available short-cycle systems

© 2012 - 2018 PIRATE BRAND. ALL RIGHTS RESERVED.

Unfortunately, when blasting frequently for less than 10 minutes at a time, abrasive can overfill the blaster, damaging the pop-up and causing it not to seal properly. This causes abrasive to “burp” from around the pop-up and eventually ruin the metering valve. Pirate Brand® Short-Cycle™ blasters overcome this issue by remaining pressurized when the control handle is released and feature a remote blow-down button to allow you to depressurize/refill your blaster without leaving the blast room.

Short-Cycle™ Blasters are designed to withstand the punishing effects of quick on-off blasting while retaining the convenience of a pressure release system. Standard pressure release (SPR) blasters are great for blast room use because when paired with an overhead abrasive hopper, they can be refilled by simply releasing the control handle and allowing the blaster to depressurize and automatically fill.

AVOID DAMAGE

LIKE THIS CAUSED BY SHORT

BLAST CYCLES

System SaverShort-Cycle

TM

Rev. Mar. 2018© 2012 - 2018 PIRATE BRAND. ALL RIGHTS RESERVED.

AVAILABLE SHORT-CYCLETM SYSTEMS

888-0431-33954-E Pneumatic Controls

888-1431-33954-E Pneumatic Controls w/ Abrasive

Cut-Off on Hose


Cut-Off Remote Mounted

888-0432-33954-E Electric Controls

888-4432-33964-EElectric Controls w/ Abrasive

Cut-Off on Cord

888-5432-33964-E Electric Controls w/ Abrasive


1 Outlet 10 Cu. Ft. Blasters

888-0731-33954-E Pneumatic Controls

888-1731-33954-E Pneumatic Controls w/

Abrasive Cut-Off on Hose

888-3731-339654-EPneumatic Controls w/ Abrasive


888-0732-33964-EElectric Controls


Cut-Off on Cord



2 Outlet 10 Cu. Ft. Blasters

888-0741-33950-EPneumatic Controls


Cut-Off on Hose

888-3741-33950-EPneumatic Controls w/ Abrasive


888-0742-33960-EElectric Controls


Cut-Off on Cord



All Short-CycleTM Systems come Standard with the BIG GUNTM Full Flow System for higher productivity.

1 Outlet 6.5 Cu. Ft. Blasters

available short-cycle systems

Documents