arreglar vaio.docx

Upload: fernandohual

Post on 03-Apr-2018

219 views

Category:

Documents


0 download

TRANSCRIPT

  • 7/28/2019 arreglar vaio.docx

    1/22

    In this guide I will take apart a Sony Vaio VGN-CS215J laptop in order to

    replace failed DC jack. I think this guide will work for all other models in the

    Sony Vaio VGN-CS line.

    During this disassembly process Ill go though the following major steps:STEP 1-5: Removing laptop hard drive, DVD drive. Accessing memory

    modules.

    STEP 6-12: Disconnecting and removing laptop keyboard.

    STEP 13-16: Removing laptop bottom cover.

    STEP 17-18: Disconnecting and removing the cooling fan assembly.

    STEP 19-29: Disconnecting, removing and replacing the DC jack harness.

    Its hard to replace the DC jack on this model. If you have never fixed a laptop

    before, you dont want to start with Sony Vaio VGN-CS. I think Sony engineerstried their best to make the DC jack cable replacement as difficult as possible.

    Well they succeeded.

    STEP 1.

    Turn off the laptop. Unlock and remove the battery.

    STEP 2.

    Loosen/remove screws securing the hard drive and memory covers on the

    bottom.

  • 7/28/2019 arreglar vaio.docx

    2/22

    Lift up and remove both covers.

    STEP 3.

    Remove one screw securing the hard drive caddy to the laptop case.

  • 7/28/2019 arreglar vaio.docx

    3/22

    STEP 4.

    Slide the hard drive assembly to the left to disconnect it from the motherboard.

    Lift up and remove the hard drive.

    In my Sony Vaio VGN-CS215J laptop I had a regular 2.5 SATA hard drive

    installed.

    Both memory slots/modules accessible on the bottom.

    Its not necessary to remove memory modules for the purpose of my repair so

    Ill leave them connected to the motherboard.

  • 7/28/2019 arreglar vaio.docx

    4/22

    STEP 5.

    Remove one screw securing the DVD drive.

    Pull the DVD drive from the laptop and remove it.

  • 7/28/2019 arreglar vaio.docx

    5/22

    STEP 6.

    Remove four screw securing the keyboard on the bottom of the laptop.

    Make notes where these screws are located. Itll make your life way easierduring the reassembly process.

    STEP 7.

    Insert a piece of soft plastic under the top side of the keyboard and lift it up.

    Continue removing the keyboard with your fingers.

  • 7/28/2019 arreglar vaio.docx

    6/22

    STEP 8.

    Lift up the keyboard and turn it upside down on the palmrest. Be careful. The

    keyboard still connected to the motherboard.

    STEP 9.

  • 7/28/2019 arreglar vaio.docx

    7/22

    Now you can access the keyboard cable connector.

    In the following two steps I explain how to unlock the connector and remove

    the cable.

    STEP 10.

    The keyboard connector has a locking tab.

    Slide the locking tab about 1-2 millimeters to the shown direction. The tab must

    remain attached to the white connector base.

  • 7/28/2019 arreglar vaio.docx

    8/22

    STEP 11.

    On this picture the connector shown in the unlocked position.

    Now you can pull cable from the connector.

  • 7/28/2019 arreglar vaio.docx

    9/22

    STEP 12.

    Lift up and remove the keyboard.

    Looking for a new replacement keyboard for your Sony Vaio VGN-CSlaptop?They are available here.

    When the keyboard is removed you can access the wireless card and modem.

    http://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&pub=5574673312&toolid=10001&campid=5335918710&customid=VGN-CS+keyboard&mpre=http%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_trksid%3Dp5197.m570.l1313%26_nkw%3DSony%2BVaio%2BVGN-CS%2Bkeyboard%26_sacat%3D0http://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&pub=5574673312&toolid=10001&campid=5335918710&customid=VGN-CS+keyboard&mpre=http%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_trksid%3Dp5197.m570.l1313%26_nkw%3DSony%2BVaio%2BVGN-CS%2Bkeyboard%26_sacat%3D0http://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&pub=5574673312&toolid=10001&campid=5335918710&customid=VGN-CS+keyboard&mpre=http%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_trksid%3Dp5197.m570.l1313%26_nkw%3DSony%2BVaio%2BVGN-CS%2Bkeyboard%26_sacat%3D0
  • 7/28/2019 arreglar vaio.docx

    10/22

    STEP 13.

    Turn the laptop upside down and remove all screws located on the bottom.

    Again, keep track of all screws locations. All screws are different. You can put

    the on a piece of paper in order removed.

  • 7/28/2019 arreglar vaio.docx

    11/22

    STEP 14.

    Unplug one cable located in the memory compartment.

    STEP 15.

  • 7/28/2019 arreglar vaio.docx

    12/22

    Now you can start lifting up and removing the bottom cover.

    STEP 16.

    Remove the bottom cover.

  • 7/28/2019 arreglar vaio.docx

    13/22

    Heres laptop shown with the bottom cover removed.

    The DC jack located in the upper right corner and the cable routed under the

    heatsink.

    STEP 17.

    Remove four screw securing the cooling fan assembly (fan and heatsink).

    Disconnect fan cable from the motherboard.

  • 7/28/2019 arreglar vaio.docx

    14/22

    STEP 18.

    Lift up and remove the cooling fan assembly. Probably it needs some cleaning.

    New cooling fans for Sony Vaio VGN-CS laptopsavailable here.

    http://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&pub=5574673312&toolid=10001&campid=5335918710&customid=VGN-CS+fan&mpre=http%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_nkw%3DSony%2BVaio%2BVGN-CS%2Bfan%26_sacat%3D0%26_odkw%3DSony%2BVaio%2BVGN-CS%2Bkeyboard%26_osacat%3D0http://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&pub=5574673312&toolid=10001&campid=5335918710&customid=VGN-CS+fan&mpre=http%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_nkw%3DSony%2BVaio%2BVGN-CS%2Bfan%26_sacat%3D0%26_odkw%3DSony%2BVaio%2BVGN-CS%2Bkeyboard%26_osacat%3D0http://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&pub=5574673312&toolid=10001&campid=5335918710&customid=VGN-CS+fan&mpre=http%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_nkw%3DSony%2BVaio%2BVGN-CS%2Bfan%26_sacat%3D0%26_odkw%3DSony%2BVaio%2BVGN-CS%2Bkeyboard%26_osacat%3D0http://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&pub=5574673312&toolid=10001&campid=5335918710&customid=VGN-CS+fan&mpre=http%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_nkw%3DSony%2BVaio%2BVGN-CS%2Bfan%26_sacat%3D0%26_odkw%3DSony%2BVaio%2BVGN-CS%2Bkeyboard%26_osacat%3D0
  • 7/28/2019 arreglar vaio.docx

    15/22

    STEP 19.

    Heres one more surprise. The DC jack cable routed UNDER the metal frame.

    In order to replace the DC jack properly its necessary to disassemble the wholething apart.

    Ill replace the DC jack without taking the hole thing apart. Its not the proper

    way but Ill try it anyway.

    WARNING! You can damage the laptop doing this. If you are not sure. Stop

    right here. Im not responsible for any damage you can cause to your laptop.

    STEP 20.

    Remove five screws securing the battery board.

    Lift up the battery board to disconnect it from the motherboard (there is a

    connector underneath).

  • 7/28/2019 arreglar vaio.docx

    16/22

    STEP 21.

    Disconnect the DC jack cable from the battery board.

    STEP 22.

  • 7/28/2019 arreglar vaio.docx

    17/22

    The DC jack cable routed under the plastic part.

    Push the DC jack cable though the hole and pull on the other side at the same

    time.

    STEP 23.

    Pull the DC jack cable thought the opening again and release the cable as it

    shown on the following picture.

  • 7/28/2019 arreglar vaio.docx

    18/22

    STEP 24.

    The DC jack cable running under the video cable.

    Unplug the video cable from the motherboard and put it aside.

  • 7/28/2019 arreglar vaio.docx

    19/22

    STEP 25.

    Now continue unrouting the DC jack cable.

    STEP 26.

    Here comes the most difficult part.

    Remove all screws shown on the following picture. Again, keep track of screws.

    Be careful with the display because it will be loose.

  • 7/28/2019 arreglar vaio.docx

    20/22

    STEP 27.

    Insect a plastic stick between the top cover and metal frame and spread them

    wide enough to remove the DC jack.

    One more surprise was waiting for me. The DC jack was glued to the metal

    frame.

    I had to use a screwdriver in order to separate the cable from the frame.

  • 7/28/2019 arreglar vaio.docx

    21/22

    STEP 28.

    Finally pull the failed DC jack harness from the laptop.

    STEP 29.

  • 7/28/2019 arreglar vaio.docx

    22/22

    Now insert the new DC jack harness back in place. Its not easy but definitely

    possible.

    On the following picture I have a new DC jack installed.

    Before crewing all together, make sure all cables are routed correctly.

    I would suggest you taking close up pictures during the disassembly process.

    This will help you to route cable correctly.

    By the way, new DC jack cables for Sony Vaio VGN-CS laptopsavailable here.

    http://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&pub=5574673312&toolid=10001&campid=5335918710&customid=VGN-CS+DC+jack&mpre=http%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_nkw%3DSony%2BVaio%2BVGN-CS%2Bpower%2Bjack%2Bharness%26_sacat%3D0%26_odkw%3DSony%2BVaio%2BVGN-CS%2Bpower%2Bjack%26_osacat%3D0http://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&pub=5574673312&toolid=10001&campid=5335918710&customid=VGN-CS+DC+jack&mpre=http%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_nkw%3DSony%2BVaio%2BVGN-CS%2Bpower%2Bjack%2Bharness%26_sacat%3D0%26_odkw%3DSony%2BVaio%2BVGN-CS%2Bpower%2Bjack%26_osacat%3D0http://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&pub=5574673312&toolid=10001&campid=5335918710&customid=VGN-CS+DC+jack&mpre=http%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_nkw%3DSony%2BVaio%2BVGN-CS%2Bpower%2Bjack%2Bharness%26_sacat%3D0%26_odkw%3DSony%2BVaio%2BVGN-CS%2Bpower%2Bjack%26_osacat%3D0http://rover.ebay.com/rover/1/711-53200-19255-0/1?ff3=4&pub=5574673312&toolid=10001&campid=5335918710&customid=VGN-CS+DC+jack&mpre=http%3A%2F%2Fwww.ebay.com%2Fsch%2Fi.html%3F_nkw%3DSony%2BVaio%2BVGN-CS%2Bpower%2Bjack%2Bharness%26_sacat%3D0%26_odkw%3DSony%2BVaio%2BVGN-CS%2Bpower%2Bjack%26_osacat%3D0