www.askaynak.com.tr 0850 2 288 288

ASKAYNAK INVERTER405-ULTRA

400A at 45%

THE MOST

POWERFUL IN ITS

CLASS !

400A at 45%

Inverter 405-Ultra

5.0 mm

Low Power ConsumptionSince the power used efficiently and at optimum level, your power consumption will decrease and energy saving will be approximately 25-30%* compared to conventional rectifiers.(*) Energy saving may vary depending on operating conditions.

Ability for Working with Long CablesSince you will obtain 400A welding current even at 15% voltage drops up to 320V, you will be able to perform welding without any performance loss during the applications requiring long cables and extensions.

Superior Welding PerformanceYou will be able to achieve perfect weld beads due to uninterrupted welding with 5.0 mm diameter rutile and especially basic coated electrodes on un-alloyed, low alloyed and stainless steel materials.

Industrial DesignWelding applications under heavy working conditions conditions will not be a problem for you and your machine.

Compliance with CE NormsYou will have all advantages and guarantees offered by CE certificate and regulations regarding LVD and EMC specified in EN 60974-1 and EN 60974-10 standards.

Phase

Inverter Technology - 400A Welding Current

Warranty2 (two) years spare-parts and labor warranty.

Transparent Protective CoverAll knobs were taken to extra protection against contamination and

impact effect that may come from the outside by the transparent cover on the front panel.

Why Askaynak Inverter 405-Ultra?

Hot Start SettingYou will never encounter arc ignition problems especially when welding on dirty or rusty parts and when using electrodes with moistured coating.

Arc Force SettingElectrode will not stick to the workpiece any more or you will benefit from uninterrupted arc. Due to this feature, welding current will increase for a very short time and after the arc becomes stable it will automatically return to the adjusted value.

Digital AmpermeterIt is possible to start welding operation with a more accurate setting after reading the adjusted current value from the indicator.

Overload and Thermal Protection Indicator Lamp Thermal protection lamp will warn you in case of the machine enters protection mode due to overload.

400A Welding Current at 45% (40°C) You will be able to perform un-interrupted welding also in intense welding applications with 5.0 mm diameter electrodes and 400A welding current offered at 45% duty cycle.

Compability with GeneratorWelding capability in environments without electricity due to its compatibility with generators.

Why Askaynak Inverter 405-Ultra?

54 cm

44 cm

20,5kilograms

24 cm

High-Strength Power Supply CableWhile high-strength rubber coated power cable enable you to work safely during welding, it will decrease your repair & maintenance costs and time loss due to down times.

Specially DesignedVentilation GrillesDue to specially designed ventilation grilles located on front and rear panels and enabling optimum air circulation, the machine is water resistant in accordance with IP21S standards. Please remember that water leak into the machine is strictly inadmissible and this may cause to pose life threatening risk for you.

Operation Safety andWelding Operator Health Of course the most significant matter is your health. It offers safety operation without any serious risk for electric shock due to its 50V open-circuit voltage.

Lightweight,Smalland Compact DesignDue to its new generation electronic circuit design, it is much more smaller than the welding machines designed with old technology and you will be able to carry your 400A welding machine without any need for a cart or wheeled carrier system especially in rough, narrow and crowded environments.

Askaynak Inverter 405-Ultra Manual Metal Arc Velding MachineSpecifications

Art.

nr. 3

1/03

/201

6 - B

eyaz

Ajan

s/Ca

nO

www.askaynak.com.tr 0850 2 288 288

Kaynak Tekniği Sanayi ve Ticaret A.Ş.TOSB Otomotiv Yan Sanayi İhtisas Organize Sanayi Bölgesi, 2. Cadde, No: 5, Şekerpınar 41420 Çayırova - KOCAELİ - TURKEY

Tel: (+90.262) 679 78 00 Fax: (+90.262) 679 77 05order@askaynak.com.tr

Negative (–) Connection

Socket

Positive (+)Connection Socket

PowerIndicator Lamp

Welding CurrentAdjustement Knob

Digital Ampermeter

Overload andThermal ProtectionIndicator Lamp

Hot Start

Arc Force

Open-Circuit Voltage 50 V (DC)

Welding Current Setting Range 30 - 400 A

Fuse Value and Type 3 x 32 A (delay action)

Protection Class IP21S

Weight (excl. cables) 20.5 kg

Cooling System Ventilation cooling

Dimensions (W x H x D) 240 x 440 x 540 mm

Approvals CE, EN 60974-1, EN 60974-10

Nominal Mains Voltage 380-400 V ; 3~Ph ; 50/60 Hz

Max. Power Consumption 17.5 kW (45%)

Mains Current 26 A (45%)

Max. Effective Current 15.4 A

Power Factor (cos ) 0.96 (45%)

Welding 400 A ; 36.0 V (45%)

305 A ; 32.2 V (60%)

240 A ; 29.6 V (100%)

400A at 45%

THE MOST

POWERFUL IN ITS

CLASS !

400A at 45%