armatex sf 15 - insulation manufacturermid-mountain.com/wp-content/uploads/datasheets/armatex sf...
TRANSCRIPT
Mid-Mountain Materials, Inc. • Telephone (800) 382-2208 • (206) 762-7600 • Fax (206) 762-7694PO Box 800 • 2731 - 77th Avenue SE, Suite 100 • Mercer Island, WA 98040
[email protected] • www.mid-mountain.com
THE FINAL BARRIER AGAINST ABRASION,CHEMICALS AND HEAT
ARMATEX® SF 15SILICONE COATED FIBERGLASSARMATEX® SF 15 SILICONE COATED FIBERGLASS is comprised of a light weight
per square yard. ARMATEX® SF 15 SILICONE COATED FIBERGLASS does not sup-
® SF 15 SILICONE
COATED FIBERGLASS is an ideal choice for protection of equipment and personnel.
This product is not suitable for outdoor use.
AVERAGE PHYSICAL PROPERTIES
Coating Cured Silicone Rubber
Color Various
Tensile Strength, lbs/in, nominal
Bursting Strength, psi 329
Thickness, inches, nominal 0.016
Temperature Rating
Base Fabric 1000°F • 538°C
Coating 450°F • 232°C
Weight, oz/sy, nominal 16
Width, inches 60 (+/- 5%)
Standard Roll Size 50 LY
MIL-I 24244 • MIL-Y-1140
MIL-I-24244 • ASTM E162 •E84.84a
Tolerance is +/- 10% unless otherwise stated.
The technical data presented herein are indicative of representative
No warranties are expreSFed or implied as application conditions are beyond our control.