Balanced Flue Gas Fires

6000TRSI with Luna Polished concrete surround.

550TRSI with 3-sided black trim

550TRSI pebbles with 4-sided stainless steel trim and full stainless steel front.

REAR VENT

outside wall

convective heat

radiant heat

convection air intake

exhaust gas

outside air for combustion

fan

TOP VENT

convective heat

radiant heat

convection air intake

exhaust gas

outside air for combustion

outside wall

fan

A Heat & Glo is an impressive feature, offering installation ease and versatility.

Anywhere… any styleHeat & Glo balanced flue fires are so easy to install, with straight out the back venting options, they’re ideal for multi-storey dwellings on an outside wall. Heat & Glo units can also be vented in a number of versatile vertical and horizontal flueing options. In fact you can vent Heat & Glo units up to 4.9m* horizontally with up to three 90 degree bends. Your fireplace can be virtually anywhere and any style.

*Refer to manual for details.

6000TRSI with 4-sided stainless steel trim.

350TRSI with 4-sided stainless steel trim.

550TRSI with 4-sided black trim.

Heat & Glo balanced flue fires – the healthiest way to heat your home.

Balanced flue technologyA completely sealed system, Heat & Glo balanced flue gas fireplaces draw 100% of combustion air from the outdoors and exhaust all combustion by products back outside, with no affect on indoor air quality. In addition, cold air drafts are eliminated and heat output is maximised. No power or fan is needed to achieve this.

Ignition SystemThe Intellifire Plus remote will automatically lower flame heights and cycle the fire on and off in a thermostat mode, thereby reducing fuel consumption and running costs. Never again will you manually light a pilot or bend down to start your fireplace.

IntelliFire Plus features battery back-up, ensuring your fire will operate during a power outage.

XLR Plus logs with Lava Red Martini front.

XLR Plus with Pebbles and Graphite Tonic mesh front.

XLR Plus with Porcelain base and Fog Grey Tonic mesh front.

XLR Plus –

a modern marvel.

The XLR Plus is a modern marvel. Downtown, uptown and everywhere in between, when looks matter it’s your style.

Mix and match with modern decor. A fireplace so cool, it’s hot and highly efficient at setting the mood.

Define your fire with your choice of Martini double-glass front or the Tonic sheer mesh front available in a range of colours and stainless steel.

Logs, pebbles or reflective porcelain allow you to create the combination of art and fire to accent your décor.

The XLR is a direct vent Balanced flue gas fire with vertical and horizontal venting options.*

*See manual for details.

STHVBI with 3-sided stainless steel trim.

STHVBI with 4-sided stainless steel trim. STHVBI with marble trim.

STHVBI with 4-sided stainless steel trim.

STHVBI – Beauty you can see through.

Create a divide between two rooms or simply an impressive room divider the Heat & Glo STHVBI with its stunning logset and high variable flame pattern is truly ‘Beauty you can see through’.

Cosmo I30 pebbles with Halo front.

Supreme I30 with standard black DF front.

Supreme I30 with 3-sided stainless steel trim

Convert your existing fireplace with the I30 series and enjoy clean exceptional heat.

The I30 Series is the ultimate insert for your existing fireplace, featuring all the benefits of Balanced flue technology and efficient space heating with a stunning logset (Supreme I30) or pebbles or glass media (Cosmo I30).

The I30 is simple to install. Featuring dual flexi flues – one flue draws air from outside for combustion and the other flue expels the fumes. The I30 is completely airtight so absolutely no fumes will spill back into your room. Brilliant for your indoor air quality.

Choose from a range of décor finishing options including the Martini double- glass door, the Halo front (Cosmo only), 3-sided and 4-sided stainless steel or black trims or a range of mantelpiece and fascia options. The I30 Series can be built in as a new fireplace application.

Cosmo I30 100mm 3-sided black trim

Supreme I30 100mm 3-sided stainless steel trim

Supreme I30 100mm 4-sided black trim

Cosmo I30 100mm 4-sided stainless steel trim

A RANGE OF FLAT TRIM OPTIONS ARE ALSO AVAILABLE FOR THE DF STANDARD FRONT

outsideair for

combustion

blowerblower

radiant heat

convective heat

DUAL 3” (75mm)

VENTING

550TRSI with Marseilles Pearla Honed marble mantelpiece.

350TRSI with Echo Polished concrete surround.

550TRSI with Classic fascia and MDF Rosette mantelpiece.

6000TRSI with Pattern square fascia and Modena Limestone mantelpiece.

Supreme I30 with Victorian fascia and Windsor MDF painted mantelpiece.

350TRSI with 4-sided Shire Newton fascia with Cranbourne MDF mantelpiece.

Stylish Surround Options

Specifications

www.jetmaster.com.au

Call into your nearest Jetmaster showroomNSW 10 Martin Ave, Arncliffe 02 9597 7222 167 Eastern Valley Way, Castlecrag 02 9958 1777 3/10 Salisbury Rd, Castle Hill 02 9680 7279 17A Lyell St, Mittagong 02 4872 2234 334 Brunker Rd, Adamstown, Newcastle 02 4952 9299

QLD 59 Pineapple St, Zillmere 07 3263 4955SA 19 Marlow Rd, Keswick, Adelaide 08 8371 1222VIC 444 Swan St, Victoria 03 9429 5573WA 277 Lord St, East Perth 08 9228 2600

Disclaimer: All products are subject to availability and may be changed without notice.

Dimensions above are in millimetres and for reference only. Refer to installation manual for detailed specifications on installing this product and framing specifications.*Indicates height to top of hood.

6000TRSI 1043 917 850* 1019 547 250 203 686 800 x 475 High Ng 36 High Lpg 34 Ng 7.9

Low Ng 25 Low Lpg 24 Lpg 7.5

550TRSI 913 790 765* 877 414 191 168 top

593 670 x 410 High Ng 28 High Lpg 26 Ng 5.9

203 rear Low Ng 20 Low Lpg 18 Lpg 5.5

350TRSI 837 714 710* 827 414 191 168 top

542 610 x 385 High Ng 21 High Lpg 20 Ng 4.5

203 rear Low Ng 15 Low Lpg 14 Lpg 4.3

STHVBI 1183 1067 919 610 882 306 203 N/A 815 x 455 High Ng 44 High Lpg 43 Ng 8.6

Low Ng 30.8 Low Lpg 30 Lpg 8.4

XLR PLUS See diagram for measurements 1100 x 310 High Ng 26 High Lpg 26 Ng 5.0

Low Ng 18 Low Lpg 18 Lpg 5.0

COSMO I30 See diagram for measurements 700 x 300 High Ng 26.5 High Lpg 25 Ng 6.0

Low Ng 18 Low Lpg 17 Lpg 6.0

SUPREME I30 See diagram for measurements 700 x 300 High Ng 32 High Lpg 31 Ng 7.4

Low Ng 22 Low Lpg 21 Lpg 7.4

MODEL A B C D E F G H VIEWING AREA INPUT mJh kWh OUTPUT

6000TRSI550TRSI350TRSI

Top View

Left Side View Front View Right Side View

STHVBI (SEE THROUGH)

Left Side View Left Side ViewFront View

I30 SERIES INSERT

Left Side View Front View

All units come standard with the

multi-function programmable remote. Features auto

battery back-up, fan speed and flame height control,

thermostat and countdown timer.

XLR PLUS Top View