assist. prof.dr. benat kockar mechanical engineering department collaborations between iimec and...
TRANSCRIPT
ASSIST. PROF.DR. BENAT KOCKARASSIST. PROF.DR. BENAT KOCKARMECHANICAL ENGINEERING DEPARTMENTMECHANICAL ENGINEERING DEPARTMENT
Collaborations Collaborations Between Between IIMEC and Hacettepe UniversityIIMEC and Hacettepe University
1/18/2012 The International Institute for Multifunctional Materials for Energy Conversion
HACETTEPE UNIVERSITYFaculty of Engineering Department of Chemical EngineeringDepartment of Computer EngineeringDepartment of Electrical & Electronic EngineeringDepartment of Enviromental EngineeringDepartment of Food EngineeringDepartment of Geodesy and Photogrammetry EngineeringDepartment of Geological EngineeringDepartment of Industrial EngineeringDepartment of Nuclear EngineeringDepartment of Mechanical EngineeringDepartment of Mining EngineeringDepartment of Physics Engineering
1/18/2012 The International Institute for Multifunctional Materials for Energy Conversion
HACETTEPE UNIVERSITY-IIMEC ACTIVITIES
Faculty Visitors
Dr. Raymundo Arroyave (Seminers, Meetings...)
Dr. Tahir Cagin (Lectures, Meetings, Lab. Tours...) TUBITAK partial funding
1/18/2012 The International Institute for Multifunctional Materials for Energy Conversion
HACETTEPE UNIVERSITY-IIMEC ACTIVITIES
Short Term Scholars and Student Exchange
Dr. Benat Kockar (3 times, 2 joint papers published)
James Monroe (10 days in Hacettepe University)
Hande Ozcan and Vahid Attari (Winter School and Research)
Hacettepe University-IIMEC Activities
1/18/2012 The International Institute for Multifunctional Materials for Energy Conversion
SMA Workshop, Istanbul, Turkey
150 participantsUSA, Europe, Middle East, North Africa
Hacettepe University-IIMEC Activities
1/18/2012 The International Institute for Multifunctional Materials for Energy Conversion
Memorandum of Understanding Letter Signed
Hacettepe University-IIMEC Activities
1/18/2012 The International Institute for Multifunctional Materials for Energy Conversion
Current Joint ProjectsDr. Ibrahim Karaman-Dr. Benat Kockar Thermomechanical Processing of NiTi and High Temperature Shape Memory Alloys Dr. Ibrahim Karaman-Dr. Benat Kockar Fe-based SMAsDr. Ibrahim Karaman-Dr. Benat Kockar Production and Characterization of Ti-based porous SMAs
Current Joint Projects (has just been accepted)Dr. Tarak Ben Zineb-Dr. Benat Kockar Collaboration on modelling, designing, producing and characterizing NiTi porous SMAs.Student and Facult visits for two yearsElevating our funds, joint paper submission and applying for project proposal to EU FP7
Hacettepe UniversitySmart Micro/Nano Materials Reasearch Laboratory
PI: Dr. Benat Kockar
M.Sc Students:
Hande Ozcan (Porous SMAs, Surface Modification of Steel)Vahid Attari (SMA Macromodelling, Mg Alloy thermomechanical Processing)Sule Cakmak (Porous SMAs)Osman Emre Celek (100Cr6 Steel microstructure manipulation)Onur Erdogan (Bulk NiTi, TiNb, NbZr, thermomechanical processing)Halil Onat Tugrul Arif Sen
1/18/2012 The International Institute for Multifunctional Materials for Energy Conversion
Hacettepe UniversitySmart Micro/Nano Materials Reasearch Laboratory
Fundings:TUBITAK: Career Funding on Mg AlloysSANTEZ (Ministry of Industry): Steel ProcessingHACETTEPE UNIV. Scientific Council: Porous NiTi SMAsTUBITAK-International: Porous SMA Modelling and Production
1/18/2012 The International Institute for Multifunctional Materials for Energy Conversion
Submitted:TUBITAK-1002: On TiNb and NbZr alloys
Hacettepe UniversitySmart Micro/Nano Materials Reasearch Laboratory
1/18/2012 The International Institute for Multifunctional Materials for Energy Conversion
Hacettepe UniversitySmart Micro/Nano Materials Reasearch Laboratory
1/18/2012 The International Institute for Multifunctional Materials for Energy Conversion
6.0
5.0
4.0
3.0
2.0
1.0
0.0
Strai
n (%
)
140120100806040200
Stress (MPa)
As-Sintered-Irrecoverable Strain Aged at 400°C for 90 mins-Irrecoverable Strain As-Sintered-Transformation Strain Aged at 400°C for 90 mins-Transformation Strain
50.4at%Ni-Ti30% Porosity
Str
ain
(%
)
16012080400-40-80-120Temperature (ºC)
2%
50.4at%Ni-Ti30% Porosity
25MPa
50MPa
75MPa
100MPa
125MPa
2%
Strai
n (%
)
16012080400-40-80-120Temperature (°C)
25 MPa
50 MPa
75 MPa
100 MPa
125 MPa
1%
50.4at%NiTi 30% PorositySintered+Aged at 400°C for 90mins
Hacettepe University-IIMEC Activities
1/18/2012 The International Institute for Multifunctional Materials for Energy Conversion
Prospective Joint ProposalsDr. Ibrahim Karaman-Dr. Raymundo Arroyave-Dr. Uner ColakMaterial development for Energy
Industrial based activities (Technocity in Hacettepe University)Dr. Ibrahim Karaman-Dr. Benat KockarSteel and Magnesium Alloy
Next Year IIMEC Annual Meeting Invitation
1/18/2012 The International Institute for Multifunctional Materials for Energy Conversion
Antalya
Capadoccia
WAITING ALL OF YOU TO HACETTEPE UNIVERSITY
1/18/2012 The International Institute for Multifunctional Materials for Energy Conversion