atc - air traffic control - catalogue 13
DESCRIPTION
La linea VHF/UHF di SIRA include antenne (ATC) per sistemi di comunicazione, destinati al controllo del traffico aereo. Alcune caratteristiche delle nostre antenne: • omnidirezionali • a banda larga • singolo dipolo e multi dipolo • a polarizzazione verticaleTRANSCRIPT
Via Senatore Simonetta,2620867 Caponago (MB) - Italy
tel.: +39 02.95.96.11fax +39 02.95.96.13.11
e-mail: [email protected]
ATC Air Traffic Control - Catalogue 13
1
SIRA
SIRA is a privately owned company, founded in 1977 by a group of technicians active in the telecommunication field and specialized in RF technology.Sira has 11,000 sq.meters of manufacturing and support facility based in Caponago (MI) Italy.
SIRA is a customer oriented company, which has adopted the philosophy of working toge-ther with its customers to meet the critical tech-nical requirements for their systems with an attitude of enthusiasm and concern in order to provide the best results in the final products.This approach has given Sira a position of le-adership in its field. Sira products are desig-ned and manufactured in accordance with the particular international standards in force in the area.
As a major position of its cross revenues, Sira has been investing in research and develop-ment, quality and reliability control and pro-ducts safety in the RF field.This policy of investments has provided Sira with an extremely high level of experience in its field: there are Sira installations in more than 80 countries in the world.
history
2
SIRA’s aim is to give to all its customers reliable products and services with the highest quality standards, this ambitious goal is achieved mainly by means of an integrated management system (Quality-Safety-environment) and is certified according to the norms UNI EN ISO 9001 (2000) and UNI EN 14001 (1996).
The enhancement of company efficiency through the continuous improvement of the operative quality of the internal functions (effectiveness), the reduction of defects on sold products and the notable attention to the quality culture at all company levels have become SIRA’s fundamental cares.Moreover SIRA is committed in a thorough policy of environmental protection: a training and information process on all personnel is continuously carried out in order to grant a responsible management of all the activities in a special respect of the environment. For instance, the development and the implementation of new technologies, pro-ducts and production processes is carried out with a thorough control for a ra-tional use of energetic sources and of raw materials, minimizing the production of waste and the use of non-renewable resources, everything with the aim of keeping environmental impact on air and water as lowest as it is possible.For all SIRA’s activities it is fundamental to oppose the conditions of life and work which are against the health of the workers, as well as promoting freedom prin-ciples and self-respect for any human being.An extract from SIRA’s ethic code states that “Sira refuses any discrimination based on sex, race, languages, personal and social conditions, religion and political choices” and to this aim Sira promotes a working environment that, in-spired to the principles of respect, fairness and collaboration, is meant to support the involvement of all Employees and Contributors giving the common sense of responsibility in reaching all the Company goals.
quality
3
VHF and UHF broadband omnidirectional antenna Vertical Polarization 5
Multi dipole UHF omnidirectional antenna Vertical Polarization 11
Multi dipole VHF omnidirectional antenna Vertical Polarization 23
Multi dipole VHF/UHF omnidirectional antenna Vertical Polarization 29
Anti-Icing System 37
index
5
VHF and UHF broadband omnidirectional antenna Vertical Polarization
VHF And UHF broAdbAnd oMnIdIrectIonAl AntennA VertIcAl PolArIzAtIon
ANT/TBT 02-360/U
TYPE NO. TYPE
VPol Omni
VPol Omni
225-400 MHz
108-156 MHz
2 dBi
2 dBi
360°
360°
# INPUTS
1xNf
1xNf
HEIGHT
946 mm
1392 mmANT/TBT 02-360/V
tbt 02-360/V 7
tbt 02-360/U 9
7
tbt 02-360/VGroUnd to AIr coMMUnIcAtIonoMnIdIrectIonAl AntennA
electrIcAl dAtATYPEFREQUENCY RANGEIMPEDANCECONNECTORMAX POWERVSWR
POLARIZATIONGAINHALF POWER BEAMWIDTH
LIGHTNING PROTECTION
TBT 02-360/V108 ÷ 156 MHz
50 ohmNF
500 W≤ 2.0
≤ 1.6 (118÷137 MHz)Vertical2 dBi
E-plane 75°H-plane 360° (omni ± 0.3 dB)All metal parts of the antenna,
including the mounting kit and the inner conductor,are DC grounded
MecHAnIcAl dAtADIMENSIONSWEIGHT (braket excluded)WIND SURFACEWIND LOAD (wind speed 150 km/h)MAX. WIND VELOCITYICING PROTECTIONRADOME COLOURMOUNTINGPACKING
1392 x ø 82 mm7 kg
0.11 m2
120 N240 km/h
Full radomeGrey (std.), other on request
On pole1570 x 190 x 190 mm
RADIATION PATTERNS (Mid Band)
vertical polarizationbroadband 108 ÷ 156 MHz2 dbi gainomnidirectional pattern
FeAtUreS
1 dB3610
270 90
0
180
H-plane
1 dB3610
270 90
0
180
E-plane
dS 921.510.294/04 Specifications are subject to change without prior notice
8 8 dS 921.510.294/04 Specifications are subject to change without prior notice
AddItIonAl InForMAtIon
Mounting: the antenna can be attached laterally at the tip of a tubular mast of 60-120 mm diameter with two brackets supplied with the antenna (connecting cable runs outside the mast).
Materials: Radiator: Aluminium. Radome: Fiberglass, colour: Grey. Base: Weather-proof aluminium. Mounting kit, screws and nuts: Stainless steel.
PLEASE NOTE:As a result of more stringent legal regulations and judgements regarding product liability, we are obliged to point out certain risks that may arise when products are usedunder extraordinary operating conditions.The mechanical design is based on the environmental conditions as stipulated in ETS 300 019-1-4, which include the static mechanical load imposed on an antenna by wind at maximum velocity.Extraordinary operating conditions, such as heavy icing or exceptional dynamic stress (e.g. strain caused by oscillating support structures), may result in the breakage of an antenna or even cause it to fall to the ground. These facts must be considered during the site planning process.The installation team must be properly qualified and also be familiar with the relevant national safety regulations.The details given in our data sheets have to be followed carefully when installing the antennas and accessories.The limits for the coupling torque of RF-connectors, recommended by the connector manufactures must be obeyed.
9 dS 921.510.316/03 Specifications are subject to change without prior notice dS 921.510.294/04 Specifications are subject to change without prior notice
tbt 02-360/UGroUnd to AIr coMMUnIcAtIonoMnIdIrectIonAl AntennA
electrIcAl dAtATYPEFREQUENCY RANGEIMPEDANCECONNECTORMAX POWERVSWRPOLARIZATIONGAINHALF POWER BEAMWIDTH
LIGHTNING PROTECTION
TBT 02-360/U225 ÷ 400 MHz
50 ohmNF
300 W≤ 2.0
Vertical2 dBi
E-plane 75°H-plane 360° (omni ± 0.5 dB)All metal parts of the antenna,
including the mounting kit and the inner conductor,are DC grounded
MecHAnIcAl dAtADIMENSIONSWEIGHT (braket excluded)WIND SURFACEWIND LOAD (wind speed 150 km/h)MAX. WIND VELOCITYICING PROTECTIONRADOME COLOURMOUNTINGPACKING
946 x ø 82 mm6 kg
0.08 m2
85 N240 km/h
Full radomeGrey (std.), other on request
On pole1125 x 190 x 190 mm
RADIATION PATTERNS (Mid Band)
vertical polarizationbroadband 225 ÷ 400 MHz2 dbi gainomnidirectional pattern
FeAtUreS
1 dB3610
270 90
0
180
H-plane
1 dB3610
270 90
0
180
E-plane
10 dS 921.510.316/03 Specifications are subject to change without prior notice
AddItIonAl InForMAtIon
Mounting: the antenna can be attached laterally at the tip of a tubular mast of 60-120 mm diameter with two brackets supplied with the antenna (connecting cable runs outside the mast).
Materials: Radiator: Aluminium. Radome: Fiberglass, colour: Grey. Base: Weather-proof aluminium. Mounting kit, screws and nuts: Stainless steel.
PLEASE NOTE:As a result of more stringent legal regulations and judgements regarding product liability, we are obliged to point out certain risks that may arise when products are usedunder extraordinary operating conditions.The mechanical design is based on the environmental conditions as stipulated in ETS 300 019-1-4, which include the static mechanical load imposed on an antenna by wind at maximum velocity.Extraordinary operating conditions, such as heavy icing or exceptional dynamic stress (e.g. strain caused by oscillating support structures), may result in the breakage of an antenna or even cause it to fall to the ground. These facts must be considered during the site planning process.The installation team must be properly qualified and also be familiar with the relevant national safety regulations.The details given in our data sheets have to be followed carefully when installing the antennas and accessories.The limits for the coupling torque of RF-connectors, recommended by the connector manufactures must be obeyed.
11
tbt 02-360/U2 13
tbt 02-360/U3 15
tbt 02-360/U4 17
tbt 02-360/U5 19
tbt 02-360/U6 21
Multi dipole UHF omnidirectional antenna Vertical Polarization
MUltI dIPole UHF oMnIdIrectIonAl AntennA VertIcAl PolArIzAtIon
ANT/TBT 02-360/U2
TYPE NO. TYPE
VPol Omni
VPol Omni
225-400 MHz
225-400 MHz
2 dBi
2 dBi
360°
360°
# INPUTS
2xNf
3xNf
HEIGHT
2690 mm
3730 mmANT/TBT 02-360/U3
ANT/TBT 02-360/U4 VPol Omni
VPol Omni
225-400 MHz
225-400 MHz
2 dBi
2 dBi
360°
360°
4xNf
5xNf
4785 mm
5810 mmANT/TBT 02-360/U5
VPol Omni 225-400 MHz 2 dBi360° 6xNf 6850 mmANT/TBT 02-360/U6
13
tbt 02-360/U2GroUnd to AIr coMMUnIcAtIonoMnIdIrectIonAl AntennA
electrIcAl dAtATYPEFREQUENCY RANGEIMPEDANCECONNECTORMAX POWERVSWRPOLARIZATIONGAINHALF POWER BEAMWIDTH
DECOUPLINGLIGHTNING PROTECTION
TBT 02-360/U2225 ÷ 400 MHz
50 ohmNF
400 W≤ 2.0
Vertical2 dBi
E-plane 75°H-plane 360°
>27 dBThe metal parts of the antenna,
including the mounting kit and the inner conductors are DC grounded
MecHAnIcAl dAtADIMENSIONSWEIGHT WIND SURFACEWIND LOAD (wind speed 150 km/h)MAX. WIND VELOCITYICING PROTECTIONRADOME COLOURMOUNTING
2690 x ø 169 mm34.5 kg0.45 m2
345 N240 km/h
Full radomeGrey (std.), other on requestOn a flanged supporting pipe
Flange 290 mm diameter
dS 921.120.114/01 Specifications are subject to change without prior notice
RADIATION PATTERNS (Mid Band)
vertical polarizationbroadband 225 ÷ 400 MHz2 dbi gainomnidirectional multi-element antenna consisting of two indipendently fed UHF dipoles
FeAtUreS
1 dB3610
270 90
0
180
H-plane
1 dB3610
270 90
0
180
E-plane
1414 dS 921.120.114/01 Specifications are subject to change without prior notice
AddItIonAl InForMAtIon
Mounting: the antenna can be attached on the top of a flanged supporting pipe.
Materials: Radiator: Aluminium, brass. Radome: Fiberglass, colour: grey. Base: Hot dip galvanized steel. All screws and nuts: Stainless steel.
PLEASE NOTE:As a result of more stringent legal regulations and judgements regarding product liability, we are obliged to point out certain risks that may arise when products are usedunder extraordinary operating conditions.The mechanical design is based on the environmental conditions as stipulated in ETS 300 019-1-4, which include the static mechanical load imposed on an antenna by wind at maximum velocity.Extraordinary operating conditions, such as heavy icing or exceptional dynamic stress (e.g. strain caused by oscillating support structures), may result in the breakage of an antenna or even cause it to fall to the ground. These facts must be considered during the site planning process.The installation team must be properly qualified and also be familiar with the relevant national safety regulations.The details given in our data sheets have to be followed carefully when installing the antennas and accessories.The limits for the coupling torque of RF-connectors, recommended by the connector manufactures must be obeyed.
Two eyebolts for an easylifting of the antenna
15
tbt 02-360/U3GroUnd to AIr coMMUnIcAtIonoMnIdIrectIonAl AntennA
electrIcAl dAtATYPEFREQUENCY RANGEIMPEDANCECONNECTORMAX POWERVSWRPOLARIZATIONGAINHALF POWER BEAMWIDTH
DECOUPLING (between adjacent dipoles)LIGHTNING PROTECTION
TBT 02-360/U3225 ÷ 400 MHz
50 ohmNF
400 W≤ 2.0
Vertical2 dBi
E-plane 75°H-plane 360°
>27 dBThe metal parts of the antenna,
including the mounting kit and the inner conductors are DC grounded
MecHAnIcAl dAtADIMENSIONSWEIGHT WIND SURFACEWIND LOAD (wind speed 150 km/h)MAX. WIND VELOCITYICING PROTECTIONRADOME COLOURMOUNTING
3730 x ø 169 mm39 kg
0.63 m2
475 N240 km/h
Full radomeGrey (std.), other on requestOn a flanged supporting pipe
Flange 290 mm diameter
dS 921.120.119/01 Specifications are subject to change without prior notice
RADIATION PATTERNS (Mid Band)
vertical polarizationbroadband 225 ÷ 400 MHz2 dbi gainomnidirectional multi-element antenna consisting of three indipendently fed UHF dipoles
FeAtUreS
1 dB3610
270 90
0
180
H-plane
1 dB3610
270 90
0
180
E-plane
1616 dS 921.120.119/01 Specifications are subject to change without prior notice
AddItIonAl InForMAtIon
Mounting: the antenna can be attached on the top of a flanged supporting pipe.
Materials: Radiator: Aluminium, brass. Radome: Fiberglass, colour: grey. Base: Hot dip galvanized steel. All screws and nuts: Stainless steel.
PLEASE NOTE:As a result of more stringent legal regulations and judgements regarding product liability, we are obliged to point out certain risks that may arise when products are usedunder extraordinary operating conditions.The mechanical design is based on the environmental conditions as stipulated in ETS 300 019-1-4, which include the static mechanical load imposed on an antenna by wind at maximum velocity.Extraordinary operating conditions, such as heavy icing or exceptional dynamic stress (e.g. strain caused by oscillating support structures), may result in the breakage of an antenna or even cause it to fall to the ground. These facts must be considered during the site planning process.The installation team must be properly qualified and also be familiar with the relevant national safety regulations.The details given in our data sheets have to be followed carefully when installing the antennas and accessories.The limits for the coupling torque of RF-connectors, recommended by the connector manufactures must be obeyed.
Two eyebolts for an easylifting of the antenna
17
tbt 02-360/U4GroUnd to AIr coMMUnIcAtIonoMnIdIrectIonAl AntennA
electrIcAl dAtATYPEFREQUENCY RANGEIMPEDANCECONNECTORMAX POWERVSWRPOLARIZATIONGAINHALF POWER BEAMWIDTH
DECOUPLING (between adjacent dipoles)LIGHTNING PROTECTION
TBT 02-360/U4225 ÷ 400 MHz
50 ohmNF
400 W≤ 2.0
Vertical2 dBi
E-plane 75°H-plane 360°
>27 dBThe metal parts of the antenna,
including the mounting kit and the inner conductors are DC grounded
MecHAnIcAl dAtADIMENSIONSWEIGHT WIND SURFACEWIND LOAD (wind speed 150 km/h)MAX. WIND VELOCITYICING PROTECTIONRADOME COLOURMOUNTING
4770 x ø 169 mm44 kg
0.81 m2
610 N240 km/h
Full radomeGrey (std.), other on requestOn a flanged supporting pipe
Flange 290 mm diameter
dS 921.120.121/01 Specifications are subject to change without prior notice
RADIATION PATTERNS (Mid Band)
vertical polarizationbroadband 225 ÷ 400 MHz2 dbi gainomnidirectional multi-element antenna consisting of four indipendently fed UHF dipoles
FeAtUreS
1 dB3610
270 90
0
180
H-plane
1 dB3610
270 90
0
180
E-plane
1818 dS 921.120.121/01 Specifications are subject to change without prior notice
AddItIonAl InForMAtIon
Mounting: the antenna can be attached on the top of a flanged supporting pipe.
Materials: Radiator: Aluminium, brass. Radome: Fiberglass, colour: grey. Base: Hot dip galvanized steel. All screws and nuts: Stainless steel.
PLEASE NOTE:As a result of more stringent legal regulations and judgements regarding product liability, we are obliged to point out certain risks that may arise when products are usedunder extraordinary operating conditions.The mechanical design is based on the environmental conditions as stipulated in ETS 300 019-1-4, which include the static mechanical load imposed on an antenna by wind at maximum velocity.Extraordinary operating conditions, such as heavy icing or exceptional dynamic stress (e.g. strain caused by oscillating support structures), may result in the breakage of an antenna or even cause it to fall to the ground. These facts must be considered during the site planning process.The installation team must be properly qualified and also be familiar with the relevant national safety regulations.The details given in our data sheets have to be followed carefully when installing the antennas and accessories.The limits for the coupling torque of RF-connectors, recommended by the connector manufactures must be obeyed.
Two eyebolts for an easylifting of the antenna
19
tbt 02-360/U5GroUnd to AIr coMMUnIcAtIonoMnIdIrectIonAl AntennA
electrIcAl dAtATYPEFREQUENCY RANGEIMPEDANCECONNECTORMAX POWERVSWRPOLARIZATIONGAINHALF POWER BEAMWIDTH
DECOUPLING (between adjacent dipoles)LIGHTNING PROTECTION
TBT 02-360/U5225 ÷ 400 MHz
50 ohmNF
400 W≤ 2.0
Vertical2 dBi
E-plane 75°H-plane 360°
>27 dBThe metal parts of the antenna,
including the mounting kit and the inner conductors are DC grounded
MecHAnIcAl dAtADIMENSIONSWEIGHT WIND SURFACEWIND LOAD (wind speed 150 km/h)MAX. WIND VELOCITYICING PROTECTIONRADOME COLOURMOUNTING
5810 x ø 169 mm48.5 kg0.98 m2
740 N240 km/h
Full radomeGrey (std.), other on requestOn a flanged supporting pipe
Flange 290 mm diameter
07.06.2011 Specifications are subject to change without prior notice
RADIATION PATTERNS (Mid Band)
vertical polarizationbroadband 225 ÷ 400 MHz2 dbi gainomnidirectional multi-element antenna consisting of five indipendently fed UHF dipoles
FeAtUreS
1 dB3610
270 90
0
180
H-plane
1 dB3610
270 90
0
180
E-plane
2020 07.06.2011 Specifications are subject to change without prior notice
AddItIonAl InForMAtIon
Mounting: the antenna can be attached on the top of a flanged supporting pipe.
Materials: Radiator: Aluminium, brass. Radome: Fiberglass, colour: grey. Base: Hot dip galvanized steel. All screws and nuts: Stainless steel.
PLEASE NOTE:As a result of more stringent legal regulations and judgements regarding product liability, we are obliged to point out certain risks that may arise when products are usedunder extraordinary operating conditions.The mechanical design is based on the environmental conditions as stipulated in ETS 300 019-1-4, which include the static mechanical load imposed on an antenna by wind at maximum velocity.Extraordinary operating conditions, such as heavy icing or exceptional dynamic stress (e.g. strain caused by oscillating support structures), may result in the breakage of an antenna or even cause it to fall to the ground. These facts must be considered during the site planning process.The installation team must be properly qualified and also be familiar with the relevant national safety regulations.The details given in our data sheets have to be followed carefully when installing the antennas and accessories.The limits for the coupling torque of RF-connectors, recommended by the connector manufactures must be obeyed.
Two eyebolts for an easylifting of the antenna
21
tbt 02-360/U6GroUnd to AIr coMMUnIcAtIonoMnIdIrectIonAl AntennA
electrIcAl dAtATYPEFREQUENCY RANGEIMPEDANCECONNECTORMAX POWERVSWRPOLARIZATIONGAINHALF POWER BEAMWIDTH
DECOUPLING (between adjacent dipoles)LIGHTNING PROTECTION
TBT 02-360/U6225 ÷ 400 MHz
50 ohmNF
400 W≤ 2.0
Vertical2 dBi
E-plane 75°H-plane 360°
>27 dBThe metal parts of the antenna,
including the mounting kit and the inner conductors are DC grounded
MecHAnIcAl dAtADIMENSIONSWEIGHT WIND SURFACEWIND LOAD (wind speed 150 km/h)MAX. WIND VELOCITYICING PROTECTIONRADOME COLOURMOUNTING
6850 x ø 169 mm53.5 kg1.16 m2
875 N240 km/h
Full radomeGrey (std.), other on requestOn a flanged supporting pipe
Flange 290 mm diameter
dS 921.120.122/01 Specifications are subject to change without prior notice
RADIATION PATTERNS (Mid Band)
vertical polarizationbroadband 225 ÷ 400 MHz2 dbi gainomnidirectional multi-element antenna consisting of six indipendently fed UHF dipoles
FeAtUreS
1 dB3610
270 90
0
180
H-plane
1 dB3610
270 90
0
180
E-plane
2222 dS 921.120.122/01 Specifications are subject to change without prior notice
AddItIonAl InForMAtIon
Mounting: the antenna can be attached on the top of a flanged supporting pipe.
Materials: Radiator: Aluminium, brass. Radome: Fiberglass, colour: grey. Base: Hot dip galvanized steel. All screws and nuts: Stainless steel.
PLEASE NOTE:As a result of more stringent legal regulations and judgements regarding product liability, we are obliged to point out certain risks that may arise when products are usedunder extraordinary operating conditions.The mechanical design is based on the environmental conditions as stipulated in ETS 300 019-1-4, which include the static mechanical load imposed on an antenna by wind at maximum velocity.Extraordinary operating conditions, such as heavy icing or exceptional dynamic stress (e.g. strain caused by oscillating support structures), may result in the breakage of an antenna or even cause it to fall to the ground. These facts must be considered during the site planning process.The installation team must be properly qualified and also be familiar with the relevant national safety regulations.The details given in our data sheets have to be followed carefully when installing the antennas and accessories.The limits for the coupling torque of RF-connectors, recommended by the connector manufactures must be obeyed.
Two eyebolts for an easylifting of the antenna
23
tbt 02-360/V2 25
tbt 02-360/V3 27
Multi dipole VHF omnidirectional antenna Vertical Polarization
MUltI dIPole VHF oMnIdIrectIonAl AntennA VertIcAl PolArIzAtIon
ANT/TBT 02-360/V2
TYPE NO. TYPE
VPol Omni
VPol Omni
108-156 MHz
108-156 MHz
2 dBi
2 dBi
360°
360°
# INPUTS
2xNf
3xNf
HEIGHT
4785 mm
7025 mmANT/TBT 02-360/V3
25
tbt 02-360/V2GroUnd to AIr coMMUnIcAtIonoMnIdIrectIonAl AntennA
electrIcAl dAtATYPEFREQUENCY RANGEIMPEDANCECONNECTORMAX POWERVSWRPOLARIZATIONGAINHALF POWER BEAMWIDTH
DECOUPLINGLIGHTNING PROTECTION
TBT 02-360/V2108 ÷ 156 MHz
50 ohmNF
500 W≤ 2.0
Vertical2 dBi
E-plane 75°H-plane 360°
>23 dB (typical >25 dB)The metal parts of the antenna,
including the mounting kit and the inner conductors are DC grounded
MecHAnIcAl dAtADIMENSIONSWEIGHTWIND SURFACEWIND LOAD (wind speed 150 km/h)MAX. WIND VELOCITYICING PROTECTIONRADOME COLOURMOUNTING
4785 x ø 169 mm45.5 kg0.81 m2
610 N240 km/h
Full radomeGrey (std.), other on requestOn a flanged supporting pipe
Flange 290 mm diameter
dS 921.120.113/01 Specifications are subject to change without prior notice
RADIATION PATTERNS (Mid Band)
vertical polarizationbroadband 108 ÷ 156 MHz2 dbi gainomnidirectional multi-element antenna consisting of two indipendently fed VHF dipoles
FeAtUreS
1 dB3610
270 90
0
180
H-plane
1 dB3610
270 90
0
180
E-plane
2626 dS 921.120.113/01 Specifications are subject to change without prior notice
AddItIonAl InForMAtIon
Mounting: the antenna can be attached on the top of a flanged supporting pipe.
Materials: Radiator: Aluminium, brass. Radome: Fiberglass, colour: grey. Base: Hot dip galvanized steel. All screws and nuts: Stainless steel.
PLEASE NOTE:As a result of more stringent legal regulations and judgements regarding product liability, we are obliged to point out certain risks that may arise when products are usedunder extraordinary operating conditions.The mechanical design is based on the environmental conditions as stipulated in ETS 300 019-1-4, which include the static mechanical load imposed on an antenna by wind at maximum velocity.Extraordinary operating conditions, such as heavy icing or exceptional dynamic stress (e.g. strain caused by oscillating support structures), may result in the breakage of an antenna or even cause it to fall to the ground. These facts must be considered during the site planning process.The installation team must be properly qualified and also be familiar with the relevant national safety regulations.The details given in our data sheets have to be followed carefully when installing the antennas and accessories.The limits for the coupling torque of RF-connectors, recommended by the connector manufactures must be obeyed.
Two eyebolts for an easylifting of the antenna
27
tbt 02-360/V3GroUnd to AIr coMMUnIcAtIonoMnIdIrectIonAl AntennA
electrIcAl dAtATYPEFREQUENCY RANGEIMPEDANCECONNECTORMAX POWERVSWRPOLARIZATIONGAINHALF POWER BEAMWIDTH
DECOUPLINGLIGHTNING PROTECTION
TBT 02-360/V3108 ÷ 156 MHz
50 ohmNF
500 W≤ 2.0
Vertical2 dBi
E-plane 75°H-plane 360°
>23 dB (typical >25 dB)The metal parts of the antenna,
including the mounting kit and the inner conductors are DC grounded
MecHAnIcAl dAtADIMENSIONSWEIGHTWIND SURFACEWIND LOAD (wind speed 150 km/h)MAX. WIND VELOCITYICING PROTECTIONRADOME COLOURMOUNTING
7025 x ø 169 mm57.5 kg1.19 m2
895 N240 km/h
Full radomeGrey (std.), other on requestOn a flanged supporting pipe
Flange 290 mm diameter
dS 921.120.120/01 Specifications are subject to change without prior notice
RADIATION PATTERNS (Mid Band)
vertical polarizationbroadband 108 ÷ 156 MHz2 dbi gainomnidirectional multi-element antenna consisting of three indipendently fed VHF dipoles
FeAtUreS
1 dB3610
270 90
0
180
H-plane
1 dB3610
270 90
0
180
E-plane
2828 dS 921.120.120/01 Specifications are subject to change without prior notice
AddItIonAl InForMAtIon
Mounting: the antenna can be attached on the top of a flanged supporting pipe.
Materials: Radiator: Aluminium, brass. Radome: Fiberglass, colour: grey. Base: Hot dip galvanized steel. All screws and nuts: Stainless steel.
PLEASE NOTE:As a result of more stringent legal regulations and judgements regarding product liability, we are obliged to point out certain risks that may arise when products are usedunder extraordinary operating conditions.The mechanical design is based on the environmental conditions as stipulated in ETS 300 019-1-4, which include the static mechanical load imposed on an antenna by wind at maximum velocity.Extraordinary operating conditions, such as heavy icing or exceptional dynamic stress (e.g. strain caused by oscillating support structures), may result in the breakage of an antenna or even cause it to fall to the ground. These facts must be considered during the site planning process.The installation team must be properly qualified and also be familiar with the relevant national safety regulations.The details given in our data sheets have to be followed carefully when installing the antennas and accessories.The limits for the coupling torque of RF-connectors, recommended by the connector manufactures must be obeyed.
Two eyebolts for an easylifting of the antenna
29
tbt 02-360/UV 31
tbt 02-360/UVU 33
tbt 02-360/VUV 35
Multi dipole VHF/UHF omnidirectional antenna Vertical Polarization
MUltI dIPole VHF/UHF oMnIdIrectIonAl AntennA VertIcAl PolArIzAtIon
ANT/TBT 02-360/UV
TYPE NO. TYPE
VPol Omni
VPol Omni
225-400 /108-156 MHz
225-400 /108-156 /225-400 MHz
2 dBi
2 dBi
360°
360°
# INPUTS
2xNf
3xNf
HEIGHT
3650 mm
4785 mmANT/TBT 02-360/UVU
VPol Omni 108-156 /225-400 /108-156 MHz
360° 3xNf 7025 mmANT/TBT 02-360/VUV 2 dBi
31
tbt 02-360/UVGroUnd to AIr coMMUnIcAtIonoMnIdIrectIonAl AntennA
MecHAnIcAl dAtADIMENSIONSWEIGHTWIND SURFACEWIND LOAD (wind speed 150 km/h)MAX. WIND VELOCITYICING PROTECTIONRADOME COLOURMOUNTING
3650 x ø 169 mm38.5 kg0.62 m2
465 N240 km/h
Full radomeGrey (std.), other on requestOn a flanged supporting pipe
Flange 290 mm diameter
dS 921.120.116/01 Specifications are subject to change without prior notice
RADIATION PATTERNS (Mid Band)
vertical polarizationbroadband 108 ÷ 156 and 225 ÷ 400 MHz2 dbi gainomnidirectional multi-element antenna consisting of one VHF and one UHF dipole (indipendently fed)
FeAtUreS
1 dB3610
270 90
0
180
H-plane
1 dB3610
270 90
0
180
E-plane
electrIcAl dAtATYPEFREQUENCY RANGEIMPEDANCECONNECTORMAX POWERVSWRPOLARIZATIONGAINHALF POWER BEAMWIDTH
DECOUPLING
LIGHTNING PROTECTION
TBT 02-360/UV VHF: 108 ÷ 156 MHz UHF: 225 ÷ 400 MHz
50 ohmNF
500 W 400 W≤ 2.0
Vertical2 dBi
E-plane 75°H-plane 360°
at UHF >23 dB (typical >25 dB) at VHF >23 dB (typical >25 dB)
The metal parts of the antenna,including the mounting kit and the inner
conductors are DC grounded
3232 dS 921.120.116/01 Specifications are subject to change without prior notice
AddItIonAl InForMAtIon
Mounting: the antenna can be attached on the top of a flanged supporting pipe.
Materials: Radiator: Aluminium, brass. Radome: Fiberglass, colour: grey. Base: Hot dip galvanized steel. All screws and nuts: Stainless steel.
PLEASE NOTE:As a result of more stringent legal regulations and judgements regarding product liability, we are obliged to point out certain risks that may arise when products are usedunder extraordinary operating conditions.The mechanical design is based on the environmental conditions as stipulated in ETS 300 019-1-4, which include the static mechanical load imposed on an antenna by wind at maximum velocity.Extraordinary operating conditions, such as heavy icing or exceptional dynamic stress (e.g. strain caused by oscillating support structures), may result in the breakage of an antenna or even cause it to fall to the ground. These facts must be considered during the site planning process.The installation team must be properly qualified and also be familiar with the relevant national safety regulations.The details given in our data sheets have to be followed carefully when installing the antennas and accessories.The limits for the coupling torque of RF-connectors, recommended by the connector manufactures must be obeyed.
Two eyebolts for an easylifting of the antenna
33
tbt 02-360/UVUGroUnd to AIr coMMUnIcAtIonoMnIdIrectIonAl AntennA
MecHAnIcAl dAtADIMENSIONSWEIGHTWIND SURFACEWIND LOAD (wind speed 150 km/h)MAX. WIND VELOCITYICING PROTECTIONRADOME COLOURMOUNTING
4690 x ø 169 mm43.5 kg0.79 m2
600 N240 km/h
Full radomeGrey (std.), other on requestOn a flanged supporting pipe
Flange 290 mm diameter
dS 921.120.115/01 Specifications are subject to change without prior notice
RADIATION PATTERNS (Mid Band)
vertical polarizationbroadband 108 ÷ 156 and 225 ÷ 400 MHz2 dbi gainomnidirectional multi-element antenna consisting of one VHF and two UHF dipoles (indipendently fed)
FeAtUreS
1 dB3610
270 90
0
180
H-plane
1 dB3610
270 90
0
180
E-plane
electrIcAl dAtATYPEFREQUENCY RANGEIMPEDANCECONNECTORMAX POWERVSWRPOLARIZATIONGAINHALF POWER BEAMWIDTH
DECOUPLING
LIGHTNING PROTECTION
TBT 02-360/UVU VHF: 108 ÷ 156 MHz UHF: 225 ÷ 400 MHz
50 ohmNF
500 W 400 W≤ 2.0
Vertical2 dBi
E-plane 75°H-plane 360°
UHF - UHF >25 dB UHF - VHF at UHF >24 dB (typical >25 dB) UHF - VHF at VHF >22 dB (typical >25 dB)
The metal parts of the antenna,including the mounting kit and the inner
conductors are DC grounded
3434 dS 921.120.115/01 Specifications are subject to change without prior notice
AddItIonAl InForMAtIon
Mounting: the antenna can be attached on the top of a flanged supporting pipe.
Materials: Radiator: Aluminium, brass. Radome: Fiberglass, colour: grey. Base: Hot dip galvanized steel. All screws and nuts: Stainless steel.
PLEASE NOTE:As a result of more stringent legal regulations and judgements regarding product liability, we are obliged to point out certain risks that may arise when products are usedunder extraordinary operating conditions.The mechanical design is based on the environmental conditions as stipulated in ETS 300 019-1-4, which include the static mechanical load imposed on an antenna by wind at maximum velocity.Extraordinary operating conditions, such as heavy icing or exceptional dynamic stress (e.g. strain caused by oscillating support structures), may result in the breakage of an antenna or even cause it to fall to the ground. These facts must be considered during the site planning process.The installation team must be properly qualified and also be familiar with the relevant national safety regulations.The details given in our data sheets have to be followed carefully when installing the antennas and accessories.The limits for the coupling torque of RF-connectors, recommended by the connector manufactures must be obeyed.
Two eyebolts for an easylifting of the antenna
35
tbt 02-360/VUVGroUnd to AIr coMMUnIcAtIonoMnIdIrectIonAl AntennA
MecHAnIcAl dAtADIMENSIONS (mm)WEIGHT (kg)WIND SURFACE (m2)WIND LOAD (wind speed 150 km/h) (N)MAX. WIND VELOCITYICING PROTECTIONRADOME COLOURMOUNTING
6300 x ø 169 mm52.51.06805
240 km/hFull radome
Grey (std.), other on requestOn a flanged supporting pipe
Flange 290 mm diameter
dS 921.120.125/01 Specifications are subject to change without prior notice
RADIATION PATTERNS (Mid Band)
vertical polarizationbroadband 108 ÷ 156 and 225 ÷ 400 MHz2 dbi gainomnidirectional multi-element antenna consisting of one UHF and two VHF dipoles (indipendently fed)
FeAtUreS
1 dB3610
270 90
0
180
H-plane
1 dB3610
270 90
0
180
E-plane
electrIcAl dAtATYPEFREQUENCY RANGEIMPEDANCECONNECTORMAX POWERVSWRPOLARIZATIONGAINHALF POWER BEAMWIDTH
DECOUPLING
LIGHTNING PROTECTION
TBT 02-360/VUV VHF: 108 ÷ 156 MHz UHF: 225 ÷ 400 MHz
50 ohmNF
500 W 400 W≤ 2.0
Vertical2 dBi
E-plane 75°H-plane 360°
VHF - VHF >22 dB (typical >25 dB) VHF - UHF at VHF >25 dB VHF - UHF at UHF >22 dB (typical >25 dB)
The metal parts of the antenna,including the mounting kit and the inner
conductors are DC grounded
36 dS 921.120.125/01 Specifications are subject to change without prior notice
AddItIonAl InForMAtIon
Mounting: the antenna can be attached on the top of a flanged supporting pipe.
Materials: Radiator: Aluminium, brass. Radome: Fiberglass, colour: grey. Base: Hot dip galvanized steel. All screws and nuts: Stainless steel.
PLEASE NOTE:As a result of more stringent legal regulations and judgements regarding product liability, we are obliged to point out certain risks that may arise when products are usedunder extraordinary operating conditions.The mechanical design is based on the environmental conditions as stipulated in ETS 300 019-1-4, which include the static mechanical load imposed on an antenna by wind at maximum velocity.Extraordinary operating conditions, such as heavy icing or exceptional dynamic stress (e.g. strain caused by oscillating support structures), may result in the breakage of an antenna or even cause it to fall to the ground. These facts must be considered during the site planning process.The installation team must be properly qualified and also be familiar with the relevant national safety regulations.The details given in our data sheets have to be followed carefully when installing the antennas and accessories.The limits for the coupling torque of RF-connectors, recommended by the connector manufactures must be obeyed.
Two eyebolts for an easylifting of the antenna
38
ANTI-ICING SYSTEM
SIrA has developed an anti-icing system to be connected to the base flange of the multi coaxial dipole VHF/UHF antennas. this anti-icing system allows the control of the hot air flow inside the antenna radome.
MAIn FeAtUreS oF tHe SIrA SolUtIon:
AntI-IcInG kIt
cAllInG AIr-IntAke
Hot AIr
the system is designed only using passive components insidethe antenna(no maintenance).
distribution of the heating over the entire length of the antenna.
the activation of the remote control can be made through rS232 or tcP-IP. ON
HEATING RADOME
the AntI-IcInG system modulates heating power in accordance to the external environmental conditions.
reduction of energy consumptionredundancy of system’s components
39
ANTI-ICING SYSTEM
ScHeMAtIc block - MASter And SlAVe
Multi coaxial dipole VHF/UHF antennas
1 2 3 N
the system is based on a programmable logic controller (Plc) that receives data from a professional weather station on temperature and frost conditions.
Professional Weather Station with calibration certificate.
reSIStAnce
FAn
PoWer SUPPlY
reMote control
SlAVe > PlUG And PlAY
MASTER
40
ANTI- ICING SYSTEM
trIAl terMInIllo – SIte MoUntAIn 2000 M
Multi coaxial dipole antennas UVUHeight = 4.7 mt
Anti-Icing systemremote control
ProfessionalWeather Station