When considering patient outcomes for multifocal toric lens wear, ECPs rank seamless vision at all distances as most significant.1

SEAMLESS VISIONThe 3-Zone Progressive™ Design includes three distinct power zones to

deliver exceptional vision and seamless transitions across all distances.

PROVEN LENS DESIGNLike Bausch + Lomb ULTRA® for Presbyopia, this lens features

large areas of consistent focusing power in the near, intermediate,

and distance zones.

Bausch + Lomb ULTRA® Multifocal for Astigmatism

B A U S C H + L O M B U L T R A ® MULTIFOCAL FOR ASTIGMATISM 95%

16 HOURS2

M A I N TA I N S

O F I T S M O I S T U R E F O R A F U L L

When considering a successful multifocal toric lens fitting experience,

ECPs rank minimal rotation as most significant.1

STABLE FITThe OpticAlign® Design provides ballasting in the

lower hemisphere to minimize lens rotation—

≤5° rotation for 95% of patients.2

0 TO 5 DEGREES 95%

6 TO 10 DEGREES 5%

11 TO 15 DEGREES 0

> 16 DEGREES 0

EXCELLENT 86%

GOOD 14%

FAIR 0

POOR 0

ADEQUATE 100%

EXCESSIVE 0

INSUFFICIENT 0

ADHERENCE 0

ON-EYE CLINICAL RESULTS 2*

Rotation, centration, and movement of Bausch + Lomb ULTRA®

Multifocal for Astigmatism at dispensing

M O V E M E N TC E N T R AT I O NR O TAT I O N

*(n=42 eyes)

Pow

er (

D)

Radial Displacement (mm)

0.5

Near DistanceIntermediate

0.0 1.0 1.5 2.0 2.5 3.0

MATERIAL: samfilcon A

LENS MATERIAL TECHNOLOGY:

MoistureSeal® technology

WATER CONTENT: 46%

OXYGEN PERMEABILITY: 114 Dk

LENS DESIGN TECHNOLOGY:3-Zone Progressive™ design, OpticAlign™ design

BASE CURVE: 8.6 mm

DIAMETER: 14.5 mm

SPHERICAL POWERS: +4.00D to -6.00D in 0.25D steps

CYLINDER POWERS: -0.75D, -1.25D, -1.75D

AXES: 10º to 180º in 10º steps

ADD POWERS:Low: +0.75D to +1.50DHigh: +1.75D to +2.50D

VISIBILITY TINT: Light blue

WEAR SCHEDULE: Up to 7 days extended wear and daily wear

REPLACEMENT SCHEDULE: Monthly

LENS PARAMETERS

F I T T I N G G U I D E

B A U S C H + L O M B U L T R A®

See package insert for more information.

BRING INNOVATION TO MORE PATIENTS

SPECTACLE ADD BOTH EYES

+0.75D to +1.50D Low Add

+1.75D to +2.50D High Add

STEP 1: Update spectacle refraction and Add power

STEP 2: Select toric lens power (adjusted for vertex distance if necessary)

STEP 3: Select Add power following guidance below:

EVALUATE THE LENS FOR SUCCESS

• Allow trial lenses to equilibrate for at least 10 minutes before assessing fit and vision

• Confirm axis orientation

• Evaluate distance and near vision binocularly in normal room illumination

• If vision at distance and near are satisfactory, dispense lenses and schedule follow-up exam within 1–2 weeks

ADD SELECTION:

MULTIFOCALASTIGMATISM

for

Always direct the patient to read and follow the label to use the product properly. For complete product information including approved indication, restriction, cautions and warnings, please refer to product insert.

Bausch & Lomb Canada, Vaughan, Ontario, L4K 4B4 ®/™ are trademarks of Bausch & Lomb Incorporated or its affiliates. © Bausch Health, Canada Inc. TP16570

DISTANCE VISION

• Confirm axis orientation

• Determine eye dominance

• Follow guidance below

REFINE IF NEEDED

IF P

AT

IEN

T I

S W

EA

RIN

G:

TW

O L

OW

AD

DS

DOMINANT EYE NON-DOMINANT EYE DOMINANT EYE NON-DOMINANT EYE

Initial Lens Low Add Low Add Initial Lens Low Add Low Add

Refinement 1 Low Add High Add Refinement 1 Bausch + Lomb ULTRA® for Astigmatism

Low Add

Refinement 2: If vision is still unsatisfactory, make small changes by adding +0.25D at a time to non-dominant eye (wearing High Add lens) using hand-held lenses, and continue evaluating vision binocularly in normal room illumination. Adjust contact lens power when vision is satisfactory.

Refinement 2: If vision is still unsatisfactory, make small changes by adding -0.25D at a time to dominant eye (wearing Bausch + Lomb ULTRA® for Astigmatism) using hand-held lenses, and continue evaluating vision binocularly in normal room illumination. Adjust contact lens power when vision is satisfactory.

TW

O H

IGH

AD

DS

DOMINANT EYE NON-DOMINANT EYE DOMINANT EYE NON-DOMINANT EYE

Initial Lens High Add High Add Initial Lens High Add High Add

Refinement 1 High Add Add +0.25D to the non-dominant eye

Refinement 1 Low Add High Add

Refinement 2: If vision is still unsatisfactory, make small changes by adding +0.25D at a time to non-dominant eye using hand-held lenses, and continue evaluating vision binocularly in normal room illumination. Adjust contact lens power when vision is satisfactory.

Refinement 2: If vision is still unsatisfactory, make small changes by adding -0.25D at a time to dominant eye (wearing Low Add lens) using hand-held lenses, and continue evaluating vision binocularly in normal room illumination. Adjust contact lens power when vision is satisfactory.

NEAR VISION