contentber-1560 data transmission analyzer 7 datacom pdh testing ber-1530 data transmission analyzer...
TRANSCRIPT
Content
Product Series Model Name Page
Optical Power OFT-1135 Optical Light Source 1
Meters, Light OFT-1145 Optical Power Meter 1
Sources &
OFT-1155
Optical Attenuator
1
Attenuators
Series OFT-1165 Optical Loss Test Set 1
OFT-1136 Visual Fault Locator 2
Fiber Inspection, OFT-1170 Optical Cable Identifier 2
Optical Identifiers & Fault DD-FCI-10 Fiber Cable Investigator 2
Locators Series DD-FCI-20 Fiber Cable Investigator 3
DD-FCFT-50 Fiber Cable Fault Tracker 3
OTDR
DD-OTDR-30 Optical Time Domain Reflectometer 4
DD-OTDR-60
Optical Time Domain Reflectometer
4
OFT-1120A PON Power Meter 5
FTTx MST-3530S
FTTx Network Multi-function 5
Maintenance Terminal
SDH Testing
SDH-1620A SDH /PDH Transmission Analyzer 6
Transport
SDH-1620L
SDH /PDH Transmission Analyzer
6
BER-1560
Data Transmission Analyzer
7
Datacom
PDH Testing
BER-1530
Data Transmission Analyzer
7
BER-1580 Data Transmission Analyzer 7
IAT-1710E Integrated Access Tester 8
Ethernet Testing GEA-8130A Ethernet Analyzer 8
Network NTA-8710A Reflector 9
Cable Testing
TPT-8020A Cable Tester 9
TPT-8010A
Tone Tracker
9
Copper
ADSL Testing DA280 ADSL2+ Tester 10
ADSL&VDSL
DSL-3011A
xDSL Tester
10
Access
Testing
DSL-3020V
xDSL Tester
10
Battery ISBA-5210A Cranking Battery Analyzer 11
Analyzer ISBA-5218A Battery Analyzer 11
Antenas Chile Ltda.
1. Optical 1.1 Optical Power Meters, Light Sources & Attenuators Series
Products Functions Features
1. Wavelength(nm):850/1300/1310/1490
/1550/1625;
1. 1-3 wavelengths output on 2. Output Power:
a single port; > - 6dBm:1310nm/1490nm/1550nm
/1625nm
2. High stabilization, built-in
> -10dBm:850nm/1300nm;
optic isolator;
3. Tone frequency:270Hz,1KHz,2KHz; 3. VFL function(Optional);
4. Connector:FC/PC; OFT-1135 Optical Light 4. Energy save mode.
5. Power Supply:AA×2 batteries or Source
AC/DC power supply adapter;
6. Operate Time:About 16 hours.
1. Wavelength(nm):850/1300/1310/
1490/1550/1625;
1. FC/SC/ST adapters; 2. Accuracy:±0.2dB;
2. Data storage; 3. Resolution:0.01dB;
3. Reference value storage; 4. Connector:FC&2.5mm UPP
4. VFL function(Optional); (Option: SC/ST);
5. Energy save mode. 5. Power Supply:AA×2 batteries or
OFT-1145 Optical Power AC/DC power supply adapter;
Meter 6. Operate Time:About 160 hours.
1. 1-3 wavelengths output on
1. Wavelength(nm):1300/1490/1550;
2. Attenuator range:40/60/80 dB; a single port;
3. Resolution:0.1dB;
2. Different attenuator range;
4. Connector:FC/PC;
3. Can save current value as
5. Power Supply:AA×3 batteries or
reference;
AC/DC power supply adapter;
4. Can save 10 tracks
6. Operate Time:About 30 hours.
OFT-1155 Optical
attenuation value;
5. Energy save mode.
Attenuator
1. Wavelength(nm):850/1300/1490
/1550;
1. Data storage; 2. Output Power:
2. OPM/OLS/VFL in one > - 6dBm:1310nm/1490nm/1550nm;
device; > -10dBm:850nm/1300nm;
3. Auto wavelength 3. Tone frequency:270Hz,1KHz,2KHz;
detection(Optional); 4. Accuracy:±0.2dB;
OFT-1165 Optical Loss Test 4. Energy save mode. 5. Connector:FC/SC&2.5mm UPP;
Set 6. Power Supply:AA×2 batteries or
AC/DC power supply adapter.
Page 1 of 11
Antenas Chile Ltda.
1.2 Fiber Inspection, Identifiers & Fault Locators Series
Products Functions Features
1. Wavelength:650nm±20nm;
1. Bright red laser at 650nm; 2. Operation Mode:Pulsed(2Hz)/CW;
2. Pulsed and CW operation; 3. Output Power:1/10/15/20/25mW;
3. Fast locate the broken 4. Connector:2.5mm or 1.25mm Universal
point; connector;
4. Rugged and waterproof 5. Power Supply:AA×2 batteries or AC/DC
design. power supply adapter;
OFT-1136 Visual Fault Locator 6. Operate Time:About 50 hours.
1. Wavelength Range:800nm~1700nm;
1. Indicate the signal 2. Detector Type:InGaAs 2pcs;
directions in fiber; 3. Fiber Type:0.9/0.25/2.0/3.0mm fiber;
2. Indicate the signal 4. Detect Tones:270Hz/1kHz/2kHz;
presence or absence; 5. Accuracy:+10dBm to -30dBm
OFT-1170 Optical Cable 3. Build in VFL; (Continuous Wave)/+10dBm to
Identifier 4. Battery low indication. -25dBm(Modulated Signal);
6. Power Supply:AA×2 batteries.
1. Easy to use with
touchscreen and keys;
2. Strong on-spot application
capacity can meet the 1. Wavelength:1550nm;
demands of accurately
2. Minimum output power of light
searching the target cable
source:-15/-8dBm;
when looking over the
3. Maximum detection distance:
directly-buried cable and
20km/40km;
pipe cables or cutting
4. Connector:FC/APC;
cables;
5. Power Supply:Lithium battery
3. Monitoring the mechanical
7.4V/10.4A or AC/DC power supply
DD-FCI-10 Fiber Cable
vibration conditions of the
adapter;
Investigator
far-end cables;
6. Operate Time:About 14 hours.
4. VFL visible failure location
port, which helps
accurately orientate the
target cable.
Page 2 of 11
Antenas Chile Ltda.
Products Functions Features
1. Easy to use with
touchscreen and keys; 1. Wavelength:1550nm;
2. Senses mechanical
2. Minimum output power of light
vibration of optical cables
source:-15dBm;
over hundreds of
3. Unidirectional loss of optical cable:
kilometers;
10/28dB;
3. Identifies target optical
4. Maximum detection distance:
cables via audio or visual
40km/100km;
signals (bar graph or pulse
5. Connector:FC/APC;
mode) in complex
6. Power Supply:Lithium battery
DD-FCI-20 Fiber Cable
environments;
7.4V/10.4A or AC/DC power supply
Investigator
4. Automatic and manual
adapter;
operation modes;
7. Operate Time:About 14 hours. 5. Lossless detection and high
identification accuracy.
1. Only need two or three
times tracking can guide
the constructors to find
the fault site, make the
repairing efficiently;
2. Accurate positioning: 1. Wavelength: 1310/1550nm;
Locate accurately, make up 2. Dynamic:35dB;
the cable data accurately 3. Distance scope (km): 0.3 to180;
and perfectly; 4. Connector:FC/UPC;
3. Tracking cable without 5. Measurement duration:Defined by
hurt , no need to open the user/ 5s/10s/15s/30s/1min/2min/3min;
DD-FCFT-50 Fiber Cable Fault
cable connecting 6. Distance measurement precision:
box,usually do not need
±(1m+5x10-5
xDistance+Sampling Tracker
operate in the well, keep
interval).
constructors far from
danger.
4. Simple and convenient:
Easy to operate, easy to
use, make things easy.
Page 3 of 11
Antenas Chile Ltda.
1.3 Optical Time Domain Reflectometer(OTDR)Series
Products Functions Features
1. Determine fiber optic cable or 1. Wavelength:1310/1550nm;
fiber optic’s failure point, 2. Dynamic:30/28dB;32/30dB;
connection point, breakpoint 3. Distance range(km):0.3 / 1 / 5 / 10 /
position; 30 / 60 /120;
2. Describe fiber optic cable or 4. Maximum detection distance:
fiber’s loss distribution curve, 40km/100km;
measure cable, fiber’s length and 5. Connector:FC/UPC;
the loss, attenuation coefficient 6. Measurement duration:
DD-OTDR-30 Optical between two points; 15s/30s/1min/2min/3min;
Time Domain 3. Measure fiber optic cable, optical 7. Distance measurement precision:
Reflectometer fiber connector’s insertion loss ±(1m+5x10-5
xDistance+Sampling
and reflection loss. interval).
1. Automatic Measurement Mode:
Only by selecting the
measurement wavelength, the
measurement parameters are
automatically set, and the trace
data is automatically saved;
2. Multi-wavelength Measurement
Mode: In the parameter setting, 1. Wavelength:850/1300/1310/1490/155
the wavelength can be
0/1625nm;
automatically switched into the
2. Dynamic:
multi-wavelength measurement
20/18dB;22/20dB;32/30dB;36/34dB;38/3
mode. Under this mode, the
6dB;42/40dB;
analysis can be achieved on the
3. Distance scope (km): 0.3 to180;
attenuation state of the same
4. Connector:FC/UPC;
fiber section under different
5. Measurement duration: Defined by
DD-OTDR-60 Optical
wavelengths;
user/5s/10s/15s/30s/1min/2min
Time Domain
3. Trace Fixing Function: It can
/3min;
Reflectometer
achieve the same-screen
6. Distance measurement precision:
comparison and display of one
±(1m+5x10-5
xDistance+Sampling trace with another real-time trace
interval). or the trace under the average
measurement, which is very
useful for the installation of
multi-core fiber or the checking
of the aged fiber in the optical
fiber network already been
installed;
4. Multi-wavelength Analysis
Page 4 of 11
Antenas Chile Ltda.
Products Functions Features
Function: It can achieve the
comparison, display and analysis
functions of any trace file;
5. FTTx online testing, able to
identify the splitter and the
fiber’s end.
1.4 FTTx
Products Functions Features
1. TFT color display, touch screen 1. Test three wavelength signal
operation; including1490nm,1550nm,
2. Graphical interface, one interface 1310nm;
can display all measurement 2. Dual-port design for pass through
results; mode, support online monitoring
3. Power values adapt and termination measurement;
green/yellow/red to distinguish 3. Provide ten groups of threshold
OFT-1120A PON Power pass/alarming/fail status; selection;
Meter 4. Built-in large capacity Li-ion 4. Built-in 500 records and upload via
battery, long operation time. USB port.
1. Integrated Network
multi-function maintenance like
optical power meter, red light
source functions, support ONU,
xDSL simulation, PC simulation
and cable tracing, broadband
speed testing and other 1. Important resource verification;
professional test function as a
2. EPON/GPON simulation test;
whole maintainer can solve all
3. PC simulation;
problems with one tester;
4. Electric Worksheet Management;
MST-3530S FTTx 2. Can be installed electronic
5. Mobile phone function;
Network
operation and maintenance
6. Bar code scanning.
Multi-function
software based on Android
Maintenance Terminal system to improve the efficiency
of installing and maintenance
and control efforts, WLAN RF
signal strength and covering
area, simulate wireless network
card to connect network.
Page 5 of 11
Antenas Chile Ltda.
2. Transport Datacom 2.1 SDH Testing
Products Functions Features
1. BER test for SDH and PDH;
2. Anomaly / defect test; 1. Easy to use, 10.4” color LCD,
3. Pointer monitoring; touch screen, pen operation;
4. APS / Service Disruption 2. Support line rate up to 2.5Gbps;
testing; 3. Multi-task capability;
5. Tributary scan; 4. Clock interface;
SDH-1620A
6. Timing and synchronization 5. Event record and data
test;
management; SDH /PDH Transmission
7. Optical power test;
6. Indicator simulation.
Analyzer
8. Voice monitoring.
1. BER test for PDH and SDH
STM-1; 1. Easy to use, 10.4” color LCD,
2. Anomaly / defect test;
touch screen, pen operation;
3. Pointer monitoring;
2. Support line rate up to 155Mbps;
4. APS / Service Disruption
3. Multi-task capability;
testing;
4. Clock interface;
5. Tributary scan;
5. Event record and data
SDH-1620L
6. Timing and synchronization
management;
SDH /PDH Transmission
test;
6. Indicator simulation.
Analyzer
7. Optical power test;
8. Voice monitoring.
Page 6 of 11
Antenas Chile Ltda.
1.3 PDH Testing
Products Functions Features
1. Dual E1 port
2. E1, 64K and V Series test 1. Color TFT-LCD;
3. Error performance analysis
2. Operation time 8 hours;
4. Error and alarm injection
3. On-line upgrading via RJ-45
5. IP PING Test
port;
6. Loop Delay Test
4. High capability storage: 1000
7. APS Test
items;
BER-1560
8. Audio Test
5. Remote control.
Data Transmission Analyzer
9. E1 in-service monitoring
10. E1 Pulse Mask Test
1. E1 and V Series test; 1. Small size and easy to carry;
2. Error performance analysis;
2. TFT true color
display, touch
3. Error and alarm injection;
screen operation;
4. IP PING Test;
3. Large capacity
Li-ion battery
5. Loop Delay Test;
more than 8 hours;
6. APS Test;
4. Expandable Data storage
BER-1530
7. Audio Test;
capacity, more than 5000
Data Transmission Analyzer
8. E1 in-service monitoring;
records.
9. E1 Pulse Mask Test.
1. Color TFT LCD with touch
1. Dual E1 ports, E1 screen;
monitoring; 2. Dual E1 testing;
2. V series interface test; 3. E1 synchronous clock input and
3. T1 test; output;
4. Pulse mask; 4. E1 clock jitter Rx/Tx testing;
5. V & F measurement; 5. E1 PING testing;
6. APS, round trip delay 6. Frame relay testing;
BER-1580
testing; 7. Perform the remote control set
7. Jitter measurement, Frame
through Ethernet;
Data Transmission Analyzer
relay testing;
8. Large capacity Li-ion battery
8. IP PING; guarantees 8 hours;
9. Remote control; 9. Operation;
10. Online upgrade. 10. Large capacity data storage,
10,000 records.
Page 7 of 11
Antenas Chile Ltda.
3. Network 3.1 Ethernet Testing
Products Functions Features
1. Suitable for telecom operators clients
verify bandwidth and fast
troubleshooting;
1、10/100/1000M Ethernet Test 2. Applicable to MSTP/MSAP network
Functions; opening and maintenance testing with
1)Link & Network all service interfaces;
2)Network Performance 3. One tester with multiple functions,
3)Network Tools provide integrated testing of E1, V
4)Network Analysis interface and Ethernet;
5)Cable & Port 4. A number of ways to verify channel
2、E1 Testing; bandwidth, support for symmetric and
1)PING asymmetric RFC2544 test;
2)Abnormal Defects Analysis 5. Original high-speed PING test function,
3)Loop Delay Testing can be arbitrary set PING rate, the
IAT-1710E Integrated Access
4)Switching Time Testing maximum rate support up to 1,000
3、V Series Interfaces Testing
Mbps, able to quickly locate the faults; Tester
( V.24/V.35 );
6. Optimization of the defensive design to
1)PING ensure the safety and solid of the
2)Abnormal Defects Analysis instrument;
3)Loop Delay Testing 7. The operating interface similar to
4)Switching Time Testing. smartphone, more simple to use;
8. New hardware platform and optimized
algorithm of the software make the
device run more smoothly.
9. Dual port 10/100/1,000M;
10. Simple and easy operation:
high-definition color touch screen and
1. BERT; graphical user interface;
2. Multiple Streams; 11. Provide comprehensive network
3. VLAN and MPLS; performance evaluation for the
4. Traffic Filters; deployment and maintenance of
5. Smart Loop; networks and services through traffic
6. RFC 2544; analysis, BER, and RFC2544, IPDV
GEA-8130A Ethernet Analyzer
7. Pass Through Mode; testing;
8. Cable and LAN test;
12. LAN tests: network discovery, diagnose,
9. POE. problem locating and many other
functions make you know your network
well and find network problems
instantly.
Page 8 of 11
Antenas Chile Ltda.
Products Functions Features
13. Support terminal, pass mode, loopback,
end to end mode;
14. Built-in large capacity battery.
1. Full rates loopback for
Layer 1 to 4;
2. Smart loopback as per
different layer Rx data; 1. Compact, Portable, smart and light;
3. Support Key and Remote
2. Easy to use, two keys to perform all the
Web as operation mode;
loopback operation;
4. Support RFC2544 test, BER
3. Compatible, end-to-end test with DADI
NTA-8710A Reflector
Test, QoS;
Ethernet Analyzer.
5. Support and respond Ping
test;
6. Support electrical and
optical port.
3.2 Cable Testing
Products Functions Features
1. Port identification:
telephone and network 1. Support 1000M RJ45 port auto identify
port; work mode ;
2. Cable length test; 2. Length measurement up to 457 m;
3. Wire map test; 3. Full cable tests with display of PASS,
4. Audio line-tracking; wire map, opens, shorts, miss wires,
TPT-8020A Cable Tester 5. Blink indicator; and split pairs, Compliance with
6. PING, DHCP; T568A/B.
7. Network scanning.
1. Convenient operation;
Audio line-tracking.
2. Widely used with TPT-8020A, and
other DADI product, DSL, Ethernet
tester.
TPT-8010A Tone Tracker
Page 9 of 11
Antenas Chile Ltda.
4. Copper Access 4.1 ADSL Testing
Products Functions Features
1. Easy to use, handheld design;
2. Power supply: Durable and large
capacity battery operating time
1. ADSL/ADSL2/ADSL2+ test ≥5 hours;
for network and physical 3. Diversify work modes can meet
layer test; every demanding;
2. DMM (Digital Multimeter) 4. Display bit per tone with figures
DA280 ADSL2+ Tester test. and numbers indications;
5. Qualified / unqualified wire
indication function, support
user-defined threshold.
4.2 ADSL/VDSL Testing
Products Functions Features
1. TFT color display, touch screen
operation;
1. ADSL/ADSL2/ADSL2+ test 2. Graphical interface, easy to
in Physical layer and operate;
3. Display bits per tone and SNR per
Network layer;
tone in graph and number;
2. DMM (Digital Multimeter)
4. Qualified / unqualified wire
test.
DSL-3011A xDSL Tester
indication function, support
user-defined threshold;
5. Tone generator function.
1. VDSL2 Module; 1. ADSL/ADSL/ADSL2+/VDSL2
2. VDSL2 Physical Layer Test; /VDSL2+ Test;
3. VDSL2 Network Layer Test; 2. Large LCD touch screen;
4. VDSL2 Application layer 3. Windows CE OS, graphical
test ( Net Scan, Net Rate interface, easy to handle;
DSL-3020V xDSL tester
test, FTP Speed test); 4. Net Scan, freely and easily;
5. Ethernet test
5. Cable qualifies indication;
6. Cable test. 6. Tone generator function.
Page 10 of 11
Antenas Chile Ltda.
5. Battery Analyzer
Products Functions Features
1. Test various types of car power
start batteries:6V,12V;
1. Battery internal resistance 2. A variety of testing modes:
test; support single test and
2. Battery voltage test; auto-timing real-time test;
3. Battery capacity test; 3. Support domestic and
4. Battery capacity types international standards:
selection test; domestic standard, American
5. Battery life test; standard and Japanese standard,
ISBA-5210A
6. Battery starting capability German standard, European
test;
standard and old European
Cranking Battery Analyzer
7. Battery charge system
standard;
test; 4. Built-in high-precision clock and
8. Battery charge ripple test. calendar, test data every time
automatically with testing time
records.
1. Automatically switch
within the test range
1μΩ--40Ω, and resistance
measurement resolution
reaches 1μΩ; 1. Tests various battery types such
2. Test all kind battery as 2V, 4V, 6V, 8V, 12V, 24V and
voltage under 48V, battery 48V;
voltage can be tested 2. 3.5’’ LCD screen;
automatically during 3. Built-in large capacity storage,
resistance measurement; 90,000 data can be stored;
3. Test result can be 4. Multiple network interfaces:
compared with the with RS232 port, TCP/IP port;
ISBA-5218A Battery Analyzer
comparator data directly, 5. Adapt wide temperature chip:
and it
supports
normally work under -10 to
permanently 200 types of 50℃.
battery comparator data;
4. Positive and negative
terminals temperature
testing.
Page 11 of 11