbeinstalledbyaqualifiedinstaller.EnsurepowerisofftolocationofTastic.

Cut out hole for Tastic body1. Afterdeterminingthelocationofcomponents

according to the directions, mark out and cut apertureinceilingforTasticNEOunitusingthetemplatesuppliedwiththeTastic.Trimthetemplatetotheoutsideoftheblackoutlineallowing for the four rectangular notches.

2. UnscrewterminalcoveronHardwiredmodels.

Ducting1. Theseproductshavebeendesignedtosuit150

mm dia. ducting. Determine the length of ducting requiredensuringthatthelengthisasshortaspossible.RefertoFig’s13-15toattainoptimumperformance.

2. Tapealengthofducting1mlong(max)betweentheblowerinletandtheTransition.Taperemaininglengthofductingtoexitofblower.

Fig. 13: Straight ducting

Fig. 14: Gradual bends, ducting stretched straight

100%

100%

Performance

Performance

Fig. 15: Tightly compressed bends

100%Performance

14

InstallationTastic®

InstallingtheDuctedBlowerNOTE: The transition is assembled to the main body beforethemainbodyhasbeensnappedintoplaceinthe ceiling.1. Feedductingandblowerthroughholeinceiling.

While feeding ducting into ceiling direct it towards theinstallationpositionoftheoutletgrille.Positionblower so that the short length of ducting is stretchedoutandTransitionpiecealongwithstrippedorterminatedwireissittingnexttotheholeasperFig.16.

2. Make the necessary electrical connections.Smart switch models: Connect ducted blower powercordintointerconnectingsocketprovidedandconnectpowercordtosocketoutlet.Hardwired models: Connect ducted blower powercordtoterminalblockasperwiringdiagram and connect wall switch to terminal blockaspercircuitdiagram.

FinalAssembly1. Cliptransitiontothebody,ensuringthattheductingtapedtothetransitionisnotdislodged.PositiontheTasticbodyintotheaperture,sothattheplasticendsupportsarerestingontheplaster.AstheTasticisraisedintoceiling,ensureelectricalcablesdonotrestoverTastic.Placethefour toggle bolts through the recesses cut into theplaster,(Fig.17)andtightenthebolts.ThiswillraisetheTasticbodyflushtotheceiling(Fig.18).

2. BringfasciaassemblyuptotheTasticbody.(Fig.19)ConnecttheearthingwiretothefasciaandconnecttheIRsensorlead(SmartSwitchmodels).

3. ClipfasciaintotheTasticbody.4. Usingcare,fitthetubularheatlampsintothelampholders.Becarefulnottotouchtheglasssurface as oils from skin can shorten the life of theglasslamp.Acleansoftclothortissueisrecommended.Ensurethatthewhitereflective

Fig. 16

Fig. 17

Fig. 18

Blower power lead

Interconnecting power cord

Power cable

Fig. 19

InstallationTastic®

Fig. 20

1 23

layeronthetubularheatlampisontheuppersideofthelamp,ielampispointingdownwards.

5. Clipthedownlightmountsintothefascia.6. FittheglasssheetstotheheatlampreflectorbodiesFig.20.

7. EnsurethatthedipswitchesinthehandsetarecorrectlysetforyourlocalventilationrequirementsFig.26-27(pages16-17).

8. TurnonthepowerattheisolatingswitchandcheckoperationoftheTastic.

Installing the Grille1. Cutahole160mmindiameterineavesorouterwall.FeedductingoutthroughthisholeandtapetotheGrillebaseplate.

2. FeedtheductingbackthroughtheholesothattheGrille base is against the eaves or outer wall.

3. FixGrillebasewithfour6Gscrewsandsnapfitthe Grille louvres over the Grille base as shown in Fig.21.

Mounting the Smart Switch RemoteRemote Cradle1. SelectasuitablepositionfortheEasyDuctSmart

Switch Remote cradle.2. Check that the sensor will receive signals from the

remote in the location you have selected.3. Atthepositionselectedforthecradletobemounted,markthepositionsofthetwoscrewholes.Ifmountingintoplasterboardormasonryyoumayrequirespecificwallplugsormasonryanchors(notincluded)toprovidesuitablesupportfor the cradle and remote.

4. Screwthecradletothewallusing2of6Gscrews(notsupplied)andtightenscrews(Fig.22)

5. Swingthetopofthehandsetintothecradle(Fig.23-24.)

6. ChecktheoperationofallTasticfunctions.

Fig. 21

Smart

Switch

HEAT

FAN

LIGHT

ALLOFF

Smart

Switch

HEAT

FAN

LIGHT

ALLOFF

Smart

Switch

HEAT

FAN

LIGHT

ALLOFF

Fig. 22

Fig. 24

Fig. 23

6 G screws x 2

16

InstallationTastic®

The Smart Switch systemand functionsAllfunctionsarecontrolledbytheSmartSwitch (Fig.25),abatterypoweredwallmountedremoteunitthatsendsanInfrared(IR)signaltoareceivermountedintheTasticNeofascia.SubsequentsignalsgototheControlUnitmountedonthetopoftheTasticUnit.NOTE:WhiletheheatlampsareturnedON, the centre lampsareturnedOFF.1. Switch the centre light ON or OFF.2. SwitchheatlampON.3. SwitchheatlampOFF.4. PressingthisbuttononcewillswitchON the FAN.5. Switches the FAN OFF.6. SwitchesALL functions OFF.7. IR transmitter.8. Transmitterindicator.

RemotedipswitchsettingsThefactorypresetoftheDipSwitchesisforEurope(20minfanrun-on),allothercountry/regionsaretoresetdipswitchesasperlocalventilationrequirements.Recommendedsettingsasperdetailsshownin Figs.26&27.NOTE: The Smart Switch handset is not water resistant. Do not immerse the Smart Switch in water or allow water tosplashontheSmartSwitch.

InitialPowerUpUponinitialconnectiontomainsvoltage,thecentre lights will be switched on automatically for a minimum of 2 mins.

1

2

3

4

5

6

78

Fig. 25

12

ON

Fig. 26

Smart Switch OperationTastic®

40MinuteDelayOffThisTastichasapowersavingfeaturewhichwillautomaticallyswitchoffallfunctionsexceptthecentrelightsapproximately40minutesafterthelastsignalisreceivedfromtheIRremotehandset,providedthelastsignalwasoneofthefollowingbuttonoperations: FAN+,FAN-,HEAT+andHEAT-.

20MinuteAutoRun-onFan(RequiredinEuropeanCountries)This Tastic includes an automatic run-on for the fan. Each time the fan is switched on, it will run for a minimumof20minutes.IfyouswitchthefanOFFduring this time, the fan will run-on for the remainder ofthe20minutes.IfyouswitchthefanOFFafterthefanhasrunforatleast20minutes,thefanwillstop. SeeFig.26forhandsetswitchsettings.

ReplacementBatteriesSmartSwitch–4xAAA/1.5V/UM-4batteries IXLCat.No.626655BatteriessuppliedwiththeSmartSwitcharenotcovered by the manufacturer’s warranty.NOTE: Allfourbatteriesshouldbereplacedtogetherwhen necessary – do not use old batteries with new batteries.

12

ON

Fig. 27

18

Heat Lamp ReplacementTastic®

Parts

Filament

Socket

Heat Lamp

Reflector

PreparingTurntheheatlampoffandletitcoolforatleast5minutes.Forextrasafety,switchthepoweroffat the isolating switch.

PositionasturdyladderofsufficientheighttoletyousafelyandcomfortablyreachtheTasticNeo. Asksomeonetoholdtheladderifyoucan.

Removing Glass ShieldWithonehand,gentlypresstheglassshield(atapointclosetotheairinlet)2mmtowardstheceilingand carefully slide it towards the air inlet.

Holdyourotherhandbelowtheotherendoftheshieldtocatchitwhenitdrops.

Iftheshieldchips,cracksorbreaks,donotusetheheatlampwithoutit.ReplaceitwithIXLTastic® NeoTemperedGlassShieldPart12200,notnormalhouseholdglass.

RemovingOldHeatLampAspring-loadedsocketholdseachendoftheheatlamp.

Gentlygrasptheheatlampandpushittowardsonesocket.

Whenitisfreeoftheothersocket,carefullypulltheheatlampdowntowardsyou.

Theheatlampisnotrecyclable.Disposeofitlikeanormalincandescentlightglobe(i.e.unbroken,withyourgeneralwaste,wrappedinanypaperorclothyouused).

Heat Lamp ReplacementTastic®

Shield

Heat Lamp

Air Inlet

Socket

FittingNewHeatLampNaturalskinoilsandsaltsdamagenewhalogenlampsandshortentheirlife.Onlyhandleanewheatlampwithsoft,dry,clean,lint-freeclothorpaper.Youcanweargloves,coveryourfingersorwraptheheatlampuntilitisinstalled(solongasyouremoveallclothorpaperwhenfinished).

Ifyourskintouchesanewheatlamp,wipeitgentlyitwithalcohol-moistenedclothorpaper.

Theheatlampishalfcoatedwithawhitereflector.Whenyougrasptheheatlamp,facetheback ofthereflectortotheceiling(soyoucanseetheheatlamp’sfilament).Notdoingthiswill reduceperformance.

Fitoneendoftheheatlampintoasocketandgentlypushitawayfromtheothersocket.

Whenthereisenoughroom,fittheotherendoftheheatlampintoitssocket.

Gentlyrotatetheheatlamptoensureitiscorrectlyseated(i.e.itlooksliketheoldonedid beforeyouremovedit).

Replacetheshieldbyreversingthedirectionsforremovingit.

Switchthepoweronandtesttheheatlamp.

20

CFL ReplacementTastic®

Step 1 – Figure 28Tiltthelampring.

Step 2 – Figure 29Gripthelampringandpulllampfittingaway from fascia.

Step 3 – Figure 30Twistthelampholdertoseparatefromthelamp.

Step 4 – Figure 31Removethelampfromthelampring.

Step 5Reversethestepsabovetore-fitthelamp.

Fig. 28

Fig. 29

Fig. 30

Fig. 31

Cleaning & Maintenance

Tastic®

Replacement Lamps

NOTE: ReplacementwithanyotherlampsotherthanthoselistedbelowmaycausedamagetotheTastic Neo and void the warranty.

HeatLampsTheIXLTasticlampshavebeenspeciallydevelopedforbestperformance.R7s,258mmlong,800Wmax.IXLCatNo.11380NOTE: ReplaceonlywithgenuineIXLapprovedinfraredhalogenheatlamps.

LightBulbGU109WCFLCatNo.12250Light bulb is not covered by manufacturer’s warranty.NOTE: TheselampscanbereplacedwithHalogenlamps,50Wmaximum.

WARNING:Alwaysmakesuretheunitisturnedoffandallowallbulbstocoolbeforecleaning.MaintenanceoftheTasticNeoisrequiredtoensurethequalityoftheproductandfunctions are maintained. It is recommended that the Tastic Neo body, fascia and globes be checked and cleaned every 2 years.

Tocleanthefasciaandairinletuseadampclothwithliquidglasscleaner.

Cleaningandmaintenancewillhelptopreservethelife-spanandperformanceoftheTasticNeo.

22

FAQTastic®

ServiceNOTE: DonotremovetheTasticNeofromtheceiling.YourTasticNeowillbeservicedinyourhome.Ifserviceisrequired,pleasecontactIXL’sServiceCentreon1300727421.

FrequentlyaskedquestionsQ – Will my Tastic Neo heat my bathroom? A–NoyourTasticNeoisdesignedtoprovideinfraredradiantheattowarmthebodywhiledrying,

when standing directly underneath. It is not designed as a room heater.

Q – Can I install my Tastic Neo directly above a shower recess? A–Forsafetyreasonsitisnotrecommendedtoinstallaboveshowerrecess.PleaserefertothecurrentAustralian/NewZealandWiringRulesAS/NZS3000relatingtodampsituationsfor further details.

Q–WhatisthemaximumrecommendedlightglobewattagethatIcaninstallinmyTastic?A–50WHalogenGU10downlightscanbeinstalledinaTasticNeo.

Q–WhatwillhappenifIleavemyheatlampsonwithoutfanoperation?A–Thefanwillcommenceoperationautomaticallytokeeptheunitoperatingatasafetemperature.Whentheunithascooledsufficientlythefanwillswitchoffautomatically.

Q – Why is my Tastic Neo making noise?A–AllTasticscreatesomenoiseduetotherapidmovementofairthroughtheTastic.

Q–CanIretrofitaremotecontroltomyexistinghardwiredTasticNeo?A–No,unfortunatelythisisnotpossible.

Q – Can the installer rotate the IXL wall switch mechanisms?A–Yes,thewallswitchescanberotatedbyaqualifiedelectricaltradesperson.

Q–CanmyinstalleruseanalternativewallswitchmechanismotherthantheonesuppliedwithmyIXLproduct?

A–Yes,yourauthorisedinstallercanuseanalternativeswitchmechanism.

FAQTastic®

Q–MyTasticunit’sextractionfandoesn’tseemtoberemovingallthemoistureandsteamfrom my bathroom?

A–Thereareanumberoffactorsthatwillinfluencetheexhaustfan’sperformance.Firstlyyoucanimproveyourcrossventilationviaanopendoororwindow;refertopage7oftheinstructionsfordetailsonimprovingtheroom’sairflow.

If you live in a traditionally cooler climate, in the winter months during hot showers, you may noticethatthereismoremoistureandcondensationbuildup.Ifthisisthecase,youmaywishtoimproveyournaturalventilationorinvestinanadditionalexhaustfan.

Bathroomswhichhavehighceilings,arelargerthanaverage,orhaveanopenshowermayallrequireadditionalventilation.Werecommendthatyouvisitourwebsiteforfurtherdetailsandsuggestions on effectively ventilating your bathroom.

24

ProductsTastic®

IXL Range: Tastic and VentilationWithintheIXLTasticandventilationrangethereareanumberofproductsandoptionalaccessoriesavailable, these include:•Tastic3in1:Heat,LightandFan•Tastic2in1:LightandFan•DuctedTastics•VentilationFans•VentilationandLightUnits•EcoTastics•RemotecontrolledTastics(SmartSwitch)•EasyDuctThermalTransferSystem•TasticNeo

IXLRange:Accessories•GenuineIXLHeatLamps•CentreGlobes•InlineDucting•GrillesandFascias

Formoreinformationorhelp,pleasecontactSampfordIXLon1300727421orvisitthewebsiteatwww.sampfordixl.com.au

Record Your ModelTastic®

RECORD THE DETAILS OF YOUR MODEL AND KEEP THE FOLLOWING INFORMATIONDO NOT SEND THIS TO IXL.

InstalledBy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Suburb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

DateofPurchase. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Model No.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Serial No . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

26

WarrantyTastic®

ThisWarrantyagainstdefectsforyournewlypurchasedTasticproductisproudlypreparedbySampfordIXLPtyLtdof421SmithStreet,Fitzroy,VIC3065,phone1300727421.1. SampfordIXLTasticproductscomewithguaranteesthatdonotexcludethefollowingconsumerentitlementsundertheAustralianConsumerLaw:a.replacementorrefundforamajorfailureandcompensationforanyotherreasonablyforeseeablelossordamage;and

b.tohavethegoodsrepairedorreplacedifgoodsfailtobeofacceptablequalityandthefailuredoesnotamounttoamajorfailure.

2. SampfordIXLwarrantsthatyourproductandrelatedsupplywillbefreefromdefectsinmaterialsandworkmanshipduringthewarrantyterm.Yourwarrantytermisfiveyearswithatwoyearheatlampreplacementwarranty,commencingfromthedateofpurchase.SampfordIXLacknowledgesthisproductrequiresprofessionalinstallationandproductremovalishazardoustoconsumers,accordinglyanynecessaryinspectionsandserviceswillbecarriedoutonsite.Youshouldnotattemptde-installation.

3. SubjecttoPoint1,SampfordIXLwillrepairanydefectsinmaterialsandworkmanshipduringthewarrantytermandiftheproductisdeemedirreparableprovideareplacementofanequivalentcurrentmodelwherethebalanceofthewarrantyperiodfromtheoriginaldateofpurchasewilltakeeffect.

4. TothefullestextentpermittedbylawandsubjectalwaystoPoint1,SampfordIXLwillnot be liable for: a.anylossordamagearisingfromlossofuse,lossofprofitsorrevenue;orb.foranyindirectorconsequentiallossordamageresultingfromanybreachofthis

warranty against defects.5. DefectiveSampfordIXLTasticproductsmayberepairedusingrefurbishedpartsorifrequired,completelyreplacedbyarefurbishedproductofthesametype.

LimitationstoYourIXLWarranty6. SubjecttoPoint1,thisWarranty:

a.willonlybeprovidedtotheoriginalpurchaserwheretheoriginalpurchasewasmadefromaSampfordIXLAuthorisedDealerorResellerandproofofsuchpurchasecanbepresentedatthetimeofservice;

b.onlyappliestoSampfordIXLTasticproductspurchasedinAustraliafromaSampfordIXLAuthorisedDealerorResellerandinstalledbyaqualifiedpersonwhereaCertificateofComplianceinaccordancewithState/Territorylawsisprovided;

c.willnotapplywherethedefectinorfailureoftheproductisattributabletomisuse, abuse,accidentornon-observationofthemanufacturer’sinstructions.Thisproduct mustbeusedinaccordancewiththemanufacturer’sinstructions;

d. will not cover faults due to normal wear and tear with reasonable use nor consumable componentssuchasglobes,filters,glassitems,etc;

WarrantyTastic®

e.willnotcoveranydamagesorproblemscausedtothisproductbynaturalforceseg.storm,fire,flood,andearthquake;orbyintrusionoraccumulation(orboth)offoreignmatterseg.dust,soil,andmoisture.SampfordIXLrecommendsthatyoutakeoutappropriateinsurancestoprotectyourproducttothisend;

f. willnotapplyifthisproductisinstalledinamobiledwellingeg.caravanorboat;g.willnotapplyifthisproductisremovedfromthelocationwhereitwasfirstinstalled;h.isimmediatelyvoidiftheserialormodelnumberlabelisremovedordefaced;i. isimmediatelyvoidiftheproductisservicedorrepairedbyaunauthorised/unqualifiedpersonnel;

j. coversuseofthisproductfordomesticuseonly;k.willnotberestartedorextendeduponrepairorreplacementoftheproductorapart.

HowtomakeaClaimunderYourIXLWarranty7. To make a claim under this Warranty you will need to:

a.contactSampfordIXLservicedepartmenton1300727421or aftersalesservice@sampfordixl.com.autoprovidedetailsandregisteryourclaimenabling aSampfordIXLassessment;

b.submitproofofpurchasewithyourclaimeg.taxinvoiceorpurchasereceipt;c.whereapropertyhasbeenconstructedbyabuilder/developeranditisfittedwithIXLproducts,pleasesubmitproofofpurchasebywayofthecertificateofoccupancy, with your claim.

8. SampfordIXLwillcontactyoutomakearrangementsforserviceonsite.9. SubjecttoPoint1,youwillberesponsibleforanycostsrelatingtotheprovisionofyourproducttoaSampfordIXLAuthorisedServiceDealer.

10.SubjecttoPoint1,intheeventyoulivemorethan50kmfromaSampfordIXLAuthorisedServiceDealeryoumaybesubjecttotravelortransportcoststofacilitatetherepairingorreplacementofyourIXLproduct.

11.SampfordIXLanditsAuthorisedServiceDealersreservetherighttoseekreimbursementofanycostsincurredbythemshouldyourIXLproductbefoundtobeingoodworkingorder.

PrivacyTheprivacyofyourpersonalinformationhasalwaysbeenimportanttous.Tolearnmoreabout howwecollect,keepanduseyourpersonalinformation,pleaseobtainacopyofourprivacy statementbyvisitingourwebsiteatwww.sampfordixl.com.auorbycontactingusviaemailon info@sampfordixl.com.auorbytelephoneon1300727421.

Part

num

ber 6

1102

4_B.

Forcomments,questionsorwarrantymatters:

Sampford IXL Pty Ltd ServiceDepartment421 Smith StFitzroyVictoria3065AustraliaPhone:1300727421 Fax:1300727425aftersalesservice@sampfordixl.com.au info@sampfordixl.com.auwww.sampfordixl.com.au

Approved by the appropriate electrical supply authorities.I N H O M E

WARRANTY