an improved low-kickback, narrow-kerf chain - oregon
TRANSCRIPT
OREGON® • Blount Inc. • oregonproducts.com
90PX — MICRO-LITE® SAW CHAIN
An Improved Low-Kickback, Narrow-Kerf Chain
SPECIfICATIONS
Chain Pitch 3/8"÷ 2
Chain Gauge .043" (1.1 mm)
Cutter Style Chamfer-Chisel™
Kickback Reduction
Bumper Drive Link
Recommended Bar Length
6–16" (15–40 cm)
Recommended Saw Sizes
up to 2.5 cu. in. (41 cc) gas and
electric pole saws
Recommended User
Consumer
Semi-Pro
fEATURES BENEfITSMicro-Lite® narrow-kerf • Less power is required to make the same cut
(as compared to 3/8" low profile .050" chain)
Bumper drive link • Reduces kickback without sacrificing performance• Meets ANSI B175.1 standards for
low-kickback saw chain
• Outstanding performance, fast and efficient cutting
• Excellent stay-sharp
• Helps keep oil where it’s needed, on the chain• Directs oil to the critical rivet flange/hole interface
• Helps carry oil around the full length of the guide bar’s groove
• Reduces vibration 25% or more at the saw handles
• Provides a visual guide to better maintain a proper filing angle
OREGON® • Blount Inc. • oregonproducts.com
SHARPENING & GRINDING TOOL PART NUMBERSKITS
5-3/4" Dia.
(12) (10)
511AX OR 534-18 558549
(12)
31692 70511 12211 31941 38278
SHARPENING & GRINDING ANGLES
11/64"4.5 mm
30° 0° .025"
1/8" 30° 0° 55° .025"
CHAIN REPLACEMENT PARTS
P104711 P108045
NOTE: Individual parts packages contain 25 pieces.
90PX — Micro-Lite® chains aMsP a106985 aB 3/13
SHARPENING NOTES
* When using an OREGON® file guide, ALWAYS hold it level (0°) and flat on the top plate.
WARNING
The saw chain in this package is low kickback saw chain. It met the reduced kickback requirements of ANSI B175.1 and CSA Z62.3 when tested on a representative sample of chain saws. Its safety features significantly reduce the hazard of kickback while maintaining high cutting performance.
ALL CUTTING CHAINS CAN KICK BACK, which may result in severe personal injury to the chain saw operator or bystanders. Operate your chain saw safely. Read all warnings in your chain saw operator’s manual.
90PX — MICRO-LITE™ SAW CHAIN
OREGON®, Micro-Lite and Double Guard are registered trademarks and Chamfer-Chisel, Lubriwell, LubriLink and Vibe-Ban are trademarks of Blount, Inc.For more information on these and other OREGON® products, contact your authorized OREGON® distributor, or:
OREGON® | BLOUNT, INC. PO Box 22127 · Portland, OR, U.S.A. 97269-2127 Phone: 800-223-5168 Fax: 503-653-4201 Web: oregonproducts.com OREGON DISTRIBUTION LTD. 505 Edinburgh Rd. N., Guelph, Ontario, Canada N1H 6L4 Phone: 519-822-6870 Fax: 519-822-4999