PRO

DU

CT

BRO

CHUR

E

1300 301 755 SAYFA.COM.AUGROUP ACCESS PROTECT EQUIP

GROUP ACCESS PROTECT EQUIP

PROPRIETARY ANCHOR POINT SYSTEM FOR SAFE WORK AT HEIGHT

- Non-corrosive 316 stainless steel - High load rating capacity

PRODUCT SPECIFICATION

PRODUCT CODE AP 124 DESCRIPTION THROUGH BOLT ANCHOR POINT - M16 X 300mm - 15kN RATED

THROUGH BOLT ANCHOR POINT

CODE DESCRIPTION SPECIFICATION SUMMARY

AP124XPLORA THROUGH BOLT ANCHOR POINT System design, supply, layout, installation and certification by a Sayfa accredited installer, as per the manufacturer’s instructions and current standards.

TECHNICAL DATA RATING - Single person installed rating - 15kN - Break test peak load rating - 90kN MATERIALS - 316 stainless steel

DIMENSIONS - Eyebolt - diameter 60mm OD, 35mm ID - Collar - 34mm OD x 16mm - Threaded Rod - M16 x 300mm - Flange - 70mm OD x 16.5mm ID x 3mm

WEIGHT- 0.7kg

COMPLIANCE The AP124 through bolt anchor point is designed and manufactured in accordance with requirements of Australian Standards AS/NZS 1891.4:2009, AS/NZS 4488.2:1997 and AS/NZS 5532:2013.

TESTING Testing and performance based on AS1891.4:2009. - Dynamic load test - 15kN - Static load test - 15kN

PRODUCT WARRANTY 10 years from date of purchase subject to correct installation, use and maintenance in accordance with manufacturer’s specifications and recommendations.

INSPECTION AND MAINTENANCE

This device requires periodic inspection and maintenance by a qualified safety inspector. See load testing note below. (Refer instruction manual.)

IMPORTANT NOTE Minimum thickness of concrete - 150mm. Thickness less than 150mm requires compliance by having structure certified and the anchor proof load tested as AS/NZ 1891.4:2009. Device is for personnel use only.

Designed and manufactured by Sayfa Group. For all technical assistance contact Sayfa Group. SAYFAGROUP-07.06.2018

GROUP ACCESS PROTECT EQUIP

GROUP ACCESS PROTECT EQUIP

T 1300 301 755F 1300 881 092E INFO@SAYFA.COM.AU

FOR MORE INFORMATION VISIT SAYFA.COM.AU

1029 MOUNTAIN HWYBORONIA VIC 3155AUSTRALIA

TECHNICAL SPECIFICATION

AP124 - THROUGH BOLT ANCHOR POINT

DISCLAIMER All product specifications and technical descriptions, recommendations and other information provided, are given as general guidance and advice, and are to be read in conjunction with Sayfa Group installation instructions and any other data available and applicable to each particular standard product or system. Use of such data is however the user’s sole responsibility, taking into account the intended application and actual conditions existing on the particular worksite. Consequent selection of the right product for any particular use, remains the user’s ultimate responsibility. Sayfa Group is therefore not obligated or liable for any direct or indirect, incidental or consequential damages, losses or expenses in connection with, or by reason of the suitability and use of or otherwise, any product or system for any purpose. Implied warranties of merchantability or fitness for any particular purpose, are specifically excluded.

All Sayfa Group products must be installed and used by competent personnel trained in the selection, safe use and maintenance of fall arrest systems and equipment by a registered training organisation (RTO) Installation not in accordance with Sayfa Group requirements or the use of non Sayfa Group components will void all certification and warranties.

Suitability of support structure and design layout of system is the responsibility of the installer and should be verified by a structural engineer or a site specific live load test done to ensure conformance. Maintenance and usage of the system in accordance with Sayfa Group requirements is the responsibility of the owner or manager of the workplace.

AP124 - BATCH NUMBER

1

REVISIONS REMARKSDate

2345

SAYFA SYSTEMS CONFIDENTIAL MATERIALThis drawing is copyright© and all rights are reserved. The design and specifications contained herein are confidential and the property of SAYFA SYSTEMS. The information may not be divulged or used in any form or by any means, for any purpose other than that stated by SAYFA SYSTEMS. Storage, transmittal, forwarding to third party, copying, reproduction, viewing or scanning of this Drawing by any person or party, whether in whole or in part is prohibited, except with express prior written consent by SAYFA SYSTEMS. The perspective is only an indication of the planned installation.

Drawing No.

RepBySayfa Group1029 Mountain HighwayBoronia Vic 3155Tel:- 03 8727 9000Fax:- 03 8727 9002Email:- technical@sayfa.com.auWeb:- www.sayfa.com.au

26/06/15

6035

...

...

...

...

Proofing RP BV

XPLORA Through Bolt Anchor PointM16 x 300

AP124

AluminiumMaterial

ProductCode FAB NO:

300mm

M16 Nut

Spring Washer

Rubber Seal 70mm OD x 16.5 ID x 3mm

M16 316 SS Threaded Rod

Flange 70mm OD x 16.5 ID x 3mm

Collar 34mm OD x 16 ID

Eye 60mm OD 35mm ID

SPEC SHEET