auto cad 2
TRANSCRIPT
E 2004/2/1Entering Command and Data Input
ENTERING COMMAND AND
DATA INPUT
OBJECTIVES
General Objective : To understand and use the methods of entering command and data
input
Specific Objectives : At the end of the unit you will be able to :
Enter command by three different methods.
Create drawing by coordinate entry.
Use Direct Distance Input to create drawing.
Create a drawing by using Absolute Cartesian Coordinate.
Create a drawing by using Relative Coordinate.
Create a drawing by using Polar Input.
Explain the deferential four methods coordinate entry.
UNIT 2
E 2004/2/2Entering Command and Data Input
2.1 HOW TO BEGIN A COMMAND
There are three possible methods for entering commands in AutoCAD depending on
your preferences setting ( for the screen menu ). Generally any one of the three
methods can be used to invoke a particular command.
1. Keyboard Type the command name, command alias, or
accelerator ( Ctrl ) keys at the keyboard
2. Pull-Down Menu Select the command or dialog box from a pull-down
menu.
3. Toolbars Select the command or dialog box by PICKing an icon
( tool ) from a toolbar
2.1.1 Keyboard.
When you enter a command in a command window, AutoCAD either displays a
dialog box or prompts you for further information. This line of Command text is
termed the Command Prompt. The Command prompt asks you to specify coordinate
value, command options, or any other data needed to complete the command. The
following text is an example of the Command prompt for the PLINE command.
INPUT 2aINPUT 2a
E 2004/2/3Entering Command and Data Input
Figure 2.1 : Example of the Command prompt.
Once you are comfortable entering commands at the Command prompt, you can
learn the command aliases, which are basic one- or two- or three- letter abbreviations
of the commands. Many commands have an aliases, and learning these can help you
work faster and more productively. A list of all the command aliases is located in the
Help menu.
2.1.2 Pull Down Menu
When you perform a Typical installation of AutoCad, you are presented with a menu
bar containing 10 menus:
Figure 2.2 : Menu Bar with 10 menus.
These menus provide an alternate method of accessing command and dialog
boxes other than the command prompt or toolbar button. They are term pull down
menu because when you choose one with your left mouse button, the menu is
display beneath its title, as if you were pulling the menu down from its title. The
menu remains present until you click anyway outside of it.
2.1.3 Toolbars
Another method of performing commands is through the various toolbar
tools. There are many tools in the 21 toolbars, but those most frequently used,
relating to file, edit and view, are found in the Standard toolbar, shown in the
following figure:
E 2004/2/4Entering Command and Data Input
Figure 2.3 : Standard Toolbars
To display other toolbars, you can access the Toolbar dialog box in the following
ways:
Toolbar : Right click any currently visible toolbar
Menu : View > Toolbars
Command : TOOLBAR
The Toolbars dialog box is displayed as shown in figure below:
Figure 2.4 : Toolbars dialog box
Clik on the box to choose any toolbars you need to use. Then, clik ‘Close’ button to end the
session.
E 2004/2/5Entering Command and Data Input
ACTIVITY 2a
FILL IN THE BLANK.
2.1 List three methods for entering command in AutoCAD R14. Explain.
i.
ii.
iii.
2.2 Give the steps to access the ‘line’ command to draw a line by using the pull down
menu.
2.3 How can we display the ‘toolbar box?
E 2004/2/6Entering Command and Data Input
Feedback To Activity 2a
ANSWERS.
2.1.
1. Keyboard Type the command name, command alias, or
accelerator ( Ctrl ) keys at the keyboard
2. Pull-Down Menu Select the command or dialog box from a pull-down
menu.
3. Toolbars Select the command or dialog box by PICKing an icon
( tool ) from a toolbar
2.2. Pull Down Menu : Draw > Line
2.3. Toolbar : Right click any currently visible toolbar
Menu : View > Toolbars
Command : TOOLBAR
E 2004/2/7Entering Command and Data Input
2.2 CREATING DRAWING BY USING
COORDINATE ENTRY
AutoCAD provides various commands that you use to locate points in the drawing
plane. You can create a drawing by using Direct Distance entry, Absolute
Coordinates, Relative Coordinates, and Polar entry methods.
2.2.1 Direct Distance Entry.
To enter point you can use a feature called direct distance entry. With direct
distance entry, you can specify a relative coordinate by moving the cursor in the
desired direction and then entering a distance.
Coordinate value are specified by moving the cursor to indicate a direction
and then entering the distance from the first point. This is useful when you need to
quickly specify a length. An efficient way to create object constrained to the current
axes is to use direct distance entry combined with Ortho mode turned on.
Direct distance entry can used with all commands except those that prompt
you to enter real values. This commands include ARRAY, MEASURE, and
DIVIDE.
2.2.2 Absolute Cartesian Coordinate Input.
Absolute coordinate system can be used when you know the exact X and Y
values of the point you want to place in the drawing window. The absolute
coordinates method uses the Cartesian coordinate system to locate points in the
drawing window. All points are measure from origin (0,0).
INPUT 2bINPUT 2b
E 2004/2/8Entering Command and Data Input
The Cartesian coordinate system has three axes X, Y, and Z that are used to
locate points and create objects. The Cartesian coordinate system uses distances ( in
unit ) to locate points along intersecting axes, the horizontal ‘X’ axes and the vertical
‘Y’ axes. The intersection of these axes called the origin, where X = 0 and Y = 0
denoted as ( 0,0). These axes divide the coordinate system into four quadrant each
having positive, negative or positive and negative X and Y values.
You can draw a line by starting at the 0,0 and end at the point 3,4
Figure 2.5 : Two dimensional Cartesian coordinate system.
World Coordinate System ( WCS )
When start a new session, by default you enter the World Coordinate System (WCS).
This system consist of a horizontal X displacement, a vertical Y displacement, and a
Z displacement that is perpendicular to the XY plane. The Z displacement is used for
3D drawing. All X,Y and Z coordinate values are measured from the origin. The
origin is located at the intersection of X, and Y axes (0,0). The origin is originally
located in the lower left corner of a drawing. The WCS cannot be redefined, and all
other user coordinate system are based on the WCS.
E 2004/2/9Entering Command and Data Input
User Coordinate System ( UCS )
The User Coordinate System ( UCS ) lets you establish your own coordinate
origin. The UCS is movable, meaning that the origin can be moved to any desired
orientation and its axes can be rotated. The UCS icon is displayed by default in the
lower left corner of the drawing window. The icon is used to help better
understanding the location and orientation of the movable UCS. The X and Y arrows
point in the positive direction of the axis. The W in the following figure indicates the
WCS is current. The UCS icon is shown in the following figure:
Figure 2.6 : UCS icon
Method for invoking the UCS command include:
Toolbar : Standard
Menu : Tools > UCS
Command : UCS
Relative Cartesian Coordinate Input.
A relative Cartesian coordinate is entered as the X and Y distance from the
last point you specified. Use relative X,Y coordinate when you know the position of
a point in relation to the previous point. For example, to locate a point at a relative
direction of 4,5 from the first point specified, precede the next coordinate with the @
symbol. The following example demonstrate how to enter a relative coordinate:
E 2004/2/10Entering Command and Data Input
At the command prompt, enter line.
In response to the From point command prompt, enter 0,0
In response to the To point command prompt, enter @4,5.
Figure 2.7 : example to entering relative coordinate
Polar Input
A polar coordinate is entered as a relative distance and angle from an absolute
coordinate or the last point specified.
To enter a polar coordinate, enter a distance and an angle, separated by an
angle bracket (<). For example to specify a point that is at a distance of 2.5 units
from the previous point and an angle of 45 degree, enter @ 2.5 < 45.
By default, angles increase in the counterclockwise direction and decrease in
the clockwise direction. To move clockwise, enter a negative value for the angle. For
example, entering @3<-45 is the same as entering @3<315.
E 2004/2/11Entering Command and Data Input
Figure 2.8 : Polar coordinate angles
E 2004/2/12Entering Command and Data Input
ACTIVITY 2a
ANSWER ALL THE QUESTIONS BELOW.
2.4
figure 3.7
a) Refer to the figure 3.7, determine
1) the polar coordinate of Point “E” from Point “D”
2) the absolute coordinate of the center of circle “I”
3) the polar coordinate of Point “A” from Point “H”
E 2004/2/13Entering Command and Data Input
b. Supply the appropriate absolute, relative and/or Polar coordinates for these
`figure in the matrix below each object.
9 8
7
10
6
54
11
1213
1415
32
1/17 16
E 2004/2/14Entering Command and Data Input
FEEDBACK TO ACTIVITY 2b
ANSWERS
2.4
a)
1. @4 < 90
2. 6,10
3. @12 < 270 / @12 < -90
b)
0.5,5.0 @ 0, 5.0 @5 <902.5 , 5.0 @ 2.0, 0 @ 2<0
2.5 , 7.0 @ 0, 2.0 @ 2 < 90
@ 2 < 0
9.5 , 7.0 @ 7.0 , 0 @ 7 < 0
@ 0 , -2.09.5 , 5.0@ 2.0 , 011.5 , 5.0
@ 2 < 270
@ 1 < -90
11.5 , 0.5 @ 5 < 270@ 0 , -5.0@ -1.5 , 010.0 , 0.5 @ 1.5 < 180
@ 3.3 < 180
6.8 , 2.5
10.0 , 3.5 @ 0 , 3.56.8 , 3.5
@ 3.5 < 90@ -3.3 , 0@ 0 , -1.0
5.0 , 2.5 @ -1.5 , 0 @ 1.5 < 180
@ -3.3 , 0
2.0 , 0.5
5.0 , 3.5 @ 0 , 1.0 @ 1 < 90
2.0 , 3.5 @ 3.3 < 180@ 3.5 < 270@ 0 , 3.5
@ 1.5 < 180@ -1.5 , 00.5 , 0.5
E 2004/2/15Entering Command and Data Input
SELF- ASSESSMENT
ANSWER ALL THE QUESTIONS BELOW
QUESTION 2-1
a) List all the way to create the drawing by coordinate entry.
b) Explain the methods to entering command.
QUESTION 2-2
a) Construct one-view drawings of the following figure using the LINE command along with coordinate or direct distance modes.
E 2004/2/16Entering Command and Data Input
b) Complete the table below with Absolute and Relative Coordinate according to figure below.
E 2004/2/17Entering Command and Data Input
FEEDBACK TO SELF-ASSESSMENT
ANSWERS.
QUESTION 2-1.
a) CREATING DRAWING BY USING COORDINATE ENTRY
AutoCAD provides various commands that you use to locate points in the drawing
plane. You can create a drawing by using Direct Distance entry, Absolute
Coordinates, Relative Coordinates, and Polar entry methods.
b) There are three possible methods for entering commands in AutoCAD depending on
your preferences setting ( for the screen menu ). Generally any one of the three
methods can be used to invoke a particular command.
1. Keyboard Type the command name, command alias, or
accelerator ( Ctrl ) keys at the keyboard
2. Pull-Down Menu Select the command or dialog box from a pull-down
menu.
3. Toolbars Select the command or dialog box by PICKing an icon
( tool ) from a toolbar
E 2004/2/18Entering Command and Data Input
2-2
b)
2.0 , 3.75 @ 0 , 1.75
2.5 , 3.75 @ 0.5 , 0
2.5 , 4.50
4.5 , 4.5 @ 2.0 , 0
5.5 , 4.0
@ 0 , 0.5
@ 1 , -0.5
3.65 , 3.25
4.5 , 0
@ 0 , -1
2.0 , 2.0
@ -1 , -15.5 , 3.0
@ 2.5 , 0
3.65 , 3.25