bobr dbsg08 double bass survival guide...prelude – optimized design for developing bassists....
TRANSCRIPT
-
BO
BR
-DBS
G08 #19954-BBCHAh
THE STAGE
www.tothestage.c
om
The place for mu
sicians to
experience the la
test artist
videos, discover t
he hottest
gear & giveaways,
learn from
the pros, and discuss
all things
music in the jou
rney from
student to the stage
!
THE LESSON RO
OM
www.thelessonroo
m.com
Visit the Lesson Ro
om—a place
where teachers and
students can
connect, interact,
and search
for tips, lessons, v
ideos, articles
and more.
Parts of the Instrument
Copyright © 2008 D’Addario & Company, Inc. All rights reserved. D’Addario, Prelude, and Helicore are trademarks ofD’Addario & Company, Inc. or its affiliates in the United States and/or other countries.
Double Bass
Survival Guideby David Gage
David Gage String Instruments
Scroll
TuningMachine
Strings
F-holes
Bridge
Peg Box
Nut
Fingerboard
Top (or front)
Sound post(insideinstrument)
Tailpiece
www.daddariobo
wed.com
Learn the details a
bout all the
innovative D’Addar
io products
available for your
instrument.
Also the top sourc
e for artist
information and eve
nts.
String RollerHole
BOBR_DBSG08_Double_Bass_Survival_Guide.qxp 9/24/2008 12:18 PM Page 1
-
Caring for your Instrument & Bow Installing & Tuning Strings Selecting the Proper String
Instrument care• When resting your instrument, lay it on its side with the bridge
facing the wall.• Maintain the instrument at minimum 40% humidity
by using a humidifier. Store the instrument in thecase to maximize the humidifier’s effect.
• Have your bass inspected at least once a year by a qualified technician. Repair any cracks as soon as possible.
• When traveling, always keep the bass on its back or side. Place foam or a pillow where the neck meets the body to keep the neck/scroll suspended. (See photo.)
• Always use a quality padded case with well stitched handles.
Bow Care & Rosin• Avoid handling the bow hair directly with your fingers.• Tighten the bow hair by turning the metal screw clockwise.• The bow hair should be tight enough so that it does not touch
the stick when played but still maintains a gentle curvetowards the hair.
• When not in use, loosen the bow until the hair touches the stick.
• Bow hair should be replaced at least once a year.
• Apply rosin by pulling the bow hair across the rosin cake 6 to 8 times using complete, long strokes.
• Store rosin in a cool dry place.
Preparation1) You will need replacement strings, a sharp pencil and a tuner.2) Loosen and replace one string at a time. Removing all of the strings
together could cause the sound post to shift or fall.
Remove the old string1) Lay the instrument carefully on its back.2) Loosen the string by moving the tuner handle
clockwise. A string winder can aid in this process.3) Pull the end of the string from the string roller hole
and remove the ball end from the tailpiece.
Install the new string1) Rub the tip of the pencil in the empty string grooves
of the nut and bridge.
2) Thread the string through the tailpiece, catchingthe ball in the narrow slot.
3) Insert the string through the stringroller leaving about 3" sticking out.Twist this 3" end once around thestring at the opposite side of the roller.
4) Using a winder, turn the handle counterclockwise to tighten the string. As you tighten, allow the string to cross over itself to prevent slippage. Do not pinch the string against the peg box wall.
5) Tune the new string up to full pitch before replacingthe next string.
Tuning tools• Electronic tuner – Best for beginners as it works
for each individual string.• A440 tuning fork – Good for advanced players
to tune the A string and then tune the rest ofthe strings by matching harmonics.
General notes about bass tuning:• Bass strings are usually tuned in fourths –
E, A, D, G (lowest to highest).• When tuning using the machine handle,
adjust slowly up to the proper note, listening to the pitch change while plucking the string.
• Be careful not to over tighten string above correct pitch as this can damage the strings.
• After playing for a few minutes, check and adjust the tuning.
Bass playing encompasses many styles, each with different performancerequirements. Bass strings are often crafted using a stranded steel corefor flexibility and response. Design variations create strings suitable to all styles of performance:
Helicore Orchestral – Designed for arco playing.Warm tone, exceptional bow response, and even balance. Excellent blend in ensemble settings.Available in fractional sizes.
Helicore Pizzicato – Crafted specifically for pizzicato technique. Brighter tone, maximum sustain, crisp attack and “growl” for plucking.
Helicore Hybrid – Ideal for a mix of both arco and pizzicato performance. Good bow response with excellent sustain and attack.
Helicore Solo – Designed for orchestral soloist,tuned to F#, B, E, A (lowest to highest). ‘Solo’ strings are appropriate when performing solo literature calling for this “scordatura” tuning.
Prelude – Optimized design for developing bassists.Clear, warm tone. An easily playable and economicalstring set for students. Available in fractional sizes.
String durabilityString deterioration occurs as a result of both normal use and corrosion. Any string’s tonewill naturally degrade over time and also may eventually break. Strings should be replacedregularly rather than waiting for them to break.
Apply rosin
StringWinder
Humidifier 1
2 3
4
Electronic Tuner and Tuning Fork
BOBR_DBSG08_Double_Bass_Survival_Guide.qxp 9/24/2008 12:21 PM Page 2