are going with you in your high water quality demand
TRANSCRIPT
More than 10 years in Ultrapure Water System Manufacture, we are going with you in your high water quality demand – better understanding in service – good solutions and cost efficiency. Our ULTRAPUREPLUS machine series can be adapted with all of your requests.
ULTRAPURE WATER MACHINE ULTAPURE PLUS
DI WATER SYSTEM MODULE HIGHFLOW ULTRAPURE PLUS
UF – MBR SKID WASTE – RECICLE WATER SYSTEM STANDARD PURIFY
New technologies are applied to our products to get more advantage in quality and cost. All piping, fitting and equipment are following pharmacy standard. The design is easy for operation – maintenance and installation
The module is a standard design. It is applied to any demand for high flow DI water in Lab and suitable capacity for any low flow production plant. Just connect the inlet water – power supply, the user can get the standard water as your requirement.
Eco technologies is the main factor in our design. The Skid can be used for waste water recycle, reduce water waste, reduce spacing and resource. Base on our high-tech design with new UF-MBR technologies to get advantage compare to most current UF-MBR technologies on the world. Simple installation – Simple operation – optimize cost and Eco-Solution is our target to design and manufacture our products.
• Saving energy by using higher technologies to achieve the Ultrapure Water quality
• Less drain water to get a high quality water compare to
distillation technologies • Without heater, heater scale issue will be disappeared • Module designed will be the high advantage in maintenance and
warrantee • Spare are ready in stock will take a shorter time for
maintenance and spare replacement • 24/7 service will adapt your expect in professional way of
working and service
• 24 months in warrantee will be a high efficiency in investment.
An Ultrapure Water Machine which can be replaced for 2 times distillation machine Pull range of capacity from 5 t0 200 l/h Quality can be reached over 16.0 MΩ.cm resistivity Product is at the tap – Just open tap to get continuously product Quality monitor and auto recirculation Auto stop whenever feed water pressure too low Auto recirculation for bio treatment
Ultrapure Plus Type 3 is a high advantage Ultrapure water machine, designed by RO and DI technologies. The quality of produce water is for a wide range of laboratory and general manufacturing applications. Specially applied in Lab, Food and beverage, Semiconductor…. The machine is cost-effective and easy to installation with a compact designed. The Pure Easy provide medium and high purity water. Water quality is easy to monitor, with built in conductivity monitor. APPLICATION General analysis Sample dilution and solution preparation
FEATURE Easy to install Small space Mobile DI system Recycle material Low cost Ready spare parts – quick maintenance Conductivity Indicator (*)
Product Water Quality ASTM type 3 Model UPP T3 - 5 UPP T3 - 10 UPP T3 - 15 UPP T3 – 25 UPP T3 - 100 UPP T3 - 150 Conductivity (µS/cm) < 0.25 <0.25 <0.25 <0.25 <0.25 <0.25 pH ~7 ~7 ~7 ~7 ~7 ~7 Total Silica (µg/l) 500 500 500 500 500 500 TOC (µg/l) 200 200 200 200 200 200 Chlorides (µg/l) 10 10 10 10 10 10 Sodium (µg/l) 10 10 10 10 10 10 Bacteria (CFU/ml) <1000 1000 1000 1000 1000 1000 Endotoxin (EU/ml) N/A N/A N/A N/A N/A N/A
Model: Ultrapure Easy Type 3 SYSTEM PERFORMANCE UPP T3 – 5 UPP T3 – 10 UPP T3 – 15 UPP T3 – 25 UPP T3 – 100 UPP T3 – 150 Max ope flow (l/h) 5 10 15 25 100 150 Ope Pressure (bar) 7-8 7-8 7-8 7-8 7-8 7-8 Max Ope pressure (bar) 11 11 11 11 11 11 Max Temp (oC) 40 40 40 40 40 40 Feed Pressure Max (bar) 2 2 2 2 2 2 Feed Pressure Min (bar) 0.5 0.5 0.5 0.5 0.5 0.5 DIMENSION AND WEIGHT Height (mm) 450 450 450 450 1300 130 Width (mm) 350 350 350 350 400 400 Length (mm) 450 450 450 450 800 800 Weight (kg)* 18 20 25 28 60 70 FEED WATER REQUIREMENT Conductivity (µS/cm) < 100 Turbidity (NTU) < 1 Hardness (µg/l) 3.000 Iron (µg/l) 500 Silica (µg/l) 10.000 Chlorides (µg/l) 30.000
An Ultrapure Water Machine which reach USP – ASTM standard Pull range of capacity from 5 t0 25 l/h Quality can be reached over 16.5 MΩ.cm resistivity PTFE material of piping, pitting and valves to pass bacteria content in pharmacy water requirements TOC removal system can be got the result < 50 µg/l
• Saving cost by using higher technologies to achieve the Ultrapure Water quality
• CEDI is the best option in maintain water quality without
changing spare part to reach over 16.0 MΩ.cm resistivity • Our design and local stock will be a better option in price
reducing and delivery timing advance. • Any issue in water quality and equipment problem we can fit
it soonest by using our new machine to temporary replace to wait for maintenance
• 24/7 service will adapt your expect in professional way of
working and service
• 12 months warrantee for fully quality of product and equipment.
Model: Ultrapure Plus Type 2 (ASTM TYPE 2 – USP 27) Pure Easy is a high advantage Ultrapure Water Machine, designed by RO, CEDI and model sterilize technologies. The quality of product water is used for a wide range of laboratory and general manufacturing applications. Specially applied in Pharmacy, F&B, semiconductor…. The deionizers are cost-effective and easy to installation with a compact designed. The Pure Easy provide medium and high pure water. Water quality is easy to monitor, with built in conductivity monitor.
APPLICATION General analysis Sample dilution and solution preparation Pyrogen-sensitive applications Cell and tissue culture PCR HPLC
FEATURE Easy to install Small space Mobile DI system Recycle material Low cost Ready spare parts – quick maintenance Conductivity Indicator (*)
Product Water Quality ASTM Type 2 Model UPP T2 – 5 UPP T2 - 10 UPP T2 - 15 UPP T2 – 25 UPP T2 – 100 UPP T2 - 150
Conductivity (µS/cm) <1 <1 <1 <1 <1 <1
pH ~7 ~7 ~7 ~7 ~7 ~7
Total Silica (µg/l) 300 300 300 300 300 300
TOC (µg/l) 50 50 50 50 50 50
Chlorides (µg/l) 5 5 5 5 5 5
Sodium (µg/l) 5 5 5 5 5 5
Bacteria (CFU/ml) 10 10 10 10 10 10
Endotoxin (EU/ml) 0.25 0.25 0.25 0.25 0.25 0.25
SYSTEM PERFORMANCE UPP T2 – 5 UPP T2 - 10 UPP T2 - 15 UPP T2 – 25 UPP T2 – 100 UPP T2 - 150 Max ope flow (l/h) 5 10 15 25 100 150 Ope Pressure (bar) 7-8 7-8 7-8 7-8 4-6 4-6 Max Ope pressure (bar) 11 11 11 11 11 11 Max Temp (oC) 40 40 40 40 40 40 Feed Pressure Max (bar) 2 2 2 2 2 2 Feed Pressure Min (bar) 0.5 0.5 0.5 0.5 0.5 0.5 DIMENSION AND WEIGHT Model UPP T2 – 5 UPP T2 - 10 UPP T2 - 15 UPP T2 – 25 UPP T2 – 100 UPP T2 - 150
Height (mm) 450 450 450 450 1400 1400
Width (mm) 450 450 450 450 400 400
Length (mm) 450 450 450 450 800 800
Weight (kg)* 18 20 25 28 50 50 FEED WATER REQUIREMENT Conductivity (µS/cm) < 100 Turbidity (NTU) < 1 Hardness (µg/l) 3.000 Iron (µg/l) 500 Silica (µg/l) 10.000 Chlorides (µg/l) 30.000
Model: ULTRAPURE PLUS TYPE 1 (ASTM TYPE 1)
ULTRAPURE PLUS TYPE 1 is an ultrapure water machine, the main technoiloguies of the machine is RO and/or TRUEDI
and/or CEDI. Out let water quality is applied for many application including in Semiconductor – Pharmacy – PCR – HPLC …
The machine is custom designed, easy to install and efficiency for investment. UPP – T1 has the outlet water quality reach
conductivity to 0.055 uS/cm. Conductivity will be easy to read from the conductivity monitor.
Application
General analysis Sample dilution and solution preparation Pyrogen-sensitive applications Cell and tissue culture PCR HPLC
Product Water Quality ASTM type 1 Model UPP T1 – 5 UPP T1 - 10 UPP T1 - 15 UPP T1 – 25 UPP T1 – 100 UPP T1 - 150
Conductivity (µS/cm) 0.055 0.055 0.055 0.055 0.055 0.055
pH ~7 ~7 ~7 ~7 ~7 ~7
Total Silica (µg/l) 3 3 3 3 3 3
TOC (µg/l) 10 10 10 10 10 10
Chlorides (µg/l) 1 1 1 1 1 1
Sodium (µg/l) 1 1 1 1 1 1
Bacteria (CFU/ml) 1 11 11 11 1 1
Endotoxin (EU/ml) 0.03 0.03 0.03 0.03 0.03 0.03
FEATURE Easy to install Small space Mobile DI system Recycle material Low cost Ready spare parts – quick maintenance Conductivity Indicator (*)
SYSTEM PERFORMANCE UPP T1 – 5 UPP T1 - 10 UPP T1 - 15 UPP T1 – 25 UPP T1 – 100 UPP T1 - 150
Max ope flow (l/h) 5 10 15 25 100 150
Ope Pressure (bar) 7-8 7-8 7-8 7-8 7-8 7-8
Max ope Pressure (bar) 11 11 11 11 7 7
Max ope Temp (oC) 40 40 40 40 40 40
Max feed pressure (bar) 2 2 2 2 2 2
Min feed pressure (bar) 0.5 0.5 0.5 0.5 0.5 0.5
DIMENSION AND WEIGHT
Model UPP T1 – 5 UPP T1 - 10 UPP T1 - 15 UPP T1 – 25 UPP T1 – 100 UPP T1 - 150
Height (mm) 450 450 450 450 1400 1400
Width (mm) 450 450 450 450 400 400
Length (mm) 450 450 450 450 800 800
Weight (kg)* 18 20 25 28 50 50
FEED WATER REQUIREMENT Conductivity (µS/cm) < 100 Turbidity (NTU) < 1 Hardness (µg/l) 3.000 Iron (µg/l) 500 Silica (µg/l) 10.000 Chlorides (µg/l) 30.000
High flow Ultrapure water machine applied to any high flow demand in Lab with DI water quality requirement. Pull range of capacity from 100 t0 250 l/h Quality can be reached over 16.0 MΩ.cm resistivity Rejection is around 25% Auto recirculation to reduce the bio grow up event the system is in free of operation
• CEDI or DI technologies can be applied to get the best result. • Movable and flexible in transportation • The quality of product and all of equipment are in warrantee
in 24 months • 24/7 service will adapt your expect in professional way of
working and service
• All piping system are in Food standard
High flow Ultrapure water machine applied to any high flow demand in Lab or manufacture with USP – ASTM water quality standards. Pull range of capacity from 100 t0 250 l/h Quality can be reached over 16.0 MΩ.cm resistivity Rejection is around 25% Auto recirculation to reduce the bio grow up event the system is in free of operation
• CEDI and DI technologies is applied to get the best result. • Movable and flexible in transportation • The quality of product and all of equipment are in warrantee
in 24 months • 24/7 service will adapt your expect in professional way of
working and service
• All piping system are in Pharmacy Standard