ASSETS ORIGINALLY DESIGNATED FOR TRANSFER TO OTHER McDERMOTT FACILITIES, NOW DEEMED SURPLUS TO THEIR NEEDS

Featuring: Rare, High Quality Marine Service Equipment; Winches; (2) Reconditioned American 125 T. Crawler Cranes; Pipeline Service Equipment; Fabrication & Welding Equipment; Rolling Stock, & Much, Much More!

11426 Ventura Blvd., Studio City, CA 91604Tel: 818-508-7034/Fax: 818-508-3025

www.biditup.com Industries (1991) Inc.

AUCTIONEERS | LIQUIDATORS | APPRAISERS

Industries (1991) Inc.

AUCTIONEERS | LIQUIDATORS | APPRAISERS

Maynards www.maynards.comph 248-569-9781 • fax 248-569-9793

Auction Conducted By:

P.O. Box 369 in Ross, Ohio 45061 Office (513) 738-3311 • Fax: (513) 738-0221E-mail: info@myronbowling.comMyron Bowling, LA Lic. #1550 • Company LA Lic. #AB-223

1304 Langham Creek Drive, Suite 454, Houston, Texas 77084

EMAIL: pmi@pmi-auction.com • WEBSITE: www.pmi-auction.comRonald G. Moore, LA LIC. #851 • PMI, LA LIC. #AB-396

HOUSTON • DALLAS • ST. LOUIS

FAX: (713) 672-7905PHONE: (713) 691-4401

BUYER’S PREMIUM: 18%Read Partial Terms & Conditions on Back Page of Brochure

Surplus to the Ongoing Operations of

McDERMOTT, INC.2317 Highway 662 South

AMELIA (Morgan City Area), LOUISIANA 70380(See Directions on Back Page)

AUCTION: TUESDAY, APRIL 149:00 A.M.

INSPECTION: Monday, April 13 9:00 A.M. to 4:00 P.M. & Morning of the Sale

On-Site Bidding in Amelia (Morgan

City Area), Louisiana or Bid Via Webcast at

Live Interactive Webcast Auctions

125 T. AMERICAN CRAWLER CRANE

<VMW WIRE WINCH AND RE-SPOOLER

SKAGIT MDL. AEB-295 SINGLE DRUM WINCH

>AMCLYDE A & R WINCH SYSTEM

2003

AUCTION

RECONDITIONED

2AVAILABLE

HUGE1-DAY

2 32 3

VMW WIRE RE-SPOOLER

AMCLYDE LUCKER WINCH AND HPU

AMCLYDE A & R WINCH SYSTEM

AMCLYDE A&R WINCH SYSTEMAMCLYDE MDL. TW425 TRACTION WINCH, new 1998, 68" dia. drum, 80" dia. flange, 4.25" dia. rope, (1) layer–1,000,000 lb. SLP, 1,400 HP @ 1,780 RPM, Rexroth hyd. pwr. supply unit w/(4) 350 HP hyd. pumps, S/N RW52590116.AMCLYDE WINCH MDL. TUW-425 TAKE-UP WINCH, new 1998, 68" dia. x 84"L. drum, (1) layer–22,000 lb. SLP @ 50 SPM, (18) layers–7,600 lb. SLP @ 50 FPM, 75 HP drive motor, 12,000' drum cap., load cell, synchronized level winder, S/N RW52590184.ACCESSORIES: LOW-LOAD DECK SHEAVE, mtd. to fabricated steel deck, ELEVATED CONTROL HOUSE w/2-station weatherproof control pulpits, HEAVY FABRICATED TUBULAR STEEL LIFTING FRAME.550 T. TOTAL SYSTEM WEIGHT.

VMW WIRE DEPLOY/ RETRIEVE WINCH

MOORING WIRE DEPLOYMENT/RETRIEVAL WINCHES

VMW MDL. 91266-400 WINCH, hyd. tilt design with 90/105 deg. tilt set-tings, 300,000 lb. line pull, 225,000 lb. dynamic brake cap., 316,000 lb. tilt cap., bare drum spds: 0–20 FPM, upper and lower hyd. clamping sys-tems, 125 HP elec./hyd. system, (4) Sundstrand Mdl. 25 hyd. motors coupled to Braden SD-900A planetary gearbox, 440 v. operation, extend-ed length shore cable, fabricated steel base, S/N B170-1.VMW MOORING WIRE RESPOOLER, hyd. tilt design with 90/105 deg. tilt settings, 20,000 lb. line pull, bare drum spds.: 0–20 FPM, upper and lower hyd. clamping systems, 125 HP elec./hyd. system, 440 v. opera-tion, extended length shore cable, fabricated steel base. S/N N/A.(10) INTERCHANGEABLE SPOOLS FOR ABOVE, 215" outside dia., 130" drum dia., 68" width, 44,400 lb. bare weight, 166,300 lb. max. loaded weight with fabricated steel stands (to be offered separately).

SINGLE DRUM WINCHSKAGIT MDL. AEB-295, rebuilt in 7/2003 and converted to sngl. winch, new rebuild S/N W04103-001, 156,900 lbs. weight cap., Cummins diesel engine, twin disc torque converter unit, S/N AE2D-295A131.

LUCKER WINCH SYSTEMAMCLYDE MDL. GPM 600, new 2002, 600,000 lb. line pull, approx. 60" stroke, hyd. drive, self-contained HPU w/twin Detroit Diesel engines, S/N 10364.AMCLYDE TAKE-UP REEL, new 2002, hyd. drive, approx. 12' dia. x 72"W. btwn. flanges, S/N 1080392-1.

CLYDE MDL. CTH-12 CONSTANT TENSION HYD. TUGGER

LIEBHERR HYDRAULIC TUGGER SKAGIT HYDRAULIC TUGGER

CONSTANT TENSION HYDRAULIC TUGGERS

(4) CLYDE MDL. CTH12, 20,000 lb. SWL, Hagglund hyd. drive motor, approx. 100 HP drive motor, 440 v. operation, S/N 28788, S/N 28787, S/N 28786, S/N N/A.

HYDRAULIC TUGGERSSKAGIT MDL. HT-100-20MR, new 2007, hyd. drive motor, on original skid, S/N 11306.08.02.

LIEBHERR TYPE KSW400/746, new 2010, approx. 30" flange dia., 15-1/2" drum width, fabricated steel frame, S/N 939653501.

ELECTRIC DRIVEN HYDRAULIC

SUPPLY UNITVMW, 125 HP drive motor, quick drain hyd. reservoir system, oil cooler, weather proof controls, fabricated steel stand.

2003

2010

2007

2002

2 32 3

HEAVY STEEL TENDON TOWER

TRELLEBORG FLOTATION BUOY

MCDERMOTT TENDON BUOYANCY MODULES

HEAVY ANCHORS

PARKER SCAN WIRE ROPE NEW WIRE ROPE ON SPOOL

GANGWAY

DECK SHEAVES(2) MCKISSICK MDL. 8A-00238C-0021 GROOVED PROFILE ROLL FORGE SHEAVES, 4-sheave design w/bearings.84" DIA. X 12" V GROOVE.

ANCHORS(17) APPROX. 20,000 LB. CAP. EA., cast steel.

GANG WAYS51"W. X APPROX. 63', (3) 60'L. X APPROX. 48"W., (4) 40'L. X 48"W. all are heavy fabri-cated construction, hand rails and bar grate deck.

MISCELLANEOUS MARINE EQUIPMENT

108"W. LEVEL WIND UNIT, gear motor drive, 10 HP flange mtd. motor.

OFFSHORE WIRE ROPEPARKER SCAN ROPE, 2,745 meters of 109.6 mm, 6 x 52–CWR, 18-1960GL offshore wire, 150 T. cap. ttl. weight, on fabricated steel reel w/stands.

REDAELLI TECNA WIRE CABLE, new 2009, 41.28 mm dia., 6/25F Plus AM composition, 2,660 lb., unused on reel.

REDAELLI TECNA CORDATI OFFSHORE CABLE, 2-7/8" x 3, 516', Class C, 40 T. cap.

DB50 BOOM HANGER ROPE, 51 mm, 2" x 9,925', used, Class C, on fabricated steel reel w/reel stand.

VMW CABLE, 52 mm, used, Class A, 2" x 8,366', last used as DB50 gantry whip cable, on fabricated steel reel.

MARINE CABLE, approx. 1-1/2" cable, ap-prox. 18 T. cap. total weight of cable and reel, on fabricated steel reel.

MARINE CABLE, approx. 1-1/2" wire rope ca-ble, 21 T. cap. total weight of cable and reel.

FABRICATED STEEL REELS

(2) 130" DIA. X 96"W.; 115" DIA. X 135"W.; 118" DIA. X 65-1/2"W. w/wire rope; 10' DIA. X 60"W.; (2) 80" DIA. X 66"W.; 75" DIA. X 48"W.; (2) 79" DIA. X 80"W.; 72" DIA. X 54"W.; 72" DIA. X 67"W.; 72" DIA. X 47"W.; 120" DIA. X 79"W.

PILE PULLERSPILE LOWERING TOOLS

PILE HANDLING EQUIPMENT(2) APPROX. 40" DIA. PILE PULLERS, 22,500 lb. cap. ea., puller pins, crane bale.

OFFSHORE PIPELINE ACCESSORIES

HEAVY FABRICATED STEEL CONSTRUCTION TEN-DON TOWER, 2-layer platform, electrical controls, H.D. chain hoist, dual hyd. rams for tendon position-ing, various attachs.

MCDERMOTT PLET RACK, heavy fabricated struc-tural steel tower, assorted controls, weather proof boxes, platforms, ladders 85 T. approx. weight.

(2) APPROX. 42 T. CAP. FABRICATED STEEL TOW-ERS, various platforms and ladders.

TENDON WEIGHT, approx. 16' ht. x 17' sq., 38.8 T. cap.

FLOATATION BUOYS

TRELLEBORG ENGINEERED SYS-TEMS, steel and fiberglass con-struction, 70 KIP uplift, 4,000 FSW depth rating, 24' approx. ttl. length x 112" sq., S/N 5393-4000-0001.FLOATATION TECHNOLOGIES, 15 T. pass-thru load, fiberglass construc-tion.

TENDON BUOYANCY MODULES

(8) MCDERMOTT, originally built for the Papa Terra project in Brazil, 24' dia. x approx. 50' ttl. height w/2 main sections, 9-compartment design w/fabricated stands, valves, piping, ten-don clamps, hurricane tie-downs, 145 T. cap. (est.) weight per TBM.

(2) APPROX. 60" DIA. PILE. PULL-ERS, twin pile pins, heavy capacity crane bale.(2) APPROX. 53-1/2" DIA. LOWER-ING TOOLS, Type 2, 770 short T. cap., weighs 1,500 short T., heavy wall construction.APPROX. 53-1/2" DIA. LOWERING TOOLS, Type 1, 1,500 short T. cap., weighs 22 short T. each, heavy wall construction.(4) HYDRAULIC PILE GRIPPERS, 12" dia., 14" dia., 16" dia. and 20" dia.

17AVAILABLE

4 5

125 T. AMERICAN CRAWLER CRANE

AMERICAN TUBULAR LATTICE BOOM SECTIONS

AMERICAN TUBULAR LATTICE BOOM SECTIONS

TUBULAR LATTICE BOOM SECTIONS FOR AMERICAN CRANES

(6) 50' SECTIONS OF 94H BOOM SECTIONS; (4) 50' SECTIONS OF 72H BOOM SECTIONS; (3) 10' SECTIONS OF 72H BOOM SECTIONS; (1) 20' SECTION OF 94H BOOM SECTION; MCKIS-SICK 175 T. CAP. HEAVY CRANE BLOCK; LARGE JIB FOR AMERICAN CRANE 11250; WIDE ARRAY OF JIB BOOM SEC-TIONS FOR 94H BOOM.

STEEL OFFSHORE PIPING

ASSORTED STEEL GRILLAGE

STEEL SCRAP1-1/2" WALL STEEL OFFSHORE PIPING, 29-1/4" pipe I.D.: (19 pcs.) nomi-nally 60'L., (7 pcs.) nominally 45'L. and (9 pcs.) nominally 10'L. (total weight approx. 700,000 lbs.); (24) H.D. FABRICATED STEEL SKID WAY RUNNERS, interlocking design w/wood tops; LARGE TUBULAR MEMBERS; GIRDERS; ASSORTED PLATE STEEL up to 2-1/2" thk., large and small sizes–tremen-dous scrap opportunity; LARGE QTY. OF STRUCTURAL STEEL GRILLAGE; QTY. OF STAINLESS STEEL AND ALLOY PIPING up to 8-3/4" dia. x 20'L.

POWERED BLOCKS

(2) 38" WESTEC MDL. 40606A-00, new 2009, galvanized steel frame, 20" vulcanized steel sheave dia., hyd. press wheel system, S/N PB3809-0008, S/N PB3809-0009.

MCKISSICK 125 T. BLOCK 400 T. HYDRAULIC PIN SHACKLES

LARGE CAPACITY CHAINHEAVY CAPACITY WIRE ROPE SLINGS

MATERIAL HANDLING EQUIPMENT(2) IHC HANDLING SYSTEMS 400 T. CAP. POWERED PIN SHACKLES, new 2007, hyd. pins, quick connect hyd. fittings and valves.

DOZENS OF HUGE CAPACITY LIFTING SHACKLES, most mfg. forged steel, up to 700 T. cap., many sorted in racks.

MANY HEAVY DUTY LIFTING SLINGS UP TO 5" DIA., braided wire cable, loop ends, various lengths.

MCKISSICK 125 T. CAP. CRANE BLOCK, Mdl. 24M, 4-sheave.

TANDEMLOC 67,200 LB. CAP. SPREADER BAR, 102" overall length, (4) lower attach. points, Part No. Q2500AA-400C, S/N 90104.

(8) 3" TRI-PLATE LOAD BALANCERS, solid steel, 5-1/2" upper and lower bores on most.

(2) ABELL-HOWE 2 T. CAP. PEDESTAL JIB CRANES, approx. 6' ht. under rail, free standing design.

(3) KNAACK LARGE CAP. TOOL STORAGE BOXES, dbl. door bottom, lift-up rigging top.

HUGE QTY. OF POLY ROPE, approx. 5" dia., some new in bags; (7) 146"L. X 118"W. X 8" THK. OAK CRANE MATS, appear unused; 54" DIA. X 4" OVERBOARD SHEAVE w/matching pins; 3" DIA. HEAVY LINK CHAIN; (4) 20 T. CAP. PLATE AND GIRDER TONGS.

CRAWLER CRANES(2) AMERICAN 125 T. CAP. MDL. 9260, Cummins 855 diesel engines, 44" track pads, 2-drum hoist w/three stage torque con-verter, boom heel and tip, McKissick 125 T. cap. heavy block, S/N GS18128–McDermott Crane No. CC3099, S/N GS17792–Mc-Dermott Crane No. CC3096.NOTE: These two cranes were fully reconditioned by McDer-mott in April of 2014 and disassembled for truck shipment to their Altamira, Mexico yard. Rebuild work consists of: recondi-tioned diesel engines (1 has in-frame fresh rebuild), rebuilt torque converters, rebuilt crawler track units, and new crawler lubrication systems. (Please check our website for complete information.)(4) 50' AMERICAN #77 TUBULAR LATTICE BOOM SECTIONS, and assorted fly jib sections (to be offered separately).

2AVAILABLE

2AVAILABLE

2009

2007

RECONDITIONED

2AVAILABLE

4 5LINCOLN MDL. MD-SG2 WELDING WIRE

LINCOLN DC-400 WELDING MACHINE

NEW FLENDER GEAR BOX

HAGGLUNDS HYDRAULIC MOTORS

WOUND STAINLESS HYD. HAMMER HOSE

NEW ELECTRICAL MOTOR

PARKER OIL FILTRATION UNIT

NEW WICHITA HYDRAULIC CLUTCH

WELDERS(10) MILLER INVISION MDL. 456P DC INVERTER ARC WELDING POWER SUPPLIES, 450 amps @ 38 v., 100% duty cycle, (1) w/roller stand and wire feeder.(9) LINCOLN POWERWAVE MDL. 455 WELDING POWER SUPPLIES, 450 amps @ 38 v., 100% duty cycle.(2) LINCOLN MDL. DC400 WELDING POWER SUPPLIES, 400 amps @ 36 v., 100% duty cycle.(7) MILLER MDL. SRH444 WELDING POWER SUP-PLIES, 400 amps @ 36 v., 60% duty cycle, in fabricated steel frame w/leads.(4) MILLER INVISION MDL. 304P DC INVERTER ARC WELDING POWER SUPPLIES, 300 amps @ 32 v., 100% duty cycle.

WELDING WIRE(500) BOXES OF NEW LINCOLN ELECTRIC MDL. MD-SG2, .040" dia., on skids.

VERNON TOOL PIPE CONVEYOR

VERNON END PREP STATION, approx. 40' linear infeed pwr. V-roll conveyor, (3) 20' pwr. rotating sections w/linear rail for 5-axis gantry, Vernon rotating end prep unit for attach. to Vernon 5-axis profiling machine.(24 SECTIONS) VERNON TOOL INFEED PIPE CONVEY-OR, 30" roll spacing, gear motor drives, various section lengths up to 40'.

MISCELLANEOUS SHOP EQUIPMENT

TRINCO MDL. 40X40OSL/400PT GLOVE BOX BLAST CABINET, self-contained w/dust collector.KNUTH MDL. SSB40X GEARED HEAD DRILL, up to 1-3/4" drilling dia., #3 MT taper, rotating table w/pwr. elevation.CUSTOM 55 GAL. CAP. HYDRAULIC DRUM CRUSHER, self-contained hyd. system, joystick controls.

MOTORSHAGGLUNDS TYPE BB84BS0-000 HYDRAULIC MOTOR, Batch No. 48/9418, brake band.

HAGGLUNDS TYPE MB34 33800-B1 LN 0200 HY-DRAULIC MOTOR.

MARATHON ELECTRIC DRIVE MOTOR, 250 HP, 1,785 RPM, TEF, Frame No. 447/449TS.

GENERAL ELECTRIC MOTOR, 50 HP, 1,790 RPM, TEF, Frame No. 445T6C, unused on skid.

TECO INDUCTION MOTOR, 100 HP.

(2) FLANGE MOUNT INDUCTION MOTORS, 75 HP.

GENERAL ELECTRIC ENERGY SAVER MDL. XSD ULTRA, 150 HP, 1,790 RPM, Frame No. 451S, new.

REPAIR PARTS & ACCESSORIES

FLENDER NO. 4320075-0020-001 HEAVY DUTY GEAR BOX, Type H3 SH 13 B, 1,750 RPM input, 34.34 RPM output, new and unused on skid.

HYDRAULIC SPECIALISTS INC. MDL. P24P3R-1C5A2A HYDRAULIC PUMP, S/N 210397.

PARKER FILTRATION MDL. PVS600 OIL PURIFI-CATION SYSTEM, rebuilt on skid.

SEVERAL 100' OF HIGH PRESSURE WOUND STAINLESS STEEL HYDRAULIC PILE HAMMER SUPPLY HOSE, approx. 6" dia.

(6) HEAVY WALL STEEL CONSTRUCTION TANK DOMES, approx. 66" dia., lifting bale.

WICHITA MDL. 6324 310 101 0000 HYDRAULIC CLUTCH, new on skid, S/N 09 448532 00 001.

AIR COMPRESSOR REPLACEMENT PARTS; AS-SORTED SPARE PARTS FOR MCDERMOTT PIPE VESSELS, descriptions and sizes, in numerous box-es; LARGE ASSORTMENT OF PARTS FOR WINCH-ES, new brake bands for high capacity winches; LARGE SPROCKETS AND GEARS for hoists.

500

BOXES

UNUSED

REBUILT

UNUSED

UNUSED

6 76 7

GENERATOR SHACK20’ CONNEX CONTAINER ARRANGED AS GENERATOR UNIT, Simplex generator unit, Detroit Diesel engine, 220 v./480 v. output, Mdl. VR-1FR.

ROTARY SCREW AIR COMPRESSORINGERSOLL RAND MDL. SSR-EP200, new 2001, 892 CFM cap., 200 HP motor, air cooled, skid mtd., noise enclosure, S/N F38198U01279.

NEW COMMERCIAL AIR CONDITIONER SYSTEMS(4) RHEEM MDL. SAWE-241NAZ956 AIR HANDLER UNIT.APPROX. (6) RHEEM MDL. CAFUO20B, 2,030 CFM, new on skid.

MISCELLANEOUS SHOP & WAREHOUSE EQUIPMENTWASHER AND DRYER SET (NEW); RADIATORS; CRANE RESISTOR BANKS; CIRCULATOR FANS; FIRE EXTINGUISHERS; ENERPAC PORTABLE ELECTRIC HYDRAULIC PUMP UNIT; EX-PANSION JOINTS; 24" X 48" X 48" FOAM FLOATS; ELECTRICAL ENCLOSURES; SHORE POW-ER CABLES; ALLEN BRADLEY CIRCUIT BREAKER BOXES (NEW); SULLAIR EXHAUST MUF-FLER; NYLON ROPE SLINGS; APPROX. (50) NEW TANDEM LOK CONTAINER LIFTING LUGS w/forged bale, in case; NEW WIRE ROPE SLINGS; VEEDER-ROOT MDL. TLS300C FUEL MANAGE-MENT SYSTEM w/swipe card, on pedestal; ASSORTED STAINLESS STEEL HYDRAULIC LINES; HYDRAULIC FILTERS (new in box); HYDRODYNE HYDRAULICS MDL. 600 GRIZZLEY GEAR SET; (2) RING AND PINION GEAR SETS for Amclyde winches; ASSORTED H.D. WIRE ROPE SLINGS on spools; LARGE QTY. OF TEXTILE AIR 300 PSI AIR HOSE on skid; APPROX. (15) 11-3/4"W. X 2" THK. X 19'-18-1/2"L. OAK TIMBERS; (2) AMCLYDE HOIST REPLACEMENT GEARS.

TIMBERSHUGE QTY. OF RUBBER WRAPPED DUNNAGE MATERI-AL; HEAVY OAK TIMBERS in assorted sizes on skids; (24) 12"W. X 5" HT. X 247"L. HEAVY OAK TIMBERS; (9) 12" X 12" X 97"L. TIMBERS; (34) 12" X 5" X 132"L. OAK TIM-BERS; (150) 9" X 2" X 249"L. OAK TIMBERS.

STORAGE TANKS16,645 GAL. CAP. DIESEL TANK, spill containment unit, overhead shed, diesel pump and refueling center.

250 GAL. CAP. DIESEL TANK, containment vessel, cover.

APPROX. 10,000 GAL. CAP. OIL TANK, steel containment vessel, clean-out access port, access ladder, skid mtd.

APPROX. 300 GAL. CAP. OIL TANK, containment vessel.

(3) 300 GAL. OIL LUBE STORAGE TANKS, Black Knight tank gauges, pneu. fuel pumps, filler nozzles, reciprocating type air compressor, storage accumulator, 250 gal. horiz. oil storage tank w/pump, filler nozzle, containment vessel, under environmental shield.

PORTABLE BUILDINGS20'L. X 12'W. PORTABLE BUILDING, window A/C unit, precast approach steps, refrigerator, conference room, assorted office furnishings.

24'W. X 18' DP. CARPORT SHED, approx. 8' eave ht., lighting.

APPROX. 30'L. X 12'W. PORTABLE RESTROOM FACILITY, featuring mens and womens restrooms, holding tank, pumps and plumbing fixtures, steel skid base mtd.

APPROX. 10'W. X 16' DP. PORTABLE STEEL FABRICATED SHED, 8' eave ht.

GENERATOR SHACK 16,000 GAL. DIESEL TANK AND COVER NEW SKIDDING TIMBERS

INGERSOLL-RAND ROTARY SCREW AIR COMPRESSOR

JOHN DEERE GATORS

NEW RHEEM AIR CONDITIONING UNITS

Surplus to the Ongoing Operations of

McDERMOTT, INC.

2317 Highway 662 SouthAMELIA (Morgan City Area),

LOUISIANA 70380(See Directions on Back Page)

On-Site Bidding in Amelia (Morgan City Area), LA or Bid Via Webcast at Live Interactive Webcast Auctions

13AVAILABLE

2001

UNUSED

200 HP

UNUSED

6 76 7FORD WATER TRUCK

SELLICK ROUGH TERRAIN FORKLIFT

PORTABLE POWER STATIONS

INTERNATIONAL LUBE TRUCK

NISSAN DIESEL FORKLIFT

JOHN DEERE TRACTOR AND TOWABLE MAGNET

ROLLING STOCK(13) JOHN DEERE GATOR 4X2 UTILITY VEHICLES, new approx. 2005, 2-wheel drive, dump bed, fully enclosed, rough terrain tires.FORD MDL. F600 WATER TRUCK, new 1987, 2-spd. trans axle, approx. 5,000 gal. water tank, Briggs & Stratton 4.75 HP gasoline pwrd. pump w/Monarch BSGF pump VIN 1FDNF60110JVA090132K.INTERNATIONAL LUBE TRUCK, 29,000 lb. G.V.W.R., large oil tank, (7) retractable hoes reels, currently eqpd. w/barrel pumps for hyd. oil, gear oil, engine oil, diesel fuel, Dextron and antifreeze, VIN 1HSH 8PPN 4NH454324.JOHN DEERE MDL. 301AD TRACTOR, John Deere Type S152DT-12 diesel engine, 3-pt. hitch, S/N 70891T.

SHIPPING CONTAINERS (2) 20' REEFER CONTAINERS, Carrier Refrigeration Systems, Marathon Electric generator sets, fully insulated, stainless steel lined interior, marked FR001, marked FR002.

(5) CONNEX 40' w/electrification, wide assortment of electrical fittings and tools.

(7) CONNEX 20', converted to tool storage and portable shop offices, some w/electrification and provision for window A/C.

CONNEX 20', specially modified for battery storage w/sprinkler unit and ventilation system.

FORKLIFTSSELLICK 8,000 LB. CAP. MDL. SD-80, diesel engine, 3-stage mast, 80" max. lift, 96"L. forks, rough terrain tires, S/N 1377906832 or S/N 876906.NISSAN ENDURO 50 MDL. KEHO2A25V, 3,875 lbs. @ 24" L.C., 191" max. lift ht., 36"L. forks, side shift.

MAN BASKETS4,300 LB. CAP., 42" x 220"; (3) 3,000 LB. CAP., 60" x 120"; 60" x 144" AND 55" x 192"; 2,100 LB. CAP., 48" x 120"; 2,000 LB. CAP., 67" sq.; (2) 1,500 LB. CAP., 60" x 108", 60" x 192; 800 LB. CAP., 49" rd.; 500 LB. CAP., 47" sq.

MISCELLANEOUS YARD EQUIPMENTHURRICANE MDL. 300 SELF-CONTAINED TOWABLE VACUUM SYSTEM, new 2011, Diahatsu diesel engine, sngl. axle trailer, drop bottom containment tank, 112 H.O.M., S/N RV24H-9384.TOWABLE YARD MAGNET, 96"W., Kohler Mdl. KD477-2 diesel engine, Contraves 3 kW DC generator.SHEEPSFOOT COMPACTOR, dbl. drum, 108" overall width, tow behind.PORTABLE POWER STATIONS: (2) 480 v./240 v. w/multiple outlets and disconnects; (2) 110 v., w/(4) disconnect boxes and (8) twist lock cord connections.(4) PORTABLE LIGHT TOWERS.HEAVY DUTY WELDED PIPE SUPPORT STANDS, approx. 20'L., tubular construction, extra H.D. design.

20' CONNEX REEFERS

HURRICANE DIESEL-POWERED VACUUM

SHEEPS FOOT COMPACTOR

AUCTION: TUESDAY APRIL 14 • 9:00 A.M.AUCTIONHUGE

1-DAY

2AVAILABLE

2011

Surplus to the Ongoing Operations of

McDERMOTT,INC.

2317 Highway 662 South

AMELIA (Morgan City Area), LA 70380(See Directions on Back Page)

AUCTION: TUESDAY APRIL 14 • 9:00 A.M.

INSPECTION: Mon., April 13, 9:00 A.M. to 4:00 P.M. & Morning of the Sale

MCDERMOTT TENDON BUOYANCY MODULES

PILE PULLERS

ASSETS ORIGINALLY DESIGNATED FOR TRANSFER TO OTHER McDERMOTT FACILITIES, NOW DEEMED SURPLUS TO THEIR NEEDS

FIRST CLASS MAIL

125 T. AMERICAN CRAWLER CRANE

QS-0025924

DIRECTIONS & LODGINGFROM LOUIS ARMSTRONG NEW ORLEANS INT’L AIRPORT: Exit airport area and turn right onto US Highway 61 N/Airline drive. Proceed westward for approx. 4 miles. Take the exit for I-310 S/Boutte. Proceed approx. 9 miles south on I-310 S and take US-90 W exit towards Houma. Proceed on US-90 W approx. 48 miles. Take Exit #182 for LA-662/US Business 90 and proceed approx. 1/2 mile. At the bottom of the ramp, turn left onto US Business 90 West and proceed approx. 7/10 mile to the stop sign. Then proceed straight ahead across the highway to where it dead ends at the “T”. Turn right and proceed 1/2 mile to the next stop sign and turn left. The auction site headquarters will be on your right. Watch for auction signs.

AMELIA EXTENDED STAY & HOTEL ........................... (985) 631-2220 111 Cajun Way, Amelia, Louisiana

HAMPTON INN & SUITES MORGAN CITY ................. (800) 992-2694 6365 Hwy. 182 E, Morgan City, Louisiana

HOLIDAY INN EXPRESS HOTEL & SUITES MORGAN CITY TIGER ISLAND .................................. (877) 410-6667 704 Martin Luther King Blvd., Morgan City, Louisiana

HOLIDAY INN MORGAN CITY ..................................... (855) 901-0002 520 Roderick Street, Morgan City, Louisiana

<PARKER OIL FILTRATION UNIT

NEW FLENDER GEAR BOX

JOHN DEERE GATORS

PARTIAL TERMS & CONDITIONS

TERMS OF SALE: Copies of Terms of Sale will be posted at the auction. Additional terms may be announced during the auction. We make every effort to accurately describe each item in the auction; however, a mistake may occur. Buyers must take responsibility to thor-oughly inspect the items on which they intend to bid. Each item will be sold “As is, where is.” There is abso-lutely no warranty or guarantee of any kind either written or implied. Occasionally, additional information may come to light regarding any and all items being sold during the auction. When this occurs the new informa-tion takes precedence.

18% BUYER’S PREMIUMINSPECTION: MONDAY, APRIL 13, 9:00 A.M.

TO 4:00 P.M. AND THE MORNING OF THE SALEREMOVAL & PAYMENT: Machinery removal is the re-sponsibility of the buyer. All equipment must be removed in accordance with the specific auction timeline and terms of sale. See the specific auction web page for de-tails. Anyone (rigger or buyer), using a powered vehicle to remove items must have a certificate of insurance on file with Myron Bowling Auctioneers in the amount of $1,000.000.00. Item removal generally begins at the conclusion of the auction and after payment in full is received by cash, wire transfer, or company check (if approved by the auction company or bank letter of guar-antee). All checks should be made payable to Myron Bowling Auctioneers. Taxes will be charged unless you have provided a proper written exemption from your state.SAMPLE BANK LETTER: Dear Sirs, (BANK NAME) irre-vocably guarantees payment in full to Myron Bowling Auctioneers by (BUSINESS NAME) drawn on account (NUMBER) up to the amount of $ (DOLLARS) to purchase items at your (AUCTION NAME). This letter of guarantee is valid until (MONTH, DAY, YEAR). Regards, (BANK REPRESENTATIVE, TITLE, BANK NAME).

UNABLE TO ATTEND?Bid online in Real Time at

Live Interactive Webcast Auctions

Register: You must register as an online bidder through Bidspotter.com, 24 hours prior to the auction start time to allow sufficient time to be approved. You'll find the Bidspotter link on the specific auction page on our Website.

Deposit: A deposit of 25% of your anticipated purchase or a bank letter of guarantee is required to bid online. Mail deposit check to: Myron Bowling Auctioneers, P.O. Box 369, Ross, Ohio 45061. Call (513) 738-3311 for wire instructions. Fax your bank letter of guarantee to (513) 738-0221.

Approval: Once the registration process has been completed and your deposit received, you will be notified through an automated Bidspotter email, that you are approved to bid.

ALL ONLINE BIDS ARE SUBJECT TO A 18% BUYER'S PREMIUM

Live Interactive Webcast Auctions

Auction conducted by:MYRON BOWLING AUCTIONEERS, INC.P.O. Box 349, Ross, Ohio 45061

PresortedFirst Class Mail

U.S. PostagePAID

Eugene, OregonPermit No. 17

13AVAILABLE

RECONDITIONED

2AVAILABLE

UNUSED

REBUILT