andersen / pella casement & awning operators
TRANSCRIPT
AndersenSpecify Handing.Right Hand Shown
ANDERSEN
3-7/8"
58-2 Crank Handle soldseparately. Track soldseparately.Order 58-Channel.
Please send a sample foraccurate identification
58 Right HandShown
Andersen2073
**Includes 975-1 Crank Handle.
9/16"
*9" & 11" Arm
Offset-down
1-1/2"1-1/2"
2-3/4"
3-7/8"
1-3/16"
Andersen
Left Hand ShownBracket soldseparately
10002
TOP VIEW OF HOUSING
3-7/8"
Andersen
4"
Comes with rods and975-1 Crank Handle
Long - 34" Short - 24-7/8"
*Please Specify Long or Short Arms When Ordering:
1285*
17-1/8"12-3/8"
1285Long / Short*
Andersen
33"
5-5/8"
4990
Available in 33",36", 39" ArmsOrder #125-16 1/4replacement trackseparately.
Andersen
4-5/8"
22-7/16"
*Long = 5" Short = 3-5/32"
Please specify.
*
4993*
4"
9-1/2"
Order No. 327 CrankHandle Separately
Left Hand Shown.
Pella9492
9-1/2"
14-3/4"
Right HandShown.
Sill Sizes: 20", 21", 30"
Pella42
* 9-1/4" or 10-1/4"
2026 Andersen
58-RevBlack nylon shoe withslot for channel.Shoe is mountedunder operator arm.
9" or 11"*
Andersen
Andersen / Pella Casement &Awning Operators
17319 Blaine DriveHagerstown, Md 21740
Toll Free: 800-678-1919Fax: 888-250-3960
e-mail: [email protected]: www.blainewindow.com
Right hand shown - see note above
í
*10-1/4"
ANDERSEN
Specify Handing.Right Hand Shown
Track sold separately. Available in 17", 21"& 25". Specify left or right hand.
3"
3-1/8"*9" actual measurement - 8-7/8"11" actual measurement - 11-3/16"
*Arm measuresfrom gear centerto button rivetcenter
*Arm measured from gearcenter to shoe rivet center.
*Arm measured from gearcenter to shoe rivet center
3-1/8"
G5-55
**
Bronze painted finish
UNAVAILABLE
Limited Supply
Left hand available,Limited quantites.Right hand obsolete.Order 2073 shownabove and 2074 track.
58-2 crank handle sold separately.
58-2 crank handlesold separately.
975-1 crankhandle soldseparately.
Comes with #00301 crank handle
UNAVAILABLE
Order10147-061withinstructions.58-2 handle soldseparately.
We have windowoperators for all windowconfigurations. Pleasecontact our CustomerService Department at
800-678-1919 forassistance with your
window hardware needs.
43.54 TRUTH
5/16X 18Tapped
1-1/2"
17319 Blaine DriveHagerstown, Md 21740
Toll Free: 800-678-1919Fax: 888-250-3960
Operator
Link
PLEASE MAILYOUR COMPLETESAMPLE (IncludingArm, Link & AllFasteners At TheEnd Of The Link)
1. Operator drilled to your sample.2. Link Attached.3. Crank handle included.4. Fasteners supplied when sample is provided.
Replacement
2-1/4"
2"
5/16-18Threads
Tru•Seal
4-5/8"
5/16-18Thread1-1/2" 7/16"
60-Orig
Sold with #303crank handle.
5"
1-3/8"5/16X 18Tapped
MIAMI
5-1/8"
5/16X 18Tapped
Sold with #901 crankhandle.
3713 80
7/16"
1-7/16"2-3/8"
2-3/16"
Right HandShown
5/16-18Thread
5-1/4"
Comes with No.320 CrankHandle
2066
10-24ThreadedStud
2-1/2"
2-5/16"
1-1/8"
Right HandShown
Comes with#303 CrankHandle
5-1/4"
3718
5"
5"
1-1/2" 5/16" Hex
Sold with #344crank handle.
5/16X 18Tapped
5/16 X 18Tapped
Woodco
4-11/16"
Sold with #303crank handle.
Tapped1/4" - 28
Woodco
Tapped1/4" - 28
4-11/16"
Sold with #303crank handle.
5-7/16"
5/16" HoleDiameter
Right Hand Shown.
Sold with#303 crankhandle.
TOP VIEW OF HOUSING
3-7/8"Offset1/8"
E-RingStud
4-1/4"
Sold with#303crankhandle.
TOP VIEW OF HOUSING
3-7/8"4-3/4"
Right Hand Shown.
UNAVAILABLE
UNAVAILABLE
Unavailable
3707
OffsetArm
2008-Offset2008 Flat 2045 2048
77Replace with No. 77
Replace withNo. 95, at right 95
5-1/8"
73-R
Sold with #320Crank Handle.
CUSTOM AWNING OPERATORS
Awning Operators
e-mail: [email protected]: www.blainewindow.com
Right HandShown
Right Hand
Right HandShown
Flat Arm
Now with newstyle housing.Will differslightly fromthe picture
G5-56
2-3/16"
5-1/4"
2-1/2"
27/32"
7/16"
5/16-18Thread
Sold with#303CrankHandle
Right HandShown
Aluminum Finish
13/16"7/16"
3/8"Dia.
2-3/16" 5-1/4"
Right HandShown
7/16"Sold with No.303 CrankHandle
Aluminum Finish
Order 3707,at left
17319 Blaine DriveHagerstown, Md 21740
Toll Free: 800-678-1919Fax: 888-250-3960
e-mail: [email protected]: www.blainewindow.com
Please send a sample foraccurate identification
LINKOFFSET
SIDE VIEW
TOP VIEW 3-15/16"
Clip
Truth Dual Arm Operator Blaine Part No. Color
*20-1/2"11.43.00.001Arm Length
28-3/4"11.44.00.001 *
.468 Max.
.312A
B
Guide Bar
Shoe Stud
.449
.816 Min.
.204
(Guide Bar) Dual Pull
A
Sash
Frame
1.950
1 Preferred Mounting Holes
1 1
31641 Guide Bar10005 Shoe Studs10341.XX Cover10579.XX Handle31642 Guide Bar
Hardware ShownSold Separately
Recommended Screws:Operators:Wood: 6(P/N 19240.92) Steel SST #8 x 1.0 Phillips, Flat Head, Sheet Metal ScrewsPVC / Metal: 6 #8 Phillips, Flat Head Screws (Length and thread type determined by profile).Guide Bar: 3(P/N 19240.92) #8 x 1.0 Phillips, Flat Head, sheet metal screws.
Truth Casement & Awning Operators
G5-60
15.11.00.001 As Shown15.11.00.002 Opposite
Aluminum & Vinyl Window Awning Operator
Blaine Part No. ColorAluminumClayWhiteChestnut Brz.BronzeWhite
24"24"24"24"24"24"
22.10.01.10222.10.22.10222.10.32.10322.10.23.10422.10.03.10222.19.32.001*
Arm Length
*Note:RM models have rear threaded holes for rearmounting.
22.10 Front Mount22.19 Rear Mount
*
11.43.00.001 20-1-8” (A)11.44.00.001 28-3/4” (A)
*Number 10341 Cover sold separately.
Number 10579 crank handle sold separately. Order handle color to match the cover.
Guide bar sold separately. Order number31641.92 (22-3/4") or 31642.92 (30-3/4").
31641 Guide Bar10005 Shoe Studs10341.XX Cover10579.XX Handle31642 Guide Bar30591 Detach Clips S.S.
Shoes sold separately . Order number 10005
24"
Order 10579.XX crankhandle separately
Track No. 30169 - 2 per operator
“A”
Guide Bar
30591 DetachClip S.S.
Blaine Part No. A22.12511.43.00.001
B
30.12511.44.00.00122.75030.750
*No. 10341 cover sold separately
Truth Dyad Arm Operator
No. 10579 Crank Handle sold sepa-rately. Order color matcing no. 10341cover.
Bracket for end of link sold separately. Order 12511.92bracket for 15.11.00.002 operator. For 15.11.00.001operator, order 12510.92 bracket, as shown
22.21
23.77.XX.001 as shown23.77.XX.002 opposite
Truth Scissors Arm Operator For Awning Windows
23.03.XX.001 as shown23.03.XX.002 opposite
9”
Discontinued “Original Style”Arm
9-1/2”
Due to engineering designchanges, “New Style Arm”replaces original.
In some cases the No. 3 position mountingscrew may need to be eliminated or grounddown in length due to interference in the fullclosing position of the arm. Anotheralternative would be to grind a notch in thearm to clear the screw end.
Also available with rear mount housing.Order #23.00.XX.001 as shown, aboveor #23.00.XX.002 opposite
23.01.XX.001 as shown23.01.XX.002 opposite
10579.XX crank handlesold separately
17319 Blaine DriveHagerstown, Md 21740
Toll Free: 800-678-1919Fax: 888-250-3960
e-mail: [email protected]: www.blainewindow.com
OperatorPart No.
22.21
22.22
22.23
22.27
22.28
22.29
"A"
21-1/2"
21-1/2"
16"
21-1/2"
21-1/2"
16"
Mounting
Front
Rear
Stabilizing Tab
Order Part No. 11481
"B" ArmClearance
1/4"
11/32"
11/32"
1/4"
11/32"
11/32"
10579 Crank handle sold separately
Truth Awning / Casement Operators
G5-61
XX denotes color. Please contactCustomer Service for availablecolors.
Rear Mount (2 Holes) orFront Mount (4 Holes)
Rear Mount Dimension (Inside holes on front mount 6-1/8" c/c)
Scissors Arm Operator ForAwning Windows
10579 Crank HandleSold separately
*Order 20008 Sash Hookseparately
"A"
"B"
13-1/2"
Left Hand
Right Hand
17319 Blaine DriveHagerstown, Md 21740
Toll Free: 800-678-1919Fax: 888-250-3960
e-mail: [email protected]: www.blainewindow.com
1001
14 56
2020
2100 3718
CrestlineNo. 361 GoldCrank HandleIncluded
3/8”
Crestline
14 tooth replacement gear forCrestline No. 2020 Operator
Extra 14 Tooth Gears Also Available. Order738. Covers no longer available.
Nowmanufactured by Blaine
738
7/8"
2-7/8"
3-5/8"Peachtree Operator
10-24ThreadedStud
2-1/2"
2-5/16"
1-1/8"
Right HandShown
Sold with#303 CrankHandle
5-1/4"
Aluminum FinishRight hand only asshown
3/8"
2-1/2"
5/16" holeNo threads
5"
3/8"
3-15/16"
3-1/2"
2-7/8"
Sold asa kit
1. Determine the similarity of your sample tothe picture, at left.
2. Note the following:a. 800-A kits work for most obsoletejalousie operators.b. 800-A operators work on the leftand right side.c. 3 links in package allow for besthook-up to replace original.d. Package includes all fasteners.e. Comes in dull aluminum finish
only.
Right Hand Shown.
Arm Lengths: 9", 13"
13"
Detroit Swing Lite
Sold with #302Crank Handle.
Sold with #301Crank Handle.
Replacement
9"
Specify Handing.Left Hand Shown.Left Hand MostCommonly Used.
1-3/8"
Sold with #302Crank Handle.
45 45-1/2
2"
1-1/2"
726
Stanley Stanley
5/16"
11/16"
1/2"
712Ualco
Ualco
45-1/2 currently unavailable
Order No. 468-1" connector separately
Order No. 322 crank handle separately
No. 468-8" extension now unavailable.
Order crank handleseparately:01001-1-060
9”
Bronze painted finish
3-7/16”
11/16”
Nowmanufactured by Blaine
54
Awning Operators
Sold with #303crank handle
4-1/4" hole centers
3-7/8" &4-3/4"holecenters
800A
3/8"Hex
322 Crank handle sold separately
Operator for ResidentialSash. Use with #712Gear, shown at left and#399 Crank Handle . Bothsold separately.
3995/16"
Die CastAluminum Finish
5/16"Hex
3/8"Hex
1-3/4"
1"
2"2-3/4"
1-1/2"
G5-63
10.10 - 20"10.14 - 13"
10.11
11.30 12" arm11.12 16" arm11.10 21" arm
11.14
17319 Blaine DriveHagerstown, Md 21740
Toll Free: 800-678-1919Fax: 888-250-3960
e-mail: [email protected]: www.blainewindow.com
Please send a sample foraccurate identification
2-5/8"Uses one hook
*Measure the distance from thebottom of the mounting plate tothe base (see drawing above).Order the operator by the letterdesignation that corresponds tothe measured distance.
22-3/8"
*Trim Sill GapArm Length: 22-3/8"
If Your Trim Sill Gap Measures:1" order c
C = 3/4" orderE = 1/2" orderF = 3/8" order
2-5/8"Uses two hooks
Arm Length: 25"25"
2-5/8"Uses two hooks
Truth Part No.
11.30.03.00111.30.32.00111.10.29.00111.10.32.00111.10.03.00111.10.24.00111.12.03.00111.12.29.00111.12.32.001
Arm Length Color
BronzeWhiteGoldWhiteBronzeBeigeBronzeGoldWhite
12"12"21"21"21"21"16"16"16"
*
Note: Bronze - Painted Finish
Blaine Part No.
11.14.13.00111.14.29.00111.14.32.00111.14.03.001
Color
BrassGoldWhiteBronze
25"25"25"25"
Arm Length
Note: Bronze - Painted Finish Brass - Bright Plated Finish
Blaine Part No. Color13"20"20"13"13"20"20"20"20"13"20"
10.14.03.00310.10.29.00110.10.03.00310.14.13.00210.14.37.00110.10.13.00210.10.29.00510.10.03.00510.10.37.00110.14.29.00110.10.03.001
BronzeGoldBronzeBrassOff WhiteBrassGoldBronzeOff WhiteGoldBronze
Trim Sill Gap3/4" C3/4" C3/4" C3/8" F1/2" E1/2" E1/2" E1/2" E1/2" E3/8" F3/8" F
Arm Length
Truth Part No. Color22-3/8"22-3/8"22-3/8"22-3/8"22-3/8"22-3/8"22-3/8"
10.11.29.00410.11.03.00510.11.13.10210.11.03.00310.11.29.00210.11.03.00110.11.32.001
GoldTrim Sill Gap
3/4" 3/4" 1/2" 1/2" 3/8" 3/8" 3/8"
Arm Length
Order 10579.XX crank handle separately
Order 10579.XX crankhandle separately
BronzeBrassBronzeGoldBronzeWhite
Truth Awning Operators
G5-64
Specify 13" or 20"
C = 3/4”E = 1/2"F = 3/8"
Truth Wood Window Awning Operator
*Measure the distancefrom the bottom of themounting plate to thebase (see drawingabove). Order theoperator by the letterdesignation thatcorresponds to themeasured distance.
2-5/8"
Uses one hook
20008 Hook
20008 Hook
20008 Hook
20008 Hook
Note: Bronze - Painted Finish Brass - Bright Plated Finish