apex brochure
DESCRIPTION
Gyratory motion screenTRANSCRIPT
PR
OD
UC
T B
UL
LE
TIN
| AP
EX
™ S
CR
EE
NE
R
PR
OD
UC
T B
UL
LE
TIN
| AP
EX
™ S
CR
EE
NE
R
APEX™ Specifications
To find your local Rotex™ representative visit www.rotex.com
ScreenerAPEX™
Nearly 700 Apex™ Screeners are installed worldwide
Rotex Apex™ Screener
Modified Apex™ with inspection panels and aspiration on discharge chuteModified Apex™ with hinged discharge chute and easy to remove top panel
High Efficiency Performance, Ergonomic DesignApex screeners provide the same great Rotex efficiency at a lower operating cost.
The Apex™ Screener is built to meet your requirements:
Unique Rotex Gyratory-Reciprocating motion provides maximum product recovery
Designed for single-operator use to reduce handling expense
Lightweight, pretensioned screen panels allow for easy inspection and changes in minutes
Free mATeriAl AnAlySiS Over 100 years of proven correlation between lab test results and actual field performance:
Experienced Lab Technicians and Application Engineers recommend machine size, settings and screen openings to ensure accurate, efficient separations
Comprehensive separation analysis
Summary report provides data to support ROI decisions
The following specifications are for Apex Screeners of standard construction, ranging from single surface models (two grades – one separation) to three surface models (four grades – three separations). Drawings are representative, but overall dimensions may vary depending on the mounting method.
PR
OD
UC
T S
HE
ET
|A
PE
X™
SC
RE
EN
ER
High Efficiency Performance, Ergonomic DesignThe APEX™ screener is designed to provide the same great screening efficiency at a lower operating cost
The APEX™ Screener is built to meet your requirements:
Unique Rotex Gyratory Reciprocating Motion for unmatched product recovery, efficiency and yield
Designed for single-operator efficiency with reduced operations expense and increased uptime
Light-weight, pre-tensioned screen panels – inspect and change screens in a matter of moments
Standard footprint machine
Larger footprint machine
FREE mATERiAl AnAlySiS to help achieve thehighest yields with consistent on-spec product:
Free confidential, accurate laboratory testing
Comprehensive separation analysis
In-depth sieve analysis
Our experienced Lab Technicians and Application Engineers will optimize your Rotex machine size, screen openings and machine settings to ensure the most accurate separations at the highest possible rates
Over 400 APEX™ Screeners are installed throughout the world
ScreenerAPEX™
The APEX™ Screener enables a single operator to manage and service a number of screeners, this results in reducedoperating costs as we redirect resources elsewhere.”Production Manager - Industrial Mineral Processor
“
Rotex™ APEX Screener
PR
OD
UC
T S
HE
ET
|A
PE
X™
SC
RE
EN
ER
APEX™ Specification
To find your local ROTEX representative visit www.rotex.com
2 1.5 91 2311 44 1118 36 914 67 1702 1700 7711 2 1.5 143 3632 47 1194 36 914 69 1753 2000 9073 3 2.2 150 3810 55 1397 60 1524 132 3353 3800 1723
3 3 2.2 150 3810 72 1829 36 914 68 1727 4100 18595 5 3.7 195 4953 58 1473 60 1524 132 3353 4500 2041
7 7.5 5.6 174 4420 79 2007 60 1524 132 3353 6900 31291 10 7.5 222 5639 81 2057 73 1854 132 3353 10500 4762
9 2 1.5 109 2769 50 1270 36 914 67 1702 1800 8161 3 2.2 156 3962 60 1524 36 914 69 1753 3500 15873 5 3.7 172 4369 62 1575 60 1524 132 3353 4400 19955 7.5 5.6 214 5436 70 1778 60 1524 132 3353 7200 3265
7 10 7.5 185 4699 90 2286 73 1854 132 3353 11000 49891 10 7.5 231 5867 94 2388 73 1854 132 3353 13500 61221 3 2.2 159 4039 68 1727 36 914 69 1753 3800 17233 7.5 5.6 177 4496 73 1854 60 1524 132 3353 7000 31755 10 7.5 234 5944 75 1905 73 1854 132 3353 10500 4762
5 10 7.5 234 5944 86 2184 73 1854 132 3353 13500 6122
S
9 0.818 1.735 3.335 3.355 5.1
70 6.5 110 10.2 3
9 0.818 1.735 3.355 5.1
70 6.5 110 10.2 3
18 1.735 3.355 5.1
55 5.1
9-1* 30 9 018-1* 30 18 135-1 80 35 3
35C-1†* 80 35 355-1 80 55 5
70-1 † 50 70 6110-1 † 70 1
9-2* 30 9 018-2* 80 18 135-2 80 35 355-2 50 55 5
70-2 † 70 70 6110-2 † 70 118-3* 835-3 555-3 7
55-4 70 55 5
1
2
34
Apex
Screener
PR
OD
UC
T S
HE
ET
| AP
EX
SC
RE
EN
ER
™
™P
RO
DU
CT
SH
EE
T | A
PE
X S
CR
EE
NE
R™
PR
OD
UC
T S
HE
ET
|
AP
EX
S
CR
EE
NE
R™
PR
OD
UC
T S
HE
ET
|
AP
EX
S
CR
EE
NE
R™
™ Rotex Apex Screener ™
Ergonomic DesignLarge doors on the side of the machine allow easy access which results in screen changes of less than 2 minutes per panel with a 1 man operation
Financial Advantage
Reduced labor costs – one person operation
Reduced down time – ergonomic design enables faster screen changes with a single operator
Improved Quality – the proven superiority of low angle, long stroke gyratory-reciprocating motion increases the amount of separated product you can sell
Increased Capacity – multiple machine sizes and con�guration enable you to customise capacity for your application and space requirements
Rugged, time-proven construction means this machine will support your process for many, many years to come
ROTEX Screeners produce the highest yields of consistent on-spec product with minimum rejection of good material.
Positive Screen CleaningBouncing balls keep screen openings clear, maintaining e�ciency and capacity
Ergonomic DesignNew side access doors enable changes in less than two minutes per panel
Quick Release CamsLift cams and positive sealing
.Sealing StripsComponents are sealed using continuous sealing strips for separation of screen decks
Reduced MaintenanceEasy access to discharge units and external drive unit reduces maintenance time with a 1 man operation
The Apex screener provides lower operating costs and higher productivity to increase your ROI
Speed
ft2 m2 in. mm rpm in. mm in. mm in. mm in. mm lb kg9-1* 30 9 0.8 2.5 64 252 2 1.5 91 2311 44 1118 36 914 67 1702 1700 77118-1* 30 18 1.7 2.5 64 252 2 1.5 143 3632 47 1194 36 914 69 1753 2000 90735-1 80 35 3.3 3 76 216 3 2.2 150 3810 55 1397 60 1524 132 3353 3800 1723
35C-1†* 80 35 3.3 3 76 216 3 2.2 150 3810 72 1829 36 914 68 1727 4100 185955-1 80 55 5.1 3 76 216 5 3.7 195 4953 58 1473 60 1524 132 3353 4500 2041
70-1 † 50 70 6.5 3.5 89 200 7.5 5.6 174 4420 79 2007 60 1524 132 3353 6900 3129110-1 † 70 110 10.2 3.5 89 200 10 7.5 222 5639 81 2057 73 1854 132 3353 10500 4762
9-2* 30 9 0.8 2.5 64 252 2 1.5 109 2769 50 1270 36 914 67 1702 1800 81618-2* 80 18 1.7 3 76 216 3 2.2 156 3962 60 1524 36 914 69 1753 3500 158735-2 80 35 3.3 3 76 216 5 3.7 172 4369 62 1575 60 1524 132 3353 4400 199555-2 50 55 5.1 3.5 89 200 7.5 5.6 214 5436 70 1778 60 1524 132 3353 7200 3265
70-2 † 70 70 6.5 3.5 89 200 10 7.5 185 4699 90 2286 73 1854 132 3353 11000 4989110-2 † 70 110 10.2 3.5 89 200 10 7.5 231 5867 94 2388 73 1854 132 3353 13500 612218-3* 80 18 1.7 3 76 216 3 2.2 159 4039 68 1727 36 914 69 1753 3800 172335-3 50 35 3.3 3.5 89 200 7.5 5.6 177 4496 73 1854 60 1524 132 3353 7000 317555-3 70 55 5.1 3.5 89 200 10 7.5 234 5944 75 1905 73 1854 132 3353 10500 4762
55-4 70 55 5.1 3.5 89 200 10 7.5 234 5944 86 2184 73 1854 132 3353 13500 6122
Speed
ft2 m2 in. mm rpm in. mm in. mm in. mm in. mm lb kg71L-1 50 71 6.6 3.5 89 200 7.5 5.695L-1 70 95 8.8 3.5 89 200 10 7.5 290 7366 73 1854 89 2261 164 4166 10500 476271L-2 70 71 6.6 3.5 89 200 10 7.5 250 6350 82 2083 89 2261 164 4166 11000 498995L-2 70 95 8.8 3.5 89 200 10 7.5 290 7366 85 2159 89 2261 164 4166 12500 5669
71L-3 70 71 6.6 3.5 89 200 10 7.5 244 6198 76 1930 89 2261 164 4166 13000 5896
Principal Dimensions
A. Overall LengthAPEX™Model
Number
Motor
hp kW
DriveHeadSeries
APEX™ Screener Models - 30" x 42" (762mm x 1067mm) Panels
Total Nominal Area
Number of Screen
SurfacesD. Installation WidthB. Overall Height C. Base Width Shipping Weight
Screen Motion
Stroke
Contact Rotex
Number of Screen
Surfaces
APEX™Model
Number
DriveHeadSeries
Total Nominal Area
* indicates access from one side only.
Motor
† indicates two deck independently fed ("stacked") design.
Principal Dimensions
Shipping WeightStroke
hp kWA. Overall Length B. Overall Height C. Base Width D. Installation Width
Screen Motion
Apex screener models - 30” x 42” (762mm x 1067mm) panels
Apex screener models - 38” x 45” (965mm x 1143mm) panels
1
2
34
123
Apex screeners are production screening machines for separating dry materials according to particle size. Through their unique gyratory-reciprocating motion, near horizontal screen surface and unique positive screen mesh cleaning system, the Apex provides unusually high e�ciency and capacity.
Rotex Apex Screener - Material Flow Through Machine
Global Headquarters | 1230 Knowlton Street | Cincinnati, OH 45223 | Tel: (513) 541 1236 | Email: [email protected]
www.rotex.com
.
No ofScreen
Surfaces
1
2
3
4
5
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
Nom. AreaPer Screen
SurfaceSq. Meter
Strokemm
RPM KW RPM A B C D
ShippingWeight
Kg
Screen Motion Motor Principal dimensions - mm
The speci�cations listed below are based upon a Apex Screener of standard construction ranging from a single screen model (2 grades - 1 seperation) to a 5 screen model (6 grades - 5 seperations). Drawings are representative of ROTEX model, but overall dimensions may vary depending on the mounting method and drive head used.
Rotex Apex Screener
Incoming Material
Fines Product Overs
The new APEX screener is designed for e�cient performance, quick and easy maintenance / cleaning and increased process “up-time” within your production line
E�cient Performance, Ergonomic Design, Rotex Quality
Bene�ts
Why Application and Process Engineers Choose Apex Screeners
Ease of operation, low maintenance cost, years of trouble-free operation
Classic low angle, long stroke, Rotex gyratory-reciprocating motion creates most e�cient screening environment
Built by experienced, knowledgeable application engineers who understand your product
Ergonomic design enables single operator/maintenance e�ciency
Rotex Screeners o�er peace of mind
Proven Rotex gyratory reciprocating motion for unmatched product recovery e�ciency and increased pro�ts
Increased capacity and decreased operating costs in the same footprint
Available with or without aspiration for additional cleaning capabilities
Designed for reduced downtime, ease of maintenance and quick screen replacements
Proven rugged, long-lasting and versatile screener used in countless applications throughout the world for decades
Apex
Screener
PR
OD
UC
T S
HE
ET
| AP
EX
SC
RE
EN
ER
™
™P
RO
DU
CT
SH
EE
T | A
PE
X S
CR
EE
NE
R™
PR
OD
UC
T S
HE
ET
|
AP
EX
S
CR
EE
NE
R™
PR
OD
UC
T S
HE
ET
|
AP
EX
S
CR
EE
NE
R™
™ Rotex Apex Screener ™
Ergonomic DesignLarge doors on the side of the machine allow easy access which results in screen changes of less than 2 minutes per panel with a 1 man operation
Financial Advantage
Reduced labor costs – one person operation
Reduced down time – ergonomic design enables faster screen changes with a single operator
Improved Quality – the proven superiority of low angle, long stroke gyratory-reciprocating motion increases the amount of separated product you can sell
Increased Capacity – multiple machine sizes and con�guration enable you to customise capacity for your application and space requirements
Rugged, time-proven construction means this machine will support your process for many, many years to come
ROTEX Screeners produce the highest yields of consistent on-spec product with minimum rejection of good material.
Positive Screen CleaningBouncing balls keep screen openings clear, maintaining e�ciency and capacity
Ergonomic DesignNew side access doors enable changes in less than two minutes per panel
Quick Release CamsLift cams and positive sealing
.Sealing StripsComponents are sealed using continuous sealing strips for separation of screen decks
Reduced MaintenanceEasy access to discharge units and external drive unit reduces maintenance time with a 1 man operation
The Apex screener provides lower operating costs and higher productivity to increase your ROI
Speed
ft2 m2 in. mm rpm in. mm in. mm in. mm in. mm lb kg9-1* 30 9 0.8 2.5 64 252 2 1.5 91 2311 44 1118 36 914 67 1702 1700 77118-1* 30 18 1.7 2.5 64 252 2 1.5 143 3632 47 1194 36 914 69 1753 2000 90735-1 80 35 3.3 3 76 216 3 2.2 150 3810 55 1397 60 1524 132 3353 3800 1723
35C-1†* 80 35 3.3 3 76 216 3 2.2 150 3810 72 1829 36 914 68 1727 4100 185955-1 80 55 5.1 3 76 216 5 3.7 195 4953 58 1473 60 1524 132 3353 4500 2041
70-1 † 50 70 6.5 3.5 89 200 7.5 5.6 174 4420 79 2007 60 1524 132 3353 6900 3129110-1 † 70 110 10.2 3.5 89 200 10 7.5 222 5639 81 2057 73 1854 132 3353 10500 4762
9-2* 30 9 0.8 2.5 64 252 2 1.5 109 2769 50 1270 36 914 67 1702 1800 81618-2* 80 18 1.7 3 76 216 3 2.2 156 3962 60 1524 36 914 69 1753 3500 158735-2 80 35 3.3 3 76 216 5 3.7 172 4369 62 1575 60 1524 132 3353 4400 199555-2 50 55 5.1 3.5 89 200 7.5 5.6 214 5436 70 1778 60 1524 132 3353 7200 3265
70-2 † 70 70 6.5 3.5 89 200 10 7.5 185 4699 90 2286 73 1854 132 3353 11000 4989110-2 † 70 110 10.2 3.5 89 200 10 7.5 231 5867 94 2388 73 1854 132 3353 13500 612218-3* 80 18 1.7 3 76 216 3 2.2 159 4039 68 1727 36 914 69 1753 3800 172335-3 50 35 3.3 3.5 89 200 7.5 5.6 177 4496 73 1854 60 1524 132 3353 7000 317555-3 70 55 5.1 3.5 89 200 10 7.5 234 5944 75 1905 73 1854 132 3353 10500 4762
55-4 70 55 5.1 3.5 89 200 10 7.5 234 5944 86 2184 73 1854 132 3353 13500 6122
Speed
ft2 m2 in. mm rpm in. mm in. mm in. mm in. mm lb kg71L-1 50 71 6.6 3.5 89 200 7.5 5.695L-1 70 95 8.8 3.5 89 200 10 7.5 290 7366 73 1854 89 2261 164 4166 10500 476271L-2 70 71 6.6 3.5 89 200 10 7.5 250 6350 82 2083 89 2261 164 4166 11000 498995L-2 70 95 8.8 3.5 89 200 10 7.5 290 7366 85 2159 89 2261 164 4166 12500 5669
71L-3 70 71 6.6 3.5 89 200 10 7.5 244 6198 76 1930 89 2261 164 4166 13000 5896
Principal Dimensions
A. Overall LengthAPEX™Model
Number
Motor
hp kW
DriveHeadSeries
APEX™ Screener Models - 30" x 42" (762mm x 1067mm) Panels
Total Nominal Area
Number of Screen
SurfacesD. Installation WidthB. Overall Height C. Base Width Shipping Weight
Screen Motion
Stroke
Contact Rotex
Number of Screen
Surfaces
APEX™Model
Number
DriveHeadSeries
Total Nominal Area
* indicates access from one side only.
Motor
† indicates two deck independently fed ("stacked") design.
Principal Dimensions
Shipping WeightStroke
hp kWA. Overall Length B. Overall Height C. Base Width D. Installation Width
Screen Motion
Apex screener models - 30” x 42” (762mm x 1067mm) panels
Apex screener models - 38” x 45” (965mm x 1143mm) panels
1
2
34
123
Apex screeners are production screening machines for separating dry materials according to particle size. Through their unique gyratory-reciprocating motion, near horizontal screen surface and unique positive screen mesh cleaning system, the Apex provides unusually high e�ciency and capacity.
Rotex Apex Screener - Material Flow Through Machine
Global Headquarters | 1230 Knowlton Street | Cincinnati, OH 45223 | Tel: (513) 541 1236 | Email: [email protected]
www.rotex.com
.
No ofScreen
Surfaces
1
2
3
4
5
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
Nom. AreaPer Screen
SurfaceSq. Meter
Strokemm
RPM KW RPM A B C D
ShippingWeight
Kg
Screen Motion Motor Principal dimensions - mm
The speci�cations listed below are based upon a Apex Screener of standard construction ranging from a single screen model (2 grades - 1 seperation) to a 5 screen model (6 grades - 5 seperations). Drawings are representative of ROTEX model, but overall dimensions may vary depending on the mounting method and drive head used.
Rotex Apex Screener
Incoming Material
Fines Product Overs
The new APEX screener is designed for e�cient performance, quick and easy maintenance / cleaning and increased process “up-time” within your production line
E�cient Performance, Ergonomic Design, Rotex Quality
Bene�ts
Why Application and Process Engineers Choose Apex Screeners
Ease of operation, low maintenance cost, years of trouble-free operation
Classic low angle, long stroke, Rotex gyratory-reciprocating motion creates most e�cient screening environment
Built by experienced, knowledgeable application engineers who understand your product
Ergonomic design enables single operator/maintenance e�ciency
Rotex Screeners o�er peace of mind
Proven Rotex gyratory reciprocating motion for unmatched product recovery e�ciency and increased pro�ts
Increased capacity and decreased operating costs in the same footprint
Available with or without aspiration for additional cleaning capabilities
Designed for reduced downtime, ease of maintenance and quick screen replacements
Proven rugged, long-lasting and versatile screener used in countless applications throughout the world for decades
Apex
Screener
PR
OD
UC
T S
HE
ET
| AP
EX
SC
RE
EN
ER
™
™P
RO
DU
CT
SH
EE
T | A
PE
X S
CR
EE
NE
R™
PR
OD
UC
T S
HE
ET
|
AP
EX
S
CR
EE
NE
R™
PR
OD
UC
T S
HE
ET
|
AP
EX
S
CR
EE
NE
R™
™ Rotex Apex Screener ™
Ergonomic DesignLarge doors on the side of the machine allow easy access which results in screen changes of less than 2 minutes per panel with a 1 man operation
Financial Advantage
Reduced labor costs – one person operation
Reduced down time – ergonomic design enables faster screen changes with a single operator
Improved Quality – the proven superiority of low angle, long stroke gyratory-reciprocating motion increases the amount of separated product you can sell
Increased Capacity – multiple machine sizes and con�guration enable you to customise capacity for your application and space requirements
Rugged, time-proven construction means this machine will support your process for many, many years to come
ROTEX Screeners produce the highest yields of consistent on-spec product with minimum rejection of good material.
Positive Screen CleaningBouncing balls keep screen openings clear, maintaining e�ciency and capacity
Ergonomic DesignNew side access doors enable changes in less than two minutes per panel
Quick Release CamsLift cams and positive sealing
.Sealing StripsComponents are sealed using continuous sealing strips for separation of screen decks
Reduced MaintenanceEasy access to discharge units and external drive unit reduces maintenance time with a 1 man operation
The Apex screener provides lower operating costs and higher productivity to increase your ROI
Speed
ft2 m2 in. mm rpm in. mm in. mm in. mm in. mm lb kg9-1* 30 9 0.8 2.5 64 252 2 1.5 91 2311 44 1118 36 914 67 1702 1700 77118-1* 30 18 1.7 2.5 64 252 2 1.5 143 3632 47 1194 36 914 69 1753 2000 90735-1 80 35 3.3 3 76 216 3 2.2 150 3810 55 1397 60 1524 132 3353 3800 1723
35C-1†* 80 35 3.3 3 76 216 3 2.2 150 3810 72 1829 36 914 68 1727 4100 185955-1 80 55 5.1 3 76 216 5 3.7 195 4953 58 1473 60 1524 132 3353 4500 2041
70-1 † 50 70 6.5 3.5 89 200 7.5 5.6 174 4420 79 2007 60 1524 132 3353 6900 3129110-1 † 70 110 10.2 3.5 89 200 10 7.5 222 5639 81 2057 73 1854 132 3353 10500 4762
9-2* 30 9 0.8 2.5 64 252 2 1.5 109 2769 50 1270 36 914 67 1702 1800 81618-2* 80 18 1.7 3 76 216 3 2.2 156 3962 60 1524 36 914 69 1753 3500 158735-2 80 35 3.3 3 76 216 5 3.7 172 4369 62 1575 60 1524 132 3353 4400 199555-2 50 55 5.1 3.5 89 200 7.5 5.6 214 5436 70 1778 60 1524 132 3353 7200 3265
70-2 † 70 70 6.5 3.5 89 200 10 7.5 185 4699 90 2286 73 1854 132 3353 11000 4989110-2 † 70 110 10.2 3.5 89 200 10 7.5 231 5867 94 2388 73 1854 132 3353 13500 612218-3* 80 18 1.7 3 76 216 3 2.2 159 4039 68 1727 36 914 69 1753 3800 172335-3 50 35 3.3 3.5 89 200 7.5 5.6 177 4496 73 1854 60 1524 132 3353 7000 317555-3 70 55 5.1 3.5 89 200 10 7.5 234 5944 75 1905 73 1854 132 3353 10500 4762
55-4 70 55 5.1 3.5 89 200 10 7.5 234 5944 86 2184 73 1854 132 3353 13500 6122
Speed
ft2 m2 in. mm rpm in. mm in. mm in. mm in. mm lb kg71L-1 50 71 6.6 3.5 89 200 7.5 5.695L-1 70 95 8.8 3.5 89 200 10 7.5 290 7366 73 1854 89 2261 164 4166 10500 476271L-2 70 71 6.6 3.5 89 200 10 7.5 250 6350 82 2083 89 2261 164 4166 11000 498995L-2 70 95 8.8 3.5 89 200 10 7.5 290 7366 85 2159 89 2261 164 4166 12500 5669
71L-3 70 71 6.6 3.5 89 200 10 7.5 244 6198 76 1930 89 2261 164 4166 13000 5896
Principal Dimensions
A. Overall LengthAPEX™Model
Number
Motor
hp kW
DriveHeadSeries
APEX™ Screener Models - 30" x 42" (762mm x 1067mm) Panels
Total Nominal Area
Number of Screen
SurfacesD. Installation WidthB. Overall Height C. Base Width Shipping Weight
Screen Motion
Stroke
Contact Rotex
Number of Screen
Surfaces
APEX™Model
Number
DriveHeadSeries
Total Nominal Area
* indicates access from one side only.
Motor
† indicates two deck independently fed ("stacked") design.
Principal Dimensions
Shipping WeightStroke
hp kWA. Overall Length B. Overall Height C. Base Width D. Installation Width
Screen Motion
Apex screener models - 30” x 42” (762mm x 1067mm) panels
Apex screener models - 38” x 45” (965mm x 1143mm) panels
1
2
34
123
Apex screeners are production screening machines for separating dry materials according to particle size. Through their unique gyratory-reciprocating motion, near horizontal screen surface and unique positive screen mesh cleaning system, the Apex provides unusually high e�ciency and capacity.
Rotex Apex Screener - Material Flow Through Machine
Global Headquarters | 1230 Knowlton Street | Cincinnati, OH 45223 | Tel: (513) 541 1236 | Email: [email protected]
www.rotex.com
.
No ofScreen
Surfaces
1
2
3
4
5
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
Nom. AreaPer Screen
SurfaceSq. Meter
Strokemm
RPM KW RPM A B C D
ShippingWeight
Kg
Screen Motion Motor Principal dimensions - mm
The speci�cations listed below are based upon a Apex Screener of standard construction ranging from a single screen model (2 grades - 1 seperation) to a 5 screen model (6 grades - 5 seperations). Drawings are representative of ROTEX model, but overall dimensions may vary depending on the mounting method and drive head used.
Rotex Apex Screener
Incoming Material
Fines Product Overs
The new APEX screener is designed for e�cient performance, quick and easy maintenance / cleaning and increased process “up-time” within your production line
E�cient Performance, Ergonomic Design, Rotex Quality
Bene�ts
Why Application and Process Engineers Choose Apex Screeners
Ease of operation, low maintenance cost, years of trouble-free operation
Classic low angle, long stroke, Rotex gyratory-reciprocating motion creates most e�cient screening environment
Built by experienced, knowledgeable application engineers who understand your product
Ergonomic design enables single operator/maintenance e�ciency
Rotex Screeners o�er peace of mind
Proven Rotex gyratory reciprocating motion for unmatched product recovery e�ciency and increased pro�ts
Increased capacity and decreased operating costs in the same footprint
Available with or without aspiration for additional cleaning capabilities
Designed for reduced downtime, ease of maintenance and quick screen replacements
Proven rugged, long-lasting and versatile screener used in countless applications throughout the world for decades
Apex
Screener
PR
OD
UC
T S
HE
ET
| AP
EX
SC
RE
EN
ER
™
™P
RO
DU
CT
SH
EE
T | A
PE
X S
CR
EE
NE
R™
PR
OD
UC
T S
HE
ET
|
AP
EX
S
CR
EE
NE
R™
PR
OD
UC
T S
HE
ET
|
AP
EX
S
CR
EE
NE
R™
™ Rotex Apex Screener ™
Ergonomic DesignLarge doors on the side of the machine allow easy access which results in screen changes of less than 2 minutes per panel with a 1 man operation
Financial Advantage
Reduced labor costs – one person operation
Reduced down time – ergonomic design enables faster screen changes with a single operator
Improved Quality – the proven superiority of low angle, long stroke gyratory-reciprocating motion increases the amount of separated product you can sell
Increased Capacity – multiple machine sizes and con�guration enable you to customise capacity for your application and space requirements
Rugged, time-proven construction means this machine will support your process for many, many years to come
ROTEX Screeners produce the highest yields of consistent on-spec product with minimum rejection of good material.
Positive Screen CleaningBouncing balls keep screen openings clear, maintaining e�ciency and capacity
Ergonomic DesignNew side access doors enable changes in less than two minutes per panel
Quick Release CamsLift cams and positive sealing
.Sealing StripsComponents are sealed using continuous sealing strips for separation of screen decks
Reduced MaintenanceEasy access to discharge units and external drive unit reduces maintenance time with a 1 man operation
The Apex screener provides lower operating costs and higher productivity to increase your ROI
Speed
ft2 m2 in. mm rpm in. mm in. mm in. mm in. mm lb kg9-1* 30 9 0.8 2.5 64 252 2 1.5 91 2311 44 1118 36 914 67 1702 1700 77118-1* 30 18 1.7 2.5 64 252 2 1.5 143 3632 47 1194 36 914 69 1753 2000 90735-1 80 35 3.3 3 76 216 3 2.2 150 3810 55 1397 60 1524 132 3353 3800 1723
35C-1†* 80 35 3.3 3 76 216 3 2.2 150 3810 72 1829 36 914 68 1727 4100 185955-1 80 55 5.1 3 76 216 5 3.7 195 4953 58 1473 60 1524 132 3353 4500 2041
70-1 † 50 70 6.5 3.5 89 200 7.5 5.6 174 4420 79 2007 60 1524 132 3353 6900 3129110-1 † 70 110 10.2 3.5 89 200 10 7.5 222 5639 81 2057 73 1854 132 3353 10500 4762
9-2* 30 9 0.8 2.5 64 252 2 1.5 109 2769 50 1270 36 914 67 1702 1800 81618-2* 80 18 1.7 3 76 216 3 2.2 156 3962 60 1524 36 914 69 1753 3500 158735-2 80 35 3.3 3 76 216 5 3.7 172 4369 62 1575 60 1524 132 3353 4400 199555-2 50 55 5.1 3.5 89 200 7.5 5.6 214 5436 70 1778 60 1524 132 3353 7200 3265
70-2 † 70 70 6.5 3.5 89 200 10 7.5 185 4699 90 2286 73 1854 132 3353 11000 4989110-2 † 70 110 10.2 3.5 89 200 10 7.5 231 5867 94 2388 73 1854 132 3353 13500 612218-3* 80 18 1.7 3 76 216 3 2.2 159 4039 68 1727 36 914 69 1753 3800 172335-3 50 35 3.3 3.5 89 200 7.5 5.6 177 4496 73 1854 60 1524 132 3353 7000 317555-3 70 55 5.1 3.5 89 200 10 7.5 234 5944 75 1905 73 1854 132 3353 10500 4762
55-4 70 55 5.1 3.5 89 200 10 7.5 234 5944 86 2184 73 1854 132 3353 13500 6122
Speed
ft2 m2 in. mm rpm in. mm in. mm in. mm in. mm lb kg71L-1 50 71 6.6 3.5 89 200 7.5 5.695L-1 70 95 8.8 3.5 89 200 10 7.5 290 7366 73 1854 89 2261 164 4166 10500 476271L-2 70 71 6.6 3.5 89 200 10 7.5 250 6350 82 2083 89 2261 164 4166 11000 498995L-2 70 95 8.8 3.5 89 200 10 7.5 290 7366 85 2159 89 2261 164 4166 12500 5669
71L-3 70 71 6.6 3.5 89 200 10 7.5 244 6198 76 1930 89 2261 164 4166 13000 5896
Principal Dimensions
A. Overall LengthAPEX™Model
Number
Motor
hp kW
DriveHeadSeries
APEX™ Screener Models - 30" x 42" (762mm x 1067mm) Panels
Total Nominal Area
Number of Screen
SurfacesD. Installation WidthB. Overall Height C. Base Width Shipping Weight
Screen Motion
Stroke
Contact Rotex
Number of Screen
Surfaces
APEX™Model
Number
DriveHeadSeries
Total Nominal Area
* indicates access from one side only.
Motor
† indicates two deck independently fed ("stacked") design.
Principal Dimensions
Shipping WeightStroke
hp kWA. Overall Length B. Overall Height C. Base Width D. Installation Width
Screen Motion
Apex screener models - 30” x 42” (762mm x 1067mm) panels
Apex screener models - 38” x 45” (965mm x 1143mm) panels
1
2
34
123
Apex screeners are production screening machines for separating dry materials according to particle size. Through their unique gyratory-reciprocating motion, near horizontal screen surface and unique positive screen mesh cleaning system, the Apex provides unusually high e�ciency and capacity.
Rotex Apex Screener - Material Flow Through Machine
Global Headquarters | 1230 Knowlton Street | Cincinnati, OH 45223 | Tel: (513) 541 1236 | Email: [email protected]
www.rotex.com
.
No ofScreen
Surfaces
1
2
3
4
5
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
Nom. AreaPer Screen
SurfaceSq. Meter
Strokemm
RPM KW RPM A B C D
ShippingWeight
Kg
Screen Motion Motor Principal dimensions - mm
The speci�cations listed below are based upon a Apex Screener of standard construction ranging from a single screen model (2 grades - 1 seperation) to a 5 screen model (6 grades - 5 seperations). Drawings are representative of ROTEX model, but overall dimensions may vary depending on the mounting method and drive head used.
Rotex Apex Screener
Incoming Material
Fines Product Overs
The new APEX screener is designed for e�cient performance, quick and easy maintenance / cleaning and increased process “up-time” within your production line
E�cient Performance, Ergonomic Design, Rotex Quality
Bene�ts
Why Application and Process Engineers Choose Apex Screeners
Ease of operation, low maintenance cost, years of trouble-free operation
Classic low angle, long stroke, Rotex gyratory-reciprocating motion creates most e�cient screening environment
Built by experienced, knowledgeable application engineers who understand your product
Ergonomic design enables single operator/maintenance e�ciency
Rotex Screeners o�er peace of mind
Proven Rotex gyratory reciprocating motion for unmatched product recovery e�ciency and increased pro�ts
Increased capacity and decreased operating costs in the same footprint
Available with or without aspiration for additional cleaning capabilities
Designed for reduced downtime, ease of maintenance and quick screen replacements
Proven rugged, long-lasting and versatile screener used in countless applications throughout the world for decades
Apex
Screener
PR
OD
UC
T S
HE
ET
| AP
EX
SC
RE
EN
ER
™
™P
RO
DU
CT
SH
EE
T | A
PE
X S
CR
EE
NE
R™
PR
OD
UC
T S
HE
ET
|
AP
EX
S
CR
EE
NE
R™
PR
OD
UC
T S
HE
ET
|
AP
EX
S
CR
EE
NE
R™
™ Rotex Apex Screener ™
Ergonomic DesignLarge doors on the side of the machine allow easy access which results in screen changes of less than 2 minutes per panel with a 1 man operation
Financial Advantage
Reduced labor costs – one person operation
Reduced down time – ergonomic design enables faster screen changes with a single operator
Improved Quality – the proven superiority of low angle, long stroke gyratory-reciprocating motion increases the amount of separated product you can sell
Increased Capacity – multiple machine sizes and con�guration enable you to customise capacity for your application and space requirements
Rugged, time-proven construction means this machine will support your process for many, many years to come
ROTEX Screeners produce the highest yields of consistent on-spec product with minimum rejection of good material.
Positive Screen CleaningBouncing balls keep screen openings clear, maintaining e�ciency and capacity
Ergonomic DesignNew side access doors enable changes in less than two minutes per panel
Quick Release CamsLift cams and positive sealing
.Sealing StripsComponents are sealed using continuous sealing strips for separation of screen decks
Reduced MaintenanceEasy access to discharge units and external drive unit reduces maintenance time with a 1 man operation
The Apex screener provides lower operating costs and higher productivity to increase your ROI
Speed
ft2 m2 in. mm rpm in. mm in. mm in. mm in. mm lb kg9-1* 30 9 0.8 2.5 64 252 2 1.5 91 2311 44 1118 36 914 67 1702 1700 77118-1* 30 18 1.7 2.5 64 252 2 1.5 143 3632 47 1194 36 914 69 1753 2000 90735-1 80 35 3.3 3 76 216 3 2.2 150 3810 55 1397 60 1524 132 3353 3800 1723
35C-1†* 80 35 3.3 3 76 216 3 2.2 150 3810 72 1829 36 914 68 1727 4100 185955-1 80 55 5.1 3 76 216 5 3.7 195 4953 58 1473 60 1524 132 3353 4500 2041
70-1 † 50 70 6.5 3.5 89 200 7.5 5.6 174 4420 79 2007 60 1524 132 3353 6900 3129110-1 † 70 110 10.2 3.5 89 200 10 7.5 222 5639 81 2057 73 1854 132 3353 10500 4762
9-2* 30 9 0.8 2.5 64 252 2 1.5 109 2769 50 1270 36 914 67 1702 1800 81618-2* 80 18 1.7 3 76 216 3 2.2 156 3962 60 1524 36 914 69 1753 3500 158735-2 80 35 3.3 3 76 216 5 3.7 172 4369 62 1575 60 1524 132 3353 4400 199555-2 50 55 5.1 3.5 89 200 7.5 5.6 214 5436 70 1778 60 1524 132 3353 7200 3265
70-2 † 70 70 6.5 3.5 89 200 10 7.5 185 4699 90 2286 73 1854 132 3353 11000 4989110-2 † 70 110 10.2 3.5 89 200 10 7.5 231 5867 94 2388 73 1854 132 3353 13500 612218-3* 80 18 1.7 3 76 216 3 2.2 159 4039 68 1727 36 914 69 1753 3800 172335-3 50 35 3.3 3.5 89 200 7.5 5.6 177 4496 73 1854 60 1524 132 3353 7000 317555-3 70 55 5.1 3.5 89 200 10 7.5 234 5944 75 1905 73 1854 132 3353 10500 4762
55-4 70 55 5.1 3.5 89 200 10 7.5 234 5944 86 2184 73 1854 132 3353 13500 6122
Speed
ft2 m2 in. mm rpm in. mm in. mm in. mm in. mm lb kg71L-1 50 71 6.6 3.5 89 200 7.5 5.695L-1 70 95 8.8 3.5 89 200 10 7.5 290 7366 73 1854 89 2261 164 4166 10500 476271L-2 70 71 6.6 3.5 89 200 10 7.5 250 6350 82 2083 89 2261 164 4166 11000 498995L-2 70 95 8.8 3.5 89 200 10 7.5 290 7366 85 2159 89 2261 164 4166 12500 5669
71L-3 70 71 6.6 3.5 89 200 10 7.5 244 6198 76 1930 89 2261 164 4166 13000 5896
Principal Dimensions
A. Overall LengthAPEX™Model
Number
Motor
hp kW
DriveHeadSeries
APEX™ Screener Models - 30" x 42" (762mm x 1067mm) Panels
Total Nominal Area
Number of Screen
SurfacesD. Installation WidthB. Overall Height C. Base Width Shipping Weight
Screen Motion
Stroke
Contact Rotex
Number of Screen
Surfaces
APEX™Model
Number
DriveHeadSeries
Total Nominal Area
* indicates access from one side only.
Motor
† indicates two deck independently fed ("stacked") design.
Principal Dimensions
Shipping WeightStroke
hp kWA. Overall Length B. Overall Height C. Base Width D. Installation Width
Screen Motion
Apex screener models - 30” x 42” (762mm x 1067mm) panels
Apex screener models - 38” x 45” (965mm x 1143mm) panels
1
2
34
123
Apex screeners are production screening machines for separating dry materials according to particle size. Through their unique gyratory-reciprocating motion, near horizontal screen surface and unique positive screen mesh cleaning system, the Apex provides unusually high e�ciency and capacity.
Rotex Apex Screener - Material Flow Through Machine
Global Headquarters | 1230 Knowlton Street | Cincinnati, OH 45223 | Tel: (513) 541 1236 | Email: [email protected]
www.rotex.com
.
No ofScreen
Surfaces
1
2
3
4
5
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
Nom. AreaPer Screen
SurfaceSq. Meter
Strokemm
RPM KW RPM A B C D
ShippingWeight
Kg
Screen Motion Motor Principal dimensions - mm
The speci�cations listed below are based upon a Apex Screener of standard construction ranging from a single screen model (2 grades - 1 seperation) to a 5 screen model (6 grades - 5 seperations). Drawings are representative of ROTEX model, but overall dimensions may vary depending on the mounting method and drive head used.
Rotex Apex Screener
Incoming Material
Fines Product Overs
The new APEX screener is designed for e�cient performance, quick and easy maintenance / cleaning and increased process “up-time” within your production line
E�cient Performance, Ergonomic Design, Rotex Quality
Bene�ts
Why Application and Process Engineers Choose Apex Screeners
Ease of operation, low maintenance cost, years of trouble-free operation
Classic low angle, long stroke, Rotex gyratory-reciprocating motion creates most e�cient screening environment
Built by experienced, knowledgeable application engineers who understand your product
Ergonomic design enables single operator/maintenance e�ciency
Rotex Screeners o�er peace of mind
Proven Rotex gyratory reciprocating motion for unmatched product recovery e�ciency and increased pro�ts
Increased capacity and decreased operating costs in the same footprint
Available with or without aspiration for additional cleaning capabilities
Designed for reduced downtime, ease of maintenance and quick screen replacements
Proven rugged, long-lasting and versatile screener used in countless applications throughout the world for decades
Apex
Screener
PR
OD
UC
T S
HE
ET
| AP
EX
SC
RE
EN
ER
™
™P
RO
DU
CT
SH
EE
T | A
PE
X S
CR
EE
NE
R™
PR
OD
UC
T S
HE
ET
|
AP
EX
S
CR
EE
NE
R™
PR
OD
UC
T S
HE
ET
|
AP
EX
S
CR
EE
NE
R™
™ Rotex Apex Screener ™
Ergonomic DesignLarge doors on the side of the machine allow easy access which results in screen changes of less than 2 minutes per panel with a 1 man operation
Financial Advantage
Reduced labor costs – one person operation
Reduced down time – ergonomic design enables faster screen changes with a single operator
Improved Quality – the proven superiority of low angle, long stroke gyratory-reciprocating motion increases the amount of separated product you can sell
Increased Capacity – multiple machine sizes and con�guration enable you to customise capacity for your application and space requirements
Rugged, time-proven construction means this machine will support your process for many, many years to come
ROTEX Screeners produce the highest yields of consistent on-spec product with minimum rejection of good material.
Positive Screen CleaningBouncing balls keep screen openings clear, maintaining e�ciency and capacity
Ergonomic DesignNew side access doors enable changes in less than two minutes per panel
Quick Release CamsLift cams and positive sealing
.Sealing StripsComponents are sealed using continuous sealing strips for separation of screen decks
Reduced MaintenanceEasy access to discharge units and external drive unit reduces maintenance time with a 1 man operation
The Apex screener provides lower operating costs and higher productivity to increase your ROI
Speed
ft2 m2 in. mm rpm in. mm in. mm in. mm in. mm lb kg9-1* 30 9 0.8 2.5 64 252 2 1.5 91 2311 44 1118 36 914 67 1702 1700 77118-1* 30 18 1.7 2.5 64 252 2 1.5 143 3632 47 1194 36 914 69 1753 2000 90735-1 80 35 3.3 3 76 216 3 2.2 150 3810 55 1397 60 1524 132 3353 3800 1723
35C-1†* 80 35 3.3 3 76 216 3 2.2 150 3810 72 1829 36 914 68 1727 4100 185955-1 80 55 5.1 3 76 216 5 3.7 195 4953 58 1473 60 1524 132 3353 4500 2041
70-1 † 50 70 6.5 3.5 89 200 7.5 5.6 174 4420 79 2007 60 1524 132 3353 6900 3129110-1 † 70 110 10.2 3.5 89 200 10 7.5 222 5639 81 2057 73 1854 132 3353 10500 4762
9-2* 30 9 0.8 2.5 64 252 2 1.5 109 2769 50 1270 36 914 67 1702 1800 81618-2* 80 18 1.7 3 76 216 3 2.2 156 3962 60 1524 36 914 69 1753 3500 158735-2 80 35 3.3 3 76 216 5 3.7 172 4369 62 1575 60 1524 132 3353 4400 199555-2 50 55 5.1 3.5 89 200 7.5 5.6 214 5436 70 1778 60 1524 132 3353 7200 3265
70-2 † 70 70 6.5 3.5 89 200 10 7.5 185 4699 90 2286 73 1854 132 3353 11000 4989110-2 † 70 110 10.2 3.5 89 200 10 7.5 231 5867 94 2388 73 1854 132 3353 13500 612218-3* 80 18 1.7 3 76 216 3 2.2 159 4039 68 1727 36 914 69 1753 3800 172335-3 50 35 3.3 3.5 89 200 7.5 5.6 177 4496 73 1854 60 1524 132 3353 7000 317555-3 70 55 5.1 3.5 89 200 10 7.5 234 5944 75 1905 73 1854 132 3353 10500 4762
55-4 70 55 5.1 3.5 89 200 10 7.5 234 5944 86 2184 73 1854 132 3353 13500 6122
Speed
ft2 m2 in. mm rpm in. mm in. mm in. mm in. mm lb kg71L-1 50 71 6.6 3.5 89 200 7.5 5.695L-1 70 95 8.8 3.5 89 200 10 7.5 290 7366 73 1854 89 2261 164 4166 10500 476271L-2 70 71 6.6 3.5 89 200 10 7.5 250 6350 82 2083 89 2261 164 4166 11000 498995L-2 70 95 8.8 3.5 89 200 10 7.5 290 7366 85 2159 89 2261 164 4166 12500 5669
71L-3 70 71 6.6 3.5 89 200 10 7.5 244 6198 76 1930 89 2261 164 4166 13000 5896
Principal Dimensions
A. Overall LengthAPEX™Model
Number
Motor
hp kW
DriveHeadSeries
APEX™ Screener Models - 30" x 42" (762mm x 1067mm) Panels
Total Nominal Area
Number of Screen
SurfacesD. Installation WidthB. Overall Height C. Base Width Shipping Weight
Screen Motion
Stroke
Contact Rotex
Number of Screen
Surfaces
APEX™Model
Number
DriveHeadSeries
Total Nominal Area
* indicates access from one side only.
Motor
† indicates two deck independently fed ("stacked") design.
Principal Dimensions
Shipping WeightStroke
hp kWA. Overall Length B. Overall Height C. Base Width D. Installation Width
Screen Motion
Apex screener models - 30” x 42” (762mm x 1067mm) panels
Apex screener models - 38” x 45” (965mm x 1143mm) panels
1
2
34
123
Apex screeners are production screening machines for separating dry materials according to particle size. Through their unique gyratory-reciprocating motion, near horizontal screen surface and unique positive screen mesh cleaning system, the Apex provides unusually high e�ciency and capacity.
Rotex Apex Screener - Material Flow Through Machine
Global Headquarters | 1230 Knowlton Street | Cincinnati, OH 45223 | Tel: (513) 541 1236 | Email: [email protected]
www.rotex.com
.
No ofScreen
Surfaces
1
2
3
4
5
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
Nom. AreaPer Screen
SurfaceSq. Meter
Strokemm
RPM KW RPM A B C D
ShippingWeight
Kg
Screen Motion Motor Principal dimensions - mm
The speci�cations listed below are based upon a Apex Screener of standard construction ranging from a single screen model (2 grades - 1 seperation) to a 5 screen model (6 grades - 5 seperations). Drawings are representative of ROTEX model, but overall dimensions may vary depending on the mounting method and drive head used.
Rotex Apex Screener
Incoming Material
Fines Product Overs
The new APEX screener is designed for e�cient performance, quick and easy maintenance / cleaning and increased process “up-time” within your production line
E�cient Performance, Ergonomic Design, Rotex Quality
Bene�ts
Why Application and Process Engineers Choose Apex Screeners
Ease of operation, low maintenance cost, years of trouble-free operation
Classic low angle, long stroke, Rotex gyratory-reciprocating motion creates most e�cient screening environment
Built by experienced, knowledgeable application engineers who understand your product
Ergonomic design enables single operator/maintenance e�ciency
Rotex Screeners o�er peace of mind
Proven Rotex gyratory reciprocating motion for unmatched product recovery e�ciency and increased pro�ts
Increased capacity and decreased operating costs in the same footprint
Available with or without aspiration for additional cleaning capabilities
Designed for reduced downtime, ease of maintenance and quick screen replacements
Proven rugged, long-lasting and versatile screener used in countless applications throughout the world for decades
Apex
Screener
PR
OD
UC
T S
HE
ET
| AP
EX
SC
RE
EN
ER
™
™P
RO
DU
CT
SH
EE
T | A
PE
X S
CR
EE
NE
R™
PR
OD
UC
T S
HE
ET
|
AP
EX
S
CR
EE
NE
R™
PR
OD
UC
T S
HE
ET
|
AP
EX
S
CR
EE
NE
R™
™ Rotex Apex Screener ™
Ergonomic DesignLarge doors on the side of the machine allow easy access which results in screen changes of less than 2 minutes per panel with a 1 man operation
Financial Advantage
Reduced labor costs – one person operation
Reduced down time – ergonomic design enables faster screen changes with a single operator
Improved Quality – the proven superiority of low angle, long stroke gyratory-reciprocating motion increases the amount of separated product you can sell
Increased Capacity – multiple machine sizes and con�guration enable you to customise capacity for your application and space requirements
Rugged, time-proven construction means this machine will support your process for many, many years to come
ROTEX Screeners produce the highest yields of consistent on-spec product with minimum rejection of good material.
Positive Screen CleaningBouncing balls keep screen openings clear, maintaining e�ciency and capacity
Ergonomic DesignNew side access doors enable changes in less than two minutes per panel
Quick Release CamsLift cams and positive sealing
.Sealing StripsComponents are sealed using continuous sealing strips for separation of screen decks
Reduced MaintenanceEasy access to discharge units and external drive unit reduces maintenance time with a 1 man operation
The Apex screener provides lower operating costs and higher productivity to increase your ROI
Speed
ft2 m2 in. mm rpm in. mm in. mm in. mm in. mm lb kg9-1* 30 9 0.8 2.5 64 252 2 1.5 91 2311 44 1118 36 914 67 1702 1700 77118-1* 30 18 1.7 2.5 64 252 2 1.5 143 3632 47 1194 36 914 69 1753 2000 90735-1 80 35 3.3 3 76 216 3 2.2 150 3810 55 1397 60 1524 132 3353 3800 1723
35C-1†* 80 35 3.3 3 76 216 3 2.2 150 3810 72 1829 36 914 68 1727 4100 185955-1 80 55 5.1 3 76 216 5 3.7 195 4953 58 1473 60 1524 132 3353 4500 2041
70-1 † 50 70 6.5 3.5 89 200 7.5 5.6 174 4420 79 2007 60 1524 132 3353 6900 3129110-1 † 70 110 10.2 3.5 89 200 10 7.5 222 5639 81 2057 73 1854 132 3353 10500 4762
9-2* 30 9 0.8 2.5 64 252 2 1.5 109 2769 50 1270 36 914 67 1702 1800 81618-2* 80 18 1.7 3 76 216 3 2.2 156 3962 60 1524 36 914 69 1753 3500 158735-2 80 35 3.3 3 76 216 5 3.7 172 4369 62 1575 60 1524 132 3353 4400 199555-2 50 55 5.1 3.5 89 200 7.5 5.6 214 5436 70 1778 60 1524 132 3353 7200 3265
70-2 † 70 70 6.5 3.5 89 200 10 7.5 185 4699 90 2286 73 1854 132 3353 11000 4989110-2 † 70 110 10.2 3.5 89 200 10 7.5 231 5867 94 2388 73 1854 132 3353 13500 612218-3* 80 18 1.7 3 76 216 3 2.2 159 4039 68 1727 36 914 69 1753 3800 172335-3 50 35 3.3 3.5 89 200 7.5 5.6 177 4496 73 1854 60 1524 132 3353 7000 317555-3 70 55 5.1 3.5 89 200 10 7.5 234 5944 75 1905 73 1854 132 3353 10500 4762
55-4 70 55 5.1 3.5 89 200 10 7.5 234 5944 86 2184 73 1854 132 3353 13500 6122
Speed
ft2 m2 in. mm rpm in. mm in. mm in. mm in. mm lb kg71L-1 50 71 6.6 3.5 89 200 7.5 5.695L-1 70 95 8.8 3.5 89 200 10 7.5 290 7366 73 1854 89 2261 164 4166 10500 476271L-2 70 71 6.6 3.5 89 200 10 7.5 250 6350 82 2083 89 2261 164 4166 11000 498995L-2 70 95 8.8 3.5 89 200 10 7.5 290 7366 85 2159 89 2261 164 4166 12500 5669
71L-3 70 71 6.6 3.5 89 200 10 7.5 244 6198 76 1930 89 2261 164 4166 13000 5896
Principal Dimensions
A. Overall LengthAPEX™Model
Number
Motor
hp kW
DriveHeadSeries
APEX™ Screener Models - 30" x 42" (762mm x 1067mm) Panels
Total Nominal Area
Number of Screen
SurfacesD. Installation WidthB. Overall Height C. Base Width Shipping Weight
Screen Motion
Stroke
Contact Rotex
Number of Screen
Surfaces
APEX™Model
Number
DriveHeadSeries
Total Nominal Area
* indicates access from one side only.
Motor
† indicates two deck independently fed ("stacked") design.
Principal Dimensions
Shipping WeightStroke
hp kWA. Overall Length B. Overall Height C. Base Width D. Installation Width
Screen Motion
Apex screener models - 30” x 42” (762mm x 1067mm) panels
Apex screener models - 38” x 45” (965mm x 1143mm) panels
1
2
34
123
Apex screeners are production screening machines for separating dry materials according to particle size. Through their unique gyratory-reciprocating motion, near horizontal screen surface and unique positive screen mesh cleaning system, the Apex provides unusually high e�ciency and capacity.
Rotex Apex Screener - Material Flow Through Machine
Global Headquarters | 1230 Knowlton Street | Cincinnati, OH 45223 | Tel: (513) 541 1236 | Email: [email protected]
www.rotex.com
.
No ofScreen
Surfaces
1
2
3
4
5
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
Nom. AreaPer Screen
SurfaceSq. Meter
Strokemm
RPM KW RPM A B C D
ShippingWeight
Kg
Screen Motion Motor Principal dimensions - mm
The speci�cations listed below are based upon a Apex Screener of standard construction ranging from a single screen model (2 grades - 1 seperation) to a 5 screen model (6 grades - 5 seperations). Drawings are representative of ROTEX model, but overall dimensions may vary depending on the mounting method and drive head used.
Rotex Apex Screener
Incoming Material
Fines Product Overs
The new APEX screener is designed for e�cient performance, quick and easy maintenance / cleaning and increased process “up-time” within your production line
E�cient Performance, Ergonomic Design, Rotex Quality
Bene�ts
Why Application and Process Engineers Choose Apex Screeners
Ease of operation, low maintenance cost, years of trouble-free operation
Classic low angle, long stroke, Rotex gyratory-reciprocating motion creates most e�cient screening environment
Built by experienced, knowledgeable application engineers who understand your product
Ergonomic design enables single operator/maintenance e�ciency
Rotex Screeners o�er peace of mind
Proven Rotex gyratory reciprocating motion for unmatched product recovery e�ciency and increased pro�ts
Increased capacity and decreased operating costs in the same footprint
Available with or without aspiration for additional cleaning capabilities
Designed for reduced downtime, ease of maintenance and quick screen replacements
Proven rugged, long-lasting and versatile screener used in countless applications throughout the world for decades
Apex
Screener
PR
OD
UC
T S
HE
ET
| AP
EX
SC
RE
EN
ER
™
™P
RO
DU
CT
SH
EE
T | A
PE
X S
CR
EE
NE
R™
PR
OD
UC
T S
HE
ET
|
AP
EX
S
CR
EE
NE
R™
PR
OD
UC
T S
HE
ET
|
AP
EX
S
CR
EE
NE
R™
™ Rotex Apex Screener ™
Ergonomic DesignLarge doors on the side of the machine allow easy access which results in screen changes of less than 2 minutes per panel with a 1 man operation
Financial Advantage
Reduced labor costs – one person operation
Reduced down time – ergonomic design enables faster screen changes with a single operator
Improved Quality – the proven superiority of low angle, long stroke gyratory-reciprocating motion increases the amount of separated product you can sell
Increased Capacity – multiple machine sizes and con�guration enable you to customise capacity for your application and space requirements
Rugged, time-proven construction means this machine will support your process for many, many years to come
ROTEX Screeners produce the highest yields of consistent on-spec product with minimum rejection of good material.
Positive Screen CleaningBouncing balls keep screen openings clear, maintaining e�ciency and capacity
Ergonomic DesignNew side access doors enable changes in less than two minutes per panel
Quick Release CamsLift cams and positive sealing
.Sealing StripsComponents are sealed using continuous sealing strips for separation of screen decks
Reduced MaintenanceEasy access to discharge units and external drive unit reduces maintenance time with a 1 man operation
The Apex screener provides lower operating costs and higher productivity to increase your ROI
Speed
ft2 m2 in. mm rpm in. mm in. mm in. mm in. mm lb kg9-1* 30 9 0.8 2.5 64 252 2 1.5 91 2311 44 1118 36 914 67 1702 1700 77118-1* 30 18 1.7 2.5 64 252 2 1.5 143 3632 47 1194 36 914 69 1753 2000 90735-1 80 35 3.3 3 76 216 3 2.2 150 3810 55 1397 60 1524 132 3353 3800 1723
35C-1†* 80 35 3.3 3 76 216 3 2.2 150 3810 72 1829 36 914 68 1727 4100 185955-1 80 55 5.1 3 76 216 5 3.7 195 4953 58 1473 60 1524 132 3353 4500 2041
70-1 † 50 70 6.5 3.5 89 200 7.5 5.6 174 4420 79 2007 60 1524 132 3353 6900 3129110-1 † 70 110 10.2 3.5 89 200 10 7.5 222 5639 81 2057 73 1854 132 3353 10500 4762
9-2* 30 9 0.8 2.5 64 252 2 1.5 109 2769 50 1270 36 914 67 1702 1800 81618-2* 80 18 1.7 3 76 216 3 2.2 156 3962 60 1524 36 914 69 1753 3500 158735-2 80 35 3.3 3 76 216 5 3.7 172 4369 62 1575 60 1524 132 3353 4400 199555-2 50 55 5.1 3.5 89 200 7.5 5.6 214 5436 70 1778 60 1524 132 3353 7200 3265
70-2 † 70 70 6.5 3.5 89 200 10 7.5 185 4699 90 2286 73 1854 132 3353 11000 4989110-2 † 70 110 10.2 3.5 89 200 10 7.5 231 5867 94 2388 73 1854 132 3353 13500 612218-3* 80 18 1.7 3 76 216 3 2.2 159 4039 68 1727 36 914 69 1753 3800 172335-3 50 35 3.3 3.5 89 200 7.5 5.6 177 4496 73 1854 60 1524 132 3353 7000 317555-3 70 55 5.1 3.5 89 200 10 7.5 234 5944 75 1905 73 1854 132 3353 10500 4762
55-4 70 55 5.1 3.5 89 200 10 7.5 234 5944 86 2184 73 1854 132 3353 13500 6122
Speed
ft2 m2 in. mm rpm in. mm in. mm in. mm in. mm lb kg71L-1 50 71 6.6 3.5 89 200 7.5 5.695L-1 70 95 8.8 3.5 89 200 10 7.5 290 7366 73 1854 89 2261 164 4166 10500 476271L-2 70 71 6.6 3.5 89 200 10 7.5 250 6350 82 2083 89 2261 164 4166 11000 498995L-2 70 95 8.8 3.5 89 200 10 7.5 290 7366 85 2159 89 2261 164 4166 12500 5669
71L-3 70 71 6.6 3.5 89 200 10 7.5 244 6198 76 1930 89 2261 164 4166 13000 5896
Principal Dimensions
A. Overall LengthAPEX™Model
Number
Motor
hp kW
DriveHeadSeries
APEX™ Screener Models - 30" x 42" (762mm x 1067mm) Panels
Total Nominal Area
Number of Screen
SurfacesD. Installation WidthB. Overall Height C. Base Width Shipping Weight
Screen Motion
Stroke
Contact Rotex
Number of Screen
Surfaces
APEX™Model
Number
DriveHeadSeries
Total Nominal Area
* indicates access from one side only.
Motor
† indicates two deck independently fed ("stacked") design.
Principal Dimensions
Shipping WeightStroke
hp kWA. Overall Length B. Overall Height C. Base Width D. Installation Width
Screen Motion
Apex screener models - 30” x 42” (762mm x 1067mm) panels
Apex screener models - 38” x 45” (965mm x 1143mm) panels
1
2
34
123
Apex screeners are production screening machines for separating dry materials according to particle size. Through their unique gyratory-reciprocating motion, near horizontal screen surface and unique positive screen mesh cleaning system, the Apex provides unusually high e�ciency and capacity.
Rotex Apex Screener - Material Flow Through Machine
Global Headquarters | 1230 Knowlton Street | Cincinnati, OH 45223 | Tel: (513) 541 1236 | Email: [email protected]
www.rotex.com
.
No ofScreen
Surfaces
1
2
3
4
5
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
Nom. AreaPer Screen
SurfaceSq. Meter
Strokemm
RPM KW RPM A B C D
ShippingWeight
Kg
Screen Motion Motor Principal dimensions - mm
The speci�cations listed below are based upon a Apex Screener of standard construction ranging from a single screen model (2 grades - 1 seperation) to a 5 screen model (6 grades - 5 seperations). Drawings are representative of ROTEX model, but overall dimensions may vary depending on the mounting method and drive head used.
Rotex Apex Screener
Incoming Material
Fines Product Overs
The new APEX screener is designed for e�cient performance, quick and easy maintenance / cleaning and increased process “up-time” within your production line
E�cient Performance, Ergonomic Design, Rotex Quality
Bene�ts
Why Application and Process Engineers Choose Apex Screeners
Ease of operation, low maintenance cost, years of trouble-free operation
Classic low angle, long stroke, Rotex gyratory-reciprocating motion creates most e�cient screening environment
Built by experienced, knowledgeable application engineers who understand your product
Ergonomic design enables single operator/maintenance e�ciency
Rotex Screeners o�er peace of mind
Proven Rotex gyratory reciprocating motion for unmatched product recovery e�ciency and increased pro�ts
Increased capacity and decreased operating costs in the same footprint
Available with or without aspiration for additional cleaning capabilities
Designed for reduced downtime, ease of maintenance and quick screen replacements
Proven rugged, long-lasting and versatile screener used in countless applications throughout the world for decades
Apex
Screener
PR
OD
UC
T S
HE
ET
| AP
EX
SC
RE
EN
ER
™
™P
RO
DU
CT
SH
EE
T | A
PE
X S
CR
EE
NE
R™
PR
OD
UC
T S
HE
ET
|
AP
EX
S
CR
EE
NE
R™
PR
OD
UC
T S
HE
ET
|
AP
EX
S
CR
EE
NE
R™
™ Rotex Apex Screener ™
Ergonomic DesignLarge doors on the side of the machine allow easy access which results in screen changes of less than 2 minutes per panel with a 1 man operation
Financial Advantage
Reduced labor costs – one person operation
Reduced down time – ergonomic design enables faster screen changes with a single operator
Improved Quality – the proven superiority of low angle, long stroke gyratory-reciprocating motion increases the amount of separated product you can sell
Increased Capacity – multiple machine sizes and con�guration enable you to customise capacity for your application and space requirements
Rugged, time-proven construction means this machine will support your process for many, many years to come
ROTEX Screeners produce the highest yields of consistent on-spec product with minimum rejection of good material.
Positive Screen CleaningBouncing balls keep screen openings clear, maintaining e�ciency and capacity
Ergonomic DesignNew side access doors enable changes in less than two minutes per panel
Quick Release CamsLift cams and positive sealing
.Sealing StripsComponents are sealed using continuous sealing strips for separation of screen decks
Reduced MaintenanceEasy access to discharge units and external drive unit reduces maintenance time with a 1 man operation
The Apex screener provides lower operating costs and higher productivity to increase your ROI
Speed
ft2 m2 in. mm rpm in. mm in. mm in. mm in. mm lb kg9-1* 30 9 0.8 2.5 64 252 2 1.5 91 2311 44 1118 36 914 67 1702 1700 77118-1* 30 18 1.7 2.5 64 252 2 1.5 143 3632 47 1194 36 914 69 1753 2000 90735-1 80 35 3.3 3 76 216 3 2.2 150 3810 55 1397 60 1524 132 3353 3800 1723
35C-1†* 80 35 3.3 3 76 216 3 2.2 150 3810 72 1829 36 914 68 1727 4100 185955-1 80 55 5.1 3 76 216 5 3.7 195 4953 58 1473 60 1524 132 3353 4500 2041
70-1 † 50 70 6.5 3.5 89 200 7.5 5.6 174 4420 79 2007 60 1524 132 3353 6900 3129110-1 † 70 110 10.2 3.5 89 200 10 7.5 222 5639 81 2057 73 1854 132 3353 10500 4762
9-2* 30 9 0.8 2.5 64 252 2 1.5 109 2769 50 1270 36 914 67 1702 1800 81618-2* 80 18 1.7 3 76 216 3 2.2 156 3962 60 1524 36 914 69 1753 3500 158735-2 80 35 3.3 3 76 216 5 3.7 172 4369 62 1575 60 1524 132 3353 4400 199555-2 50 55 5.1 3.5 89 200 7.5 5.6 214 5436 70 1778 60 1524 132 3353 7200 3265
70-2 † 70 70 6.5 3.5 89 200 10 7.5 185 4699 90 2286 73 1854 132 3353 11000 4989110-2 † 70 110 10.2 3.5 89 200 10 7.5 231 5867 94 2388 73 1854 132 3353 13500 612218-3* 80 18 1.7 3 76 216 3 2.2 159 4039 68 1727 36 914 69 1753 3800 172335-3 50 35 3.3 3.5 89 200 7.5 5.6 177 4496 73 1854 60 1524 132 3353 7000 317555-3 70 55 5.1 3.5 89 200 10 7.5 234 5944 75 1905 73 1854 132 3353 10500 4762
55-4 70 55 5.1 3.5 89 200 10 7.5 234 5944 86 2184 73 1854 132 3353 13500 6122
Speed
ft2 m2 in. mm rpm in. mm in. mm in. mm in. mm lb kg71L-1 50 71 6.6 3.5 89 200 7.5 5.695L-1 70 95 8.8 3.5 89 200 10 7.5 290 7366 73 1854 89 2261 164 4166 10500 476271L-2 70 71 6.6 3.5 89 200 10 7.5 250 6350 82 2083 89 2261 164 4166 11000 498995L-2 70 95 8.8 3.5 89 200 10 7.5 290 7366 85 2159 89 2261 164 4166 12500 5669
71L-3 70 71 6.6 3.5 89 200 10 7.5 244 6198 76 1930 89 2261 164 4166 13000 5896
Principal Dimensions
A. Overall LengthAPEX™Model
Number
Motor
hp kW
DriveHeadSeries
APEX™ Screener Models - 30" x 42" (762mm x 1067mm) Panels
Total Nominal Area
Number of Screen
SurfacesD. Installation WidthB. Overall Height C. Base Width Shipping Weight
Screen Motion
Stroke
Contact Rotex
Number of Screen
Surfaces
APEX™Model
Number
DriveHeadSeries
Total Nominal Area
* indicates access from one side only.
Motor
† indicates two deck independently fed ("stacked") design.
Principal Dimensions
Shipping WeightStroke
hp kWA. Overall Length B. Overall Height C. Base Width D. Installation Width
Screen Motion
Apex screener models - 30” x 42” (762mm x 1067mm) panels
Apex screener models - 38” x 45” (965mm x 1143mm) panels
1
2
34
123
Apex screeners are production screening machines for separating dry materials according to particle size. Through their unique gyratory-reciprocating motion, near horizontal screen surface and unique positive screen mesh cleaning system, the Apex provides unusually high e�ciency and capacity.
Rotex Apex Screener - Material Flow Through Machine
Global Headquarters | 1230 Knowlton Street | Cincinnati, OH 45223 | Tel: (513) 541 1236 | Email: [email protected]
www.rotex.com
.
No ofScreen
Surfaces
1
2
3
4
5
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
Nom. AreaPer Screen
SurfaceSq. Meter
Strokemm
RPM KW RPM A B C D
ShippingWeight
Kg
Screen Motion Motor Principal dimensions - mm
The speci�cations listed below are based upon a Apex Screener of standard construction ranging from a single screen model (2 grades - 1 seperation) to a 5 screen model (6 grades - 5 seperations). Drawings are representative of ROTEX model, but overall dimensions may vary depending on the mounting method and drive head used.
Rotex Apex Screener
Incoming Material
Fines Product Overs
The new APEX screener is designed for e�cient performance, quick and easy maintenance / cleaning and increased process “up-time” within your production line
E�cient Performance, Ergonomic Design, Rotex Quality
Bene�ts
Why Application and Process Engineers Choose Apex Screeners
Ease of operation, low maintenance cost, years of trouble-free operation
Classic low angle, long stroke, Rotex gyratory-reciprocating motion creates most e�cient screening environment
Built by experienced, knowledgeable application engineers who understand your product
Ergonomic design enables single operator/maintenance e�ciency
Rotex Screeners o�er peace of mind
Proven Rotex gyratory reciprocating motion for unmatched product recovery e�ciency and increased pro�ts
Increased capacity and decreased operating costs in the same footprint
Available with or without aspiration for additional cleaning capabilities
Designed for reduced downtime, ease of maintenance and quick screen replacements
Proven rugged, long-lasting and versatile screener used in countless applications throughout the world for decades
Apex
Screener
PR
OD
UC
T S
HE
ET
| AP
EX
SC
RE
EN
ER
™
™P
RO
DU
CT
SH
EE
T | A
PE
X S
CR
EE
NE
R™
PR
OD
UC
T S
HE
ET
|
AP
EX
S
CR
EE
NE
R™
PR
OD
UC
T S
HE
ET
|
AP
EX
S
CR
EE
NE
R™
™ Rotex Apex Screener ™
Ergonomic DesignLarge doors on the side of the machine allow easy access which results in screen changes of less than 2 minutes per panel with a 1 man operation
Financial Advantage
Reduced labor costs – one person operation
Reduced down time – ergonomic design enables faster screen changes with a single operator
Improved Quality – the proven superiority of low angle, long stroke gyratory-reciprocating motion increases the amount of separated product you can sell
Increased Capacity – multiple machine sizes and con�guration enable you to customise capacity for your application and space requirements
Rugged, time-proven construction means this machine will support your process for many, many years to come
ROTEX Screeners produce the highest yields of consistent on-spec product with minimum rejection of good material.
Positive Screen CleaningBouncing balls keep screen openings clear, maintaining e�ciency and capacity
Ergonomic DesignNew side access doors enable changes in less than two minutes per panel
Quick Release CamsLift cams and positive sealing
.Sealing StripsComponents are sealed using continuous sealing strips for separation of screen decks
Reduced MaintenanceEasy access to discharge units and external drive unit reduces maintenance time with a 1 man operation
The Apex screener provides lower operating costs and higher productivity to increase your ROI
Speed
ft2 m2 in. mm rpm in. mm in. mm in. mm in. mm lb kg9-1* 30 9 0.8 2.5 64 252 2 1.5 91 2311 44 1118 36 914 67 1702 1700 77118-1* 30 18 1.7 2.5 64 252 2 1.5 143 3632 47 1194 36 914 69 1753 2000 90735-1 80 35 3.3 3 76 216 3 2.2 150 3810 55 1397 60 1524 132 3353 3800 1723
35C-1†* 80 35 3.3 3 76 216 3 2.2 150 3810 72 1829 36 914 68 1727 4100 185955-1 80 55 5.1 3 76 216 5 3.7 195 4953 58 1473 60 1524 132 3353 4500 2041
70-1 † 50 70 6.5 3.5 89 200 7.5 5.6 174 4420 79 2007 60 1524 132 3353 6900 3129110-1 † 70 110 10.2 3.5 89 200 10 7.5 222 5639 81 2057 73 1854 132 3353 10500 4762
9-2* 30 9 0.8 2.5 64 252 2 1.5 109 2769 50 1270 36 914 67 1702 1800 81618-2* 80 18 1.7 3 76 216 3 2.2 156 3962 60 1524 36 914 69 1753 3500 158735-2 80 35 3.3 3 76 216 5 3.7 172 4369 62 1575 60 1524 132 3353 4400 199555-2 50 55 5.1 3.5 89 200 7.5 5.6 214 5436 70 1778 60 1524 132 3353 7200 3265
70-2 † 70 70 6.5 3.5 89 200 10 7.5 185 4699 90 2286 73 1854 132 3353 11000 4989110-2 † 70 110 10.2 3.5 89 200 10 7.5 231 5867 94 2388 73 1854 132 3353 13500 612218-3* 80 18 1.7 3 76 216 3 2.2 159 4039 68 1727 36 914 69 1753 3800 172335-3 50 35 3.3 3.5 89 200 7.5 5.6 177 4496 73 1854 60 1524 132 3353 7000 317555-3 70 55 5.1 3.5 89 200 10 7.5 234 5944 75 1905 73 1854 132 3353 10500 4762
55-4 70 55 5.1 3.5 89 200 10 7.5 234 5944 86 2184 73 1854 132 3353 13500 6122
Speed
ft2 m2 in. mm rpm in. mm in. mm in. mm in. mm lb kg71L-1 50 71 6.6 3.5 89 200 7.5 5.695L-1 70 95 8.8 3.5 89 200 10 7.5 290 7366 73 1854 89 2261 164 4166 10500 476271L-2 70 71 6.6 3.5 89 200 10 7.5 250 6350 82 2083 89 2261 164 4166 11000 498995L-2 70 95 8.8 3.5 89 200 10 7.5 290 7366 85 2159 89 2261 164 4166 12500 5669
71L-3 70 71 6.6 3.5 89 200 10 7.5 244 6198 76 1930 89 2261 164 4166 13000 5896
Principal Dimensions
A. Overall LengthAPEX™Model
Number
Motor
hp kW
DriveHeadSeries
APEX™ Screener Models - 30" x 42" (762mm x 1067mm) Panels
Total Nominal Area
Number of Screen
SurfacesD. Installation WidthB. Overall Height C. Base Width Shipping Weight
Screen Motion
Stroke
Contact Rotex
Number of Screen
Surfaces
APEX™Model
Number
DriveHeadSeries
Total Nominal Area
* indicates access from one side only.
Motor
† indicates two deck independently fed ("stacked") design.
Principal Dimensions
Shipping WeightStroke
hp kWA. Overall Length B. Overall Height C. Base Width D. Installation Width
Screen Motion
Apex screener models - 30” x 42” (762mm x 1067mm) panels
Apex screener models - 38” x 45” (965mm x 1143mm) panels
1
2
34
123
B
AOverall Length
D C
Ove
rall
Wid
th
Base
Wid
th
Ove
rall
Hei
ght
Apex screeners are production screening machines for separating dry materials according to particle size. Through their unique gyratory-reciprocating motion, near horizontal screen surface and unique positive screen mesh cleaning system, the Apex provides unusually high e�ciency and capacity.
Rotex Apex Screener - Material Flow Through Machine
Global Headquarters | 1230 Knowlton Street | Cincinnati, OH 45223 | Tel: (513) 541 1236 | Email: [email protected]
www.rotex.com
.
No ofScreen
Surfaces
1
2
3
4
5
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
Nom. AreaPer Screen
SurfaceSq. Meter
Strokemm
RPM KW RPM A B C D
ShippingWeight
Kg
Screen Motion Motor Principal dimensions - mm
The speci�cations listed below are based upon a Apex Screener of standard construction ranging from a single screen model (2 grades - 1 seperation) to a 5 screen model (6 grades - 5 seperations). Drawings are representative of ROTEX model, but overall dimensions may vary depending on the mounting method and drive head used.
Rotex Apex Screener
Incoming Material
Fines Product Overs
The new APEX screener is designed for e�cient performance, quick and easy maintenance / cleaning and increased process “up-time” within your production line
E�cient Performance, Ergonomic Design, Rotex Quality
Bene�ts
Why Application and Process Engineers Choose Apex Screeners
Ease of operation, low maintenance cost, years of trouble-free operation
Classic low angle, long stroke, Rotex gyratory-reciprocating motion creates most e�cient screening environment
Built by experienced, knowledgeable application engineers who understand your product
Ergonomic design enables single operator/maintenance e�ciency
Rotex Screeners o�er peace of mind
Proven Rotex gyratory reciprocating motion for unmatched product recovery e�ciency and increased pro�ts
Increased capacity and decreased operating costs in the same footprint
Available with or without aspiration for additional cleaning capabilities
Designed for reduced downtime, ease of maintenance and quick screen replacements
Proven rugged, long-lasting and versatile screener used in countless applications throughout the world for decades
Apex
Screener
PR
OD
UC
T S
HE
ET
| AP
EX
SC
RE
EN
ER
™
™P
RO
DU
CT
SH
EE
T | A
PE
X S
CR
EE
NE
R™
PR
OD
UC
T S
HE
ET
|
AP
EX
S
CR
EE
NE
R™
PR
OD
UC
T S
HE
ET
|
AP
EX
S
CR
EE
NE
R™
™ Rotex Apex Screener ™
Ergonomic DesignLarge doors on the side of the machine allow easy access which results in screen changes of less than 2 minutes per panel with a 1 man operation
Financial Advantage
Reduced labor costs – one person operation
Reduced down time – ergonomic design enables faster screen changes with a single operator
Improved Quality – the proven superiority of low angle, long stroke gyratory-reciprocating motion increases the amount of separated product you can sell
Increased Capacity – multiple machine sizes and con�guration enable you to customise capacity for your application and space requirements
Rugged, time-proven construction means this machine will support your process for many, many years to come
ROTEX Screeners produce the highest yields of consistent on-spec product with minimum rejection of good material.
Positive Screen CleaningBouncing balls keep screen openings clear, maintaining e�ciency and capacity
Ergonomic DesignNew side access doors enable changes in less than two minutes per panel
Quick Release CamsLift cams and positive sealing
.Sealing StripsComponents are sealed using continuous sealing strips for separation of screen decks
Reduced MaintenanceEasy access to discharge units and external drive unit reduces maintenance time with a 1 man operation
The Apex screener provides lower operating costs and higher productivity to increase your ROI
Speed
ft2 m2 in. mm rpm in. mm in. mm in. mm in. mm lb kg9-1* 30 9 0.8 2.5 64 252 2 1.5 91 2311 44 1118 36 914 67 1702 1700 77118-1* 30 18 1.7 2.5 64 252 2 1.5 143 3632 47 1194 36 914 69 1753 2000 90735-1 80 35 3.3 3 76 216 3 2.2 150 3810 55 1397 60 1524 132 3353 3800 1723
35C-1†* 80 35 3.3 3 76 216 3 2.2 150 3810 72 1829 36 914 68 1727 4100 185955-1 80 55 5.1 3 76 216 5 3.7 195 4953 58 1473 60 1524 132 3353 4500 2041
70-1 † 50 70 6.5 3.5 89 200 7.5 5.6 174 4420 79 2007 60 1524 132 3353 6900 3129110-1 † 70 110 10.2 3.5 89 200 10 7.5 222 5639 81 2057 73 1854 132 3353 10500 4762
9-2* 30 9 0.8 2.5 64 252 2 1.5 109 2769 50 1270 36 914 67 1702 1800 81618-2* 80 18 1.7 3 76 216 3 2.2 156 3962 60 1524 36 914 69 1753 3500 158735-2 80 35 3.3 3 76 216 5 3.7 172 4369 62 1575 60 1524 132 3353 4400 199555-2 50 55 5.1 3.5 89 200 7.5 5.6 214 5436 70 1778 60 1524 132 3353 7200 3265
70-2 † 70 70 6.5 3.5 89 200 10 7.5 185 4699 90 2286 73 1854 132 3353 11000 4989110-2 † 70 110 10.2 3.5 89 200 10 7.5 231 5867 94 2388 73 1854 132 3353 13500 612218-3* 80 18 1.7 3 76 216 3 2.2 159 4039 68 1727 36 914 69 1753 3800 172335-3 50 35 3.3 3.5 89 200 7.5 5.6 177 4496 73 1854 60 1524 132 3353 7000 317555-3 70 55 5.1 3.5 89 200 10 7.5 234 5944 75 1905 73 1854 132 3353 10500 4762
55-4 70 55 5.1 3.5 89 200 10 7.5 234 5944 86 2184 73 1854 132 3353 13500 6122
Speed
ft2 m2 in. mm rpm in. mm in. mm in. mm in. mm lb kg71L-1 50 71 6.6 3.5 89 200 7.5 5.695L-1 70 95 8.8 3.5 89 200 10 7.5 290 7366 73 1854 89 2261 164 4166 10500 476271L-2 70 71 6.6 3.5 89 200 10 7.5 250 6350 82 2083 89 2261 164 4166 11000 498995L-2 70 95 8.8 3.5 89 200 10 7.5 290 7366 85 2159 89 2261 164 4166 12500 5669
71L-3 70 71 6.6 3.5 89 200 10 7.5 244 6198 76 1930 89 2261 164 4166 13000 5896
Principal Dimensions
A. Overall LengthAPEX™Model
Number
Motor
hp kW
DriveHeadSeries
APEX™ Screener Models - 30" x 42" (762mm x 1067mm) Panels
Total Nominal Area
Number of Screen
SurfacesD. Installation WidthB. Overall Height C. Base Width Shipping Weight
Screen Motion
Stroke
Contact Rotex
Number of Screen
Surfaces
APEX™Model
Number
DriveHeadSeries
Total Nominal Area
* indicates access from one side only.
Motor
† indicates two deck independently fed ("stacked") design.
Principal Dimensions
Shipping WeightStroke
hp kWA. Overall Length B. Overall Height C. Base Width D. Installation Width
Screen Motion
Apex screener models - 30” x 42” (762mm x 1067mm) panels
Apex screener models - 38” x 45” (965mm x 1143mm) panels
1
2
34
123
9-1*
18-1*
35-135C-1†*
55-170-1†
110-1†
9-2*
18-2*
35-255-270-2†
110-2†
9-3*
18-3*
35-355-3
55-4
91835355570
1109
18355570
1109
183555
55
0.81.73.33.35.16.5
10.20.81.73.35.16.5
10.20.81.73.35.1
5.1
22335
7.510235
7.5101033
7.510
10
1.51.52.22.23.75.67.51.52.23.75.67.57.52.22.25.67.5
7.5
91143150150195174222109156152214185231114159177234
234
23113632381038104953442056392769396238615436469958672896403944965944
5944
4447557258798150606270909466687375
86
11181194139718291473200720571270152415751778228623881676172718541905
2184
3636603660607336366060737336366073
73
914914
1524914
152415241854914914
1524152418541854914914
15241854
1854
6769
13268
1321321326769
1321321321327069
132132
132
17021753335317273353335333531702175333533353335333531778175333533353
3353
170020003800410045006900
105001800350045007200
1100013500270038007000
10500
13500
773909
17271864204531364773818
159120453273500061361227172731824773
6136
12L-1*
24L-1*
24LC-1†*
36L-1*
48LC-1†*
71LH-195LH-1
142LH-1†
190L-1†
12L-2*
24LH-2*
36L-2*
48L-271L-2
71LH-295L-2
95LH-212L-3*
24L-3*
36L-3*
71L-3
36L-4*
12242436487195
142190122436487171959512243671
36
1.12.22.23.34.56.68.8
13.217.61.12.23.34.56.66.68.88.81.12.23.36.6
3.3
23333
7.5101010235
7.51010101035
7.510
7.5
1.52.22.22.22.25.67.57.57.51.52.23.75.67.57.57.57.52.23.75.67.5
5.6
104150106201154225287266298112163216182240250300290115166236244
236
264238102692510539125715729067567569284541405486462360966350762073662921421659946198
5994
455370647574788380517064619086909067707376
80
114313461778162619051880198121082032129517781626154922862184228622861702177818541930
2032
444444444476898989444445899089898944444589
45
111811181118111811181930226122612261111811181143226122862261226122611118111811432261
1143
8385858585
163163163163838585
163165163164164858585
164
85
210821592159215921594140414041404140210821592159414041914140416641662159215921594166
2159
170035003500380042009300
12,00013,00015,0002000410044007500
11,00012,30014,80014,600345041667400
13000
8000
77315911591172719094227545559096818909
18642000340950005591672766361568189433645909
3636
1
2
3
4
1
2
34
No. of Screen
Surfaces
Apex™ Model
No. ft2 m2 hp kW in mm in mm in mm in mm lb kg
Total Nominal Area
MotorPrincipal Dimensions
A B C DShipping Weight
L Indicates use of 38”x45” (965 mm x 1143 mm) panels† Indicates two deck independently fed (“stacked”) design
* Indicates access from one side only
Machines using original screen panel size
Machines using larger screen panel size
APEX™ Features APEX™ Benefits
Ergonomic and lightweight design eliminates need for multi-person maintenance crews and overhead hoists
Pretensioned screen panels and side mounted access doors reduce downtime
Easy access connecting sleeves located at discharge end
Unique Rotex Gyratory Reciprocating motion yields exceptional product recovery
Apex™ Benefits
Product
94.5%3% 2.5%
Overs
96.4%3.6%
Fines
97.9%2.1%
Apex screeners are production screening machines for separating dry materials according to particle size. Through their unique gyratory-reciprocating motion, near horizontal screen surface and unique positive screen mesh cleaning system, the Apex provides unusually high e�ciency and capacity.
Rotex Apex Screener - Material Flow Through Machine
Global Headquarters | 1230 Knowlton Street | Cincinnati, OH 45223 | Tel: (513) 541 1236 | Email: [email protected]
www.rotex.com
.
No ofScreen
Surfaces
1
2
3
4
5
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
Nom. AreaPer Screen
SurfaceSq. Meter
Strokemm
RPM KW RPM A B C D
ShippingWeight
Kg
Screen Motion Motor Principal dimensions - mm
The speci�cations listed below are based upon a Apex Screener of standard construction ranging from a single screen model (2 grades - 1 seperation) to a 5 screen model (6 grades - 5 seperations). Drawings are representative of ROTEX model, but overall dimensions may vary depending on the mounting method and drive head used.
Rotex Apex Screener
Incoming Material
Fines Product Overs
The new APEX screener is designed for e�cient performance, quick and easy maintenance / cleaning and increased process “up-time” within your production line
E�cient Performance, Ergonomic Design, Rotex Quality
Bene�ts
Why Application and Process Engineers Choose Apex Screeners
Ease of operation, low maintenance cost, years of trouble-free operation
Classic low angle, long stroke, Rotex gyratory-reciprocating motion creates most e�cient screening environment
Built by experienced, knowledgeable application engineers who understand your product
Ergonomic design enables single operator/maintenance e�ciency
Rotex Screeners o�er peace of mind
Proven Rotex gyratory reciprocating motion for unmatched product recovery e�ciency and increased pro�ts
Increased capacity and decreased operating costs in the same footprint
Available with or without aspiration for additional cleaning capabilities
Designed for reduced downtime, ease of maintenance and quick screen replacements
Proven rugged, long-lasting and versatile screener used in countless applications throughout the world for decades
Apex
Screener
PR
OD
UC
T S
HE
ET
| AP
EX
SC
RE
EN
ER
™
™P
RO
DU
CT
SH
EE
T | A
PE
X S
CR
EE
NE
R™
PR
OD
UC
T S
HE
ET
|
AP
EX
S
CR
EE
NE
R™
PR
OD
UC
T S
HE
ET
|
AP
EX
S
CR
EE
NE
R™
™ Rotex Apex Screener ™
Ergonomic DesignLarge doors on the side of the machine allow easy access which results in screen changes of less than 2 minutes per panel with a 1 man operation
Financial Advantage
Reduced labor costs – one person operation
Reduced down time – ergonomic design enables faster screen changes with a single operator
Improved Quality – the proven superiority of low angle, long stroke gyratory-reciprocating motion increases the amount of separated product you can sell
Increased Capacity – multiple machine sizes and con�guration enable you to customise capacity for your application and space requirements
Rugged, time-proven construction means this machine will support your process for many, many years to come
ROTEX Screeners produce the highest yields of consistent on-spec product with minimum rejection of good material.
Positive Screen CleaningBouncing balls keep screen openings clear, maintaining e�ciency and capacity
Ergonomic DesignNew side access doors enable changes in less than two minutes per panel
Quick Release CamsLift cams and positive sealing
.Sealing StripsComponents are sealed using continuous sealing strips for separation of screen decks
Reduced MaintenanceEasy access to discharge units and external drive unit reduces maintenance time with a 1 man operation
The Apex screener provides lower operating costs and higher productivity to increase your ROI
Speed
ft2 m2 in. mm rpm in. mm in. mm in. mm in. mm lb kg9-1* 30 9 0.8 2.5 64 252 2 1.5 91 2311 44 1118 36 914 67 1702 1700 77118-1* 30 18 1.7 2.5 64 252 2 1.5 143 3632 47 1194 36 914 69 1753 2000 90735-1 80 35 3.3 3 76 216 3 2.2 150 3810 55 1397 60 1524 132 3353 3800 1723
35C-1†* 80 35 3.3 3 76 216 3 2.2 150 3810 72 1829 36 914 68 1727 4100 185955-1 80 55 5.1 3 76 216 5 3.7 195 4953 58 1473 60 1524 132 3353 4500 2041
70-1 † 50 70 6.5 3.5 89 200 7.5 5.6 174 4420 79 2007 60 1524 132 3353 6900 3129110-1 † 70 110 10.2 3.5 89 200 10 7.5 222 5639 81 2057 73 1854 132 3353 10500 4762
9-2* 30 9 0.8 2.5 64 252 2 1.5 109 2769 50 1270 36 914 67 1702 1800 81618-2* 80 18 1.7 3 76 216 3 2.2 156 3962 60 1524 36 914 69 1753 3500 158735-2 80 35 3.3 3 76 216 5 3.7 172 4369 62 1575 60 1524 132 3353 4400 199555-2 50 55 5.1 3.5 89 200 7.5 5.6 214 5436 70 1778 60 1524 132 3353 7200 3265
70-2 † 70 70 6.5 3.5 89 200 10 7.5 185 4699 90 2286 73 1854 132 3353 11000 4989110-2 † 70 110 10.2 3.5 89 200 10 7.5 231 5867 94 2388 73 1854 132 3353 13500 612218-3* 80 18 1.7 3 76 216 3 2.2 159 4039 68 1727 36 914 69 1753 3800 172335-3 50 35 3.3 3.5 89 200 7.5 5.6 177 4496 73 1854 60 1524 132 3353 7000 317555-3 70 55 5.1 3.5 89 200 10 7.5 234 5944 75 1905 73 1854 132 3353 10500 4762
55-4 70 55 5.1 3.5 89 200 10 7.5 234 5944 86 2184 73 1854 132 3353 13500 6122
Speed
ft2 m2 in. mm rpm in. mm in. mm in. mm in. mm lb kg71L-1 50 71 6.6 3.5 89 200 7.5 5.695L-1 70 95 8.8 3.5 89 200 10 7.5 290 7366 73 1854 89 2261 164 4166 10500 476271L-2 70 71 6.6 3.5 89 200 10 7.5 250 6350 82 2083 89 2261 164 4166 11000 498995L-2 70 95 8.8 3.5 89 200 10 7.5 290 7366 85 2159 89 2261 164 4166 12500 5669
71L-3 70 71 6.6 3.5 89 200 10 7.5 244 6198 76 1930 89 2261 164 4166 13000 5896
Principal Dimensions
A. Overall LengthAPEX™Model
Number
Motor
hp kW
DriveHeadSeries
APEX™ Screener Models - 30" x 42" (762mm x 1067mm) Panels
Total Nominal Area
Number of Screen
SurfacesD. Installation WidthB. Overall Height C. Base Width Shipping Weight
Screen Motion
Stroke
Contact Rotex
Number of Screen
Surfaces
APEX™Model
Number
DriveHeadSeries
Total Nominal Area
* indicates access from one side only.
Motor
† indicates two deck independently fed ("stacked") design.
Principal Dimensions
Shipping WeightStroke
hp kWA. Overall Length B. Overall Height C. Base Width D. Installation Width
Screen Motion
Apex screener models - 30” x 42” (762mm x 1067mm) panels
Apex screener models - 38” x 45” (965mm x 1143mm) panels
1
2
34
123
Product
94.5%3% 2.5%
Overs
96.4%3.6%
Fines
97.9%2.1%
Apex screeners are production screening machines for separating dry materials according to particle size. Through their unique gyratory-reciprocating motion, near horizontal screen surface and unique positive screen mesh cleaning system, the Apex provides unusually high e�ciency and capacity.
Rotex Apex Screener - Material Flow Through Machine
Global Headquarters | 1230 Knowlton Street | Cincinnati, OH 45223 | Tel: (513) 541 1236 | Email: [email protected]
www.rotex.com
.
No ofScreen
Surfaces
1
2
3
4
5
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
Nom. AreaPer Screen
SurfaceSq. Meter
Strokemm
RPM KW RPM A B C D
ShippingWeight
Kg
Screen Motion Motor Principal dimensions - mm
The speci�cations listed below are based upon a Apex Screener of standard construction ranging from a single screen model (2 grades - 1 seperation) to a 5 screen model (6 grades - 5 seperations). Drawings are representative of ROTEX model, but overall dimensions may vary depending on the mounting method and drive head used.
Rotex Apex Screener
Incoming Material
Fines Product Overs
The new APEX screener is designed for e�cient performance, quick and easy maintenance / cleaning and increased process “up-time” within your production line
E�cient Performance, Ergonomic Design, Rotex Quality
Bene�ts
Why Application and Process Engineers Choose Apex Screeners
Ease of operation, low maintenance cost, years of trouble-free operation
Classic low angle, long stroke, Rotex gyratory-reciprocating motion creates most e�cient screening environment
Built by experienced, knowledgeable application engineers who understand your product
Ergonomic design enables single operator/maintenance e�ciency
Rotex Screeners o�er peace of mind
Proven Rotex gyratory reciprocating motion for unmatched product recovery e�ciency and increased pro�ts
Increased capacity and decreased operating costs in the same footprint
Available with or without aspiration for additional cleaning capabilities
Designed for reduced downtime, ease of maintenance and quick screen replacements
Proven rugged, long-lasting and versatile screener used in countless applications throughout the world for decades
Apex
Screener
PR
OD
UC
T S
HE
ET
| AP
EX
SC
RE
EN
ER
™
™P
RO
DU
CT
SH
EE
T | A
PE
X S
CR
EE
NE
R™
PR
OD
UC
T S
HE
ET
|
AP
EX
S
CR
EE
NE
R™
PR
OD
UC
T S
HE
ET
|
AP
EX
S
CR
EE
NE
R™
™ Rotex Apex Screener ™
Ergonomic DesignLarge doors on the side of the machine allow easy access which results in screen changes of less than 2 minutes per panel with a 1 man operation
Financial Advantage
Reduced labor costs – one person operation
Reduced down time – ergonomic design enables faster screen changes with a single operator
Improved Quality – the proven superiority of low angle, long stroke gyratory-reciprocating motion increases the amount of separated product you can sell
Increased Capacity – multiple machine sizes and con�guration enable you to customise capacity for your application and space requirements
Rugged, time-proven construction means this machine will support your process for many, many years to come
ROTEX Screeners produce the highest yields of consistent on-spec product with minimum rejection of good material.
Positive Screen CleaningBouncing balls keep screen openings clear, maintaining e�ciency and capacity
Ergonomic DesignNew side access doors enable changes in less than two minutes per panel
Quick Release CamsLift cams and positive sealing
.Sealing StripsComponents are sealed using continuous sealing strips for separation of screen decks
Reduced MaintenanceEasy access to discharge units and external drive unit reduces maintenance time with a 1 man operation
The Apex screener provides lower operating costs and higher productivity to increase your ROI
Speed
ft2 m2 in. mm rpm in. mm in. mm in. mm in. mm lb kg9-1* 30 9 0.8 2.5 64 252 2 1.5 91 2311 44 1118 36 914 67 1702 1700 77118-1* 30 18 1.7 2.5 64 252 2 1.5 143 3632 47 1194 36 914 69 1753 2000 90735-1 80 35 3.3 3 76 216 3 2.2 150 3810 55 1397 60 1524 132 3353 3800 1723
35C-1†* 80 35 3.3 3 76 216 3 2.2 150 3810 72 1829 36 914 68 1727 4100 185955-1 80 55 5.1 3 76 216 5 3.7 195 4953 58 1473 60 1524 132 3353 4500 2041
70-1 † 50 70 6.5 3.5 89 200 7.5 5.6 174 4420 79 2007 60 1524 132 3353 6900 3129110-1 † 70 110 10.2 3.5 89 200 10 7.5 222 5639 81 2057 73 1854 132 3353 10500 4762
9-2* 30 9 0.8 2.5 64 252 2 1.5 109 2769 50 1270 36 914 67 1702 1800 81618-2* 80 18 1.7 3 76 216 3 2.2 156 3962 60 1524 36 914 69 1753 3500 158735-2 80 35 3.3 3 76 216 5 3.7 172 4369 62 1575 60 1524 132 3353 4400 199555-2 50 55 5.1 3.5 89 200 7.5 5.6 214 5436 70 1778 60 1524 132 3353 7200 3265
70-2 † 70 70 6.5 3.5 89 200 10 7.5 185 4699 90 2286 73 1854 132 3353 11000 4989110-2 † 70 110 10.2 3.5 89 200 10 7.5 231 5867 94 2388 73 1854 132 3353 13500 612218-3* 80 18 1.7 3 76 216 3 2.2 159 4039 68 1727 36 914 69 1753 3800 172335-3 50 35 3.3 3.5 89 200 7.5 5.6 177 4496 73 1854 60 1524 132 3353 7000 317555-3 70 55 5.1 3.5 89 200 10 7.5 234 5944 75 1905 73 1854 132 3353 10500 4762
55-4 70 55 5.1 3.5 89 200 10 7.5 234 5944 86 2184 73 1854 132 3353 13500 6122
Speed
ft2 m2 in. mm rpm in. mm in. mm in. mm in. mm lb kg71L-1 50 71 6.6 3.5 89 200 7.5 5.695L-1 70 95 8.8 3.5 89 200 10 7.5 290 7366 73 1854 89 2261 164 4166 10500 476271L-2 70 71 6.6 3.5 89 200 10 7.5 250 6350 82 2083 89 2261 164 4166 11000 498995L-2 70 95 8.8 3.5 89 200 10 7.5 290 7366 85 2159 89 2261 164 4166 12500 5669
71L-3 70 71 6.6 3.5 89 200 10 7.5 244 6198 76 1930 89 2261 164 4166 13000 5896
Principal Dimensions
A. Overall LengthAPEX™Model
Number
Motor
hp kW
DriveHeadSeries
APEX™ Screener Models - 30" x 42" (762mm x 1067mm) Panels
Total Nominal Area
Number of Screen
SurfacesD. Installation WidthB. Overall Height C. Base Width Shipping Weight
Screen Motion
Stroke
Contact Rotex
Number of Screen
Surfaces
APEX™Model
Number
DriveHeadSeries
Total Nominal Area
* indicates access from one side only.
Motor
† indicates two deck independently fed ("stacked") design.
Principal Dimensions
Shipping WeightStroke
hp kWA. Overall Length B. Overall Height C. Base Width D. Installation Width
Screen Motion
Apex screener models - 30” x 42” (762mm x 1067mm) panels
Apex screener models - 38” x 45” (965mm x 1143mm) panels
1
2
34
123
Product
94.5%3% 2.5%
Overs
96.4%3.6%
Fines
97.9%2.1%
Apex screeners are production screening machines for separating dry materials according to particle size. Through their unique gyratory-reciprocating motion, near horizontal screen surface and unique positive screen mesh cleaning system, the Apex provides unusually high e�ciency and capacity.
Rotex Apex Screener - Material Flow Through Machine
Global Headquarters | 1230 Knowlton Street | Cincinnati, OH 45223 | Tel: (513) 541 1236 | Email: [email protected]
www.rotex.com
.
No ofScreen
Surfaces
1
2
3
4
5
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
Nom. AreaPer Screen
SurfaceSq. Meter
Strokemm
RPM KW RPM A B C D
ShippingWeight
Kg
Screen Motion Motor Principal dimensions - mm
The speci�cations listed below are based upon a Apex Screener of standard construction ranging from a single screen model (2 grades - 1 seperation) to a 5 screen model (6 grades - 5 seperations). Drawings are representative of ROTEX model, but overall dimensions may vary depending on the mounting method and drive head used.
Rotex Apex Screener
Incoming Material
Fines Product Overs
The new APEX screener is designed for e�cient performance, quick and easy maintenance / cleaning and increased process “up-time” within your production line
E�cient Performance, Ergonomic Design, Rotex Quality
Bene�ts
Why Application and Process Engineers Choose Apex Screeners
Ease of operation, low maintenance cost, years of trouble-free operation
Classic low angle, long stroke, Rotex gyratory-reciprocating motion creates most e�cient screening environment
Built by experienced, knowledgeable application engineers who understand your product
Ergonomic design enables single operator/maintenance e�ciency
Rotex Screeners o�er peace of mind
Proven Rotex gyratory reciprocating motion for unmatched product recovery e�ciency and increased pro�ts
Increased capacity and decreased operating costs in the same footprint
Available with or without aspiration for additional cleaning capabilities
Designed for reduced downtime, ease of maintenance and quick screen replacements
Proven rugged, long-lasting and versatile screener used in countless applications throughout the world for decades
Apex
Screener
PR
OD
UC
T S
HE
ET
| AP
EX
SC
RE
EN
ER
™
™P
RO
DU
CT
SH
EE
T | A
PE
X S
CR
EE
NE
R™
PR
OD
UC
T S
HE
ET
|
AP
EX
S
CR
EE
NE
R™
PR
OD
UC
T S
HE
ET
|
AP
EX
S
CR
EE
NE
R™
™ Rotex Apex Screener ™
Ergonomic DesignLarge doors on the side of the machine allow easy access which results in screen changes of less than 2 minutes per panel with a 1 man operation
Financial Advantage
Reduced labor costs – one person operation
Reduced down time – ergonomic design enables faster screen changes with a single operator
Improved Quality – the proven superiority of low angle, long stroke gyratory-reciprocating motion increases the amount of separated product you can sell
Increased Capacity – multiple machine sizes and con�guration enable you to customise capacity for your application and space requirements
Rugged, time-proven construction means this machine will support your process for many, many years to come
ROTEX Screeners produce the highest yields of consistent on-spec product with minimum rejection of good material.
Positive Screen CleaningBouncing balls keep screen openings clear, maintaining e�ciency and capacity
Ergonomic DesignNew side access doors enable changes in less than two minutes per panel
Quick Release CamsLift cams and positive sealing
.Sealing StripsComponents are sealed using continuous sealing strips for separation of screen decks
Reduced MaintenanceEasy access to discharge units and external drive unit reduces maintenance time with a 1 man operation
The Apex screener provides lower operating costs and higher productivity to increase your ROI
Speed
ft2 m2 in. mm rpm in. mm in. mm in. mm in. mm lb kg9-1* 30 9 0.8 2.5 64 252 2 1.5 91 2311 44 1118 36 914 67 1702 1700 77118-1* 30 18 1.7 2.5 64 252 2 1.5 143 3632 47 1194 36 914 69 1753 2000 90735-1 80 35 3.3 3 76 216 3 2.2 150 3810 55 1397 60 1524 132 3353 3800 1723
35C-1†* 80 35 3.3 3 76 216 3 2.2 150 3810 72 1829 36 914 68 1727 4100 185955-1 80 55 5.1 3 76 216 5 3.7 195 4953 58 1473 60 1524 132 3353 4500 2041
70-1 † 50 70 6.5 3.5 89 200 7.5 5.6 174 4420 79 2007 60 1524 132 3353 6900 3129110-1 † 70 110 10.2 3.5 89 200 10 7.5 222 5639 81 2057 73 1854 132 3353 10500 4762
9-2* 30 9 0.8 2.5 64 252 2 1.5 109 2769 50 1270 36 914 67 1702 1800 81618-2* 80 18 1.7 3 76 216 3 2.2 156 3962 60 1524 36 914 69 1753 3500 158735-2 80 35 3.3 3 76 216 5 3.7 172 4369 62 1575 60 1524 132 3353 4400 199555-2 50 55 5.1 3.5 89 200 7.5 5.6 214 5436 70 1778 60 1524 132 3353 7200 3265
70-2 † 70 70 6.5 3.5 89 200 10 7.5 185 4699 90 2286 73 1854 132 3353 11000 4989110-2 † 70 110 10.2 3.5 89 200 10 7.5 231 5867 94 2388 73 1854 132 3353 13500 612218-3* 80 18 1.7 3 76 216 3 2.2 159 4039 68 1727 36 914 69 1753 3800 172335-3 50 35 3.3 3.5 89 200 7.5 5.6 177 4496 73 1854 60 1524 132 3353 7000 317555-3 70 55 5.1 3.5 89 200 10 7.5 234 5944 75 1905 73 1854 132 3353 10500 4762
55-4 70 55 5.1 3.5 89 200 10 7.5 234 5944 86 2184 73 1854 132 3353 13500 6122
Speed
ft2 m2 in. mm rpm in. mm in. mm in. mm in. mm lb kg71L-1 50 71 6.6 3.5 89 200 7.5 5.695L-1 70 95 8.8 3.5 89 200 10 7.5 290 7366 73 1854 89 2261 164 4166 10500 476271L-2 70 71 6.6 3.5 89 200 10 7.5 250 6350 82 2083 89 2261 164 4166 11000 498995L-2 70 95 8.8 3.5 89 200 10 7.5 290 7366 85 2159 89 2261 164 4166 12500 5669
71L-3 70 71 6.6 3.5 89 200 10 7.5 244 6198 76 1930 89 2261 164 4166 13000 5896
Principal Dimensions
A. Overall LengthAPEX™Model
Number
Motor
hp kW
DriveHeadSeries
APEX™ Screener Models - 30" x 42" (762mm x 1067mm) Panels
Total Nominal Area
Number of Screen
SurfacesD. Installation WidthB. Overall Height C. Base Width Shipping Weight
Screen Motion
Stroke
Contact Rotex
Number of Screen
Surfaces
APEX™Model
Number
DriveHeadSeries
Total Nominal Area
* indicates access from one side only.
Motor
† indicates two deck independently fed ("stacked") design.
Principal Dimensions
Shipping WeightStroke
hp kWA. Overall Length B. Overall Height C. Base Width D. Installation Width
Screen Motion
Apex screener models - 30” x 42” (762mm x 1067mm) panels
Apex screener models - 38” x 45” (965mm x 1143mm) panels
1
2
34
123
Product
94.5%3% 2.5%
Overs
96.4%3.6%
Fines
97.9%2.1%
Apex screeners are production screening machines for separating dry materials according to particle size. Through their unique gyratory-reciprocating motion, near horizontal screen surface and unique positive screen mesh cleaning system, the Apex provides unusually high e�ciency and capacity.
Rotex Apex Screener - Material Flow Through Machine
Global Headquarters | 1230 Knowlton Street | Cincinnati, OH 45223 | Tel: (513) 541 1236 | Email: [email protected]
www.rotex.com
.
No ofScreen
Surfaces
1
2
3
4
5
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
Nom. AreaPer Screen
SurfaceSq. Meter
Strokemm
RPM KW RPM A B C D
ShippingWeight
Kg
Screen Motion Motor Principal dimensions - mm
The speci�cations listed below are based upon a Apex Screener of standard construction ranging from a single screen model (2 grades - 1 seperation) to a 5 screen model (6 grades - 5 seperations). Drawings are representative of ROTEX model, but overall dimensions may vary depending on the mounting method and drive head used.
Rotex Apex Screener
Incoming Material
Fines Product Overs
The new APEX screener is designed for e�cient performance, quick and easy maintenance / cleaning and increased process “up-time” within your production line
E�cient Performance, Ergonomic Design, Rotex Quality
Bene�ts
Why Application and Process Engineers Choose Apex Screeners
Ease of operation, low maintenance cost, years of trouble-free operation
Classic low angle, long stroke, Rotex gyratory-reciprocating motion creates most e�cient screening environment
Built by experienced, knowledgeable application engineers who understand your product
Ergonomic design enables single operator/maintenance e�ciency
Rotex Screeners o�er peace of mind
Proven Rotex gyratory reciprocating motion for unmatched product recovery e�ciency and increased pro�ts
Increased capacity and decreased operating costs in the same footprint
Available with or without aspiration for additional cleaning capabilities
Designed for reduced downtime, ease of maintenance and quick screen replacements
Proven rugged, long-lasting and versatile screener used in countless applications throughout the world for decades
Apex
Screener
PR
OD
UC
T S
HE
ET
| AP
EX
SC
RE
EN
ER
™
™P
RO
DU
CT
SH
EE
T | A
PE
X S
CR
EE
NE
R™
PR
OD
UC
T S
HE
ET
|
AP
EX
S
CR
EE
NE
R™
PR
OD
UC
T S
HE
ET
|
AP
EX
S
CR
EE
NE
R™
™ Rotex Apex Screener ™
Ergonomic DesignLarge doors on the side of the machine allow easy access which results in screen changes of less than 2 minutes per panel with a 1 man operation
Financial Advantage
Reduced labor costs – one person operation
Reduced down time – ergonomic design enables faster screen changes with a single operator
Improved Quality – the proven superiority of low angle, long stroke gyratory-reciprocating motion increases the amount of separated product you can sell
Increased Capacity – multiple machine sizes and con�guration enable you to customise capacity for your application and space requirements
Rugged, time-proven construction means this machine will support your process for many, many years to come
ROTEX Screeners produce the highest yields of consistent on-spec product with minimum rejection of good material.
Positive Screen CleaningBouncing balls keep screen openings clear, maintaining e�ciency and capacity
Ergonomic DesignNew side access doors enable changes in less than two minutes per panel
Quick Release CamsLift cams and positive sealing
.Sealing StripsComponents are sealed using continuous sealing strips for separation of screen decks
Reduced MaintenanceEasy access to discharge units and external drive unit reduces maintenance time with a 1 man operation
The Apex screener provides lower operating costs and higher productivity to increase your ROI
Speed
ft2 m2 in. mm rpm in. mm in. mm in. mm in. mm lb kg9-1* 30 9 0.8 2.5 64 252 2 1.5 91 2311 44 1118 36 914 67 1702 1700 77118-1* 30 18 1.7 2.5 64 252 2 1.5 143 3632 47 1194 36 914 69 1753 2000 90735-1 80 35 3.3 3 76 216 3 2.2 150 3810 55 1397 60 1524 132 3353 3800 1723
35C-1†* 80 35 3.3 3 76 216 3 2.2 150 3810 72 1829 36 914 68 1727 4100 185955-1 80 55 5.1 3 76 216 5 3.7 195 4953 58 1473 60 1524 132 3353 4500 2041
70-1 † 50 70 6.5 3.5 89 200 7.5 5.6 174 4420 79 2007 60 1524 132 3353 6900 3129110-1 † 70 110 10.2 3.5 89 200 10 7.5 222 5639 81 2057 73 1854 132 3353 10500 4762
9-2* 30 9 0.8 2.5 64 252 2 1.5 109 2769 50 1270 36 914 67 1702 1800 81618-2* 80 18 1.7 3 76 216 3 2.2 156 3962 60 1524 36 914 69 1753 3500 158735-2 80 35 3.3 3 76 216 5 3.7 172 4369 62 1575 60 1524 132 3353 4400 199555-2 50 55 5.1 3.5 89 200 7.5 5.6 214 5436 70 1778 60 1524 132 3353 7200 3265
70-2 † 70 70 6.5 3.5 89 200 10 7.5 185 4699 90 2286 73 1854 132 3353 11000 4989110-2 † 70 110 10.2 3.5 89 200 10 7.5 231 5867 94 2388 73 1854 132 3353 13500 612218-3* 80 18 1.7 3 76 216 3 2.2 159 4039 68 1727 36 914 69 1753 3800 172335-3 50 35 3.3 3.5 89 200 7.5 5.6 177 4496 73 1854 60 1524 132 3353 7000 317555-3 70 55 5.1 3.5 89 200 10 7.5 234 5944 75 1905 73 1854 132 3353 10500 4762
55-4 70 55 5.1 3.5 89 200 10 7.5 234 5944 86 2184 73 1854 132 3353 13500 6122
Speed
ft2 m2 in. mm rpm in. mm in. mm in. mm in. mm lb kg71L-1 50 71 6.6 3.5 89 200 7.5 5.695L-1 70 95 8.8 3.5 89 200 10 7.5 290 7366 73 1854 89 2261 164 4166 10500 476271L-2 70 71 6.6 3.5 89 200 10 7.5 250 6350 82 2083 89 2261 164 4166 11000 498995L-2 70 95 8.8 3.5 89 200 10 7.5 290 7366 85 2159 89 2261 164 4166 12500 5669
71L-3 70 71 6.6 3.5 89 200 10 7.5 244 6198 76 1930 89 2261 164 4166 13000 5896
Principal Dimensions
A. Overall LengthAPEX™Model
Number
Motor
hp kW
DriveHeadSeries
APEX™ Screener Models - 30" x 42" (762mm x 1067mm) Panels
Total Nominal Area
Number of Screen
SurfacesD. Installation WidthB. Overall Height C. Base Width Shipping Weight
Screen Motion
Stroke
Contact Rotex
Number of Screen
Surfaces
APEX™Model
Number
DriveHeadSeries
Total Nominal Area
* indicates access from one side only.
Motor
† indicates two deck independently fed ("stacked") design.
Principal Dimensions
Shipping WeightStroke
hp kWA. Overall Length B. Overall Height C. Base Width D. Installation Width
Screen Motion
Apex screener models - 30” x 42” (762mm x 1067mm) panels
Apex screener models - 38” x 45” (965mm x 1143mm) panels
1
2
34
123
To find your local ROTEX representative visit www.rotex.com
PR
OD
UC
T S
HE
ET
|A
PE
X™
SC
RE
EN
ER
APEX™ Features
To find your local ROTEX representative visit www.rotex.com
Ergonomic and light-weight design reduces the needfor multi-person maintenance crews and overheadlifts to remove top cover for screen changes
Reduced down-time, increased screening flexibilitywith a pre-tension screen panels accessed throughside-mounted doors
Easy to access, quick to change discharge sleevesmounted in front of the unit
Unique Rotex Gyratory Reciprocating Motion forexceptional product recovery efficiency
APEX™ BenefitsGyratory Reciprocating motion
Add Aspiration for Additional Cleaning of your material
For additional cleaning functionality, add the new Aspiration Hood Unit to your APEX.This unit aids in de-dusting and removing additional light-weight material that may floatto the top as your product moves across the screening bed. Unlike other screeners withhoods that move over stationary beds of material, the APEX Aspiration Hood is part ofthe unit. As the Rotex Gyratory Reciprocating Motion agitates the material, light-weightelements and dust are encouraged to rise to the top where it is easily removed throughvacuum. The Airflow can be adjusted at two points to ensure maximum productivityand efficiency in further cleaning your material.
installation Options
Apex screeners are production screening machines for separating dry materials according to particle size. Through their unique gyratory-reciprocating motion, near horizontal screen surface and unique positive screen mesh cleaning system, the Apex provides unusually high e�ciency and capacity.
Rotex Apex Screener - Material Flow Through Machine
Global Headquarters | 1230 Knowlton Street | Cincinnati, OH 45223 | Tel: (513) 541 1236 | Email: [email protected]
www.rotex.com
.
No ofScreen
Surfaces
1
2
3
4
5
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.6
0.61.20.61.20.60.6
0.61.20.61.2
0.61.20.61.2
0.61.20.61.2
0.6
Nom. AreaPer Screen
SurfaceSq. Meter
Strokemm
RPM KW RPM A B C D
ShippingWeight
Kg
Screen Motion Motor Principal dimensions - mm
The speci�cations listed below are based upon a Apex Screener of standard construction ranging from a single screen model (2 grades - 1 seperation) to a 5 screen model (6 grades - 5 seperations). Drawings are representative of ROTEX model, but overall dimensions may vary depending on the mounting method and drive head used.
Rotex Apex Screener
Incoming Material
Fines Product Overs
The new APEX screener is designed for e�cient performance, quick and easy maintenance / cleaning and increased process “up-time” within your production line
E�cient Performance, Ergonomic Design, Rotex Quality
Bene�ts
Why Application and Process Engineers Choose Apex Screeners
Ease of operation, low maintenance cost, years of trouble-free operation
Classic low angle, long stroke, Rotex gyratory-reciprocating motion creates most e�cient screening environment
Built by experienced, knowledgeable application engineers who understand your product
Ergonomic design enables single operator/maintenance e�ciency
Rotex Screeners o�er peace of mind
Proven Rotex gyratory reciprocating motion for unmatched product recovery e�ciency and increased pro�ts
Increased capacity and decreased operating costs in the same footprint
Available with or without aspiration for additional cleaning capabilities
Designed for reduced downtime, ease of maintenance and quick screen replacements
Proven rugged, long-lasting and versatile screener used in countless applications throughout the world for decades
Apex
Screener
PR
OD
UC
T S
HE
ET
| AP
EX
SC
RE
EN
ER
™
™P
RO
DU
CT
SH
EE
T | A
PE
X S
CR
EE
NE
R™
PR
OD
UC
T S
HE
ET
|
AP
EX
S
CR
EE
NE
R™
PR
OD
UC
T S
HE
ET
|
AP
EX
S
CR
EE
NE
R™
™ Rotex Apex Screener ™
Ergonomic DesignLarge doors on the side of the machine allow easy access which results in screen changes of less than 2 minutes per panel with a 1 man operation
Financial Advantage
Reduced labor costs – one person operation
Reduced down time – ergonomic design enables faster screen changes with a single operator
Improved Quality – the proven superiority of low angle, long stroke gyratory-reciprocating motion increases the amount of separated product you can sell
Increased Capacity – multiple machine sizes and con�guration enable you to customise capacity for your application and space requirements
Rugged, time-proven construction means this machine will support your process for many, many years to come
ROTEX Screeners produce the highest yields of consistent on-spec product with minimum rejection of good material.
Positive Screen CleaningBouncing balls keep screen openings clear, maintaining e�ciency and capacity
Ergonomic DesignNew side access doors enable changes in less than two minutes per panel
Quick Release CamsLift cams and positive sealing
.Sealing StripsComponents are sealed using continuous sealing strips for separation of screen decks
Reduced MaintenanceEasy access to discharge units and external drive unit reduces maintenance time with a 1 man operation
The Apex screener provides lower operating costs and higher productivity to increase your ROI
Speed
ft2 m2 in. mm rpm in. mm in. mm in. mm in. mm lb kg9-1* 30 9 0.8 2.5 64 252 2 1.5 91 2311 44 1118 36 914 67 1702 1700 77118-1* 30 18 1.7 2.5 64 252 2 1.5 143 3632 47 1194 36 914 69 1753 2000 90735-1 80 35 3.3 3 76 216 3 2.2 150 3810 55 1397 60 1524 132 3353 3800 1723
35C-1†* 80 35 3.3 3 76 216 3 2.2 150 3810 72 1829 36 914 68 1727 4100 185955-1 80 55 5.1 3 76 216 5 3.7 195 4953 58 1473 60 1524 132 3353 4500 2041
70-1 † 50 70 6.5 3.5 89 200 7.5 5.6 174 4420 79 2007 60 1524 132 3353 6900 3129110-1 † 70 110 10.2 3.5 89 200 10 7.5 222 5639 81 2057 73 1854 132 3353 10500 4762
9-2* 30 9 0.8 2.5 64 252 2 1.5 109 2769 50 1270 36 914 67 1702 1800 81618-2* 80 18 1.7 3 76 216 3 2.2 156 3962 60 1524 36 914 69 1753 3500 158735-2 80 35 3.3 3 76 216 5 3.7 172 4369 62 1575 60 1524 132 3353 4400 199555-2 50 55 5.1 3.5 89 200 7.5 5.6 214 5436 70 1778 60 1524 132 3353 7200 3265
70-2 † 70 70 6.5 3.5 89 200 10 7.5 185 4699 90 2286 73 1854 132 3353 11000 4989110-2 † 70 110 10.2 3.5 89 200 10 7.5 231 5867 94 2388 73 1854 132 3353 13500 612218-3* 80 18 1.7 3 76 216 3 2.2 159 4039 68 1727 36 914 69 1753 3800 172335-3 50 35 3.3 3.5 89 200 7.5 5.6 177 4496 73 1854 60 1524 132 3353 7000 317555-3 70 55 5.1 3.5 89 200 10 7.5 234 5944 75 1905 73 1854 132 3353 10500 4762
55-4 70 55 5.1 3.5 89 200 10 7.5 234 5944 86 2184 73 1854 132 3353 13500 6122
Speed
ft2 m2 in. mm rpm in. mm in. mm in. mm in. mm lb kg71L-1 50 71 6.6 3.5 89 200 7.5 5.695L-1 70 95 8.8 3.5 89 200 10 7.5 290 7366 73 1854 89 2261 164 4166 10500 476271L-2 70 71 6.6 3.5 89 200 10 7.5 250 6350 82 2083 89 2261 164 4166 11000 498995L-2 70 95 8.8 3.5 89 200 10 7.5 290 7366 85 2159 89 2261 164 4166 12500 5669
71L-3 70 71 6.6 3.5 89 200 10 7.5 244 6198 76 1930 89 2261 164 4166 13000 5896
Principal Dimensions
A. Overall LengthAPEX™Model
Number
Motor
hp kW
DriveHeadSeries
APEX™ Screener Models - 30" x 42" (762mm x 1067mm) Panels
Total Nominal Area
Number of Screen
SurfacesD. Installation WidthB. Overall Height C. Base Width Shipping Weight
Screen Motion
Stroke
Contact Rotex
Number of Screen
Surfaces
APEX™Model
Number
DriveHeadSeries
Total Nominal Area
* indicates access from one side only.
Motor
† indicates two deck independently fed ("stacked") design.
Principal Dimensions
Shipping WeightStroke
hp kWA. Overall Length B. Overall Height C. Base Width D. Installation Width
Screen Motion
Apex screener models - 30” x 42” (762mm x 1067mm) panels
Apex screener models - 38” x 45” (965mm x 1143mm) panels
1
2
34
123
Floor Mounting
Because the ROTEX counterbalanced drive has low transmitted forces, the APEX canbe mounted directly on the floor or on an elevated structural steel framework.
Cable Suspension
APEX Screeners can be cable-suspended from the four corners of the machine,thereby isolating out-of-balance screening forces from the surrounding structure.Accurate counterbalancing of the APEX Screener makes this type of installation optionpossible. The APEX Screener can be suspended from a floor-mounted cable supportstand or existing overhead structure.
Contact your local ROTEX representative who will recommend a standfor any specific application.
The Gyratory Reciprocating Motion graduallydiminishes along the length of the machine toan elliptical path and finally to an approximatestraight line motion at the discharge end.
Circular motion at the feed end• Spreads the material across the full width
of the screen surface• Stratifies the material• Conveys material forward
Changing to elliptical motion at the centre• Long stroke elliptical action• Promotes stratification• Conveys material at high capacity
Straight line motion at thedischarge end• Near linear sifting motion• Removes near size particles• Higher screening efficiency• No vertical component ensures material is
in constant contact with the screen surface
ReducedMaintenanceEasy access to discharge sleeves for reducedmaintenance time
Positive Screen CleaningBouncing balls keep screenopenings clear, maintainingefficiency and capacity
Incoming Material
Fines Product Overs Ergonomic DesignLarge doors on the side of the machine allow easyaccess which results in screen changes of less than 2 minutes per panel with a 1 man operation
APEX™ Benefits
incoming material
Fines Product Overs
Apex Screeners produce the highest yields of consistent on-spec product
The Gyratory Reciprocating Motion gradually diminishes along the length of the machine to an elliptical path and finally to a nearly straight line motion at the discharge end.
Circular motion at the feed end• Spreads the material across the full width of the screen surface • Stratifies the material• Aggressively conveys material forward
Changing to elliptical motion at the middle of the deck• Long stroke elliptical action• Enhances product stratification• Conveys material at high capacity
Reciprocating motion at the discharge end• Removes near-size particles• Improves screening efficiency• No vertical component ensures material is in constant contact with the screen surface
Gyratory Reciprocating Motion
Installation OptionsFloor mountingBecause counterbalanced drives provide for low transmitted forces, the Apex can be mounted directly on the floor or on an elevated structural steel framework.
Cable SuspensionApex Screeners can be cable-suspended from the four corners of the machine, thereby isolating out-of-balance screening forces from the surrounding structure. Accurate counterbalancing of the Apex Screener makes this type of installation option possible. The Apex Screener can be suspended from a floor-mounted cable support stand or existing overhead structure.
Contact your local rotex representative who will recommend a stand for any specific application.
Tool-less camsNo wrenches are required to open doors or remove screens for inspection or maintenance
ergonomic DesignLarge access doors allow one person to change a screen panel in less than 2 minutes
reduced maintenanceEasy access to discharge sleeves reduces downtime
Add Aspiration for Additional Cleaning of Your Material
Most Apex Screeners can be equipped with aspiration hoods to remove dust and other light material. These hoods allow air to be pulled over the falling product stream and are adjustable for various products and rates.
To find your local Rotex representative visit www.rotex.com
Positive Screen CleaningBouncing balls keep screen openings clear, maintaining efficiency and capacity