The Beonic Thermal Sensors ELis a state-of-the-art, extremelyaccurate, ceiling mounted, people counter.

These sensors are high quality,compact devices of robustconstruction, are reliable in a wide variety of environments.Though inconspicuous, they canbe found in many of Australia’sbusiest public areas.

The Beonic Thermal Sensor EL is powered by the Beonic Event Logger that can collate data from a range of differentsensors.

It employs a high accuracy,Infra-red, heat-sensitive sensorto count body heat going in multiple directions.

Freecall > 1800 246 860> > www.beonic.com

How do Thermal Sensors work?

BEONIC THERMAL SENSORS CAN BE LINKED TOGETHER FOR WIDE ENTRANCES

> >Thermal Sensor EL

MASTER SENSOR SLAVE SENSORS SLAVE SENSORS

OR

PowerChannel 1/2 Channel 3/4 Channel 5/6 Channel 7/8

RS232Ethernet 2

ETHERNET CABLE

Ethernet 1

EVENT LOGGER(SUPPLIES POWER)

NETWORK ROUTER

ADDITIONALSENSORINPUTS

>>

>

Why choose the Beonic Thermal Sensor EL?

• Highly accurate

• Operates independent of ambient light

• Unobtrusive and visually discreet

• Low installation and ongoing maintenance costs

• Economical, �exible and reliable

• Overhead positioning eliminates sensor blocking

Capabilities of the Beonic Thermal Sensor EL

• Determine tra�c volume into and aroundshopping centres, retail outlets, car parks, hospitality venues and public spaces

• Count tra�c in two directions

• Distinguishes people entering “side-by-side”

• Excludes “dithering” tra�c and U-turns

The Beonic Thermal Sensor EL is ideally suited to

counting tra�c in busy areas and entrances as

it doesn’t su�er the inaccuracies of beam and

video counters. The high accuracy of the Beonic

Thermal Sensor EL provides solid and reliable data.

This data provides the foundation for modern

tra�c and sales analysis, critical for informed and

e�ective management.

Summary

> > www.beonic .com

>

Ground Floor, 28-30 Jackson St, Toorak, Victoria 3142Telephone +61 3 9637 7890 Fax +61 3 9637 7899

BEONIC PTY LTDABN 18091763585

Network Types Single or master with up to 6 slaves

Power 10-28V DC power from Beonic Event Logger

Current Consumption 65 mA ± 20%

Light Thermal Image

Switching Frequency 700 Hz

Enclosure Rating IP55 (Dust proof)

Circuit Protections Reverse-polarity, Over-current

Operating Temperature 0o to +40 o C

Weight 80 grams

Cable CAT5e , 100m maximum

Options • 60o, 40o or 20o lenses• Indoor/Outdoor ceiling mounts• Wall mounting bracket

Specifications Thermal Sensor EL

Dimensions >

Sensor Configuration >

>

>

>

> >

111mm

65mm

50mm

Standard Beonic Thermal Sensors have a 60o �eld of view, making them suitable for ceiling heights between 2.5 - 4.8m.

Narrower 40o lenses are available that aresuitable for ceilings between 4 - 7.5m.For outdoor applications a 20o lense is also available that has a range of 7 - 12m.

During the con�guration process, itis important to design the zone and minimize the possibility of leakage. Both the zone line position and shapecan be con�gured. A count is recordedwhen a person crosses the designated line in a speci�c direction.

Directional and non-directional count recording is also user selectable.

Height2.5 - 4.8m

Width: 2.5 - 5m

2.5 - 5m

Standard Con�gurationAlternative User De�ned Con�guration

Freecall > 1800 246 860 Beonic® is a registered trademark of Beonic Corporation Pty Ltd. All other brand and productnames are trademarks of their respective owners. Speci�cations subject to change without notice.

Thermal Sensor EL

Gary McDougall

info@peoplecoun ngsystems.com.au

Mob: 0487 946 622

Your Beonic Reseller: