automotive service association -...

Copyright 2011 Automotive Service Association. All rights reserved. All material published within these pages are the property of the Automotive Service Association and may not be reproduced for sale or distribution of any kind, nor may it be used in the creation of any other publications or online services without the express written consent of the Automotive Service Association.

Automotive Service Association®

Reference Chart of “Not-Included” Operations When Installing New Replacement Parts

Because the amount of labor time necessary for certain operations cannot be fully standardized, collision estimating databases do not have pre-existing labor estimates for some operations. As a result, when preparing estimates, users of computerized estimating programs will need to manually input certain operations. The lists contained in this document are designed to help users ensure they consider all of the possible operations when they write an estimate of collision damages.

The first section lists “Not-Included” operations in the published labor guides for common major parts, separated by information provider. Options: These are the vehicle’s option choices for the computer-assisted estimating program that may affect parts and/or labor on

an estimate. (If the correct option is selected, appropriate labor time will be included.) Operations: These are additional tasks that may be needed beyond the labor provided for parts replacement.

R&I Parts: These are parts not included in replacement labor, requiring additional labor when needed. Refinish: These are labor operations beyond the regular procedures for surface refinish, requiring additional labor when needed.

The second section lists general “Not-Included” operations, separated by steps in the repair process and applicable to all parts. When preparing an itemized estimate of damages, a quick check of these lists will help remind you to include all necessary operations and will result in a more complete and accurate damage analysis. Your final invoice must include all labor operations needed and performed.

This guide is meant as a quick summary of general “Not-Included” operations, for the benefit of ASA members. Refer to each information provider’s Procedures Pages for specifics.

Provided as a member benefit from the Automotive Service Association. 1901 Airport Freeway, Bedford, TX 76021-5732, Phone (800) 272-7467, www.asashop.org

Copyright 2011 Automotive Service Association. All rights reserved.

This guide is endorsed by the information providers below. For the latest information, visit the providers’ Web sites.

Audatex, a Solera Company (800) 366-4237 www.audatex.us

Audatex Reference Manual www.support.audatex.us Request for Review

www.audatex.us/contact_us/request/rfr_form.asp

CCC Information Services, Inc. (800) 621-8070 www.cccis.com

Mitchell International (800) 854-7030

www.mitchell.com CEG Procedure Pages www.mitchell.com/support

Search for “Procedure Pages” Submit an Issue

https://www.mitchell.com/support/ns/contact_phone.asp

Motor Information Systems (800) 288-6828 www.motor.com

Guide to Estimating Procedure Pages www.motor.com/page.asp?page_ID=176

Customer Service Contact www.motor.com/customer_service.asp


Labor Notes: Listed are general procedures for new part replacement operations. Specific vehicle information, labor notes, and part details may be found in each information provider's printed or electronic data.

• All labor/refinish times are based on new undamaged vehicles and parts. • Information in the procedure pages may be superceded by vehicle footnotes. • Mechanical parts or operations are indicated by (M). A Mechanical Labor Rate may be appropriate. • Some parts may not contain a labor or refinish amount; check if this is appropriate for that particular

repair and add as a judgment amount, if needed. Refinish Notes: Refinish operations that should be considered for every repair with every information provider are listed in the

second section with other general operations. Recoating, repriming or stripping of top coating on bumper covers may be required, and if so is not included with database refinish and replacement times. PPG, DuPont, BASF, AKZO and Sherwin-Williams suggest the following test to determine what type of primer has been applied.

Solvent test all factory original equipment (OE) and aftermarket primer coats for solubility with a plastic cleaning product or a strong solvent by wiping the substrate with a rag. If using a strong solvent such as lacquer thinner or an equivalent product, caution must be used to prevent the potential of static charge buildup. If the solvent softens or dissolves the primer coating during wiping, it is absolutely necessary to completely remove to factory primer and treat the bumper cover as an unprimed cover. We also suggest a tape test to verify the adhesion integrity of the primer.

Feather/Prime/Block – Collision Industry Conference, April 2006

• The repair process associated with damaged painted body panels typically involves multiple operations: body repair, feather, prime, block and refinish.

• The body repair process includes metal finishing and/or the use of body fillers to return the body panel to its undamaged contour. The repaired area is finished to 150-grit and free of surface imperfections.

• Feather, prime and block are not-included refinish operations that complete the process from 150-grit to the condition of a new undamaged panel and are outlined and documented in printed and/or electronic time guides.

• The body/paint labor and materials necessary to prepare the repaired area from 150-grit to the condition of a new undamaged part are valid and required steps in the process. The labor and material allowance for these operations requires an on-the-spot evaluation of the specific vehicle and damage.

Blending – Suggested/Automated Calculations

Blending formulas are for use on an UNDAMAGED panel for the sole purpose of facilitating color match. The formulas assume adjacent panels also are being refinished. They are not intended for use on repaired panels.


Bumper

Audatex CCC/MOTOR Mitchell Options: Impact Strips Options: Clear Coat Options: Bumper Guards Front Spoiler Three Stage Impact Strips Fog Lamps Fog Lamps Xenon Headlamps Clear Coat Cornering Lamps Three Stage Parking Sensors Frt/Rear Obstacle Warning System Headlamp Washers Two or Three Stage Exterior Two or Three Stage Interior Operations: Drill Labor Operations: Drill/Cut Labor Operations: Drill Labor Aim Headlamps Lamp Aiming Aim Lamps Aim Fog Lamps R&I Parts: Front License Bracket R&I Parts: Energy Absorber (if mtd. to frame rail) R&I Parts: Impact Absorbers Front License Plate Valance Panel (if not mounted to bumper) Mounting Arms Ornaments License Bracket Overhaul/Replace Headlamp Parts Emblems/Nameplates Battery Headlamp Washers Non-Standard Equipment Air Bag Sensor Park Aid Sensors Wheels Distance Sensor Exterior Trim (adhesive) Fender Liners Lamps (optional equip) Optional Accessories Lamps (not mounted in bumper) Auxiliary/Fog Lamps Aftermarket and OEM Equipment Brush Guard Wheels Spoilers Fender Liners Non-Standard Equipment Wheels Fender Liners Refinish: Two Tone Refinish: Two Tone Refinish: Two Tone Mask Mouldings Prep Unprimed Raw Bumper Prep Unprimed Raw Bumper Prep Unprimed Raw Bumper


Headlamp Mounting Panel

Audatex CCC/MOTOR Mitchell Options: Two or Three Stage Exterior Options: Clear Coat Options: Clear Coat Two or Three Stage Interior Three Stage Three Stage Xenon Headlamps Operations: Drill Labor Operations: Drill Labor Operations: Drill Labor Aim Headlamps Lamp Aiming Aim Lamps R&I Parts: Mouldings/Emblems R&I Parts: Bumper Assembly R&I Parts: Overhaul/Replace Headlamp Parts Nameplates/Ornaments Aftermarket and OEM Equipment Front Bumper Non-Standard Equipment Fenders/Liner Exterior Trim (adhesive) Non-Standard Equipment Refinish: Mask/R&I Mouldings Refinish: Mask/R&I Mouldings Refinish: Mask/R&I Mouldings Two Tone Edging Refinish Two Tone Refinish Back Side Edging Clear Coat Refinish Back Side Refinish Back Side Two Tone


Hood

Audatex CCC/MOTOR Mitchell Options: Two or Three Stage Exterior Options: Clear Coat Options: Clear Coat Two or Three Stage Interior Three Stage Three Stage Hood Scoop Operations: Drill Labor Operations: Drill Labor Operations: Drill Labor Move/Protect Wiring Seam Sealing Repair/Align Hinges Seam Sealing Repair/Align Hinges Seam Sealing Repair/Align Hinges R&I Parts: Insulator Pad R&I Parts: Aftermarket Equipment R&I Parts: Hinges Hinge from Vehicle Emblems/Nameplates Gas Prop Rod Mouldings/Emblems Hinge Insulator (adhesive) Nameplates/Ornaments Hood Lock Exterior Trim (adhesive) Non-Standard Equipment Mouldings/Ornamentation Non-Standard Equipment Wiring Prop Rods Cowl Screen Refinish: Interior Masking/Protection Refinish: Interior Masking/Protection Refinish: Interior Masking/Protection Two Tone Underside Refinish Two Tone Chip Guard Underside Clear Coat Corrosion Protection Corrosion Protection Two Tone Chip Guard Corrosion Protection Chip Guard


Radiator Support Audatex CCC/MOTOR Mitchell Options: Air Conditioning Options: Air Conditioning Options: Air Conditioning Automatic Transmission Transmission Automatic Transmission Oil Cooler Clear Coat Oil Cooler Two or Three Stage Interior Heavy Duty Cooling Skid Plate Clear Coat Operations: Aim Headlamps Operations: Lamp Aiming Operations: Aim Lamps Refrigerant Recovery (M) Refrigerant Recovery (M) Refrigerant Recovery (M) Refrigerant Recharge (M) Refrigerant Recharge (M) Evacuate & Recharge (M) Power Steering Lines (M) Protect Open Hoses/Lines (M) Battery D&R Protect Open Hoses/Lines (M) Undercoating/Tar/Grease Removal Move/Protect Wiring Tar/Grease/Coatings Removal Repair/Prepare Body Flanges Protect Open Hoses/Lines (M) Repair/Prepare Body Flanges Battery D&R/Recharge Tar/Grease/Coatings Removal Install Battery Backup, Reset Electronics Reset Electronics Repair/Prepare Body Flanges Protect SRS system Protect SRS System Protect SRS System R&I Parts: Fuel Vapor Canister R&I Parts: Brackets/Braces Transfer R&I Parts: Front Bumper Wiring Harness Fenders Hood Panel Fuse Box Emission Components (M) Header Panel Relay Aftermarket Equipment Fenders/Liners Non-Standard Equipment Any Items Not Listed in Footnote Radiator Hoses Wheels Wheels Fan/Pulleys/Belts Air Conditioning Parts (M) Bolted Parts Oil Coolers (engine, trans, P/strg) Fluid Reservoirs Vapor Canister (M) Suspension Assemblies (M) Wiring/Wiring Harness SRS Sensor Refinish: Interior Masking/Protection Refinish: Masking/Protection Refinish: Interior Masking/Protection Refinish Welding Damage Refinish Welding Damage Refinish Welding Damage Feather, Prime & Block Feather, Prime & Block Feather, Prime & Block Refinish Upper Rails, Lower Rails, Aprons Refinish Upper Rails, Lower Rails, Aprons Refinish Upper Rails, Lower Rails, Aprons Two Tone/Blackout Two Tone/Blackout Two Tone/Blackout Corrosion Protection Corrosion Protection Corrosion Protection


Fender Audatex CCC/MOTOR Mitchell Options: Power Antenna Options: Clear Coat Options: Power Antenna Front Mud Guards Three Stage Clear Coat Two or Three Stage Exterior Three Stage Two or Three Stage Interior Operations: Drill Labor Operations: Drill Labor Operations: Drill Labor Cut/Fill Holes Cut/Fill Holes Cut/Fill Holes Aim Headlamps Lamp Aiming Aim Lamps Seam Sealing R&I Parts: Antenna R&I Parts: Antenna R&I Parts: Front Bumper Mouldings Front Bumper Header Panel Emblems Battery Skirt/Liner Nameplates Emblems/Nameplates Wheel Non-Standard Equipment Grille Antenna Cowl Screen Header Panel Rocker Moulding Wheels Hood Exterior Trim (adhesive) Running Board Inner Panels/Wheelhouse Non-Standard Equipment Mirror Cowl Screen Mouldings/Ornamentation Running Board Mud Guard Hood Road Wheel Spoilers/Flares/Retainers Cowl Screen Wheels Running Board/Rocker Moulding Refinish: Mask/R&I Mouldings Refinish: Mask/R&I Mouldings Refinish: Mask/R&I Mouldings Chip Guard Edging Refinish Gravel Guard Two Tone Edging Clear Coat Two Tone Inner Fender Stone Chip Guard Inner Fender Corrosion Protection Two Tone Interior Masking/Protection Corrosion Protection Corrosion Protection


Door Shell

Audatex CCC/MOTOR Mitchell Options: Power Locks Options: Power Locks Options: Power Locks Power Windows Power Windows Power Windows Keyless Entry Clear Coat Remote Mirror Mirrors Three Stage Clear Coat Two or Three Stage Exterior Three Stage Two or Three Stage Interior Operations: Drill Labor Operations: Drill Labor Operations: Drill Labor Code Lock Cylinder Lock Cylinder Recoding Code Lock Cylinder VIN Label Broken Glass Cleanup Sound Deadening Broken Glass Cleanup Remove Bonded Glass Broken Glass Cleanup Disable/Enable SRS System (from damaged door shell) Reinitialize Auto Up/Down Function Reinitialize Auto Up/Down Function Reinitialize Auto Up/Down Function R&I Parts: Door Striker R&I Parts: Emblems/Nameplates R&I Parts: Channels Attached to Glass Shoulder Harness Hinge Halves Bolted to Pillar Mirror Sound Deadener Hinge (welded type) Hinges Door-Mounted Speakers Mirror Hinge Anchor Plates Mouldings/Emblems Mouldings/Ornamentation Exterior Trim (adhesive) Nameplates/Ornaments Passive Restraint System (air bags) Stripes/Decals/Overlays Non-Standard Equipment Back Glass Wiper/Washer Non-Standard Equipment Transfer Hinges Spare Tire Carrier Fuse Fuse Sound Deadening Mat Sound Deadening Mat Refinish: Mask/R&I Mouldings Refinish: Mask/R&I Mouldings Refinish: Mask/R&I Mouldings Interior Masking/Protection Cover Mask Interior Interior Masking/Protection Outside Handle/Mirror Outside Handle/Mirror Outside Handle/Mirror Chip Guard Stone Chip Guard Gravel Guard Two Tone Two Tone Two Tone Moulding Corrosion Protection Corrosion Protection Corrosion Protection


Door Panel

Audatex CCC/MOTOR Mitchell Options: Power Locks Options: Power Locks Options: Power Locks Power Windows Power Windows Power Windows Keyless Entry Clear Coat Remote Mirror Mirrors Three Stage Clear Coat Two or Three Stage Exterior Three Stage Two or Three Stage Interior Operations: Drill Labor Operations: Straighten Door Frame Operations: Drill Labor Door Shell Repair Broken Glass Cleanup Door Shell Repair Application of Adhesive/Foams Code Lock Cylinder Sound Deadening Sound Deadener Undercoating/Tar/Grease Removal Code Lock Cylinder Code Lock Cylinder Drill, Modify, Fabricate Mounting Holes Broken Glass Cleanup Protect for Weld Damage Fabricate Reinf. Inserts, Sleeves, Flanges Protect for Weld Damage Broken Glass Cleanup Fill, Plug, Finish Unneeded Holes Tar/Grease/Coatings Removal Tar/Grease/Coatings Removal Panel Bonding Adhesive Repair/Prepare Body Flanges Repair/Prepare Body Flanges Reinitialize Auto Up/Down Function Panel Bonding Adhesive Disable/Enable SRS Anti Flutter Foam Reinitialize Auto Up/Down Function Reinitialize Auto Up/Down Function Anti Flutter Foam R&I Parts: Power Door Lock R&I Parts: Glass R&I Parts: Glass Shoulder Harness Hinge Glass Channels Door-Mounted Speakers Mirror Glass Hardware Mouldings/Emblems Mouldings/Ornamentation Mirror Nameplates/Ornaments Passive Restraint System (Air Bags) Exterior Trim (adhesive) Non-Standard Equipment Regulator Non-Standard Equipment Hinges Reinforcement Bar Regulator/Latch/Door Check Regulator Emblems/Nameplates Run Channel Latch Back Glass Wiper/Washer Appliqué Check Strap, Run Channel Vapor Barrier/Latch/Door Scalp Moulding Appliqué Appliqué Scalp Moulding Scalp Moulding Refinish: Mask/R&I Mouldings Refinish: Mask/R&I Mouldings Refinish: Mask/R&I Mouldings Interior Masking/Protection Interior Masking/Protection Interior Masking/Protection Outside Handle/Mirror Jambs/Interior Refinish Outside Handle/Mirror Chip Guard Jambs/Interior Clear Coat Gravel Guard Two Tone Outside Handle/Mirror Two Tone Moulding Stone Chip Guard Corrosion Protection Door Shell Two Tone Corrosion Protection Corrosion Protection


Quarter Panel Audatex CCC/MOTOR Mitchell Options: Rear Antenna Options: Clear Coat Options: Clear Coat Ground Effects Three Stage Three Stage Two or Three Stage Exterior Two or Three Stage Interior Blind Spot Detection System Operations: Drill/Fill Labor Operations: Sound Insulation Operations: Drill/Fill Labor Move/Protect Wiring Foam Move/Protect Wiring Broken Glass Cleanup Broken Glass Cleanup Sound Deadening Repair Gutters Fabricate Reinf. Inserts, Sleeves, Flanges Broken Glass Cleanup Tar/Grease/Coatings Removal Drill, Modify, Fabricate Mounting Holes Cut Holes Repair/Prepare Body Flanges Undercoating/Tar/Grease Removal Tar/Grease/Coatings Removal Protect SRS Fill, Plug, Finish Unneeded Holes Repair/Prepare Body Flanges Protect SRS Protect SRS R&I Parts: Body Weatherstrip (pullback) R&I Parts: Antenna R&I Parts: Headliner (preformed) Roll Down Quarter Glass Aftermarket Equipment Fuel Tank Headliner Lamps/Spoilers/Flares (opt. equip) Urethane-set Glass (undamaged) Fuel Tank Fuel Tank Inner Panels Sunroof Drains Glass Regulator Assembly Wheel Antenna Headliner/Roof Cover Antenna Mouldings/Emblems Trunk Lid/Tailgate/Lift Gate/Rear Door Wiring/Wiring Harness Nameplates/Ornaments Mud Guard Glass Channels Non-Standard Equipment Road Wheel Exterior Trim (adhesive) Van Interior Trim/Rear Seat Panels Inward of Quarter Non-Standard Equipment Inner Quarter Panel Carpet and Insulation Blind Spot Detection System Wiring Harness Mouldings/Ornamentation Exhaust Emblems/Nameplates Exhaust Blind Spot Detection System Refinish: Refinish Welding Damage Refinish: Refinish Welding Damage Refinish: Refinish Welding Damage Feather, Prime & Block Feather, Prime & Block Feather, Prime & Block Mask/R&I Mouldings Refinish Exposed Interior Mask/R&I Mouldings Interior Masking/Protection Mask/R&I Mouldings Interior Masking/Protection Chip Guard Interior Masking/Protection Gravel Guard Two Tone Pillar/Edging Refinish Two Tone Rocker Panel, Inner and/or Outer Stone Chip Guard, Two Tone Rocker Panel, Inner and/or Outer Aperture, Rear Body Panel Rocker Panel, Inner and/or Outer Aperture Package Tray, Gutters, Corrosion Protection Rear Body Panel Package Tray, Gutters, Inside of Panel Refinish Inside of Panel Aperture, Rear Body Panel Corrosion Protection Package Tray, Gutters, Inside of Panel, Corrosion Protection


Deck Lid/Lift Gate

Audatex CCC/MOTOR Mitchell Options: Rear Spoiler Options: Clear Coat Options: Clear Coat Rear Wiper Three Stage Three Stage Heated Tailgate Glass Two or Three Stage Exterior Two or Three Stage Interior Rear Camera Operations: Drill Labor Operations: Drill Labor Operations: Drill Labor Code Lock Cylinder Lock Cylinder Recoding Code Lock Cylinder Broken Glass Cleanup Broken Glass Cleanup Broken Glass Cleanup Seam Sealing Remove Glass from Damaged Lift Gate Fill, Plug, Finish Unneeded Holes OEM Caulk/Seam Sealer R&I Parts: Hinge from Vehicle R&I Parts: Emblems/Nameplates R&I Parts: Hinges Mouldings/Emblems Hinges Hinge Anchor Plates Nameplates/Ornaments Aftermarket Equipment Gas Prop Rod Non-Standard Equipment Mouldings/Ornamentation Luggage Rack Wiring Spoilers/Flares/Louvers/Retainers Spoiler Sound Deadener Wiper/Washer - Back Glass Exterior Trim (adhesive) Electrical Wiring Urethane-set Glass (undamaged) Camera Wiper/Washer Spare Tire Carrier Non-Standard Equipment Special Interior Trim Refinish: Mask/R&I Mouldings Refinish: Mask/R&I Mouldings Refinish: Mask/R&I Mouldings Interior Masking/Protection Interior Masking/Protection Interior Masking/Protection Two Tone Underside Refinish Two Tone Corrosion Protection Underside Clear Coat Corrosion Protection License Plate Pocket Two Tone License Plate Pocket Door Handle Corrosion Protection Door Handle License Plate Pocket Door Handle


Rear Body Panel Audatex CCC/MOTOR Mitchell Options: Two or Three Stage Exterior Options: Clear Coat Options: Clear Coat Two or Three Stage Interior Three Stage Three Stage Operations: Drill Labor Operations: Code Lock Cylinder Operations: Drill Labor Code Lock Cylinder Transfer Brackets/Braces Code Lock Cylinder Tar/Grease/Coatings Removal Electrical Wiring Cut Holes Repair/Prepare Body Flanges Undercoating/Tar/Grease Removal Tar/Grease/Coatings Removal Protect SRS Drill, Modify, Fabricate Mounting Holes Repair/Prepare Body Flanges Fill, Plug, Finish Unneeded Holes R&I Parts: Power Lock Actuator R&I Parts: Fuel Tank R&I Parts: Fuel Tank Fuel Tank Emblems/Nameplates Wiring/Wiring Harness Exhaust System Parts (M) Energy Absorber Exterior Trim (adhesive) Body Weatherstrip Exhaust System (M) Non-Standard Equipment Body Insulation Aftermarket Equipment Spare Tire/Jack Assy. Wiring Mouldings/Ornamentation Vapor Canister and/or Lines Mouldings/Emblems Valance Panel Nameplates/Ornaments Spare Tire/Jack Assy. Non-Standard Equipment Vapor Canister and/or Lines Spare Tire, Tool Kit Keyless Entry Receiver Vapor Canister and/or Lines Refinish: Refinish Welding Damage Refinish: Refinish Welding Damage Refinish: Refinish Welding Damage Feather, Prime & Block Feather, Prime & Block Feather, Prime & Block Mask/R&I Mouldings Mask/R&I Mouldings Mask/R&I Mouldings Interior Masking/Protection Interior Masking/Protection Interior Masking/Protection Two Tone Interior Refinish Two Tone Stone Guard Interior Clear Coat Stone Guard Trunk Floor, Lower Frame Rails Two Tone Trunk Floor, Lower Frame Rails Inner and/or Outer Quarter Panels Stone Guard Inner and/or Outer Quarter Panels Gutters Trunk Floor, Lower Frame Rails Gutters Corrosion Protection Inner and/or Outer Quarter Panels Tail Lamp Pockets Tail Lamp Pockets Gutters, Tail Lamp Pockets


Full Frame

Audatex CCC/MOTOR Mitchell Options: Air Conditioning Options: Air Conditioning Options: Air Conditioning Automatic Transmission Transmission Automatic Transmission Oil Cooler 4x4 Oil Cooler 4x4 Trailer Brakes Power Steering Trailer Brakes Four Wheel Drive Anti-Lock Brakes Trailer Brakes Operations: Aim Headlamps Operations: Lamp Aiming Operations: Aim Lamps Refrigerant Recovery (M) Brakes Adjust and Bleed (M) Refrigerant Recovery (M) Refrigerant Recharge (M) Pulling or Straightening Labor Refrigerant Recharge (M) Bleed Brakes (M) Suspension/Wheel Alignment (M) Overhaul Transferred Assemblies Protect Open Hoses/Lines (M) Protect Open Hoses/Lines (M) Wheel Alignment (M) Drain and Replace Oils and Fluids Fluids (top off) Adjust Control Linkage Wheel Alignment (M) Shift and Throttle Linkage Adjust Bleed Brakes (M) Adjust Linkage Parking Brake Adjust Pull Back Carpeting Test Drive Transfer Fuel (hold tank if necessary) Corrosion Protection Carpet Roll-back Corrosion Protection Bleed Diesel Fuel System Corrosion Protection Bleed Diesel Fuel System Cut & Dispose of Old Frame Measure LKQ Frame Cut & Dispose of Old Frame Bleed Diesel Fuel System Cut & Dispose of Old Frame R&I Parts: Interior Trim Panels R&I Parts: Interior Trim/Carpet R&I Parts: Welded or Riveted Frame Parts Interior Bolted Parts Exhaust Systems (M) Seats Wiring Harness Steering Gear Individual Components Interior Trim Non-Standard Equipment Special Equipment Transfer Optional Accessories Running Boards Wheels Auxiliary Lamps Welded, Riveted X-Members Trailer Hitch Fuel Tank (optional) Trailer Hitch Seats Brush Guard Power Steering Cooler Trailer Hitch Transmission Cooler Trailer Connector Heat Shields Brackets (weld-on) Auxiliary Fuel Tank Running Boards Welded, Riveted X-Members


General “Not-Included” Operations

Repair Preparation Disassembly Re-assembly Repair Completion

Set Up and Measure Remove Accessory Items Test/Fit Parts Restore Corrosion Protection

Rough/Access Pull Corroded/Frozen Parts Labor Fit Non-OEM Parts Undercoating

Diagnostic Labor Collision Access Labor Modify Replacement Parts Repair Pinch Clamp Damage

Record Electronic Settings Adhesive Removal Addl. Prep Non-OEM Parts Stripes

Protect Electronic Parts Disable Air Bag Systems Repair/Prepare Body Flanges Check/Fill Fluids

Inspect/Test Seat Belts Disconnect/Reconnect Battery Adjacent Parts Alignment Apply Lubricant/Similar Material

Refrigerant Recovery Remove Undercoating Clean Up Used Parts Recharge Battery

R&I Audio Equipment Remove Protective Coatings Trim Used Parts Clear System Codes

R&I Bed Protectors Remove Stripes/Decals Transfer Parts to/from Salvage Enable Hybrid Components

Remove Labels Remove Moulding Adhesive Fabricate Sleeves Reset Electronic Components

Steam Clean Engine Compart. Drain and Store Fuel Transfer Braces/Brackets Resync. Electronic Components

Disarm Air Bags Wiring Relocate and Protect Apply Weld-Through Primer Reprogram Electronic Components

Disable Hybrid Components Disassemble Salvage Part Sound Deadening Restoration Computer Relearn

Protect from Welding Damage Remove Wheel/Cover Locks Drill Labor Glass Cleanup

Prep to Install Clamps Protect Seats/Interior Trim Caulking/Seam Sealing/Foam Clean Interior

Adhesive Removal Protect Open Hoses/Lines Mount Tire/Balance Wheel Clean for Delivery

Clean Vehicle for Repairs Repair Welding Damage Detail for Delivery

Storage Fees Clean/Retape Mouldings/Emblems Road Test Vehicle

Tear Down Fees Wiring Repairs/Rerouting Hazardous Waste Disposal

Towing Fees Recode Lock Cylinder Solid Waste Disposal

Estimate Processing Test/Enable Air Bag Systems Battery Disposal

Total Loss Processing Refill Fuel Tank Tire Disposal

Neutralize Battery Acid Pressure Test Cooling System Rezero Steering Angle Sensor

Purge/Bleed Cooling System Rezero Pass. Seat Weight Sensor

Purge/Bleed Power Steering System

R&I TPS, Reset TPS System


General “Not-Included” Operations (continued)

Refinish Refinish Common R&I Parts Materials Double Sided Tape, Butyl Tape

R&I Parts for Refinishing Add’l Spray Out Test Panels Front License Bracket Anti-Corrosion Materials

Repair Adj. Panel Weld Damage Add’l Tint for Color Match Antenna Plastic Repair Kit/Materials

Pre-Existing Surface Problems Add’l Tint for Underside Match Mud Guards Body Repair Materials

Spot Putty Color Blend Adjacent Panels Mouldings (if optional) Welding Materials

Epoxy Priming Multicolor/Gloss/Texture Ornamentation (if optional) Panel Bonding Adhesive

Chip Guard Removal Retexturing Emblems (if optional) Flex Additive

Wash Vehicle Prior to Painting Luggage Compartment Coating Mirrors Refinishing Prep Materials

Removal of Mold Release Agent De-Nib and Finesse Spoilers/Flares Special Paint Materials

Prime Raw Plastic Parts Finish Sand and Buff Ground Effects Glass Installation Kit

Chip Guard Application Apply Protective Coatings Audio Equipment Rivets

Feather, Prime and Block Fuel Surcharge Luggage Rack Hardware, One-Time Fasteners

Mask Attaching Parts Cavity Wax Accessory Items Light Bulbs

Mask Decals/VIN Plates Cover Car for Priming Seat Belt Components Alignment Shims

Mask Beyond 36” Perimeter Cover Car for Jambing/Cut-in Spare Tire A/C O-Rings

Mask for Primer Brake Lines Refrigerant, Refrigerant Oil

Mask Vehicle Interior Fuel Lines Pinstripes

Mask Door Jambs Wheels Engine Coolant

Mask Engine Compartment Brake Fluid

Cover Car - Exterior Engine Compartment Fluids

Rebag Vehicle Lubricants

Seam Sealer Materials

Retexturing Materials

Foam

Applicator Tips

Drill Bits

automotive service association -...

Documents