avaya ip office - lab23 - configuring embedded file system
DESCRIPTION
Re-Setup SD card errorTRANSCRIPT
-
Lab23 - Configuring Embedded File System
Take a back up of the current IP office and testing configuration backup files works
Select Save Configuration as
-
Enter a name for the backup configuration file
-
System failed to load config as it has been erased
Select File - Offline - Open file
-
password=password
-
Keep an eye on any digital sets that are plug in - Once set initializes the system is ready!
-
Check IP address and version - Ensure its correct
Enter password=Administrator
Check that all data configurations are back
-
Memory SD card - Shutdown
-
Take a look at the rear of IP Office Control unit - SD LED indication should be OFF
Remove SD card
-
To re-create SD crad
Using a SD card reader - Insert A-Law SD card(Please ALERT Instructor before doing this)
Select the following:
-
After about 1 minute and 30 sec, this screen appears
-
DO NOT REMOVE SD CRAD AT THIS TIME, PLEASE SEE PROGRESS
INDICATOR
-
Select OK - System SD card successfully rcreated
-
Formatting SD Card - This will erase the SD card COMPLETLY
Backup All recorded announcements from Embedded File System - DYNAMIC-
LVMAIL - AAG
-
The screen does show any updates - Please wait.....................................
The SD card is completely ERASED
-
Wait for this screen to appear approx = 40 sec
-
Wait for SD card to complete - See progress Indicator
-
Select OK
Check SD card from my computer
-
Insert SD card to rear of Control unit
-
Check the rear of control unit that SD LED is ON
-
Restore all recordings and reboot IP Office
-
Test announcements from AA
-
Performing a system reboot
-
Lookout on any connected Digital stations - It will be disconnected
Once DS initializes IP office is ready to be login again