AUCTIONEER’S NOTEThe D.R. Dimes Company was founded in 1964 creating the fi nest examples of early American Windsor chair reproductions, and eventually grew to create authentic examples of all types of early American furniture. See drdimes.com

The 26,000 sq.ft. shop will be totally liquidated in this one-day auction event. The real estate is also going to be off ered for sale; contact the auctioneer for details.

Online bidding will be available through bidspotter.com. To participate in online bidding, you must be registered 24 hours prior to the start of the auction.

LIQUIDATION | 3-PART AUCTION

D.R. DIMESFURNITURECOMPANY

D.R. DIMESFURNITURE COMPANY

49 DIMES ROAD, NORTHWOOD, NHTIMED ONLINE-ONLY AUCTION

EQUIPMENTSaturday, December 1st at 10 a.m.Live on-site

FURNITURE INVENTORYTimed online-only biddingEnds: December 1st at 7 p.m.

REAL ESTATE 3 ParcelsTimed online-only bidding Ends: December 5th at 2 p.m.

FURNITURE INVENTORYOnline bidding ends Saturday, December 1st at 7 p.m.One hundred lots of Windsor chairs, tables, desks, king-size bed, mirrors, bookcases, kitchen island, kitchen cabinets and more.

This is the last available inventory of this legendary custom furniture maker.

INSPECTION: Friday, November 30th from 9:00 a.m. to 3:00 p.m. and Saturday, December 1st from 8:30 a.m.

PICK-UP AND REMOVAL: Sunday, December 2nd from 12 noon to 4:00 p.m. and Monday, December 3rd from 8:30 a.m. to 5:00 p.m.

TERMS: MasterCard, Visa, or check. Online buyer’s premium of 20% will be added to become the total purchase price. Payment in full must be made at pick-up. Complete terms of sale are available online.

Lic. #2089 - (603) 964-1301 - Ref. #18PM-44Auction subject to all Terms of Sale © 2018 Paul McInnis, Inc.

One Juniper Road • North Hampton, NH 03862Return Service Requested

PRESORTEDFIRST CLASSUS POSTAGE

PAIDPORTSMOUTH NH

PERMIT #182

FOLLOW US:

✓EQUIPMENT✓EQUIPMENTSaturday, December 1st at 10 a.m.✓Saturday, December 1st at 10 a.m.✓FURNITURE INVENTORY✓FURNITURE INVENTORYTimed online-only bidding✓Timed online-only bidding✓REAL ESTATE ✓REAL ESTATE 3 Parcels✓3 Parcels

TO VIEW PHOTOS OF EACH LOT AND BID ONLINE GO TO

paulmcinnis.nextlot.com

EQUIPMENT INVENTORYPLANING: SCMI S 630 24” planer (2013), Marunaka Super surfacer Royal FX 13 330mm with tooling, Marunaka Super surfacer Royal FX 225mm with tooling, SCMI 630 S 24” planer with Tersa disposable tooling head, (2) Williams & Hussy planers model W7 molder.JOINTERS: Linmac J-168 W 16” jointer, (2) Linmac CM-002 12” jointers, Porter 24” jointer with Steff power feed. SAWS: Baker model BBR-0 re-saw bandsaw with hydraulic belt feed module 13” width capacity, (2) Hendrick 24” cross-cut saws with 7 ½ HP motor, Hendrick 24” cross-cut saw with 5 HP motor, (2) Powermatic model 66 10” table saws with Biesemeyer fence, (2) Powermatic model 81 20” bandsaws, (2) Delta 14” bandsaws, 4’ x 8’ panel saw with Milwaukee skill saw, Wadkin Bursgreen model 12” AGS table saw, several Hitachi compound miter saws.SURFACE TREATMENT: SCMI model SC110 wide belt sander 44” x 91” belt, (2) Bridgewood edge belt sanders 6” x 108”, SCM L’Invincible T120C 5 HP shaper with Steff 2038 power feed 1 ¼” spindle counter-clockwise rotation, Bridgewood OVS-10B oscillating spindle sander.DRILLING & DOWELING MACHINES: Custom CNC seat drill machine - Maxym Technologies, (2) Maxym Technologies 2460 Power Arm 5’ x 2’ overhead CNC machines with Colombo high frequency 5 HP spindles, (3) Jet JDP17MF drill presses, custom high-speed leg drilling machine with 5 HP Colombo high frequency spindle.MILLING, MORTISING: SCMI T-130N shaper 7.5 HP with Steff 2048 automatic feeder, Mikron woodworking machinery 645 multi-molder MR100 (with all custom D.R. Dimes patterns and tooling), Maxym Technologies CNC Tenoner model 2400 with Colombo spindle, Bacci oscillating mortise model MOA, Advantage Machinery Company model 8083-0633 slot mortise, (2) Safety Speed Cut model TR2 panel routers with Porter-Cable 2 ¼ HP routers, (7) horizontally mounted Bosch routers with adjustable height, Jassem router table with Porter-Cable 2 ¼ HP variable speed router, Maka model DB5 horizontal mortise, Maka model SM6P vertical mortise, Jet 2 HP model JWS-34L shaper with Linmac FD-3 power feed, Jet JWS-34L 2 HP shaper with power feed with Jet model JPF-3-1 power feed, Legacy ornamental mill with Porter-Cable 7539 variable speed 2 ¼ HP router.COMPRESSORS, DUST COLLECTORS AND MISCELLANEOUS EQUIPMENT: Atlas Copco GA22FF workplace air system screw-type air compressor, Atlas Copco GA15 screw-type air compressor, (2) Aget Cyclone dust collection systems models 907-PL and 70 SN70, Powermatic model 90 variable speed 36” lathe, custom 7’ x 11’ vacuum table with VacuPress industrial hi-fl ow vacuum pump, custom semi-automated plate joiner with pneumatic air clamps and foot pedal control, Jet model 1236PS 36” machine lathe, General 645 multi-molder 5 HP, 8.5’ steamer box and electro-steam generator model LB-10.WOODWORKING: Tremendous volume of power tools to include routers, drills and sanders; electric, cordless and air powered. Japanese saws, hand planes, several Ulmia woodworking benches, pipe and other clamps. BOX TRUCK, FORKLIFTS, MATERIAL HANDLING: 2005 International 4300 26’ box truck, Hyster P60 diesel forklift, Yale GL82c 3,000 lb. propane forklift, scissor lift tables and carts, pallet jacks, rolling carts, pallet racking.LUMBER: Over 10,000 board feet of premier soft and hard wood to be sold in lots to include tiger maple, cherry, chestnut oak, butternut, poplar, and Eastern white pine in varied thicknesses.

FURNITURE PARTS: Large stock inventory of Windsor chair parts. Also being sold are D.R. Dimes patterns and part samples.FINISHED D.R. DIMES FURNITURE INVENTORY: One hundred lots of Windsor chairs, tables, desks, king-size bed, mirrors, bookcases, kitchen island, kitchen cabinets and more will be sold via a timed online-only auction. To view photos and bid online, visit paulmcinnis.nextlot.com.INSPECTION: Friday, November 30th from 9:00 a.m. to 3:00 p.m. and Saturday, December 1st from 8:00 a.m.REMOVAL: Day of sale from 1:00 p.m. to 5:00 p.m. and Monday, December 3rd from 8:30 a.m. to 5:00 p.m.TERMS: On-site buyer’s premium of 17% will be added to become the total purchase price. Online buyer’s premium of 20% will be added to become the total purchase price. Payment in full must be made the day of the auction by cash, MasterCard, Visa, or check with original letter of guarantee (see website for form). Complete terms of sale available on the website and will be posted at the auction.DIRECTIONS: From Interstate 95 in Portsmouth, NH take Route 4 West for about 30 miles to Route 107 N then left on Old Pittsfi eld Road to Dimes Road.

AUCTION COMPLETE LIQUIDATIOND.R. DIMES FURNITURE COMPANYWoodworking equipment and tools, lumber inventory, 26’ box truck, forkliftsLive on-site auction Saturday, December 1st at 10 a.m.49 Dimes Road, Northwood, NH

VISIT paulmcinnis.com FOR CATALOG AND PHOTOS.

Woodworking equipment and tools, lumber inventory, 26’ box truck, forkliftsLive on-site auction Saturday, December 1st at 10 a.m. | 49 Dimes Road, Northwood, NH

26,000 sq.ft. clear span building | 10,000 sq.ft. building | Vacant lotNorthwood, New Hampshire | Online-only bidding ends: Wednesday, December 5th at 2 p.m.All three parcels will be off ered individually.

PARCEL A (49 Dimes Road) is a 15.31± acre parcel that is improved with a 26,000± sq.ft. steel framed Butler building with 12’6” ceiling height and standing seam metal roof. Built in 1992 this single-story structure has a foot print of 250’ x 90’ with 20’ x 55’, and 60’ x 62’ expansions. The building includes (3) drive-in doors 2 are 18’w x 12’h, 1 is 8’ x 8’ and (2) 8’ x 8’ dock-height doors. There is radiant heat in the concrete fl oor as well as forced hot air by propane. The building is serviced by a 400-amp, 3 phase electrical system, includes ample LED overhead lighting and the walls and roof are insulated. Also, on this lot is a 40’ x 120’, open air, wood frame, storage building. Tax Map 213, Lot 13.

PARCEL B (33 Dimes Road) is a 2.4± acre parcel that is improved with a 10,000± sq.ft. wood frame building. Rebuilt in 1992± this building has been used for cold storage and has no existing utilities in place other than electric service. There is (1) 8’ x 8’ dock-height door and (1) 9’w x 7’h drive-in door. This could be adapted to many uses. Tax Map 213, Lot 11.

PARCEL C (Old Pittsfi eld Road) is a 4.27± acre, vacant lot with 144± feet of frontage on Old Pittsfi eld Road. This property can also be accessed by a right of way through a neighboring property. Tax Map 213, Lot 15.

PROPERTY INSPECTIONS: Friday, November 30th from 9:00 a.m. to 4:00 p.m. and by appointment with the Auctioneer.

TERMS: A $5,000 hold on a major credit card is required to register to bid. Successful bidder(s) will increase their deposit to 10% of the Total Purchase Price within 24 hours of acceptance of bid price(s). The balance will be due at closing within 45 days of the auction. A 7% Buyer’s Premium will be added to the high bid price to become the Total Purchase Price. Property is being sold free and clear of all liens by Warranty Deed. Off ered subject to seller confi rmation. The sale is subject to all terms of sale.

Broker Participation Off ered.

FOR A PROPERTY INFORMATIONPACKAGE GO TO paulmcinnis.com

NEW ENGLAND’S PREMIER AUCTION COMPANY SINCE 1976 | paulmcinnis.com | 603.964.1301

LIC. #2089 - (603) 964-1301 - REF. #18PM-45Auction subject to all Terms of Sale. © 2018 Paul McInnis, Inc.

A. 2013 SCMI s630 24 planer

B. Baker BBR-0 resaw bandsaw with hydraulic belt fed module 13 wide capacity

C. Bridgewood edge sander 6x108 belt

D. Custom CNC seat drilling machine-Maxym Technologies

E. SCMI s630 24 planer with Tersa disposable tooling head

F. Incredible stock of lumber

G. JET 2 HP Model JWS-34L shaper with Linmac FD-3 power feed

H. JET 2HP Shaper JWS-34L with JET power feed JPF-3-1

I. Linmac SCM002 12 jointer

J. Northwood hollow chisel mortiser

K. Maranuka super surfacer Royal FX 13

L. Marunaka Super surfacer Royal FX 225

M. Maxym Technologies 2460 Power Arm 5’x2’ overhead CNC machine

N. One of several Ulmia work benches

O. Mikron Woodworking Machinery. 645 Multi-molder MR100. 5HP, 3ph with D.R. Dimes custom tooling patterns and blades

P. One of two dust collectors

Q. SCMI T-130N Shaper with 7.5 HP with Steff 2048 automatic feeder

R. Porter 24 jointer with Steff power feed

S. SCM L’ivincible T120C 5 HP shaper with Steff 2038 Power feed

T. SCMI Model SC110 wide belt sander 44 X 91 belt

AUCTION REAL ESTATE AUCTIONCOMPLETE LIQUIDATIOND.R. DIMES FURNITURE COMPANY

A

F

K

O L P

R S T

M

N Q

J

G H I

B C D E

PARCEL A

PARCEL A

PARCEL B