ax3sq with 3sqabv trim - usesi · 2018. 6. 3. · printed in u.s.a. ©2017 acuity brands lighting,...

1300 S. Wolf Road • Des Plaines, IL 60018 • Phone (847) 827-9880 • Fax (847) 827-2925 • Visit us at www.acuitybrands.com/aculuxPrinted in U.S.A. ©2017 Acuity Brands Lighting, Inc. Rev. 03/01/17 1 of 4

Luminaire Type:Catalog Number (autopopulated):

P5.12.10

3” LED UNIVERSAL RECESSED ADJUSTABLE/DOWNLIGHT/WALL WASH

800/1200/1500/2000 LUMENSQUARE ADJUSTABLE BEVEL

NEW CONSTRUCTIONAX3SQ with 3SQABV Trim

Example: AX3SQ A 20LM 30K 80CRI 24D FPC 120 ICAT 3SQABV BS WHSF

Series / Housing Style Lumens CCT CRI Beam Driver Voltage1 OptionsAX3SQ A New Construction Universal

ADJ/DL/WW08LM 800 Lumens 27K 2700K 80CRI 12D 12° beam EZ1 eldoLED 0-10V, 1%dim 120 CP Chicago Plenum12LM 1200 Lumens 30K 3000K 90CRI 24D 24° beam EZB eldoLED 0-10V, <1% dim 277 ICAT IC, Air-Tight

AX3SQ LPA Low Profile Universal ADJ/DL/WW

15LM 1500 Lumens 35K 3500K 35D 35° beam FPC Phase cut dimming, 5% dim MVOLT (120-277)

NLIGHT2 nLight dimming pack controls20LM 2000 Lumens 40K 4000K 50D 50° beam ECOS2 Lutron Hi-Lume A series 2-wire

forward phase, 1% dimECOS3 Lutron Hi-Lume A series 3-wire with

EcoSystem, 1% dimDMXR DMX,RDM Driver, 1% dimDALI DALI Driver, 1% dim

Square Trim Style Reflector Finish Flange Style / Finish EnvironmnetADJUSTABLE ACCENT BS Black Specular SELF FLANGED WET Wet location

(Solite Lens)3SQABV Bevel WHSF White painted Trim

BLSF Black painted Trim

FLANGELESS 4

WHFM Flangeless, White trim

BLFM Flangeless, Black trim

TRIM O

PTION

SN

OTES

Ordering Notes

ORDERING INFORMATION

A+ Capable options indicated by this color background .

ACULUX LUMINAIRE

PRODUCT SPECIFICATIONSLED Light Engine Consistent fixture to fixture color within 3-step MacAdam ellipse • 2700K, 3000K, 3500K, or 4000K color temperatures are available with 80 CRI minimum • 2700K and 3000K also available with 90 CRI minimum.Modular Optics 45° cutoff to source and source image • Available with 12° Spot, 24° Narrow Flood, 35° Flood and 50° wide flood field interchangeable optics • Additional distributions of 20°, 30°, 40°, 45° and 60° FWHM can be achieved with the use of the diffusing films and spot primary optic • Patented (US Patent 8,950,911) auto-adjusting optic holder maximizes luminaire efficiency by maintaining optimal LED optic position • Accommodates up to three (3) additional beam control lenses and/or filters.Adjustability Acu-Aim™ precision geared hot-aiming achieves 370° rotation, 45° tilt • Optimized center beam optics translates light engine forward as it is aimed off nadir, ensuring maximum light and low brightness • Black aiming mechanism preserves dark aperture.Reflector .040” aluminum angle-cut refelctor in black specular Alzak finish shields housing interior.Trims Style Self Flanged and Flangeless reflectors utilize precision wound double torsion springs for tight, secure fit to ceiling LED Driver Seven (7) driver options available to accommodate 120-277V input and multiple control protocols • For a list of compatible dimmers, refer to ACLXLED3-DIM • Power Factor > 0.9 • Field replaceable from below or above ceiling.Life Rated for 50,000 hrs at 70% lumen maintenance.Warranty - 5YR 5-year limited warranty. Complete warranty terms located at: http://www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspxCodes/Labels UL and cUL listed for through branch wiring, damp locations. Wet location listed with WET option • Meets energy code Air Leakage require-ments per ASTM E283 • ENERGY STAR® Certified with select trims • ICAT rated luminaires with 90CRI light engine are certified to high efficacy requirements of California T24 with select color temperatures and trims • IC housings are rated for direct contact with insulation • AX3SQ A 08LM/12LM and AX3SQ LPA 08LM/12LM are compatible with spray foam insulation with an R-Value of 3.7 per inch or less • Union made.New Construction Mounting Features patented (US Patent 8,038,113) Pro-VI™

bar hanger system, permitting quick placement of housing with 24” on-center joists or suspended ceilings • All fixtures except for AX3SQ A 20LM also feature vertically adjustable mounting brackets (butterfly brackets) • Centerline indicators on plaster frame and patented (US Patent 8,277,090) Tru-Line™ Platform featuring +/- ½” translation and +/- 45° aperture rotation aids fixture alignment after installation, prior to drywall.

Ceiling InstallationSELF-FLANGED

Ceiling < .875“

CTA3SQ/125 Ceiling 0.875” - 1.25”

CTA3SQ/163 Ceiling 1.25” - 1.625”

FLANGELESS, GYPSUM

FMA3SQ/087 Ceiling < .875”

FMA3SQ/125 Ceiling 0.875” - 1.25”

FMA3SQ/163 Ceiling 1.25” - 1.625”

FLANGELESS, WOOD/STONE/TILE 3

SFM3SQ/100 (B,W) Ceiling < 1.00”

SFM3SQ/138 (B,W) Ceiling 1.00” - 1.375”

SFM3SQ/163 (B,W) Ceiling 1.375” - 1.625”

Self-Flanged Flangeless

Junction Box Rated for 4 No. 12 AWG 90° C through branch circuit conductors and includes (6) ½”, (1) ¾”, and (4) Non-metallic sheathed cable knock-outs • Push-in electrical connectors for field connections.Ceiling Thickness 1/2” – 1 5/8” ceiling standard

Specifications subject to change without notice.

1 MVOLT standard on EZ1, EZB, ECOS3, DMXR, DALI. 120 standard for FPC or ECOS22 Must specify 120 or 277 volts. Available on EZ1 or EZB only3 Specify finish : B=Black, W=White

HO

USING

OPTIO

NS

AX3SQ A AX3SQ LPA(Low Profile)

AX3SQ A(20LM ICAT)

4 Must specify flangeless ceiling installation FMA3SQ or SFM3SQ

http://www.junolightinggroup.com

http://www.acuitybrands.com/shell/-/media/Files/Acuity/Other/ACLXLED3-DIM.pdf

http://www.acuitybrands.com/CustomerResources/Terms_and_conditions.aspx


P5.12.10

3” LED UNIVERSAL RECESSEDADJUSTABLE/DOWNLIGHT/WALL WASH

800/1200/1500/2000 LUMENSQUARE ADJUSTABLE BEVEL NEW CONSTRUCTION

AX3SQ with 3SQABV Trim

3SQABV Square Adjustable Bevel

Self-Flanged Flangeless

*TRIM SELECTION

4 1/2" 3 5/8"

* With WET option

CCT/CRI: 80CRI 27K, 30K, 35K, 40KOptic: 12D, 24D, 35D

Construction: ICATCCT/CRI: 90CRI 27K, 30KOptic: 12D, 24D, 35D

13 3/4"Will expandto 24 3/8"

(Reduces to 9 1/4" with breakaway

feature)

13 1/2"18"

5 7/16"8 15/16"

Max.


(Reduces to 10 3/4" with breakaway

feature)

15 1/8"19 5/8"


(Reduces to 10 3/4"with breakaway

feature)

15 1/8"

19 5/8 "

4"

DIMENSIONS

AX3SQ A

AX3SQ LPA

NEW CONSTRUCTION

LOW PROFILE

20LM ICATAX3SQ A

ELECTRICAL DATALumen Package 800 1200 1500 2000

Voltage 120 277 120 277 120 277 120 277

Input Power 11.1W 11.3W 17.0W 17.5W 22.3W 22.6W 29.5W 29.3W

Input Current 0.08 0.04 0.13 0.06 0.17 0.08 0.23 0.10

Frequency 50/60Hz 50/60Hz 50/60Hz 50/60Hz

Power Factor >0.9 > 0.9 > 0.9 > 0.9 > 0.9 > 0.9 > 0.9 > 0.9

ACCESSORIESCat. # Description3AXOPT/12D 12˚ Spot Optic3AXOPT/24D 24˚ Narrow Flood Optic3AXOPT/35D 35˚ Flood Optic3AXOPT/50D 50˚ Wide Flood OpticAF3/10 10˚ Film (Use with Spot Optic)AF3/20 20˚ Film (Use with Spot Optic)AF3/30 30˚ Film (Use with Spot Optic)AF3/40 40˚ Film (Use with Spot Optic)AF3/50 50˚ Film (Use with Spot Optic)AF3/60x1 60˚x1˚ Film (Use with Spot Optic)CGF 200 MPINK Med. Pink Color FilterCGF 200 WRED Warm Red Color FilterCGF 200 DLTBLUE Daylight Blue Color FilterCGF 200 MBLU Med. Blue Color FilterCGF 200 MAMB Med. Amber Color FilterCGF 200 MGRN Med. Green Color FilterDGF 200 DRED Red Dichroic LensDGF 200 MGRN Med. Green Dichroic LensDGF 200 MBLU Med. Blue Dichroic LensDGF 200 DYEL Yellow Dichroic LensDGF 200 MAGEN Magenta Dichroic LensDGF 200 CYAN Blue Green Dichroic LensDCCF 200 HL4250 Daylight Blue Correction LensDIFF 200 Diffuse Spread LensSOLITE 200 Uniformity LensUVF 200 UV Filter LensPRISM 200 Prismatic LensLSPREAD 200 Linear Spread LensHCLBL 200 Hexcell LouverHB1 (2) Real Nail 3 Bar HangersHB26 (2) 26” C-Channel Bar HangersHB50 (2) 50” C-Channel Bar HangersLB27 (2) 27” Linear Bar HangersEMI20 20W Emergency Lighting InverterTo order, specify catalog number.

Desired FWHM Primary Optic Film12˚ 12D -20˚ 12D AF3/1024˚ 24D -30˚ 12D AF3/2035˚ 35D -40˚ 12D AF3/3045˚ 12D AF3/4050˚ 50D -60˚ 12D AF3/5020˚x60˚ 12D AF3/60x1

DIFFUSING FILMSTo achieve the desired beam angle (FWHM), specify the following primary LED optic on the luminaire and order the diffusing film from the table below

ASelf Flanged 4 1/2”Flangeless 3 5/8”

4 1/8” CEILING CUTOUT (REFER TO INSTRUCTION SHEET FOR

FLANGELESS CEILING CUTOUT)

A1 3/4"

Aperture: 1 3/4”



P5.12.10



AX3SQ with 3SQABV TrimPHOTOMETRICSSPOTPHOTOMETRIC REPORTTest Report: PT05150503Catalog No: AX3SQ A 20LM 30K 80CRI 12D FPC 120 3SQABV (Aim at 30˚) Watts: 26.2Lumens: 1619Luminaire LPW: 62

NARROW FLOODPHOTOMETRIC REPORTTest Report: PT05150603Catalog No: AX3SQ A 20LM 30K 80CRI 24D FPC 120 3SQABV (Aim at 30˚)Watts: 26.2Lumens: 1643Luminaire LPW: 63

FLOODPHOTOMETRIC REPORTTest Report: PT05150703Catalog No: AX3SQ A 20LM 30K 80CRI 35D FPC 120 3SQABV (Aim at 30˚)Watts: 26.2Lumens: 1797Luminaire LPW: 69

WIDE FLOODPHOTOMETRIC REPORTTest Report: PT05150803Catalog No: AX3SQ A 20LM 30K 80CRI 50D FPC 120 3SQABV (Aim at 30˚)Watts: 26.2Lumens: 1415Luminaire LPW: 54

LUMEN OUTPUT MULTIPLIERSColor

Temperature CRI Multiplier

Lumen

Package Multiplier2700K 80 0.95 800 0.403000K 80 1.00 1200 0.613500K 80 1.05 1500 0.754000K 80 1.10 2000 1.002700K 90 0.833000K 90 0.87

Vertical Aiming AnglesHorizontal Aiming Angles

CBCP • Centerbeam candlepower FC • Footcandles at beam center (aim point)In vertical aiming applications, aim point (X) is determined by dividing distance from the wall (D) by the tangent of the desired aim angle (A) (0.5774 for 30˚, 1.0 for 45˚).

0° 30° 30° 45°Beam Type

Beam Spread°

CBCP MH FC L W FC L W D FC X L W FC X L W

SP 17927 6 498 1.6 1.6 323 2.2 1.9 3 249 5.2 3.4 1.6 704 3.0 1.7 1.18 280 2.2 2.2 182 2.9 2.5 4 140 6.9 4.6 2.2 396 4.0 2.2 1.5

10 179 2.7 2.7 116 3.6 3.1 5 90 8.7 5.7 2.7 254 5.0 2.8 1.912 124 3.2 3.2 81 4.4 3.7 6 62 10.4 6.9 3.2 176 6.0 3.3 2.314 91 3.8 3.8 59 5.1 4.4 7 46 12.1 8.0 3.8 129 7.0 3.9 2.7

NFL 8254 4 516 1.8 1.8 335 2.5 2.1 2 258 3.5 4.3 1.8 730 2.0 1.9 1.36 229 2.7 2.7 149 3.7 3.1 3 115 5.2 6.5 2.7 324 3.0 2.9 1.98 129 3.6 3.6 84 4.9 4.2 4 64 6.9 8.6 3.6 182 4.0 3.8 2.6

10 83 4.5 4.5 54 6.2 5.2 5 41 8.7 10.8 4.5 117 5.0 4.8 3.212 57 5.5 5.5 37 7.4 6.3 6 29 10.4 12.9 5.5 81 6.0 5.7 3.9

FL 4360 4 273 2.7 2.7 177 3.7 3.1 2 136 3.5 7.9 2.7 385 2.0 3.0 1.96 121 4.0 4.0 79 5.5 4.6 3 61 5.2 11.9 4.0 171 3.0 4.5 2.88 68 5.3 5.3 44 7.3 6.1 4 34 6.9 15.8 5.3 96 4.0 6.0 3.8

10 44 6.6 6.6 28 9.2 7.7 5 22 8.7 19.8 6.6 62 5.0 7.5 4.712 30 8.0 8.0 20 11.0 9.2 6 15 10.4 23.8 8.0 43 6.0 8.9 5.6

WFL 2123 4 133 3.8 3.8 86 5.5 4.4 2 66 3.5 23.5 3.8 188 2.0 4.9 2.76 59 5.7 5.7 38 8.2 6.6 3 29 5.2 35.2 5.7 83 3.0 7.4 4.08 33 7.6 7.6 22 11.0 8.8 4 17 6.9 47.0 7.6 47 4.0 9.8 5.4

10 21 9.5 9.5 14 13.7 11.0 5 11 8.7 58.7 9.5 30 5.0 12.3 6.712 15 11.4 11.4 10 16.4 13.2 6 7 10.4 70.4 11.4 21 6.0 14.7 8.1

12°

35°

24°

50°

CandlepowerDistribution(Candelas) Degrees Vertical Candela 0° 289 5° 461 10° 721 15° 1123 20° 1610 25° 2001 30° 2123 35° 2163 40° 2133 45° 2068 50° 1884 55° 1489 60° 762 65° 14 70° 2 75° 1 80° 0 85° 0 90° 0




1000

2000

3000

4000

5000

6000

7000

0˚ 5˚ 15˚ 25˚

35˚

45˚

55˚

65˚

75˚

85˚90˚

8000

2500

5000

7500

10000

12500

15000

17500

0˚ 5˚ 15˚ 25˚

35˚

45˚

55˚

65˚

75˚

85˚90˚

20000

500

1000

1500

2000

2500

3000

3500

0˚ 5˚ 15˚ 25˚

35˚

45˚

55˚

65˚

75˚

85˚90˚

4000

300

600

900

1200

1500

1800

2100

0˚ 5˚ 15˚ 25˚

35˚

45˚

55˚

65˚

75˚

85˚90˚

2400



P5.12.10



AX3SQ with 3SQABV Trim with WET optionPHOTOMETRICS

0° 30° 30° 45°Beam Type

Beam Spread°

CBCP MH FC L W FC L W D FC X L W FC X L W

SP 8348 6 232 2.1 2.1 151 2.9 2.5 3 116 5.2 4.8 2.1 328 3.0 2.2 1.58 130 2.9 2.9 85 3.9 3.3 4 65 6.9 6.3 2.9 184 4.0 3.0 2.0

10 83 3.6 3.6 54 4.8 4.1 5 42 8.7 7.9 3.6 118 5.0 3.7 2.512 58 4.3 4.3 38 5.8 5.0 6 29 10.4 9.5 4.3 82 6.0 4.4 3.014 43 5.0 5.0 28 6.8 5.8 7 21 12.1 11.1 5.0 60 7.0 5.2 3.5

NFL 5862 4 366 1.8 1.8 238 2.5 2.1 2 183 3.5 4.3 1.8 518 2.0 1.9 1.36 163 2.7 2.7 106 3.7 3.2 3 81 5.2 6.5 2.7 230 3.0 2.9 1.98 92 3.7 3.7 59 5.0 4.2 4 46 6.9 8.7 3.7 130 4.0 3.9 2.6

10 59 4.6 4.6 38 6.2 5.3 5 29 8.7 10.9 4.6 83 5.0 4.8 3.212 41 5.5 5.5 26 7.5 6.3 6 20 10.4 13.0 5.5 58 6.0 5.8 3.9

FL 3627 4 227 2.5 2.5 147 3.5 2.9 2 113 3.5 7.3 2.5 321 2.0 2.8 1.86 101 3.8 3.8 65 5.3 4.4 3 50 5.2 10.9 3.8 142 3.0 4.2 2.78 57 5.1 5.1 37 7.0 5.9 4 28 6.9 14.5 5.1 80 4.0 5.6 3.8

10 36 6.3 6.3 24 8.8 7.3 5 18 8.7 18.2 6.3 51 5.0 7.1 4.512 25 7.6 7.6 16 10.5 8.8 6 13 10.4 21.8 7.6 36 6.0 8.5 5.4

WFL 1867 4 117 3.7 3.7 76 5.3 4.2 2 58 3.5 20.1 3.7 165 2.0 4.7 2.66 52 5.5 5.5 34 7.9 6.4 3 26 5.2 30.2 5.5 73 3.0 7.0 3.98 29 7.4 7.4 19 10.6 8.5 4 15 6.9 40.3 7.4 41 4.0 9.3 5.2

10 19 9.2 9.2 12 13.2 10.6 5 9 8.7 50.4 9.2 26 5.0 11.7 6.512 13 11.0 11.0 8 15.8 12.7 6 6 10.4 60.4 11.0 18 6.0 14.0 7.8

1000

2000

3000

4000

5000

6000

7000

0˚ 5˚ 15˚ 25˚

35˚

45˚

55˚

65˚

75˚

85˚90˚

8000

SPOT

PHOTOMETRIC REPORTTest Report: PT05150505Catalog No: AX3SQ A 20LM 30K 80CRI 12D FPC 120 3SQABV WET (Aim at 30˚)Watts: 26.2Lumens: 1369Luminaire LPW: 52


800

1600

2400

3200

4000

4800

5600

0˚ 5˚ 15˚ 25˚

35˚

45˚

55˚

65˚

75˚

85˚90˚

6400

NARROW FLOOD



500

1000

1500

2000

2500

3000

3500

0˚ 5˚ 15˚ 25˚

35˚

45˚

55˚

65˚

75˚

85˚90˚

4000

FLOOD



150

450

750

1050

1350

1650

1950

0˚ 5˚ 15˚ 25˚

35˚

45˚

55˚

65˚

75˚

85˚90˚

2250

WIDE FLOOD



LUMEN OUTPUT MULTIPLIERSColor

Temperature CRI Multiplier

Lumen

Package Multiplier2700K 80 0.95 800 0.403000K 80 1.00 1200 0.613500K 80 1.05 1500 0.754000K 80 1.10 2000 1.002700K 90 0.833000K 90 0.87

Vertical Aiming AnglesHorizontal Aiming Angles

CBCP • Centerbeam candlepower FC • Footcandles at beam center (aim point)In vertical aiming applications, aim point (X) is determined by dividing distance from the wall (D) by the tangent of the desired aim angle (A) (0.5774 for 30˚, 1.0 for 45˚).

12°

35°

24°

50°


ax3sq with 3sqabv trim - usesi · 2018. 6. 3. · printed in u.s.a. ©2017 acuity brands lighting,...

Documents