&kulvwpdv'rphv - cleverpatch

3
Create your own miniature Christmas world with these plastic Christmas Domes! Perfect for hanging on the tree, using as table decorations or simply bringing some Christmas cheer to your desk! Use your favourite decorative Christmas items in your Christmas Dome. You could even use a miniature Christmas Tree as we have! SEARCH TERMS: Christmas, dome, craft, plastic, bauble, ornament, hanging, scene, deer, tree Materials: 10082 BluTack 75g Pack 11160 Craft Line Clear 30 Metres 11252 Cotton Balls White Pack of 240 15152 CleverPatch Fine Glitter Silver 145g Shaker Tub 15173 Glue Dots Permanent Pack of 300 16288 Cardboard White A4 Pack of 100 18915 Battery LED Tealight Candles Pack of 12 18933 Mini Jingle Bells Pack of 50 18940 18941 10364 CleverPatch Junior PVA Glue 250ml 15518 Student Scissors Each 18766 Hobby Knife Each Any Questions? Just call 1300 836 522 Christmas Domes www.cleverpatch.com.au/ideas/byoccasion/christmas/christmasdomes How to: © CleverPatch™ 2022. Subject to terms of use at https://www.cleverpatch.com.au

Upload: others

Post on 14-May-2022

1 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: &KULVWPDV'RPHV - CleverPatch

STEP 1

First we’ll create the Christmas tree dome! Cut a piece of craft line and carefully thread and tie mini jingle bells along its length.Wrap the craft line around the Christmas tree, gently pushing it into the fibres so it holds in place.

STEP 2

Use PVA glue and silver glitter to decorate inside the base of the plastic dome. Allow to dry. Use glue dots to attach the ‘cork’ of theLED Light String to the middle of the bottom of the dome, making sure the switch is facing up. Use Blu­Tack to stick the tree on topof the ‘cork’ so it is nicely centred and standing straight.

STEP 3

Take some cotton balls and fluff them out so you have a good handful. Arrange the cotton balls around the base of the tree sothey cover the ‘cork’ of the LED Light String. Make sure the light string is sticking out so it can be easily manipulated.

STEP 4

Switch the LED Light String on and then coil the lights up and around the tree. Carefully place the dome over the top, making sureto tuck all the lights and cotton balls into the dome. Screw the dome shut and it’s now ready to hang on the tree!

STEP 5

Now we can make the Christmas forest dome! Print out the template provided onto cardboard.

STEP 6

Use a hobby knife to carefully cut out the design. Adult supervision is recommended when using a hobby knife. Bend the designinto a circle and make sure it fits nicely into the dome. Hold in place, remove from the dome and attach with a glue dot so it holdsit’s shape.

STEP 7

Unscrew the dome and brush PVA Glue into the bottom lid. Sprinkle silver glitter over the top. Tap off any excess glitter onto scrappaper and allow to dry.

STEP 8

Switch on an LED Tealight Candle and use Blu­Tack to attach to the bottom of the dome, making sure it’s centred. Screw the domeshut and it’s now ready to hang on your tree!

Create your own miniature Christmas world with these plastic ChristmasDomes! Perfect for hanging on the tree, using as table decorations orsimply bringing some Christmas cheer to your desk!

Use your favourite decorative Christmas items in your Christmas Dome.You could even use a miniature Christmas Tree as we have!SEARCH TERMS:  Christmas, dome, craft, plastic, bauble, ornament, hanging, scene, deer,tree

Materials:10082 ­ Blu­Tack ­ 75g Pack

11160 ­ Craft Line ­ Clear ­ 30 Metres

11252 ­ Cotton Balls ­ White ­ Pack of 240

15152 ­ CleverPatch Fine Glitter ­ Silver ­ 145g Shaker Tub

15173 ­ Glue Dots ­ Permanent ­ Pack of 300

16288 ­ Cardboard ­ White ­ A4 ­ Pack of 100

18915 ­ Battery LED Tealight Candles ­ Pack of 12

18933 ­ Mini Jingle Bells ­ Pack of 50

18940 ­

18941 ­

10364 ­ CleverPatch Junior PVA Glue ­ 250ml

15518 ­ Student Scissors ­ Each

18766 ­ Hobby Knife ­ Each

Any Questions?Just call 1300 836 522

Christmas Domeswww.cleverpatch.com.au/ideas/by­occasion/christmas/christmas­domes

How to:

© CleverPatch™ 2022. Subject to terms of use at https://www.cleverpatch.com.au

Page 2: &KULVWPDV'RPHV - CleverPatch

STEP 1

First we’ll create the Christmas tree dome! Cut a piece of craft line and carefully thread and tie mini jingle bells along its length.Wrap the craft line around the Christmas tree, gently pushing it into the fibres so it holds in place.

STEP 2

Use PVA glue and silver glitter to decorate inside the base of the plastic dome. Allow to dry. Use glue dots to attach the ‘cork’ of theLED Light String to the middle of the bottom of the dome, making sure the switch is facing up. Use Blu­Tack to stick the tree on topof the ‘cork’ so it is nicely centred and standing straight.

STEP 3

Take some cotton balls and fluff them out so you have a good handful. Arrange the cotton balls around the base of the tree sothey cover the ‘cork’ of the LED Light String. Make sure the light string is sticking out so it can be easily manipulated.

STEP 4

Switch the LED Light String on and then coil the lights up and around the tree. Carefully place the dome over the top, making sureto tuck all the lights and cotton balls into the dome. Screw the dome shut and it’s now ready to hang on the tree!

STEP 5

Now we can make the Christmas forest dome! Print out the template provided onto cardboard.

STEP 6

Use a hobby knife to carefully cut out the design. Adult supervision is recommended when using a hobby knife. Bend the designinto a circle and make sure it fits nicely into the dome. Hold in place, remove from the dome and attach with a glue dot so it holdsit’s shape.

STEP 7

Unscrew the dome and brush PVA Glue into the bottom lid. Sprinkle silver glitter over the top. Tap off any excess glitter onto scrappaper and allow to dry.

STEP 8

Switch on an LED Tealight Candle and use Blu­Tack to attach to the bottom of the dome, making sure it’s centred. Screw the domeshut and it’s now ready to hang on your tree!

Create your own miniature Christmas world with these plastic ChristmasDomes! Perfect for hanging on the tree, using as table decorations orsimply bringing some Christmas cheer to your desk!

Use your favourite decorative Christmas items in your Christmas Dome.You could even use a miniature Christmas Tree as we have!SEARCH TERMS:  Christmas, dome, craft, plastic, bauble, ornament, hanging, scene, deer,tree

Materials:10082 ­ Blu­Tack ­ 75g Pack

11160 ­ Craft Line ­ Clear ­ 30 Metres

11252 ­ Cotton Balls ­ White ­ Pack of 240

15152 ­ CleverPatch Fine Glitter ­ Silver ­ 145g Shaker Tub

15173 ­ Glue Dots ­ Permanent ­ Pack of 300

16288 ­ Cardboard ­ White ­ A4 ­ Pack of 100

18915 ­ Battery LED Tealight Candles ­ Pack of 12

18933 ­ Mini Jingle Bells ­ Pack of 50

18940 ­

18941 ­

10364 ­ CleverPatch Junior PVA Glue ­ 250ml

15518 ­ Student Scissors ­ Each

18766 ­ Hobby Knife ­ Each

Any Questions?Just call 1300 836 522

Christmas Domeswww.cleverpatch.com.au/ideas/by­occasion/christmas/christmas­domes

How to:

© CleverPatch™ 2022. Subject to terms of use at https://www.cleverpatch.com.au

Page 3: &KULVWPDV'RPHV - CleverPatch

STEP 1

First we’ll create the Christmas tree dome! Cut a piece of craft line and carefully thread and tie mini jingle bells along its length.Wrap the craft line around the Christmas tree, gently pushing it into the fibres so it holds in place.

STEP 2

Use PVA glue and silver glitter to decorate inside the base of the plastic dome. Allow to dry. Use glue dots to attach the ‘cork’ of theLED Light String to the middle of the bottom of the dome, making sure the switch is facing up. Use Blu­Tack to stick the tree on topof the ‘cork’ so it is nicely centred and standing straight.

STEP 3

Take some cotton balls and fluff them out so you have a good handful. Arrange the cotton balls around the base of the tree sothey cover the ‘cork’ of the LED Light String. Make sure the light string is sticking out so it can be easily manipulated.

STEP 4

Switch the LED Light String on and then coil the lights up and around the tree. Carefully place the dome over the top, making sureto tuck all the lights and cotton balls into the dome. Screw the dome shut and it’s now ready to hang on the tree!

STEP 5

Now we can make the Christmas forest dome! Print out the template provided onto cardboard.

STEP 6

Use a hobby knife to carefully cut out the design. Adult supervision is recommended when using a hobby knife. Bend the designinto a circle and make sure it fits nicely into the dome. Hold in place, remove from the dome and attach with a glue dot so it holdsit’s shape.

STEP 7

Unscrew the dome and brush PVA Glue into the bottom lid. Sprinkle silver glitter over the top. Tap off any excess glitter onto scrappaper and allow to dry.

STEP 8

Switch on an LED Tealight Candle and use Blu­Tack to attach to the bottom of the dome, making sure it’s centred. Screw the domeshut and it’s now ready to hang on your tree!

Create your own miniature Christmas world with these plastic ChristmasDomes! Perfect for hanging on the tree, using as table decorations orsimply bringing some Christmas cheer to your desk!

Use your favourite decorative Christmas items in your Christmas Dome.You could even use a miniature Christmas Tree as we have!SEARCH TERMS:  Christmas, dome, craft, plastic, bauble, ornament, hanging, scene, deer,tree

Materials:10082 ­ Blu­Tack ­ 75g Pack

11160 ­ Craft Line ­ Clear ­ 30 Metres

11252 ­ Cotton Balls ­ White ­ Pack of 240

15152 ­ CleverPatch Fine Glitter ­ Silver ­ 145g Shaker Tub

15173 ­ Glue Dots ­ Permanent ­ Pack of 300

16288 ­ Cardboard ­ White ­ A4 ­ Pack of 100

18915 ­ Battery LED Tealight Candles ­ Pack of 12

18933 ­ Mini Jingle Bells ­ Pack of 50

18940 ­

18941 ­

10364 ­ CleverPatch Junior PVA Glue ­ 250ml

15518 ­ Student Scissors ­ Each

18766 ­ Hobby Knife ­ Each

Any Questions?Just call 1300 836 522

Christmas Domeswww.cleverpatch.com.au/ideas/by­occasion/christmas/christmas­domes

How to:

© CleverPatch™ 2022. Subject to terms of use at https://www.cleverpatch.com.au