ATL ANTIC SERIES FRONT LOADER ®

It’s rugged. Heavy duty. And built to take on your most demanding routes.

� Maximizes efficiency with a fast pack cycle that keeps the 12-cubic-yard hopper clear at all times, saving time on densely populated routes

� Exclusive McNeilus® Excalibre™ cylinders feature a patented tool steel shaver, field-proven seals and nitrided rods that drastically reduce hydraulic contamination

� Flat body and hopper floor provide a supremely strong base and offer premier payload carrying capacity

� Compaction force of 118,800 pounds packs almost any type of refuse you can throw at it

� 10,000-lb-rated arm capacity does the heavy lifting for you

� Eight-point locking tailgate ensures it stays shut and eliminates leakage

� McNeilus’ NGEN Tailgate CNG system available for the Atlantic in 60, 70, 90 and 105 DGE capacities, as well as other NGEN CNG configurations

BODY SPECIFICATIONSBody Floor 3/16 in. AR200Body Roof 10-gauge AR200Body Side Walls 1/8 in. AR450

HOPPER SPECIFICATIONSHopper Capacity 12 cu ydHopper Floor 1/4 in. AR400Upper Hopper Sides 3/16 in. AR200Lower Hopper Sides 3/16 in. AR400Hopper Width 84 in

PACKER/EJECTOR SPECIFICATIONSLower Face Plate 5/16 in. AR200Upper Face Plate 3/16 in. AR200Packing Panel Floor Tracks 3/8 in. grade 50 high-strength steelTop and Side Wear Strips 1/4 in. AR400Bottom Wear Strips 1/4 in. X-Wear

TAILGATE SPECIFICATIONSTailgate Rear and Side Walls 1/8 in. AR450Eight-Point Automatic Locking Tailgate

HYDRAULICSPump Vane or gear with pack-on-the-go flow

control systemControl Valves Parker VA35, MRV setting—2,500 psiOil Reservoir Capacity 50 gallonReturn Filter 5 micronSuction Strainer 100 mesh stainless steel

with magnets

CYLINDERSEjector Cylinder (36-40 yd) 5-1/2 in. 3-stage 164 in.

(43-45 yd) 5-1/2 in. 3-stage 181 in.Arm Cylinder 4-1/2 in. bore x 2-1/2 in. rod x 46

in. strokeFork Cylinder 3-1/2 in. bore x 2 in. rod x 26

in. strokeTailgate Cylinder 3-1/4 in. bore x 2 in. rod x 38

in. stroke

PAINTINGPacker and components steel shot blasted prior to priming with high solids epoxy primerFinish: Sikkens’ Autocoat BT LV650 Topcoat, a high-performance, high solids polyurethane

OPERATIONSMultiplexed and distributed CAN-based controls offering the best technology in the business (sealed keypads, backlit screens, operator status lights and diagnostic display)Air or Rabbit Ear Joysticks

FORKSFork Construction A36, 1.5 in x 60 in

PERFORMANCE SPECIFICATIONS (in seconds)*

WORKING RPM IDLE 1350 RPMArm Down 11 6Arm Up 10 6Fork Down 4 3Fork Up 3 3Packer Extend N/A 20Packer Retract N/A 9Ejector Extend 28 N/AEjector Retract 10 N/ATop Door Open 8 7Top Door Closed 7 6Tailgate Open 28 N/ATailgate Closed 31 N/ASeal Height 50 inCompaction Force = 118,800 pounds

*Cycle times may vary slightly

ARM ASSEMBLYArm Side Plate 1/4 in. grade 80Arm Construction Internal reinforcement

ATL ANTIC SERIES FRONT LOADER®

Rugged. Reliable. Resilient.

Your Go-To Heavy Duty Front Loader

DESCRIPTION 36 YD3 (27.5 M3) 40 YD3 (30.6 M3) 43 YD3 (32.9 M3) 45 YD3 (34.4 M3)

(A) Length: Arms Down, TG Open 487 in. 12,362 mm 487 in. 12,362 mm 521 in. 13,226 mm 521 in. 13,226 mm

(B) Length: Arms Down, TG Closed 437 in. 11,105 mm 454 in. 11,54 mm 471 in. 11,968 mm 488 in. 12,398 mm

(C) Length: Arms Stowed, TG Closed 277 in. 7,043 mm 294 in. 7,473 mm 311 in. 7,907 mm 328 in. 8,336 mm

(D) Length: Arms Stowed, TG Open 327 in. 8,301 mm 327 in. 8,301 mm 361 in. 9,164 mm 361 in. 91,64 mm

(E) Height: Arms/Fork Down 119 in. 3,012 mm 119 in. 3,012 mm 119 in. 3,012 mm 119 in. 3,012 mm

(F) Height: Arms Stowed/Forks Up 171 in. 4,349 mm 171 in. 4,349 mm 171 in. 4,349 mm 171 in. 4,349 mm

(G) Height: Tailgate Raised 182 in. 4,610 mm 182 in. 4,610 mm 182 in. 4,610 mm 182 in. 4,610 mm

Overall Body Width 102 in. 2,591 mm 102 in. 2,591 mm 102 in. 2,591 mm 102 in. 2,591 mm

E

FG

A

C

B

D

KEY DIMENSIONS: ATLANTIC SERIES FRONT LOADER®

CAN-based controls offer superior technology and convenience for operators and maintenance personnel, featuring sealed keypads, backlit screens, vehicle status lights and unmatched diagnostics capability.

Did you know up to 80% of hydraulic contaminants can enter through the packing cylinders? McNeilus-exclusive Excalibre™ cylinders help prevent hydraulic contamination with a patented tool steel shaver, field-proven seal and nitrided rods that remove problem-causing debris.

+

Powerful10,000-pound-rated arms

+

Body and tailgate built with AR450 steel for added strength and durability.

+

+McNeilus’ NGEN Tailgate CNG system offers a durable, protective exterior, easier serviceability and built-in storage compartments. Available in 60-105 DGE.

+

Eight-point automatic locking tailgate ensures it stays shut and eliminates leaks.

+

+

Flat body/hopper floor provides a supremely strong base and offers the premier payload carrying capacity of any front loader on the market.

+

When you want a front loader that will get you the most for your money, you want the McNeilus Atlantic Series. Productive and heavy duty, it’s built to take on your toughest routes.

CONTRACT #112014-MCN

McNeilus is a member of these national purchasing programs.

ATL ANTIC SERIES FRONT LOADER ®

It’s rugged. Heavy duty. And built to take on your most demanding routes.

� Maximizes efficiency with a fast pack cycle that keeps the 12-cubic-yard hopper clear at all times, saving time on densely populated routes

� Exclusive McNeilus® Excalibre™ cylinders feature a patented tool steel shaver, field-proven seals and nitrided rods that drastically reduce hydraulic contamination

� Flat body and hopper floor provide a supremely strong base and offer premier payload carrying capacity

� Compaction force of 118,800 pounds packs almost any type of refuse you can throw at it

� 10,000-lb-rated arm capacity does the heavy lifting for you

� Eight-point locking tailgate ensures it stays shut and eliminates leakage

� McNeilus’ NGEN Tailgate CNG system available for the Atlantic in 60, 70, 90 and 105 DGE capacities, as well as other NGEN CNG configurations

BODY SPECIFICATIONSBody Floor 3/16 in. AR200Body Roof 10-gauge AR200Body Side Walls 1/8 in. AR450

HOPPER SPECIFICATIONSHopper Capacity 12 cu ydHopper Floor 1/4 in. AR400Upper Hopper Sides 3/16 in. AR200Lower Hopper Sides 3/16 in. AR400Hopper Width 84 in

PACKER/EJECTOR SPECIFICATIONSLower Face Plate 5/16 in. AR200Upper Face Plate 3/16 in. AR200Packing Panel Floor Tracks 3/8 in. grade 50 high-strength steelTop and Side Wear Strips 1/4 in. AR400Bottom Wear Strips 1/4 in. X-Wear

TAILGATE SPECIFICATIONSTailgate Rear and Side Walls 1/8 in. AR450Eight-Point Automatic Locking Tailgate

HYDRAULICSPump Vane or gear with pack-on-the-go flow

control systemControl Valves Parker VA35, MRV setting—2,500 psiOil Reservoir Capacity 50 gallonReturn Filter 5 micronSuction Strainer 100 mesh stainless steel

with magnets

CYLINDERSEjector Cylinder (36-40 yd) 5-1/2 in. 3-stage 164 in.

(43-45 yd) 5-1/2 in. 3-stage 181 in.Arm Cylinder 4-1/2 in. bore x 2-1/2 in. rod x 46

in. strokeFork Cylinder 3-1/2 in. bore x 2 in. rod x 26

in. strokeTailgate Cylinder 3-1/4 in. bore x 2 in. rod x 38

in. stroke

PAINTINGPacker and components steel shot blasted prior to priming with high solids epoxy primerFinish: Sikkens’ Autocoat BT LV650 Topcoat, a high-performance, high solids polyurethane

OPERATIONSMultiplexed and distributed CAN-based controls offering the best technology in the business (sealed keypads, backlit screens, operator status lights and diagnostic display)Air or Rabbit Ear Joysticks

FORKSFork Construction A36, 1.5 in x 60 in

PERFORMANCE SPECIFICATIONS (in seconds)*

WORKING RPM IDLE 1350 RPMArm Down 11 6Arm Up 10 6Fork Down 4 3Fork Up 3 3Packer Extend N/A 20Packer Retract N/A 9Ejector Extend 28 N/AEjector Retract 10 N/ATop Door Open 8 7Top Door Closed 7 6Tailgate Open 28 N/ATailgate Closed 31 N/ASeal Height 50 inCompaction Force = 118,800 pounds

*Cycle times may vary slightly

ARM ASSEMBLYArm Side Plate 1/4 in. grade 80Arm Construction Internal reinforcement

ATL ANTIC SERIES FRONT LOADER®

Rugged. Reliable. Resilient.

Your Go-To Heavy Duty Front Loader