beam pumping workshop houston, texas october 4 - 7, 2005 converting api 11b specification for sucker...
DESCRIPTION
Oct , Beam Pumping Workshop3 Committee Members API Membership Qualifications Function and Responsibility ISO and API CooperationTRANSCRIPT
Beam Pumping WorkshopHouston, Texas
October 4 - 7, 2005
Converting API 11B Specification for Sucker Rods to ISO 10428Sid Thomas Wilson International
Chairman API Sub-Committee 11
Oct. 4 - 7, 2005 2005 Beam Pumping Workshop 2
Standards Historyand Relevance
• Standards Importance – Specification vs. Recommended Practice
• History of 11B First Print 1927• Driving Influences for Specifications
Oct. 4 - 7, 2005 2005 Beam Pumping Workshop 3
Committee Members
• API Membership Qualifications• Function and Responsibility• ISO and API Cooperation
Oct. 4 - 7, 2005 2005 Beam Pumping Workshop 4
ISO Fast Track Documents
• Examples 11B & 11E• Methodology – Industry Needs• Difference ISO and API Documents
Oct. 4 - 7, 2005 2005 Beam Pumping Workshop 5
ISO Process
• Format• Process Five Levels of Approval• Industry Compliance
Oct. 4 - 7, 2005 2005 Beam Pumping Workshop 6
Df Ws
WI
Du
CR
AR
X
Shape optional with manufacturer
Notes:See Table A-3.See Figure 3 for details of shoulder connection.
Figure 1 – General dimensions for steel sucker rod pin ends
Diameter of rod body15.88 mm, +0.18/-0.36 19.05 mm, +0.20/-0.41 22.23 mm, +0.20/-0.41 25.40 mm, +0.23/-0.46 28.58 mm, +0.25/-0.51
(5/8 inch) (+.007/-.014) (3/4 inch) (+.008/-.016) (7/8 inch) (+.008/-.016)
(1 inch) (+.009/-.018) (1-1/8 inch) (+.010/-.020)
Outside diameter of pin shoulder Df
31.8 mm, +0.13/-0.25
38.1 mm, +0.13/-0.25 41.3 mm, +0.13/-0.25 50.8 mm, +0.13/-0.25 57.2 mm, +/- 0.38
(1.250 inches) (+.005/-.010) (1.500 inches) (+.005/-.010) (1.625 inches) (+.005/-.010) (2.000 inches) (+.005/-.010) (2.250 inches) (+/- .015)
Width of wrench square WS 22.2 mm, +/-0.8 25.4 mm, +/-0.8 25.4 mm, +/-0.8 33.3 mm, +/-0.8 38.1 mm, +/-0.8
(7/8 inch) (+/- 1/32) (1 inch) (+/- 1/32) (1 inch) (+/- 1/32) (1-5/16 inches) (+/- 1/32) (1-1/2 inches) (+/- 1/32)
Length of wrench square W1 (minimum length, exclusive of fillet)
31.8 mm 31.8 mm 31.8 mm 38.1 mm 41.3 mm
(1-1/4 inches) (1-1/4 inches) (1-1/4 inches) (1-1/2 inches) (1-5/8 inches)
Length of sucker rod (measured from contact face of pin shoulder to contact face of pin shoulder)
7518/9042 mm, +/- 51
7518/9042 mm, +/- 51
7518/9042 mm, +/- 51
7518/9042 mm, +/- 51
7518/9042 mm, +/- 51
(296/356 inches), (+/- 2.0 )
(296/356 inches), (+/- 2.0 )
(296/356 inches), (+/- 2.0 )
(296/356 inches), (+/- 2.0 )
(296/356 inches), (+/- 2.0 )
Length of pony rods (measured from contact face of pin shoulder to contact face of pin shoulder)
508/1118/1727/2337/2946 mm +/- 51
508/1118/1727/2337/2946 mm +/- 51
508/1118/1727/2337/2946 mm +/- 51
508/1118/1727/2337/2946 mm +/- 51
508/1118/1727/2337/2946 mm +/- 51
(20/44/68/92/116 inches) (+/- 2.0 inches)
(20/44/68/92/116 inches) (+/- 2.0 inches)
(20/44/68/92/116 inches) (+/- 2.0 inches)
(20/44/68/92/116 inches) (+/- 2.0 inches)
(20/44/68/92/116 inches) (+/- 2.0 inches)
Diameter of bead DU 31.1 mm +0.13/-3.17 35.7 mm +0.13/-3.17 38.1 mm +0.13/-3.17 48.4 mm +0.13/-4.76 55.6 mm +0.13/-4.76
(1-7/32 inches) (+.005/-1/8) (1-13/32 inches) (+.005/-1/8) (1-1/2 inches) (+.005/-1/8)
(1-29/32 inches) (+.005/-3/16) (2-3/16 inches) (+.005/-3/16)
AR (Typically verified in forging die qualification)
47.6 mm, +/- 3.17 57.1 mm, +/- 3.17 66.7 mm, +/- 3.17 76.2 mm, +/- 3.17 85.7 mm, +/- 3.17
(1-7/8 inches) (+/- 1/8) (2-1/4 inches) (+/- 1/8) (2-5/8 inches) (+/- 1/8) (3 inches) (+/- 1/8) (3-3/8 inches) (+/- 1/8)
CR (Typically verified in forging die qualification)
3.2 mm, +1.59/-0.40 3.2 mm, +1.59/-0.40 4.8 mm, +1.59/-0.40 4.8 mm, +1.59/-0.40 4.8 mm, +1.59/-0.40
(1/8 inch) (+1/16/-1/64) (1/8 inch) (+1/16/-1/64) (3/16 inch) (+1/16/-1/64) (3/16 inch) (+1/16/-1/64) (3/16 inch) (+1/16/-1/64)
General Dimensions
Oct. 4 - 7, 2005 2005 Beam Pumping Workshop 7
Changes Through the ISO Process
• Allowing for New Technologies• Maintaining Interchangeability• Driving Factors
Oct. 4 - 7, 2005 2005 Beam Pumping Workshop 8
ISO Format and Structure
• Ten Sections In Completed Documents• Metric System US Units Secondary• User Functionality
Oct. 4 - 7, 2005 2005 Beam Pumping Workshop 9
Existing Issues and Future Challenges
• Major Obstacles Surface Discontinuities• Technical Measurement Accuracies• End User Focus and Industry Compliance
Oct. 4 - 7, 2005 2005 Beam Pumping Workshop 10
Questions and Contact Information
• Sid Thomas • Email [email protected] • Phone 432-688-0478
• Benny Williams• Email chief [email protected]• 817-297-2211