automation_2004_i_o_Ñîåä_b7a
TRANSCRIPT
439Link Terminals
Pro
gra
mm
able
C
on
tro
llers
B7A
Link Terminals
The B7A Link terminal system provides simple 2-wire point-to-point serial links to replace parallel I/O wiring. No adress setting or configu-ration is required.There are models of B7A Link Terminals available for most applicati-ons, including the 32-point Terminal (Screw Terminal model), 16-point Terminals (Screw Terminal, Module, and Hybrid IC models), PLC Con-nector models (with 16 I/O points or 32 I/O points), Mixed I/O Terminals
(16 inputs and 16 outputs or 8 inputs and 8 outputs), 10-point Terminals (Screw Terminal, Module, and FA Connector models), and PLC Unit models (for CQM1 PLCs or CS1/C200H PLCs.) The transmission distance is 500 m max. for the normal transmission delay time of 19.2 ms typical and 100 m max. for the high-speed trans-mission delay time of 3 ms typical.
Connecting Two Models with the Same Number of I/O Points (16-point)
Connecting Two Models with the Same Number of I/O Points (32-point)
Connecting One 32-point Model with Two 16-point Models
The following 16-point Terminals, 32-point Terminals, and PLC Connector models are available. Choose an appropriate model for your applicati-ons.
Note: There are two transmission delay time settings (the high-speed delay of 3 ms typical or normal delay of 19.2 ms typical) in the 32-point, 16- point, and PLC Connector models. Use models with the same transmission delay time settings.
B7A I/O Combinations
32-point, 16-point, and PLC Connector Models
16-point Input (Transmission) Model 16-point Output (Reception) Model
32-point Input (Transmission) Model 32-point Output (Reception) Model
32-point Input (Transmission) Model 16-point Output (Reception) Model
16-point Output (Reception) Model
16-point Input (Transmission) Model
16-point Input (Transmission) Model
32-point Output (Reception) Model
Screw Terminal Model (16 points) Modular Model (16 points) Hybrid IC Model (16 points) PLC Connector Model (16 points)
PLC Connector Model (32 points) Screw Terminal Model withRelay Outputs (16 points)
Note: Only normal I/O delay time (19.2 ms typical) is available.
440 Programmable Controllers
Connecting to 16-point Terminals
Connecting Two B7AM Models
The following 16-point Terminals, 32-point Terminals, and PLC Connector models are available. Choose an appropriate model for your applicati-ons.
Note: Set the I/O delay time setting switch to the setting of B7A Terminals used in combination.
Mixed I/O Model (B7AM)
I/O Combination Screw Terminal Model(16 inputs, 16 outputs)
16-point Output (Reception) Model
16-point Input (Transmission) Model
Input
Output
I/O Combination Screw Terminal Model(16 inputs, 16 outputs)
I/O Combination Screw Terminal Model(16 inputs, 16 outputs)
Screw Terminal Model(8 inputs, 8 outputs)
Screw Terminal Model(8 inputs, 8 outputs)
Input
Input
Input
Input
Output
Output
Output
Output
Screw Terminal Model (16 points) Modular Model (16 points) Screw Terminal Model withRelay Outputs (16 points)
Hybrid IC Model (16 points) PLC Connector Model (16 points)
Note: Only normal I/O delay time (19.2 ms typical) is available.
Link Terminals 441
Pro
gra
mm
able
C
on
tro
llers
Note: The 10-point model is available with the normal I/O delay time of 19.2 ms (typical) only. Since the transmission signals of the 10-point model are incompatible with the high-speed 16-point PLC connector models, the 16-point PLC connector models and 10-point models cannot be used together.
10-point Terminal Models
10-point Input (Transmission) Model 10-point Output (Reception) Model
Input (Transmission) Models Output (Reception) Models
Screw Terminal Model (10 points)
Modular Model (10 points)
M12 Input Connector Model (10 points)
Screw Terminal Model (10 points)
Modular Model (10 points)
DeviceNet Model (10 points x 3)
Note: Connect the DeviceNet model to the M12 input connector model.
442 Programmable Controllers
CJ-series B7A Interface Units
The following 16-point Terminals, 32-point Terminals, and PLC Connector models are available. Choose an appropriate model for your applicati-ons.
Note: Use B7A Interface Units and B7A Link Terminals that have the same transmission delay time settings. The transmission delay time (high-speed delay time of 3 ms typical or normal delay time of 19.2 ms typical) can be switched for B7A Interface Units and 32-point B7A screw terminal models with a section switch. Se the same transmission delay time for connected Units.
PLC Unit Models (CJ1W-B7A)
CJ1W-B7A14(64 inputs)
CJ1W-B7A04(64 outputs)
CJ1W-B7A22(32 inputs, 32 outputs)
16-point Input (Transmission) Models: 4 Units
16-point Output (Reception) Models: 4 Units
16-point Input (Transmission) Models: 2 Units 16-point Output (Reception) Models: 2 Units
Screw Terminal Model (16 points)Modular Model (16 points) Hybrid IC Model (16 points) PLC Connector Model (16 points)
PLC Connector Model (32 points) Screw Terminal Model withRelay Outputs (16 points)
Screw Terminal Model (32 points)
Note: Only normal I/O delay time (19.2 ms typical) is available.
Link Terminals 443
Pro
gra
mm
able
C
on
tro
llers
B7A Interface Units for CQM1 PLCs
The following 16-point Terminals, 32-point Terminals, and PLC Connector models are available. Choose an appropriate model for your applicati-ons.
Note: Use B7A Interface Units and B7A Link Terminals that have the same transmission delay time settings. The transmission delay time (high-speed delay time of 3 ms typical or normal delay time of 19.2 ms typical) can be switched for B7A Interface Units and 32-point B7A screw terminal models with a section switch. Se the same transmission delay time for connected Units.
PLC Units (CQM1-B7A@@)
CQM1-B7A12 (16 inputs)
16-point Input (Transmission) Model
CQM1-B7A02 (16 outputs)
16-point Output (Reception) Model
CQM1-B7A21 (16 inputs and 16 outputs) 16-point Input (Transmission) Model
16-point Output (Reception) Model
CQM1-B7A13 (32 inputs) 16-point Input (Transmission) Model
16-point Input (Transmission) Model
CQM1-B7A03 (32 outputs)16-point Output (Reception) Model
16-point Output (Reception) Model
Screw Terminal Model (16 points)Modular Model (16 points) Hybrid IC Model (16 points) PLC Connector Model (16 points)
PLC Connector Model (32 points) Screw Terminal Model withRelay Outputs (16 points)
Screw Terminal Model (32 points)
Note: Only normal I/O delay time (19.2 ms typical) is available.
444 Programmable Controllers
B7A Interface Units for CS1 and C200H PLCs
The following 16-point Terminals, 32-point Terminals, and PLC Connector models are available. Choose an appropriate model for your applicati-ons.
Note: Use B7A Interface Units and B7A Link Terminals that have the same transmission delay time settings. The transmission delay time (high-speed delay time of 3 ms typical or normal delay time of 19.2 ms typical) can be switched for B7A Interface Units and 32-point B7A screw terminal models with a selection switch. Se the same transmission delay time for connected Units.
PLC Units (C200H-B7A@@)
16-point Input (Transmission) Model
16-point Output (Reception) Model
16-point Input (Transmission) Model
16-point Output (Reception) Model
16-point Input (Transmission) Model
16-point Input (Transmission) Model
16-point Output (Reception) Model
16-point Output (Reception) Model
16-point Input (Transmission) Models: 2 Units
16-point Output (Reception) Models: 2 Units
C200H-B7AI1(16 inputs)
C200H-B7AI2(32 inputs)
C200H-B7AO1(16 outputs) C200H-B7A02
(32 outputs)
C200H-B7A21(16 inputs, 16 outputs)
C200H-B7A22(32 inputs, 32 outputs)
Screw Terminal Model (16 points)Modular Model (16 points) Hybrid IC Model (16 points) PLC Connector Model (16 points)
PLC Connector Model (32 points) Screw Terminal Model withRelay Outputs (16 points)
Screw Terminal Model (32 points)
Note: Only normal I/O delay time (19.2 ms typical) is available.
Link Terminals 445
Pro
gra
mm
able
C
on
tro
llers
CQM1 PLCs
Using a CQM1 B7A Interface Unit
Note: Refer to “Units for CQM1/CQM1H PLCs” on page 454 for more details on the CQM1 B7A Interface Unit.
Using CQM1 I/O Units
Connecting B7A I/O to CQM1 PLCs
CQM1-B7A21
A0
B0
A1
B1
A2
B2
A3
B3
CQM1-B7A21
CQM1 Connecting Terminals
Connect to the SIG terminal of the B7A Output Link Terminal.
Connect to the negative power supply terminal of the B7A Output Link Terminal.
Connect to the SIG terminal of the B7A Input Link Terminal.
Connect to the negative power supply terminal of the B7A Input Link Terminal.
B7A/B7AS Output Unit (16 points)
Indicator or valve
B7A/B7AS Input Unit (16 points)
Limit switch, proximitysensor, or photoelectric sensor
Unused
CQM1-ID213 CQM1-OD213
B7A PLC connector model (32 points) Output Unit B7A-R3A13 B7A-R3A33 B7A-R3A18 B7A-R3A38
CQM1-ID213 Input Unit
B7A/B7AS Input Unit (16 points)
Limit switch, proximitysensor, or photoelectric sensor
B7A PLC connector model (32 points) Input Unit B7A-T3E3 B7A-T3E8
CQM1-OD213 Output Unit
B7A/B7AS Output Unit (16 points)
Indicator or valve
446 Programmable Controllers
CS1 and C200H PLCs
Using a C200H B7A Interface Unit
Note: Refer to “Units for CS1/C200H PLCs (Excluding the C200H-CPU01/02/03)” on page 454 for more details on the C200H B7A Interface Unit.
Using C200H I/O Units
Connecting B7A I/O to CS1, CJ1, and C200H PLCs
C200H-B7AI1 C200H-B7AO1
C200H-B7AI1 Input Unit
B7A/B7AS Input Unit (16 points)
Limit switch, proximity sensor, or photoelectric sensor
C200H-B7AO1 Output Unit
B7A/B7AS Output Unit (16 points)
Indicator or valve
C200H-ID215 C200H-OD215
B7A PLC connectormodel (16 points) Two Output Units B7A-R6A13 B7A-R6A33 B7A-R6A18 B7A-R6A38
C200H-ID215 Input Unit
B7A/B7AS Input Unit (16 points)
Limit switch, proximity sensor, or photoelectric sensor
B7A/B7AS Output Unit (16 points)
B7A PLC connector model (16 points) Two Input Units B7A-T6E3 B7A-T6E8
C200H-OD215 Output Unit
Note: The C200H-OD215 cannot be used in dynamic mode.
Indicator or valve
Link Terminals 447
Pro
gra
mm
able
C
on
tro
llers
Using a C200H Group-2 Multi-point I/O Unit (and a B7A PLC Connector Model Unit)
CH1
CH2
B7A PLC connector model (16 points) Input Unit B7A-T6E3 (CH1) B7A-T6E8 (CH1)
C200H-MD215, C200H-MD115, or CS1W-MD261 High-density I/O Unit
Note: The C200H-MD215 and C200H-MD115 cannot be used in dynamic mode.
Output Unit B7A-R6A13 (CH2) B7A-R6A33 (CH2) B7A-R6A18 (CH2) B7A-R6A38 (CH2)
B7A/B7AS Input Unit (16 points)
Limit switch, proximity sensor, or photoelectric sensor
B7A/B7ASOutput Unit (16 points)
Indicator or valve
C200H-MD215, C200H-MD115, or CS1W-MD261
B7A PLC connector model (32 points) Input Unit B7A-T3E3 B7A-T3E8
C200H-OD218,CS1W-OD231,or CJ1W-OD231Output Unit
B7A PLC connector model (32 points) Output Unit B7A-R3A13 B7A-R3A33 B7A-R3A18 B7A-R3A38
C200H-ID216,C200H-ID218,CS1W-ID231,or CJ1W-ID231Input Unit
B7A/B7AS Input Unit (16 points)
Limit switch, proximity sensor, or photoelectric sensor
B7A/B7AS Output Unit (16 points)
Indicator or valve
C200H-ID216, C200H-ID218, CS1W-ID231, or CJ1W-ID231
C200H-OD218, CS1W-OD231, or CJ1W-OD231
448 Programmable Controllers
B7A PLC connectormodel (32 points) Two Output Units B7A-R3A13 B7A-R3A33 B7A-R3A18 B7A-R3A38
B7A/B7AS Input Unit (16 points)
Limit switch, proximity sensor, or photoelectric sensor
B7A PLC connector model (32 points) Two Input Units B7A-T3E3 B7A-T3E8
B7A/B7AS Output Unit (16 points)
Indicator or valve
C200H-ID217,C200H-ID219,CS1W-ID261,or CJ1W-ID261Input Unit
C200H-ID217, C200H-ID219, CS1W-ID261, or CJ1W-ID261
C200H-OD219, CS1W-OD261, or CJ1W-OD261
C200H-OD219,CS1W-OD261,or CJ1W-OD261Output Unit
Link Terminals 449
Pro
gra
mm
able
C
on
tro
llers
Valve Units
Connecting B7A I/O to Valve Units
Output Unit B7A PLC Connector Unit
PC Valve UnitPCV213 (Nor-mal)
PCV214 (High-speed)
CQM1 -B7A02-B7A03
--- OK OK
-OD213 B7A-T3E3 OK ---B7A-T3E8 --- OK
C200H -B7AO1 --- OK ----B7A02 --- OK OK-OD215 B7A-T6E3 OK ---
B7A-T6E8 --- OK-MD215-MD115
B7A-T6E3 OK ---B7A-T6E8 --- OK
-OD218 B7A-T3E3 OK ---B7A-T3E8 --- OK
-OD219 B7A-T3E3 OK ---B7A-T3E8 --- OK
PC Valve Units
Output Unit
PCV201(8 points)
PCV213/214(8 points)
PCV201(8 points)
PCV213/214(8 points)
B7A PLC connector model(32 points) Input Unit B7A-T3E3 B7A-T3E8
Solenoid Valve Manifolds
Output Unit
16 points
B7A PLC connector model(32 points) Input Unit B7A-T3E3 B7A-T3E8
16 points
Solenoid Valve Manifolds(F10, F15, or F18)
Output Unit
B7A PLC connector model(32 points) Input Unit B7A-T3E3 B7A-T3E8
Output Unit B7A PLC Connec-tor Unit
Solenoid Valve ManifoldX80MS1-31(Normal)X88MS1-31(Normal)
X80MS1-32(High-speed)X88MS1-32 (High-speed)
F10, F15, or F18(Normal)
F10, F15, or F18 (High-speed)
CQM1 -B7A02-B7A03
--- OK OK OK OK
-OD213 B7A-T3E3 OK --- OK ---B7A-T3E8 --- OK --- OK
C200H -B7AO1 --- OK --- OK ----B7A02 --- OK OK OK OK-OD215 B7A-T6E3 OK --- OK ---
B7A-T6E8 --- OK --- OK-MD215-MD115
B7A-T6E3 OK --- OK ---B7A-T6E8 --- OK --- OK
-OD218 B7A-T3E3 OK --- OK ---B7A-T3E8 --- OK --- OK
-OD219 B7A-T3E3 OK --- OK ---B7A-T3E8 --- OK --- OK
450 Programmable Controllers
Available Models
32-point Models (Input/Transmission)
16-point Models (Input/Transmission)
Note: 1. The B7A-T6A@ 16-point models and B7A-T6B@ 16-point models have different terminal configurations.2. These are non-standard models and require a special order. Contact your OMRON representative for details on availability.
B7A Standard Models
Wiring Appearance Transmission delay time Input type Configuration of +/- terminals
Model number Standards
Screw terminals Can be set to normal (19.2 ms typ-ical) or high-speed (3 ms typical).
NPN compatible Alternating +/− B7AS-T3BS UL, CU, and CE
Wiring Appearance Transmission delay time Input type Configuration of +/- terminals
Model number Standards
Screw terminals Normal (19.2 ms typical) NPN compatible Only − B7A-T6A1(See note 1.)
UL, C, and CE
Alternating +/− B7A-T6B1(See note 1.)
PNP compatible Alternating +/− B7A-T6C1High-speed (3 ms typical) NPN compatible Only − B7A-T6A6
(See note 1.)Alternating +/− B7A-T6B6
(See note 1.)PNP compatible Alternating +/− B7A-T6C6
Normal (19.2 ms typical) NPN compatible Alternating +/− B7AS-T6B1 UL, CU, and CEHigh-speed (3 ms typical) B7AS-T6B6
Module Normal (19.2 ms typical) TTL inputs --- B7A-T6D2 UL and CHigh-speed (3 ms typical) B7A-T6D7
Compact module High-speed (3 ms typical) NPN inputs --- B7A-T6D7-D(See note 2.)
---
Hybrid IC Normal (19.2 ms typical) CMOS inputs --- B7AH-T6D3(See note 2.)
---
High-speed (3 ms typical) B7AH-T6D8(See note 2.)
Link Terminals 451
Pro
gra
mm
able
C
on
tro
llers
16-point Models (Output/Reception)
Note: 1. Hold: When an error has occurred, the outputs maintain the status that existed just before the error.Load OFF: When an error has occurred, the outputs are all reset to OFF (circuits open).
2. The error processing method (Hold or Load OFF) can be selected by connecting to the H or L terminal.3. N-channel MOSFET open drain output
4. P-channel MOSFET open drain output
5. These are non-standard models and require a special order. Contact your OMRON representative for details on availability.
16-point Relay Output Models: G70D-@-B7A (Output/Reception)
Note: These are non-standard models and require a special order. Contact your OMRON representative for details on availability.
Wiring Appearance Transmission de-lay time
Output type Output status after error*1
Configuration of +/- terminals
Model number Standards
Screw ter-minals
Normal(19.2 ms typical)
NPN open-collector, 100 mA/point
Hold Only + B7A-R6B11 UL, C, and CELoad OFF B7A-R6B31
NPN open-collector equiva-lent, 500 mA/point*3
Hold B7A-R6C11 CELoad OFF B7A-R6C31
PNP open-collector, 100 mA/point
Hold Only − B7A-R6F11 UL, C, and CELoad OFF B7A-R6F31
PNP open-collector equiva-lent, 500 mA/point*4
Hold B7A-R6G11*5 CELoad OFF B7A-R6G31*5
High-speed(3 ms typical)
NPN open-collector, 100 mA/point
Hold Only + B7A-R6B16 UL, C, and CELoad OFF B7A-R6B36
NPN open-collector equiva-lent, 500 mA/point*3
Hold B7A-R6C16 CELoad OFF B7A-R6C36
PNP open-collector, 100 mA/point
Hold Only − B7A-R6F16*5 UL, C, and CELoad OFF B7A-R6F36
PNP open-collector equiva-lent, 500 mA/point*4
Hold B7A-R6G16*5 CELoad OFF B7A-R6G36*5
Normal(19.2 ms typical)
NPN open-collector, 100 mA/point
Hold Alternately +/− B7AS-R6B11 UL, CU, and CELoad OFF B7AS-R6B31
High-speed(3 ms typical)
Hold B7AS-R6B16Load OFF B7AS-R6B36
Module Normal(19.2 ms typical)
NPN open-collector, 50 mA/point
Hold or Load OFF*2
--- B7A-R6A52 UL and C
High-speed(3 ms typical)
B7A-R6A57
Compact module
High-speed(3 ms typical)
NPN open-collector, 50 mA/point
Hold or Load OFF*2
--- B7A-R6A57-D*5 ---
Hybrid IC Normal(19.2 ms typical)
CMOS outputs, 2 mA/point Hold or Load OFF*2
--- B7AH-R6D53*5 ---
High-speed(3 ms typical)
B7AH-R6D58*5
Relay class Appearance Rated voltage Transmission delay time Output status af-ter error*1
Model number Standards
Relay outputs 24 V DC(16 SPST-NO outputs)
Normal(19.2 ms typical)
Hold G70D-R6R11-B7A ---Load OFF G70D-R6R31-B7A
Power MOSFET re-lay outputs
Hold G70D-R6M11-B7A(See note.)
Load OFF G70D-R6M31-B7A(See note.)
452 Programmable Controllers
16-point and 32-point PLC Connector Models (Input/Transmission)
8-point and 16-point Mixed I/O Models
Note: This is a non-standard model and requires a special order. Contact your OMRON representative for details on availability.
Link Terminals with Sensor Input Connectors (10 Points)
Note: These are non-standard models and require a special order. Contact your OMRON representative for details on availability.
I/O class Wiring Appearance Transmission delay time
Input type Model number Standards
Input(Transmission)
PLC connector model, 16 points
Normal (19.2 ms typical)
NPN compatible B7A-T6E3 UL, C, and CE
High-speed (3 ms typical)
B7A-T6E8
PLC connector model, 32 points
Standard product
Normal (19.2 ms typical)
NPN compatible B7A-T3E3
High-speed (3 ms typical)
B7A-T3E8
For Mitsubishi
Normal (19.2 ms typical)
NPN compatible B7A-T3E3-M ---
High-speed (3 ms typical)
B7A-T3E8-M
I/O class Wiring Appearance Transmission delay time
Output type Output status after error
Model number Standards
Output(Reception)
PLC connector model, 16 points
Normal(19.2 ms typical)
NPN open-collector, 50 mA/point
Hold B7A-R6A13 UL, C, and CELoad OFF B7A-R6A33
High-speed(3 ms typical)
Hold B7A-R6A18Load OFF B7A-R6A38
PLC connector model, 32 pointsStandard model
Normal(19.2 ms typical)
NPN open-collector, 50 mA/point
Hold B7A-R3A13Load OFF B7A-R3A33
High-speed(3 ms typical)
Hold B7A-R3A18Load OFF B7A-R3A38
Wiring Appearance Transmission delay time I/O type Output status after error
Model number Standards
Screw terminals(16 inputs and 16 outputs)
Can be set to normal (19.2 ms typical) or high-speed (3 ms typical).
Inputs:NPN compatibleOutputs:NPN open-collector, 100 mA/point
Can be set to “Hold” or “Load OFF.”
B7AM-6BS ---
Screw terminals(8 inputs and 8 out-puts)
Normal (19.2 ms typical) Inputs:NPN compatibleOutputs:NPN open-collector, 100 mA/point
Hold B7AM-8B11Load OFF B7AM-8B31
Inputs:PNP compatibleOutputs:PNP open-collector, 100 mA/point
B7AM/8F31(See note.)
High-speed (3 ms typical) Inputs:NPN compatibleOutputs:NPN open-collector, 100 mA/point
Hold B7AM-8B16Load OFF B7AM-8B36
Wiring Appearance Transmission delay time
Input type Contact arrange-ment
Model number Standards
M12 Sensor input con-nectors
Normal(19.2 ms typical)
NPN compatible Type A B7AC-T10A1(See note.)
UL, CU, and CE
Can be set to normal (19.2 ms typical) or high-speed (3 ms typi-cal).
B7AC-T10A1-A(See note.)
---
PNP compatible B7AC-T10A1-B(See note.)
Link Terminals 453
Pro
gra
mm
able
C
on
tro
llers
DeviceNet B7AC Interface Module (10 Points x 3)
Note: This is a non-standard model and requires a special order. Contact your OMRON representative for details on availability.
10-point Models (Input/Transmission)
Note: The B7A-T10S1 and B7A-T10S3 models have different terminal configurations.
10-point Models (Output/Reception)
Note: When an error has occurred, the 10-point model’s outputs maintain the status that existed just before the error.
B7AP Power Couplers
Note: There is a special cage attached to the B7AP-S1 that is adjustable for different setting distances between the Power Couplers.
Wiring Appearance Transmission delay time
Number of I/O points Number of ports Model number Standards
FA connectors Can be set to normal (19.2 ms typical) 31 ms max. or high-speed (3 ms typical) 5 ms max. with the Module’s DIP Switch.
10 points x 3 3 ports DRT1-B7AC(See note.)
UL, CU, and CE
Wiring Appearance Transmission delay time
Input type Configuration of +/- terminals
Model number Standards
Screw terminals Normal (19.2 ms typi-cal)
NPN compatible(Cannot be used with 2-wire sensor.)
Only − B7A-T10S1(See note.)
UL, C, and CE
Alternating +/− B7A-T10S3(See note.)
Module Normal (19.2 ms typi-cal)
TTL inputs --- B7A-T10M2 ---
Wiring Appearance Transmission de-lay time
Output type Output status af-ter error
Configuration of +/- terminals
Model number Standards
Screw ter-minals
Normal(19.2 ms typical)
NPN open-collector, 100 mA/point
Hold(See note.)
Only + B7A-R10SC01 UL, C, and CE
Module Normal(19.2 ms typical)
NPN open-collector, 50 mA/point
Hold(See note.)
--- B7A-R10MC ---
Unit Appearance Transmission distance (coupler)
Transmission delay time Model number Standards
Stationary Unit Normal(19.2 ms typical)31 ms max.
B7AP-S1 (See note.) UL and CU
Moving Unit B7AP-M1
M30
8±1.5 mm
M30
454 Programmable Controllers
Units for CJ-series PLCs
Units for CQM1/CQM1H PLCs
Units for CS1/C200H PLCs (Excluding the C200H-CPU01/02/03)
Note: 1. The transmission delay time can be set to normal (19.2 ms typical) or high-speed (3 ms typical).2. The error processing method can be set to “Hold” or “Load OFF.”3. Refer to the B7A Link Terminals catalog (Q101) for more details.4. Cannot beused with the C200H-CPU01/CPU02/CPU03/CPU11.
I/O class Wiring Transmission delay time Output status after error
I/O words required Model number Standards
Mixed I/O 32 inputs (16 inputs x 2 ports)32 outputs (16 outputs x 2 ports)
Normal (19.2 ms typical) or high-speed (3 ms typ-ical)
Hold (inputs only) 2 input words and 2 output words
CJ1W-B7A22 CE
Input 64 inputs (16 inputs x 4 ports)
Hold 4 input words CJ1W-B7A14
Output 64 outputs (16 outputs x 4 ports)
--- 4 output words CJ1W-B7A04
I/O class Wiring Transmission delay time Output status after error
I/O words required Model number Standards
Mixed I/O 16 inputs,16 outputs
Normal (19.2 ms typical) or high-speed (3 ms typ-ical)*1
Hold or Load OFF (inputs only)*2
1 input word and 1 output word(2 words total)
CQM1-B7A21 ---
Input 32 inputs(16 inputs x 2 ports)
Normal (19.2 ms typical) or high-speed (3 ms typ-ical)*1
Hold or Load OFF*2 2 input words CQM1-B7A13 UL and C
Input 16 inputs Normal (19.2 ms typical) or high-speed (3 ms typ-ical)*1
Hold or Load OFF*2 1 input word CQM1-B7A12 UL and C
Output 32 outputs(16 outputs x 2 ports)
Normal (19.2 ms typical) or high-speed (3 ms typ-ical)*1
--- 2 output words CQM1-B7A03 UL and C
Output 16 outputs Normal (19.2 ms typical) or high-speed (3 ms typ-ical)*1
--- 1 output word CQM1-B7A02 ---
I/O class Wiring Transmission delay time Output status after error
I/O words required Model number Standards
Mixed I/O 32 inputs(16 inputs x 2 ports)32 outputs(16 outputs x 2 ports)
Normal (19.2 ms typical) or high-speed (3 ms typ-ical)*1
Hold or Load OFF (inputs only)*2
2 input words and 2 output words(4 words total, Group-2)
C200H-B7A22 UL and C
Mixed I/O 16 inputs,16 outputs
Normal (19.2 ms typical) or high-speed (3 ms typ-ical)*1
Hold or Load OFF (inputs only)*2
1 input word and 1 output word(2 words total, Group-2)
C200H-B7A21
Input 32 inputs(16 inputs x 2 ports)
Normal (19.2 ms typical) or high-speed (3 ms typ-ical)*1
Hold or Load OFF (inputs only)*2
2 input words (Group-2)
C200H-B7A12
Input 16 inputs Normal (19.2 ms typical) Hold 1 input word(Basic I/O Unit)
C200H-B7AI1 UL, C, and CE
Output 32 outputs(16 outputs x 2 ports)
Normal (19.2 ms typical) or high-speed (3 ms typ-ical)*1
--- 2 output words (Group-2)
C200H-B7A02 UL and C
Output 16 outputs Normal (19.2 ms typical) --- 1 output word(Basic I/O Unit)
C200H-B7AO1 UL, C, and CE