bofi kitchenmanual
TRANSCRIPT
KITCHEN TECHNICAL MANUAL
MARCH 2006
TECHNICALSPECIFICATIONS OF MATERIALSCARCASSES - PLINTHS - HINGES
1
PRESSWOOD CARCASSESWaterproof 19 mm panels made of wood-particles and treated with high basic weight, melamine resin. European Regulation Class E1 compliant. Finish: ivory or grey; rear border: melamine; front border: co-extruded plastic matter with dust protection gasket.Finish: graphite grey open-pore oak; rear and front border: melamine of the same colour. All presswood carcasses are equipped with a device for controlled closure(Blumotion), mounted on one or more hinges.
Under-sink base units are equipped with a printed aluminium sheet protecting against possible water infiltration. Customised under-sink baseunits are not equipped with pressed aluminium sheets. All bracket holes are equipped with metallic bushes of galvanised metal. For base unit carcasses with side panels h. 720 or 790 mm and wall units h. 720, 880 or 1.160 mm a continuous handrail of anodised aluminium is available.
BACK PANELSIvory and grey presswood: Varnished Medium Density (thickness 3.5 mm)Graphite grey oak presswood: Medium Density (thickness 3.5 mm); melamine finishing.
Carcasses of corner base units 1.000x1.000 and of tall units with sliding doors are delivered disassembled; back panels are finished according to the finish of the carcass - melamine-finished presswood and tinted multi-layer birch wood (thickness 8 mm).
SHELVESPresswood (ivory, grey or graphite grey oak). 19 mm presswood with same finish as carcass.
Upon request and additional payment all carcasses can be equipped with shelves made of 16 mm extruded aluminium.
Shelves for carcasses with sliding doors are made of chromium-plated wire.Low-voltage halogen lamps light up the inside of the tall unit when the door is opened. The bottom is made of pressed aluminium.Corner base units are equipped with revolving baskets of chromium-platedmetallic wire.
PLINTHSMade from extruded aluminium. Stainless steel treated with satin finish exclusive to Boffi. Height: 80, 120, 150 and 210 mm. (Adjustment h. 80 mm: -0/+10 mm h. 120/150/210 mm.: -5/+20 mm)Plinths come with a telescopic system that allows the user to adjust them both in height and in depth. In addition they are equipped with a gasketlocated between the plinth and the floor (registered decorative and functional Boffi patent).
HINGESThe hinges are made of 1.2 mm nickel-plated, pressed metal sheets. They are equipped with spring mechanisms for closing and opening and are adjustable in depth, height, and width. They allow for a 95° aperturewith built-in Blumotion and 165° aperture with Blumotion on the carcass. The hinge board is made of die-cast alloy and fixed on the side panel.
Carcass with dust protection gasket Shelf with bracket
Shelf in aluminium (upon request) Aluminium plinth
165° hinge Blumotion on the carcass: door with 165° hinges,door with aluminium + glass frames
95° hinge, built-in Blumotion
TECHNICALSPECIFICATIONS OF MATERIALSDRAWERS, HEAVY-DUTY DRAWERS AND IRONWARE
2
GLIDES FOR DRAWERS AND HEAVY-DUTY DRAWERSThe glides are made of galvanised steel and run on stabilised carriages. Total extraction. Capacity: 30 kg 1.200 mm drawers and tall units with pull-out doors have a capacity of 50 kg.
DRAWERS, HEAVY-DUTY DRAWERS AND INTERNAL DRAWERSMade of stainless steel. Totally extractable hollow side panels with optimal sliding mechanism. Drawers, heavy-duty drawers and internal drawers are all equipped with a controlled closure device (Blumotion). The bottom is made of a 16 mm. wood-particle panel treated with grey melamine resins. Rear panels are in metal. The bottom is equipped with a non-toxic, anti-slip mat. Heavy-duty drawers are equipped with side retention units made of metallic chromium-plated bars. Drawers and heavy-duty drawers can be equipped with special accessories (see list).Drawer width can be customised, depth cannot. Width adjustment is due to rear panel made of 16 mm melamine treated wood-particle panels.
INTERNAL DRAWERS DESIGNED BY BOFFIExtruded, coupled aluminium drawers. Equipped with corner release junctions. Bottom made of a 16 mm wood-particle panel treated with greymelamine resins and covered with a non-toxic mat. The internal drawer is compatible with all carcasses with hinge-mounted doors. The drawers are available in two different heights and can be used together with the 'Storage System' accessories designed by Boffi. Compatible with containers w. 300, 450, 600 and 900 mm. The drawer slides are concealed.
“STORAGE SYSTEM” ACCESSORIESSide and back panels are made of 8 mm wood-particle panels assembled using a 45° folding technique and are treated with an open-pore graphite grey oak melamine resin. Dividers are made of naturally extruded anodisedaluminium. The system includes various units with width compatible both with the internal and normal drawers. These accessories cannot be used in base units with wall-unit depth. Customised units are not available.
FEET FOR BASIC BASE UNITS AND TALL UNITSMade of galvanised, chromium-plated steel and nylon with optional heightadjustment. Feet base made of plastic resin, pressure-mounted onto the under-side of the unit.
SHELF BRACKETSMade of stainless steel. Equipped with a device that ensures a secure and precise fixing of the shelf.
WALL MOUNTING FOR WALL UNITS OR SUSPENDED BASESMade of reinforced polyamide resin.Internal regulating devices are made of galvanised chromium-plated steel. The fixing device is made of die-cast aluminium.
PLATE-RACK FOR WALL UNITSMade of polished stainless steel with removable drip tray; plastic holders for plates, saucers, cutlery and glasses.
IRONWAREMade of anti-oxidation treated nickel-plated metal.
ELECTRICAL APPLIANCESBoffi S.p.a. recommends a list of electrical appliance brands: AEG - ELECTROLUX - ELICA - GAGGENAU - MIELE - SCHOLTES - SIEMENS - WHIRLPOOL - ELICA hoods. All recommended brands are in compliance with EC standards, 220-230 V - 50 Hz voltage.Prices of finished units and doors for electric appliances placed under the worktop or doors for hoods include installation.Upon request Boffi produces carcasses with housing compatible with customers' electrical appliances.
BURNER ADJUSTMENTAll burners use methane gas. The use of different gases must be specified upon order.
Drawers- heavy-duty drawers
Internal drawers designed by Boffi
Stainless steel plate-rack for wall unit
Wall mounting for wall units
SETASIL - GOFFERED VARNISH1. Pre-treated Medium density panel.2.Base plaster.3. Trim in ABS plastic.4.Varnished with polyurethane paints with micro-spheres (Setasil).
STANDARD LAMINATE1. HPL rigid 0.9 mm thick laminate.2.Trim made of 1,2 mm aluminium profiles or ABS plastic, only white.3. Waterproof panels made of wood-particle panels - class 1.
TECHNICALSPECIFICATIONS OF MATERIALSDOORS AND FRONT PANELS - th. 23 mm
3
LAMINATE BOFFI 1. HPL rigid 0.9 mm thick laminate2.1 mm trim in wood or aluminium.3. Waterproof panels made of wood-particle panels - class 1.
MAT PLUS - MATT LACQUER1. Pre-treated Medium density panel.2.Base plaster.3. Trim in ABS plastic.4.“EPOFOND” varnish in colour.5.Finished with transparent “Soft Touch” varnish.
WOOD VENEER1. Made of waterproof wood-particle panels - class 1.2.0,6 mm wood veneer.3. 1 mm wood trim.Varnished with natural polyurethane base varnishes and finished withtransparent polyurethane varnishes. Standard essences: bleached oak, dark oak, graphite oak, reconstructed wood ebony-like, reconstructed Alpi Nero wood, reconstructed pinewood-like.
POLYESTER - POLISHED LACQUER1. Pre-treated Medium Density panels.2.Three layers of colour (320g/m2 each) on surfaces and edges. Smoothed, polished and shined
FRAMES - WOOD + GLASS1. 20 mm toulipier frame covered with a sheet of bleached oak or graphite grey oak and finished with transparent polyurethane varnishes.2. 4 mm tempered glass: frosted, pressed, white varnished, black varnished and silvered.
FRAMES - WOOD+WOOD1. 20 mm toulipier frame covered with a sheet of bleached oak or graphite grey oak.2. panel made of a 16 mm thick wood-particle panel with bleached oak or graphite grey oak veneer, finished with transparent polyurethane varnishes.
STAINLESS STEEL1. Pre-satinised, box-type-structured, 0.8 mm stainless steel.2.Panels of inert plastic matter.
NATURALLY ANODISED ALUMINIUM1. Aluminium panel.2.Support made of coupled aluminium.
TECHNICALSPECIFICATIONS OF MATERIALSDOORS AND FRONT PANELS - th. 23 mm
4
WHITE CORIAN®1. Surfaces and edges made of 3 mm panels in white Corian®2.Honeycomb board in Medium density.
FRAME ALUMINIUM + GLASS1. Frame in naturally anodised aluminium, WK6 type.2.4 mm tempered glass: frosted, pressed, white varnished, black varnished and silvered.3. Internal covering made of 0,9 mm laminate.To be used with wall and tall units.
FRAME ALUMINIUM+GLASS1. Frame in naturally anodised aluminium, Factory type.2.4 mm tempered glass: frosted, pressed, white varnished, black varnished and silvered.To be used with wall and tall units.
ALUMINIUM SHUTTER1. Frame of naturally anodised aluminium bars, Factory type with aluminium shutters.To be used with wall units H= 600 mm.
MOD. LT IN WOOD - Handle is recessed into the upper part of the door or frontal panel1. Toulipier solid frame covered with a sheet of wood with vertical grain on vertical solids and horizontal on horizontal solids.2.Made of veneer wood-particle panels.Handle width= door width - 120 mm (60+60 mm).Wood varnishing: standard.Wood essences: standard.
MOD. LT in setasil - mat plus - polyester - Uni wood Handle is recessed into the upper part of the door or frontal panel1. Panel in Medium Density.Boffi standard finishes.The inner part of the handle and the rear panel are polished varnished in the same finish of the door.Handle width = door width - 120 mm (60+60 mm).Wood veneer, without perimetrical solids for the Legno Uni (UNI wood) version.
MOD. CASE SYSTEM 2.3 - XILA 2.3 in: setasil - mat plus - polyester -wood - stainless steel - white Corian®- aluminiumFinishes and materials: standard Boffi.Pocket-handle in anodised aluminium, centrally positioned.
MOD. CASE SYSTEM 5.0 in: wood - white Corian®1. Panels in Medium Density, veneering with white Corian® or wood.2.Honeycomb board wood.Standard Boffi finish.
MOD. CASE SYSTEM 5.0 in: stainless steel 1. Pre-satinised, box-type-structured, 0.8 mm stainless steel.2.Panels of inert plastic matter.
TECHNICALSPECIFICATIONS OF MATERIALSHANDLES
5
SERIES AND DIMENSIONS STANDARD MATERIALPOSITIONING
147
15
14
antasp. 23 mm.
TRAVE WK6
GRAND CHEF
STEEL
FACTORY
LATINA
FRAMES
CASE SYSTEM 2.3XILA 2.3
WK6
B95
ZONE
horizontalR or L
horizontalR or L
verticalR or L
verticalR or L
horizontalR or L
horizontalcentred
horizontalcentred
horizontalcentred
horizontal or vertical R or L;on drawers is centred
The size and position of the handles are at the discretion of the designer. If they will be notspecified, the handle would be standard positioned. On hinged doors please attention to thehorizontal centred handles: on next base units they can interfere while opening. On the frontpanels of drawers, heavy-duty drawers, tall units with pull-out doors and dishwashers handlesmust always be horizontal and centred. In the LT model the handle is central positioned,recessed into the door or frontal and wide as the door/frontal (handle wide= door or frontal
panel wide -120 mm which is 60+60). This handle can be used with varnished or lacquered doors,wood, Corian® or aluminium doors. The Xila handle, recessed into the door or frontal panel, W. 120 mm. can be used too. Right or leftpositioned when mounted on hinged door, central on drawers-heavy-duty drawers-dishwashersand on tall units with single pull-out door. This handle can be used with varnished or lacquereddoors, wood, Corian® or aluminium doors.
Handle bar of extruded, naturally anodised aluminium.
Satinised stainless steel handle.
Handle of extruded aluminium, satinised stainless steel finish.
Handle of extruded, naturally anodised aluminium.
Handle of die-cast aluminium, satinised and protected with transparent varnishes.
Milled knob of aluminium-varnished brass.For use on all doors with aluminium +frosted/pressed/black or white glass frames.
Handle of die-cast aluminium, protected with transparent varnishes.
Aluminium varnished, pocket-handle in printed + Al + Mg alloy with thermoplastic gasket.To be used only with 20 mm. doors in setasil, mat plus, wood and polyester.
Printed Zn + Al + Mg alloy handle with aluminiumvarnish.
Stainless steel handle with pressure opening and return-spring.
TECHNICALSPECIFICATIONS OF MATERIALS
6
BOFFI LAMINATE (MAX. 4.000 X 1.300 mm)
003WHITE
140CREAM
145SAND
144DOVE-GREY
149GREY
148DARK GREY
STANDARD LAMINATE (MAX. 3000 X 1260 mm)
410WHITE
420BEIGE
421BLACK
435BRICK
440GREEN
460PEA-GREEN
455DARK GREEN
463YELLOW
464LIGHT YELLOW
479LIGHT GREY
801AZURE
813CREAM
868MINK
897BROWN
1804BLUE NIGHT
1812YELLOW OCHRE
823RED
835ORANGE
852DARK BLUE
859DARK AZURE
SETASIL - GOFFERED VARNISH
129MAGNOLIA
111POWDER
112COFFEE
063SAND
003WHITE
507SULPHUR YELLOW
81ALUMINIUM
116STUCCO WHITE
511BURGUNDY RED
104GRAPHITE GREY
313CHERRY
110ORANGE
106SAHARA
137IRON
509LIGHT GREY
508POWDER YELLOW
102MUSTARD YELLOW
505ULTRAMARINE BLUE
132SLATE BLUE
021BRICK RED
027BLACK
WOOD
041BLEACHED OAK
071DARK-DYED OAK
076GRAPHITE GREY OAK
071RECONSTRUCTEDWOOD EBONY-LIKE
RECONSTRUCTEDALPI NERO WOOD
RECONSTRUCTEDPINEWOOD-LIKE
TECHNICALSPECIFICATIONS OF MATERIALS
7
MAT PLUS - MATT LACQUER
003WHITE
129MAGNOLIA
009CREAM
002BLUE
010RED
137IRON
138SLATE
POLYESTER POLISHED LACQUER
002BLUE
001ANDALUSIAN RED
027BLACK
110ORANGE
003WHITE
129MAGNOLIA
106SAHARA
004GREY
STAINLESS STEEL
PRE-SATINISEDSTAINLESS STEELFOR DOORS
POLISHED STAINLESSSTEEL FOR TOPSAND BACK PANELS
CRS SCOTCH BRITESTAINLESS STEEL FOR TOPS AND BACKPANELS
ALUMINIUM
DOORS AND PANELS IN NATURALLYANODISEDALUMINIUM
GLASS
FROSTED PRESSED SILVERED BLACK -VARNISHED
WHITE -VARNISHED
ZODIAQ® - FOR TOPS AND BACK PANELS
SAND BEIGE CLAY BROWN CONCRETE GREY CHARCOAL BLACK GRAVEL GREY CHALK WHITE
LENGHT IN mmmax. min.
DEPTH IN mm
TECHNICALSPECIFICATIONS OF MATERIALSWORKTOPS
8
LAMINATE WITH WOOD EDGE1. 0,9 mm HPL coloured laminate.2.1 mm wood border.3. Panel made of 1st class waterproofed treatment wood-particles. Thickness: 30-40-60 mm
LAMINATE WITH ALUMINIUM EDGE1. 0,9 mm white colour-core laminate.2.Anodised aluminium edge.3. Panel made of 1st class waterproof wood-particles.Thickness: 40-60 mm.
WHITE COLOUR-CORE LAMINATE WITH STAINLESS STEEL EDGE1. 0,9 mm white colour-core laminate.2.Laminate plating.3. 1 mm stainless steel border.4.Panel made of 1st class waterproof wood-particles.5.110-190 mm. wood perimetrical support.Thickness: 40-60-110-190 mm.
WOOD VENEER1. 0,9 mm wood veneer.2. 1 mm wood border.Varnished with natural polyurethane base varnishes and finished with transparent polyurethane varnishes.Thickness: 20-40-60 mm.
STRIPWOOD, BLEACHED OAK (TEXWOOD)1. Solid stripwood.Varnished with natural polyurethane base varnishes and finished with transparent polyurethane varnishes.Thickness: 30 mm.
MULTI-LAYER NEW BLOCK WOOD (bleached oak, dark-dyed oak, graphite oak)1. Solid multi-layer wood Varnished with natural polyurethane base varnishes and finished with transparent polyurethane varnishes.Upon request: finish with natural oil.2. 60 mm wood perimetrical support.Thickness: 30-40-60 mm.
STAINLESS STEEL WITH WOOD EDGE1. 2 mm AISI 304 Scotch Brite stainless steel sheets.2.1 mm wood border.3. Panel made of 1st class waterproof wood-particles4.Laminate plating.For island and peninsula compositions with doublebevelled edges. Thickness: 40-60 mm.
SATINISED POLISHED STAINLESS STEEL1. 1 mm box-type-structured stainless steel sheets,AISI 3042. Panel made of 1st class waterproof wood-particles.3. 60-110-190 mm wood perimetrical support.Thickness: 20-30-40-60-110-190 mm.
350 - 630705 - 830900 - 980
350 - 630705 - 830900 - 980
350 - 630705 - 830900 - 980
350 - 630705 - 830900 - 9801260
350 - 630705 - 830900 - 980
350 - 630705 - 830900 - 980
350 - 630705 - 830900 - 9801260
350 - 630705 - 830900 - 980
1260(th. 110-190 excluded)
4.000 300
4.000 300
3.000 300
3.200 300
4.000 300
4.000 300
4.000 900
4.000 1.000
TECHNICALSPECIFICATIONS OF MATERIALSWORKTOPS
9
LENGHT IN mmmax. min.
DEPTH IN mm
STAINLESS STEEL DESIGN BOFFI - FACTORY1. 1 mm AISI 304 stainless steel sheets, basin effect -satinised polished finish2.Panel made of 1st class waterproof wood-particles.Thickness: 30-40 mm.
STAINLESS STEEL DESIGN BOFFI - GRAND CHEF1. 1 mm AISI 304 stainless steel sheets, double basin effect - satinised polished finish2. Panel made of 1st class waterproof wood-particles.Thickness: 110 mm.
STAINLESS STEEL DESIGN BOFFI - LATINA1. 1 mm AISI 304 stainless steel sheets, basin effect - satinised polished finish2.Panel made of 1st class waterproof wood-particles.Thickness: 60-110 mm.
C.R.S. SCOTCH BRITE STAINLESS STEEL1. 1 mm AISI 304 stainless steel sheets.2.Support made of 18 mm aluminium panels.3. Panel made of white melamine (th. 20-40 excluded)Thickness: 20-40-60-110-190 mm.
WHITE CORIAN®1. White Corian®2.Support made of 18 mm aluminium panels.3. Panel made of white melamine (th. 20-40 excluded).Thickness: 20-40-60-110-190 mm.
1. Marble, stone, granite, Zodiaq®.Marble, stone, granite: matt with anti-staintreatment, waterproof.Zodiaq®: matt finish.2. Support in EULITHEThickness: 20-40-60-80 mm.
1. Marble, stone, granite, Zodiaq®.Marble, stone, granite: matt with anti-stain treatment, waterproof.Zodiaq®: matt finish.2.Support in EULITHEThickness: 40-60-80 mm.
1. Marble, stone, granite, Zodiaq®.Marble, stone, granite: matt with anti-stain treatment, waterproof.2. Support in EULITHEThickness: 40-60-80 mm.
STONE: BIHARA-CARDOSO. MARBLE: CARRARA WHITE. GRANITE: BLACK ZIMBAWE. ZODIAQ®.
GRANITE: BLACK ZIMBAWE. ZODIAQ®.
630 - 830
630 - 830
350 - 630705 - 830900 - 9801.260
350 - 630705 - 830900 - 9801.260
350 - 630705 - 830
630 - 830
350 - 630705 - 830900 - 980( ) 1260( ) (th. 110-190 excluded)
350 - 630705 - 830900 - 9801.260
4.000 1.000
4.000 1.000
4.000 1.000
4.000 1.000
3.500 600
MarbleGranite2.700Stones2.400Zodiaq®3.000
600
600
600
MarbleGranite2.700Stones2.400Zodiaq®3.000
600
600
600
MarbleGranite2.700Stones2.400Zodiaq®3.000
600
600
600
TECHNICALSPECIFICATIONS OF MATERIALSWORKTOPS - COMPATIBLE SINKS AND HOB UNITS
10
BUILT-IN SINKSIn stainless steel, satinised polished finish,equipped with siphon.
TO BE USED WITH TOPS IN:LaminateWoodSatinised polished stainless steelWhite Corian®Zodiaq®Stone-marble-granite
Minimal top depth=630 mm
450
590
90505040
050
500
860
450505040
050
500
360
860
4503550 5050
400
5050
0
275
1160
450505040
050
500
660
1160
450355050
400
5050
0
275 350
860
4005035 35
5040
050
500
340
860
40040
5040
050
500
420
970
5005040 40
5040
050
500
340
970
51540
5040
050
500
415
340 150
100
100
300
1160
4005040
5040
050
500
340 330
440
400
500
5050
400500
50 50
340200
83050
340
200
830
50
50
340
275
830
40
30
200830
500
400500
50 330 15020
860
50
500
400
300
400
500
910
970
400
500
730
790
UNDER-MOUNTED SINKSIn stainless steel, satinised polishedfinish, equipped with siphon.
TO BE USED WITH TOPS IN:Stone - marble-granite - Zodiaq®
Minimal top depth = 630 mm
300
500
400
460
275 150
510
550
R= 125
500
400
460
450510
550
R= 145
395
415
335350
R= 80
340
r= 50
394
400
454
435500
r= 50
554
400
454
400
r= 50
454
400
454
340
r= 50
394
400
454
340
400
450
400
400
400
750
400
In the Boffi price list there are 29 typologies of KWC by Boffi mixers.
Drawn = sink on the left Mirrored = right
Drawn = big sink on the left Mirrored = right
Drawn = sink on the left Mirrored = right
Drawn = sink on the left Mirrored = right
Drawn = sink on the left Mirrored = right
Drawn = sink on the left Mirrored = right
Drawn = sink on the left Mirrored = right
Drawn = drain hole on the right Mirrored = left
Drawn = drain hole on the right Mirrored = left
TECHNICALSPECIFICATIONS OF MATERIALSWORKTOPS - COMPATIBLE SINKS AND HOB UNITS
11
FLUSH-MOUNTED SINKSIn stainless steel, satinised polishedfinish, equipped with siphon.
TO BE USED WITH TOPS IN:LaminateWoodWhite Corian®Zodiaq®Stone-marble-granite
Minimal top depth = 630 mm
FLUSH-MOUNTED SINKSIn CRS stainless steel, Scotch Britefinish, with basin sanded inside,equipped with siphon.
TO BE USED WITH TOPS IN:LaminateWoodWhite Corian®Zodiaq®Stone-marble-granite
Minimal top depth = 630 mm( ) Minimal top depth = 705 mm
575
505
593
488
988
49
8
768
498
1000
51
0
988
49
8
500
r= 50
554
400
454
400
r= 50
454
400
454
340
r= 50
394
400
454
45040 90 r= 10
580
400
==
480
45070
45040 90 r= 10
1100
400
==
480
34070
34040 90 r= 10
880
400
==
480
75040 90 r= 10
880
400
==
480
450 195 19540 r= 10
880
400
==
480
180
280
280
313∅
∅
Drawn = drain hole on the right / Mirrored = left
Drawn = drain hole on the right / Mirrored = left
Flush-mounted dustbin
950
580
950
580
1 2
790
580
530
580
400
540
480
400
100
980
480
400
400 100 400 400
770
850
480
400
100 270 40040
850
480
400
195 215
810
980
480
400
130 51040 40510
1180
580
510
80 51040 215
980
580
510
35
510 100 270
980
580
510
810 13040
980
580
510
In the Boffi price list there are 29 typologies of KWC by Boffi mixers.
TECHNICALSPECIFICATIONS OF MATERIALSWORKTOPS - COMPATIBLE SINKS AND HOB UNITS
12
FLUSH-MOUNTED INSETSIn stainless steel, satinised polishedfinish, equipped with siphon.
TO BE USED WITH TOPS IN:LaminateWoodWhite Corian®Zodiaq®( ) Stone-marble-granite
172020 20
1760
540
580
2020
b a
1
2
4
53
172020 20
1760
540
580
2020
b
a 1
2
4
53
a b
873
450 275353125,5 31 25,5
462
400
513
Drawn = sink on the leftMirrored = right
Drawn = sink on the leftMirrored = right Drawn = big sink on the left
Mirrored = right
WELDED SINKSIn stainless steel, satinised polishedfinish, equipped with siphon.
TO BE USED WITH TOPS IN:Stainless steel, satinised polishedfinish stainless steel, design Boffi:FactoryGrand chefLatina
Minimal top depth = 630 mm
563
45056,5 56,5
513
400
56,5
56,5
563
275 25 150
513
400
300
56,5
56,5
873
45056,5 366,5
513
400
56,5
56,5
873
45056,5 56,527535
513
400
56,5
56,5
1173
45056,5 275 356,535
513
400
56,5
56,5
822
400
462
400
34030
ÿ 420
3"
170
812
40021
3140
031
462
391
932
5005021 21
3140
031
462
340
932
51521 21
3140
031
462
375
340 150
==
300
1122
4005021 21
3140
031
462
340 290
50 350
290
500
400
800
500
400
290
350
400 40050
850
500
400 40050
850
500
Drawn = tap hole on the rightMirrored = left
Drawn = small sink on the right / Mirrored = left
Drawn = sink on the leftMirrored = right
Drawn = big sink on the leftMirrored = right
Drawn = big sink on the leftMirrored = right
Drawn = sink on the leftMirrored = right
Drawn = small sink on the right / Mirrored = left
Drawn = big sink on the left Mirrored = right
Drawn = sink on the leftMirrored = right
Drawn = big sink on the leftMirrored = right
bc
a
400
75
475
330 35 340
705
235
240
b a
400
100
500
340 35 400
775
400
462
910
932
400
462
730
752
340
400
400
400
450
400
450450960
60
400
340400800
60
400
750
400
ÿ 274
Drawn = big sink on the rightMirrored = left
Drawn = big sink on the rightMirrored = left
Drawn = drain hole on the right / Mirrored = left
Drawn = drain hole on the right / Mirrored = left
Drawn = drain hole on the right / Mirrored=left
Drawn = big sink on the leftMirrored = right
Drawn = big sink on the leftMirrored = right
In the Boffi price list there are 29 typologies of KWC by Boffi mixers.
TECHNICALSPECIFICATIONS OF MATERIALSWORKTOPS - COMPATIBLE SINKS AND HOB UNITS
13
WELDED SINKSIn CRS stainless steel, Scotch Britefinish, with basin sanded inside,equipped with siphon.
TO BE USED WITH TOPS IN:CRS stainless steel, Scotch Brite finish
Minimal top depth = 630 mm( )Minimal top depth = 705 mm
510
305
1
2
3
4
613
513
21
790
480
R= 10
21
790
380
60
500500
1050
5040
0
400
770
400
100 270
270
510
810
940
510
Drawn = drain hole on the right / Mirrored = left
In the Boffi price list there are 29 typologies of KWC by Boffi mixers. In the recommended electrical appliances price list there are gas and electrical hob units, built-in and flush-mounted, produced by: AEG - ELECTROLUX -GAGGENAU - MIELE - SCHOLTES - SIEMENS - WHIRLPOOL.
340
400
500
400
340500
890
50
400
Drawn = big sink on the leftMirrored = right
Drawn = drain hole on the right / Mirrored = left
Drawn = drain hole on the right / Mirrored = left
800
500
270
400
400
400
Drawn = drain hole on the right / Mirrored = left
810
400
400
770
400
205 165
900
400
400 100 400
510
510
510 100 270
510
510 510
1100
510
80
510 215205
930
510
873
513
1
2
4
53
321
1084
480
R= 10
4321
1377
480
R= 10
321
1084
380
60
4321
1377
380
60
FLUSH-MOUNTED HOB UNITSDesign BoffiStainless steel: satinised polishedfinish / grids in cast iron
TO BE USED WITH TOPS IN:LaminateWoodWhite Corian®Zodiaq®Stone-marble-granite
Minimal top depth = 630 mm
TECHNICALSPECIFICATIONS OF MATERIALSWORKTOPS - COMPATIBLE SINKS AND HOB UNITS
14
FLUSH-MOUNTED HOB UNITSDesign BoffiStainless steel: satinised polishedfinish / grids in cast iron
TO BE USED WITH TOPS IN:LaminateWoodWhite Corian®Zodiaq®Stone-marble-granite
Minimal top depth = 630 mm( ) Minimal top depth = 705 mm
950
580
1 3
4 5
2
1
23
45
1090
580
1
2
4
5
3
1090
5801
2
3
4
613
513
3
4
5
6
1 2
1280
580
1 2
670
480
1 2 3 4
1180
480
1 2 3
1180
480
WELDED HOB UNITSDesign BoffiStainless steel: satinised polishedfinish / grids in cast iron
TO BE USED WITH TOPS IN:Satinised polished stainless steelStainless steel, design Boffi: FactoryGrand ChefLatina
Minimal top depth=630 mm( ) Minimal top depth=830 mm
(•) Top thickness=110-190 mm( ) Grand Chef top
592
1
2
3
4 462
8484
630
822
1
2
4
53
462
8484
630
822
1
2
4
53 462
8484
630
21
700
400
8414
6
630
321
1000
400
8414
6
630
4321
1300
400
8414
6
630
4
3
1
2
800
600
8414
6
830
6
5
4
3
1
2
1100
600
8414
6
830
•
21
600
400
84146
630
321
900
400
84146
630
• •
4321
1200
400
8414
6
630
4
3
1
2
700
600
8414
6
830
6
5
4
3
1
2
1000
600
8414
6
830
•• •
3
4
1
2
540
630
456
8787
110
190
825
630
456
8787
110
190
3
1
2
4
5
502
630
456
8787
110
190
1
2
3
4
732
630
456
8787
110
190
1
2
4
53
732
630
456
8787
110
190
1
2
4
53
In the Boffi price list there are 29 typologies of KWC by Boffi mixers. In the recommended electrical appliances price list there are gas and electrical hob units, built-in and flush-mounted, produced by: AEG - ELECTROLUX -GAGGENAU - MIELE - SCHOLTES - SIEMENS - WHIRLPOOL.
TECHNICALSPECIFICATIONS OF MATERIALSWORKTOPS - COMPATIBLE SINKS AND HOB UNITS
15
WELDED HOB UNITSDesign BoffiCRS stainless steel, grids in cast iron
TO BE USED WITH TOPS IN:CRS stainless steel, Scotch Brite finish
Minimal top depth = 630 mm(•) Top thickness = 110-190 mm
270
510
6060
630
1
270
1
2
510
6060
630
270
1
2
510
6060
630
540 125
1
2
3
4
510
6060
630
1
2
4
5
3
810 125
510
6060
630
3
4
5
6
1 2
1080 125
510
6060
630
770
510
6060
630
1 3
4 5
2
560
1
23
4
495
67,5
67,5
630
110
190
270
110
190
1
510
6060
630
270
1
2
110
190
510
6060
630
270
1
2
110
190
510
6060
630
540
1
2
3
4
110
190
510
6060
630
1080
3
4
5
6
1 2
110
190
510
6060
630
810
1
2
4
5
3
110
190
510
6060
630
1 2
540 125
63
0
19
52
70
10
56
0
1 2 3
1080 125
63
0
19
52
70
10
56
0
1 2 3 4
1080 125
63
0
19
52
70
10
56
0
• • •
• • •
In the Boffi price list there are 29 typologies of KWC by Boffi mixers. In the recommended electrical appliances price list there are gas and electrical hob units, built-in and flush-mounted, produced by: AEG - ELECTROLUX -GAGGENAU - MIELE - SCHOLTES - SIEMENS - WHIRLPOOL.
DIAGRAM FOR TOP DEPTH
TECHNICALSPECIFICATIONS OF MATERIALSELECTRICAL APPLIANCES, DESIGN BOFFI - HOODS
16
UNI 600 mm externally vented/re-circulated hood,480/650 mm deep in stainless steel.
Technical features:Voltage 220 V/240, 50 Hz. (110 V - 60 Hz) - Maximumcapacity 750 m3/h - 3 speeds - 2 grease filters inanodised aluminium 234x318 (dishwasher washable)Absorbed power 200 W - Outlet diameter 150 mmwith safety valve+outlet reducer 150/120 - 2 x 20 W halogen spot-lights.
UNI 900 mm externally vented/re-circulated hood,480/650 mm deep in Scotch Brite stainless steel.
Technical features:Voltage 220 V/240, 50 Hz (110 V - 60 Hz) - Maximumcapacity 750 m3/h - 3 speeds - 2 grease filters inanodised aluminium 234x318 (dishwasher washable)Absorbed power 200 W - Outlet diameter 150 mmwith safety valve+outlet reducer 150/120 - 2 x 20 W halogen spot-lights.
UNI 1200 mm externally vented/re-circulated hood,480/650 mm deep in stainless steel.
Technical features:Voltage 220 V/240, 50 Hz (110 V - 60 Hz) - Maximumcapacity 750 m3/h for W = 1.200/1.800 mm - 3 speeds2 grease filters in anodised aluminium 234x318(dishwasher washable) for W. 1.200 hood - 5 greasefilters in anodised aluminium 234x318 (dishwasherwashable) for W. 1.800 hood - Absorbed power 200W for W = 1.200/1.800 mm - Outlet diameter 150 mmwith safety valve+outlet reducer 150/120 - 2 x 20 W halogen spot-lights for W = 1.200 mm3 x 20 W halogen spot-lights for W = 1.800 mm
340
600140
480650
L
a
c
b
d
a. Activated carbon filter for re-circulating versionb. Control panelc. Grease filters made of anodised aluminiumd. Halogen spot-lights
600 mm externally vented/re-circulated stainlesssteel concealed hood, H 600 mm, with flap door.900 mm externally vented/re-circulated stainlesssteel concealed hood, H 600 mm, with flap door.1.200 mm externally vented/re-circulated stainlesssteel concealed hood, H 600 mm, with flap door.
Technical features:Voltage 220 V/240, 50 Hz (110 V - 60 Hz) - Maximumcapacity 600 m3/h - 3 speeds - 3 grease filters inanodised aluminium (dishwasher washable) for W 900 hood - 4 grease filters in anodisedaluminium (dishwasher washable) for W. 1.200 hood.Absorbed power 300 W for W=900 mmAbsorbed power 400 W for W=1.200 mmOutlet diameter 150 mm with safety valve+outletreducer 120 - 2 x 50 W halogen spot-lightsThe 110V-60 Hz hoods are in compliance with UL-USA
WORKS 900 mm externally vented/re-circulatedwall-mounted hood, in stainless steel+glass, 600 mmdeep, with remote control, 4 aluminium grease filters.Stainless steel + glass / Stainless steel
WORKS 1.200 mm externally vented/re-circulatedwall-mounted hood, in stainless steel+glass, 600 mmdeep, with remote control, 6 aluminium grease filters.Stainless steel + glass / Stainless steel
WORKS 1.800 mm. externally vented/re-circulatedwall-mounted hood, in stainless steel+glass, 600 mm deep, with remote control, 10 aluminiumgrease filters.Stainless steel + glass / Stainless steel
Technical features:Voltage 220 V/240, 50 Hz (110 V - 60 Hz) - Maximumcapacity 600 m3/h - 4 speeds - 4 grease filters inanodised aluminium 250x300 (dishwasher washable)for W 900 hood - 6 grease filters in anodisedaluminium 250x300 (dishwasher washable) for W 1.200 hood - 12 grease filters in anodisedaluminium 250 x 300 (dishwasher washable) for W 1.800 hood - Filter saturation indicator (100 hours), with RESET button - Power 240 W -Absorbed power 400 W for W = 1.200 mm - Outlet diameter 150 mm with safety valve - 3 x 20 Whalogen spot-lights
600 / 900 / 1200
= =
ÿ 150
95
342
320
590
600
900/1200/1800
100
500
100
300
100
600
a
bc
d
In the Boffi recommended electrical appliances price list there are other hoods produced by Elica.
WORKS 1.200 mm externally vented island hood, in stainless steel+glass, 700 mm deep, with remotecontrol, 6 aluminium grease filters.Stainless steel + glass / Stainless steel
WORKS 1.800 mm externally vented island hood, in stainless steel+glass, 700 mm deep, with remotecontrol, 12 aluminium grease filters.Stainless steel + glass / Stainless steel
1200/1800
100
300
100
700
a
bc
d
a. Modular filters made of anodised aluminium b. Control panelc. Halogen spot-lightsd. Activated carbon filter for re-circulated version
TECHNICALSPECIFICATIONS OF MATERIALSELECTRICAL APPLIANCES, DESIGN BOFFI - HOODS
17
Stainless steel, externally vented/re-circulated, wall-mounted version “Flat-Kap” hood. W 900 mm - Without chimney, variable height(chimney to be ordered separately).
Stainless steel, externally vented/re-circulated, wall-mounted version “Flat-Kap” hood. W 1.200 mm - Without chimney, variable height(chimney to be ordered separately).
Technical features:Voltage 220 V/240, 50 Hz (110 V - 60 Hz) - Maximumcapacity 1.000 m3/h - 6 speeds - 1 grease filter in anodised aluminium (dishwasher washable).Filter saturation indicator - Outlet diameter 150 mmwith safety valve - 2 x 20 W halogen spot-lights.
800 - 1100
900 - 1200
500
600
H
16
33
540357= =
20
20
Stainless steel, externally vented/re-circulated,island version “Flat-Kap” hood - W 900 mm Without chimney, variable height (chimney to be ordered separately).
Stainless steel, externally vented/re-circulated,island version “Flat-Kap” hood - W 1.200 mm Without chimney, variable height (chimney to be ordered separately). 800 - 1100
900 - 1200
500
700
H
16
33
540= =
387= =
20
20
Stainless steel externally vented/re-circulatedgroup “Flat-Kap” W 800 mm, to match always with wall-fixed “FLAT” sail.Without chimney, variable height (chimney to be ordered separately).
Stainless steel externally vented/re-circulatedgroup “Flat-Kap” W 1.100 mm, to match always with wall-fixed “FLAT” sail.Without chimney, variable height (chimney to be ordered separately).
Technical features:Voltage 220 V/240, 50 Hz (110 V - 60 Hz) - Maximumcapacity 1.000 m3/h - 6 speeds - 1 grease filter in anodised aluminium (dishwasher washable) -Filter saturation indicator - Outlet diameter 150 mmwith safety valve - 2 x 20 W halogen spot-lights.
The 110V-60 Hz hoods are in compliance with UL-USA 800 - 1100 500
H
33
540357= =
20
20
In the Boffi recommended electrical appliances price list there are other hoods produced by Elica.
800 - 1100 500
H
33
540= =
387= =
20
20
Stainless steel externally vented/re-circulatedgroup “Flat-Kap” W 800 mm, to match always with island “FLAT” sail.Without chimney, variable height (chimney to be ordered separately).
Stainless steel externally vented/re-circulatedgroup “Flat-Kap” W 1.100 mm, to match always with island “FLAT” sail.Without chimney, variable height (chimney to be ordered separately).
TECHNICALSPECIFICATIONS OF MATERIALSELECTRICAL APPLIANCES, DESIGN BOFFI - HOODS
18
Stainless steel wall-fixed sail “Flat”, equipped with wall fixing pins.Fixed price W from 1.000 mm to 1.500 mmFixed price W from 1.501 mm to 3.000 mmFixed price W from 3.001 mm to 4.000 mm
1200 ˜ 4000L
600
16
2020
Stainless steel island sail “Flat”, equipped with wall fixing pins.Fixed price W from 1.000 mm to 1.500 mmFixed price W from 1.501 mm to 3.000 mmFixed price W from 3.001 mm to 4.000 mm
1200 ˜ 4000L
700
16
H
2020
Ceiling externally vented/re-circulated hood in stainless steel.Design Boffi, with remote control.W 1.200 mm, wall-mounted version, depth 550 mm, H = from 600 to 1.200 mmW 1.800 mm, wall-mounted version, depth 550 mm, H= from 600 to 1.200 mm
Technical features:Voltage 220 V-50Hz - 110 V-60 Hz - Max Capacity 1000 m3/h - Exhaust outlet diameter 150 mm with safe valve - 3 speeds + turbo - W 1.200 = 2halogen spot-lights 20 W - W 1.800 = 4 halogen spot-lights 20 W - W 1.200 = 4 grease stainless steel filters,dishwasher washable, island version - W 1.800 = 6grease stainless steel filters, dishwasher washable,island version - W 1.200 = 4 grease stainless steelfilters, dishwasher washable, wall-mounted version.W 1.800 = 6 grease stainless steel filters, dishwasherwashable, wall-mounted version.Electronic control panel, remote control.Ø 150 mm flexible aluminium tube, extensible to W= 1.500 mm
Please use frontal, lateral, back 16 mm coveringpanels (H max. 1.200 mm) in: white glass, blackglass, white Corian®, stainless steel or mirror.
==
==
1200 / 1800
ÿ 150
700
H
A
A
AABB
B
B
W 1.200 mm, island version, depth 550 mm, H= from 600 to 1200 mm.W 1.800 mm, island version, depth 550 mm, H= from 600 to 1.200 mm.
==
==
1200 / 1800
ÿ 150
550
H
A
ABB
B
B
In the Boffi recommended electrical appliances price list there are other hoods produced by Elica.
TECHNICAL SPECIFICATIONS OF MATERIALSELECTRICAL APPLIANCES, DESIGN BOFFI - FREE-STANDING REFRIGERATORS-FREEZERS
19
American fridge-freezer, free-standing, entirely covered in stainless steel, top cover in stainless steel, aluminium handle mod. STEEL, stainless steel finish.Design CRS Boffi, total capacity 619 lt (fridge 441 lt-freezer 178 lt)replaceable tempered glass shelves, 3 drawers with moisture control, eggs and butter containers, inside light, silent automatic moisture control, reversible doors, large thermal insulation.Voltage: 230 V, 50 Hz.Noisiness: 46 dBFreezing capacity: 10 kg/24 h.Annual power consumption: 577 kWh/yearPower-efficiency class: Amod. MB2227PEHW
830
min. 500
1570
828788710
1800
610
1047
3011
0
American fridge-freezer, free-standing, entirely covered in stainless steel, aluminium handle mod. STEEL, stainless steel finish.Total capacity: 475 lt (339 lt fridge + 136 lt freezer), anti-corrosive sheets, replaceable shelves, 2 crispers with moisture control, reversible doors.Voltage: 220-240 V, 50 Hz.Noisiness: 48 dBFreezing capacity: 5,13 kg/24 h.Annual power consumption: 642 kWh/yearPower-efficiency class: Amod. GT1727PVC
702
78
0
14
00
732
667
17
15
10
57
53
72
59
6
American fridge-freezer, free-standing, entirely covered in stainless steel, top cover in stainless steel, aluminium handle mod. STEEL, stainless steel finish, Boffi CRS Design , total capacity 619+619 lt, replaceable temperedglass shelves, 3 drawers with moisture control, eggs and butter containers, inside light, silent automatic moisture control, reversible doors, large thermal insulation.Voltage: 230 V, 50 Hz.Noisiness: 46 dBFreezing capacity: 10 kg/24 h. Annual power consumption: 577 kWh/yearPower-efficiency class: Amod. MB2227PEHW
1684
min. 500
1570
828788710
1800
610
1047
3011
0
In the Boffi price list there are built-in and under-mounted refrigerators-freezers, produced by: AEG - ELECTROLUX -GAGGENAU - MIELE - SCHOLTES - SIEMENS - WHIRLPOOL.
TECHNICALSPECIFICATIONS OF MATERIALSELECTRICAL APPLIANCES, DESIGN BOFFI - FREE-STANDING REFRIGERATORS-FREEZERS
20
American fridge-freezer, free-standing, entirely covered in stainlesssteel, aluminium handle mod. STEEL, stainless steel finish.Fridge:capacity 412 lt with 3 replaceable tempered glass shelves, 3 drawerswith moisture control, 3 lights, on wheels (2 fixed + 2 swinging),adjustable feet, wine bottle-holder, cheese/milk containers withtransparent door, pull-out eggs-holder, tall bottles holder. No-frost, silent.Freezer:capacity 229 lt 3 replaceable glass shelves,2 metal wire baskets.2 ice buckets, 1 light, 5 door-fixed boxes.Voltage: 230 V, 50 HzNoisiness: 47 dBFreezing capacity: 14 kg/24 hTotal capacity 641 ltAnnual power consumption: 757 kWh/yearPower-efficiency class: Bmod. GC23B27-PED
Fridge-freezer with ICE MAKER and DISPENSER, free-standing, entirely covered in stainless steel, aluminium handle mod. STEEL, stainless steel finish.Fridge:capacity 418 lt, 3 replaceable glass shelves, 3 drawers with moisture control, 3 lights on wheels (2 fixed + 2 swinging),adjustable feet, wine bottle-holder, cheese/milk containers with transparent door, pull-out eggs-holder, tall bottles holder. No-frost, silent.Freezer:capacity 211 lt., 3 replaceable glass shelves, 2 metal wire baskets,2 ice buckets, 1 light, 3 door-fixed boxes.Voltage: 230 V, 50 HzNoisiness: 47 dBFreezing capacity: 14 kg/24 hTotal capacity 629 ltAnnual power consumption: 768 kWh/yearPower-efficiency class: Bmod. GC5B227-DED
912
min. 450
11
70
740
620
17
85
16
80
25
80
912
min. 450
11
70
740
620
17
85
17
60
25
80
In the Boffi price list there are built-in and under-mounted refrigerators-freezers, produced by: AEG - ELECTROLUX -GAGGENAU - MIELE - SCHOLTES - SIEMENS - WHIRLPOOL.
21BASE UNITS H = 660 - plinth 210 mmH = 720 - plinth 120/150 mmH = 790 - plinth 80 mm
w/shelves w/1 drawer w/3 drawers w/4 drawers w/2 heavy-duty drawers
w/heavy-duty drawer+open-faced wood compartment pan-holders
bread-holders pan-holders bottle-tin holders
dustbin-holders external corner internal corner linear corner
linear corner under hob-unit: w/shelfw/frontal panel w/1 drawer+1 heavy-duty drawer w/4 drawers w/2 drawers+1 heavy-duty drawer
under sink: w/2 heavy-duty drawers under-sink unit: w/doors w/dustbin f/differentiated waste-disposal
under sink: w/2 heavy-duty drawers linear corner internal corner for oven with castors or chromium-plated feet in steel or wood: w/drawers
with castors or chromium-plated feet in steel or wood
( ) base units 345 mm deep
with aluminium hand-rail - side panel Typ X1
w/dustbin for oven door for dishwasher for fridges-washing machines
22TALL UNITS Tall units: H = 1.900 - plinth 120/150 mmH = 2.000 - plinth 210 mmH = 2.060 - plinth 120/150 mmH = 2.130 - plinth 80 mmH = 2.340 - plinth 80/120/150 mm
Complementary tall units: H = 1.180 mmH = 1.340 mmH = 1.550 mmH = 1.620 mm
linear corner w/shelveswith shelves with shelves- single pull-out door storage system with inside drawers with basketsinternal corner w/shelves with baskets
with shelves- Factory door frame+glass with WK6 door frame+glass sliding doors w/shelves corner with shelves sliding doors w/shelves - Factory door frame+glass
COMPLEMENTARY TALL UNITS: with shelves storage system for oven
tall unit: broom cupboard
storage system with 2 doors
storage system withsingle door ( ) tall units 345 mm deep.
TALL UNITS
23
MADIA TALL UNIT
TALL UNIT
with drawerswith shelves for oven for refrigerator
for oven
TALL UNITS
for oven for double oven for fridge/freezer upper tall unit element for big fridge upper tall unit element
with aluminium shutter: in stainless steel or wood
UPPER TALL UNIT ELEMENT
with shelves in chromium-plated wire.Depth: 480 mm
electrified unit for small el. appliances.Depth: 480 mm
with shelves in chromium-plated wire.Depth: 623 mm
electrified unit for small el. appliances.Depth: 623 mm
for microwave ovens and coffeemachine.Depth: 623 mm
( ) tall units 345 mm deep too.
Tall units: H = 1.900 - plinth 120/150 mmH = 2.000 - plinth 210 mmH = 2.060 - plinth 120/150 mmH = 2.130 - plinth 80 mmH = 2.340 - plinth 80/120/150 mm
Madia tall units: H2 = 1.400 - plinth 210 mmH2 = 1.460 - plinth 210/150 mmH2 = 1.530 - plinth 80 mm
Upper tall unit element: H = 1.280 mmH = 1.300 mm
doors for big fridge panels for big fridge
TALL UNIT
24WALL UNITS
with 1 shelf (available for upper-wall unit version too) corner stainless steel plate-rack corner plate-rack
shelving systemwith 1 shelf corner stainless steel plate-rack corner plate-rack corner shelving system
external upper-hood unit for totally concealed hood for built-in hood open-faced compartment in wood wood w/shutter WK6 door frame+glass: flap door WK6 door frame+glass: hinged door
Factory door frame+glass: flap door Factory door frame+glass: hinged door Alu door with shutters: flap door frontal panel for external hoods doors for concealed hoods
corner stainless steel plate-rack corner plate-rack shelving systemwith 1 shelf
with 2 shelves corner shelving system
without handlefor concealed hoodexternal upper-hood unit
with hand-rail, wall unitsH = 440-600 mm excluded
with 3 shelves corner stainless steel plate-rack corner plate-rack
25CASE SYSTEM 2.3
base units depth 574/674 mmwith shelves under-sink unit
under-top supporting frame in aluminiumprofiles used as hand-rail w/2 internal drawers w/2 drawers+1 heavy-duty drawer
w/2 heavy-duty drawers+ 1 internal drawer
end-of-composition side panel for topsd. 1260/1030 mm in island positions
base units: w/2 heavy-duty drawers under-sink base unit + waste-disposal
under-sink base unit w/1 heavy-duty drawer w/waste-disposal for oven for dishwasher
end-of-composition side panel for tops d. 05 mm
rear panel for topsd. 705 mm
grid plinth in aluminium
door:under-mountedfridge dishwasher
base unit:corner w/shelves corner with
chromium-plated
suspended base units:w/2 heavy-duty drawers w/1 heavy-duty drawer
under-sink base unit w/flap door with shelf
end-of-composition side panelfor suspended base unit
For Case System 2.3 it is obligatory to use end-of-composition side panels Th.22 in base and tall units.Standard wall units: without handles.The under-mounted supporting frame in aluminium profiles is a single piece (sum of base unit widths).
Tall units: H = 2.130 - plinth 50 mmH = 2.340 - plinth 50 mmD = 625 mm
( ) base unit depth 345 mm (wall unit depth).
panel
island bifrontal unit peninsula unit with heavy-duty drawer - wood or aluminium
tall units: with shelves for oven for oven w/heavy-duty drawers for double oven for refrigeratorend-of-compositionside panel
(23 mm doors and frontal panels). Finishes: setasil - matplus - wood - polyester - stainless steel - white Corian® - aluminium.
supporting beams
26CASE SYSTEM 5.0 (50 mm doors and frontal panels). Finishes: wood -stainless steel - white Corian®
base units depth 574/674 mm.w/2 internal drawers w/2 drawers+1 heavy-duty drawer w/2 heavy-duty drawers
+ 1 internal drawer w/2 heavy-duty drawers Under-sink base unit
+ waste-disposal
1. under-top supporting frame in aluminium profiles used as hand-rail2.aluminium grid plinth
base units: under-sink base unit w/1 heavy-dutydrawer w/waste-disposal
corner with chromium-platedbasket for oven w/dishwasher
doors: under-mountedfridge
doors: dishwasher
end-of-composition side panel:for tops d. 705 mm
end-of-composition side panel for base:island version, for tops d. 1.260 mm
rear panels: island version, for topsd. 705 mm
tall unit modules:storage storage oven+ oven+unit unit dish- dish- storage w/fridge w/freezer w/wine
washer washer unit fridge
end-of-composition sidepanel for tall unit modules
rear panel for islandtall unit covering panel for 2 modules covering panel for 3 modules covering panel for 4 modules
For Case System 5.0 it is obligatory to use finished end-of-composition side panels th. 92 in base and tall units.The tall unit modules are proposed with 2/3/4 modules, covered by 10 mm finished covering panel.The under-mounted supporting frame in aluminium profiles is a single piece (sum of base unit widths).
27WORKTOPSFOR CASE SYSTEM 2.3 AND 5.0
Finishes: CRS stainless steel - white Corian®
The tops 705 mm deep are available for wall-mounted and island solutions.Please use 23 mm rear panels in island solutions.The tops 1.260 mm deep are available for island solutions with opposing base units.In Case System 2.3 is possible to have standard base units in island solution + base units with same depth of wall unit and 1.030 mm deep top.
Top 1.030 mm deep is available for Case System 2.3
a. 1 mm. AISI 304 stainless steel sheets, Scotch Brite finishb. wood perimetrical framec. support made of coupled aluminium panels
a. white Corian®b. support made of coupled aluminium panels
C.R.S. SCOTCH BRITE STAINLESS STEEL TOPS D= 705-1.260 mm Max L. 4.000 mmWelded sinks and hob units in CRS stainless steel.
WHITE CORIAN® TOPSD= 705-1260 mmMax L. 3.500 mmFlush-mounted sinks and hob units.
28Finishes: setasil - matplus - wood - polyester - stainlesssteel - white Corian® - aluminium
H= 720 - plinth 120/150 mmH= 790 - plinth 80 mm
XILA 2.3 BASE UNITS
w/shelves w/2 drawers + 1 heavy-duty drawer w/2 heavy-duty drawersbread-holder pan-holder w/2 internal drawers
bottle-holder dustbin-holder linear corner:w/shelves w/baskets w/magic corner under-hob unit: w/shelf
w/frontalpanel w/2 heavy-duty drawers
under-hob unit: w/2 drawers + heavy-duty drawer under-sink: with aluminium bottomw/wastedisposal w/differentiated waste-disposal
under-sink: for differentiated waste-disposal
w/2 heavy-duty drawers(moulded on the upper part) linear corner for oven
( ) base unit depth 345 mm
end-of-composition side panel
door: dishwasherfridge/washingmachine rear panel
For Xila 2.3 it is obligatory to use end-of-composition side panels Th.20 in base units, side panel or total height.Standard wall units: without handles.The under-mounted supporting frame in aluminiumprofiles is a single piece (sum of base unit widths).
XILA 2.3 TALL UNITS
Finishes: setasil - matplus - wood - polyester - stainless steel -white Corian® - aluminium
Tall units: H = 1.900 - plinth 120/150 mmH = 2.060 - plinth 120/150 mmH = 2.130 - plinth 80 mmH = 2.340 - plinth 80 mm
Coplanar tall units: H1= 1.180 mm.H1= 1.340 mm.H1= 1.550 mm.H1= 1.520 mm.
Madia tall units: H2 = 1.460 - plinth 120/150 mmH2 = 1.530 - plinth 80 mm
tall unit: w/shelves w/shelves and single door linear corner w/shelves tall unit: broom cupboard
60019 19 600 19
2535
600 19 600 201920
625
Tall units of XILA 2.3 model have the “L”-typehandles, recessed vertically in the doorthickness. The handles of drawers arerecessed horizontally in the drawerthickness, centrally positioned.The door opening is allowed thanks to a 19mm spacer with frontal profile in naturally anodised aluminium. The composition of tall units has always tohave finished end-of-composition panels.
Diagram for using spacers between tall units and tall unit and end-of-composition
f/double oven f/refrigerator
madia tall unit:f/oven w/shelves
( ) tall units depth 345 mm. Please use standard tall units for big refrigerators and upper tall unit elements.
H= 1.900H= 2.060
H= 2.020H= 2.050H= 2.180H= 2.210
H= 2.130H= 2.340
H= 2.210H= 2.420H= 2.460H= 2.490
end-of-composition panels
complementary tall unit: f/oven w/shelves
29
tall unit: f/oven
madia tall unit:f/oven
oven
storage unit w/internal drawers
w/chromium-platedbaskets
DIAGRAMSBASE AND WALL UNIT DIMENSIONS
30
16 22
600
27
43
625
600
560
514
54057
3
2370
2
98
11241078
68
02
02
0
72
015
0/12
0
87
0 /
84
0
71
615
0/12
0
22
2370
2
98
11241078
600
560 520
500
54057
3
68
02
02
0
72
015
0/12
0
87
0 /
84
0
43
215
0/12
01
40
22
22
14
0
500
Base unit withaluminium hand-rail.Squared-edge door(side panel code X)
Base unit(side panel code N)
Base unit with drawers(side panel code N)
16 23
320
27
43
23320
345
h -
40
h
20
20
320 23
2
16 301
290
3
(h -
4)
mm
.
22
Wall unit with hand-rail(side panel code X)Squared-edge door
Wall unit without handle(side panel code N)
Wall units(side panel code N)
h. cm 44 n° 1 shelf 2 hingesh. cm 60 n° 1 shelf 2 hingesh. cm 72 n° 1 shelf 2 hingesh. cm 88 n° 2 shelves 2 hingesh. cm 116 n° 3 shelves 3 hinges
All doors are 23 mm thick, excepted the 20mm WK6 door with pocket-handle.
DIAGRAMSBASE UNIT DIMENSIONS
31
16 22
600
27
43
Base unit with aluminium hand-railSquared-edge door(side panel code X)
Base unit(Side panel code N)
Base unit with drawers(Side panel code N)
625
600
560
514
54057
3
11241078
75
02
02
0
79
08
0
87
0
2370
2
98
78
68
0
22
625
600
560
514
54057
3
39213078
62
02
02
0
66
02
10
87
0
23350
2
378
65
62
10
22
625
600
560
514
54057
3
11241078
62
02
02
0
66
02
10
87
0
2370
2
98
65
62
10
22
2370
2
98
11241078
625
560 520
500
54057
3
75
02
02
0
79
08
0
87
0
500
50
28
01
40
22
22
14
0
36
01
40
14
0
22
22
14
0
2
50
2
22
2
28
2
All doors are 23 mm thick, excepted the 20 mm WK6 door with pocket-handle.
DIAGRAMSTALL UNIT DIMENSIONS
32
625
600
560
514
540573
2370
298
11241078
2020
20
1900
/ 2
060
1310
525
/ 68
5
150/
120
150/
120
42
80
24
2
2050
/ 2
210
2020
/ 2
180
625220600
560
514
540573
11241078
20
20
20
2000
1336
556
/ 71
6
1960
1250
690
210
625
600
560
514
540573
2370
298
11241078
2020
20
2130
760
786
1336
1310
80
2210
80
22
625
600
560
514
540573
2370
298
11241078
2020
2020
2340
598
2336
1064
598
80
2420
2Tall unit(side panel code N)
All doors are 23 mm thick, excepted the 20 mm WK6 door with pocket-handle.
DIAGRAMSBASE UNIT DIMENSIONS MOD. CASE SYSTEM 2.3
33
62426
2525
574/674
50010
50010
500
1 23550/650
53220/120
4
69
22
07
07
0
85
25
0
90
2
40
2
58
3 69
0 85
0
84
84
25
11
5
62426
2525
574/674
500
500
500
1 23550/650
53220/1204
69
22
07
07
0
85
25
0
90
2
40
40
7
36
40
7
25
14
01
5
2
62426
2525
574/674
400
200
1 23550/650
45
72
01
10
11
01
55
85
25
0
90
2
40
40
7
36
40
7
25
146
12
54
0
15
62426
2525
574/674
200
1 23550/650
45
72
01
10
11
01
55
85
25
0
90
2
46
12
54
0
400
40
25
11
5
Ø140105/205
Ø140105/205
2 28
50
574/674
795
1 23550/650
62426
2525
574/674
500
500
500
1 23550/650
53220/1204
62
22
07
07
07
0
85
25
0
90
2
40
40
7
36
3
20
71
97
25
11
5
2
62426
2525
62
22
07
07
07
0
85
25
0
90
2
15
500
40
25
1
85
0
Please note: side panel d. 650 to be used with 705 mm deep tops, in wall-mounted, island and peninsula compositions. Side panel d. 550 to be used with 1.260 mm deep tops,
in island compositions. Standard wall units without handle.Standard tall units with aluminium hand-rail or STEEL handle.
Base unit with single pull-out door,2 internal drawers,w. 450 - 600 mm
Base unit with 2 heavy-duty drawers,1 internal drawer with stainless steel front panel,w. 450 - 600 - 900 mm
Under-sink base unit with 1 heavy duty drawer+ flap door + differentiated waste disposal,w. 900 - 1.200 mm
Under-sink base unit with pull-out door+ differentiated waste disposal,w. 600 - 900 - 1.050 - 1.200 mm
Base unit with 2 drawers + 1 heavy-duty drawer,w. 450 - 600 - 900 mm
Corner base unit with pull-out door,with 1 half-circular chromium - plated wire basket,1.395 x 795 mm
DIAGRAMSSUSPENDED, PENINSULA AND ISLAND BASE UNIT DIMENSIONS MOD. CASE SYSTEM 2.3
34
574/674
500
550
1 23550/650
20
290
2099
409
407
2
574/674
550
1 23550/650
20
290
2099
409
407
2
208
197
2
500
500
574/674
550
1 23550/650
19
220
7020
99
409
407
2
724
5711218
1 23700
2030
30
462 41
8
442
1212
500
12
1174
571571 8
1 231150
2030
30
462 41
8
442
1212
500
900
87612 12 1
1200/1800
586/886 586/886412 12
900
87612 12
1200/1800
586/886 586/886412 12
Suspended base unitwith heavy-duty pull-out drawer,w 600 - 900 - 1.200 mm
Suspended base unitwith 2 heavy-duty pull-outdrawers, w. 600 - 900 mm
Suspended under-sink base unitwith flap door,w. 900 - 1050 - 1.200 mm
Peninsula base unit with pull-out heavy-duty drawer,totally in wood or anodised aluminium finish,w. 900 - 1.200 - 1.800 mm
Please note: suspended base units d. 650 to be used with 705 mm deep tops, in wall-mounted or island compositions.suspended base units d. 550 to be used with 1.260 mm deep tops, in wall-mounted or island compositions.
Peninsula base unit with pull-out heavy-duty drawer on one side and open-faced element on the opposite side,Totally in wood or anodised aluminium finish, w. 900 - 1.200 - 1.800 mm
DIAGRAMSBASE UNIT DIMENSIONSMOD. CASE SYSTEM 5.0
35
62426
2525
675/601
500 10
500 10
500
1 50
20
624/550
53294/204
692
2070
70
852
50
902
40
2
583 69
0 850
84
84
251
15
62426
2525
675/601
500
500
500
1 50
20
624/550
53294/204
692
2070
70
852
50
902
40
407
36
407
251
4015
2
62426
2525
675/601
400
200
1 50
20
624/550
457
2011
011
015
5
852
50
902
40
407
36
407
25146
125
40
15
62426
2525
675/601
200
1 50
20
624/550
457
2011
011
015
5
852
50
902
461
2540
400
4025
115
ÿ140179/105ÿ140179/105
2 285
0
Base unit with single pull-out door, 2 internal drawers,w. 450 - 600 mm
Base unit with 2 heavy-duty drawers,1 internal drawer with stainless steel front panel,w. 450 - 600 - 900 mm
Under-sink base unit with 1 heavy duty drawer + flap door + differentiated waste disposal, w. 900 - 1.200 mm
Under-sink base unit with pull-out door + differentiated waste disposal,w. 600 - 900 - 1.050 - 1.200 mm
Base unit with 2 drawers + 1 heavy-duty drawer,w. 450 - 600 - 900 mm
Corner base unit with pull-out door,with 1 half-circular chromium-plated wire basket1.395 x 795 mm
62426
2525
675/601
400
200
1 50
20
624/550
457
2011
011
015
5
852
50
902
40
407
36
407
25146
125
40
15
62426
2525
675/601
200
1 50
20
624/550
457
2011
011
015
5
852
50
902
461
2540
400
4025
115
ÿ140179/105ÿ140179/105
2 285
0
Please note: side panel d. 624 to be used with 705 mm deep tops, in wall-mounted, island and peninsula compositions.side panel d. 550 to be used with 1.260 mm deep tops, in island compositions.
DIAGRAMSTALL UNIT DIMENSIONSMOD. CASE SYSTEM 5.0
36
6031 50552
7084
020
700
2020
1600
140
1740
200
251 65
284
1037
135
1307
84
1537
(1) 1
590
- (2)
160
2
84
925
15
204
552
2520
500 10
500 10
500
500
500
6031 50552
7055
620
020
700
730
2065
2020
1600
140
1740
150
200
1037
135
1307
84
1537
84
92585
515
204
552
2520
500 10
500
500
Tall unit with lower dishwasherand upper pull-out door,w. 600 mm
Tall unit with single pull-out door,w. 600 mm(1) Stainless steel door - (2) Wood/Corian® door
Tall unit with upper ovenand lower dishwasher,w. 600 mm
Tall unit with upper ovenand lower pull-out door,w. 600 mm
6031 50552
7084
020
700
2020
1600
140
1740
200
251 65
284
1037
135
1307
84
1537
(1) 1
590
- (2)
160
2
84
925
15
204
552
2520
500 10
500 10
500
500
500
6031 50552
7055
620
020
700
730
2065
2020
1600
140
1740
150
200
1037
135
1307
84
1537
84
92585
515
204
552
2520
500 10
500
500
DIAGRAMSBASE AND WALL UNIT DIMENSIONSMOD. XILA 2.3
37
630
plane
600
aluminium supporting frame
514
54057
3
2370
2
100
11241078
2370
2
100
11241078
68
02
02
0
72
015
0/12
0
87
0 /
84
03
5
600
560 520
500
54057
3
68
02
02
0
72
015
0/12
0
87
0 /
84
0
40
0/4
70
150/
120
14
0
22
34
2
14
0
500
40
0
23
42
28
2
71
615
0/12
0
22
90
5 /
87
5
625
600
560
514
54057
3
11241078
75
02
02
0
79
08
0
87
0
2370
2
100
2370
2
100
11241078
600
560 520
500
54057
3
75
02
02
0
79
08
0
87
0
500
78
68
0
22
47
08
01
40
22
34
2
14
0
47
0
23
42
28
2
345
h -
40
h
20
20
320 23
2
16 301
290
3
(h -
4)
mm
.
22
h. cm 60 n° 1 shelf 2 hingesh. cm 72 n° 1 shelf 2 hingesh. cm 88 n° 2 shelves 2 hingesh. cm 116 n° 3 shelves 3 hinges
DIAGRAMSTALL UNIT DIMENSIONSMOD. XILA 2.3
38
625
600
560
514
540573
2370
2100
11241078
2020
20
1900
/ 2
060
1310
525
/ 68
5
150/
120
150/
120
42
80
24
2
2050
/ 2
210
2020
/ 2
180
1336
556
/ 71
6
625
600
560
514
540573
23702
100
11241078
2020
20
2130
760
786
1336
1310
80
2210
80
22
625
600
560
514
540573
23702
100
11241078
2020
2020
2340
598
2336
1064
598
80
2420
2
60019 19 600 19
2535
600 19 600 201920
625
Oven
39DIAGRAMSCORNER BASE AND WALL UNIT DIMENSIONS,WORKTOP LENGTH CALCULATION
HOW TO CALCULATE THE WORKTOP LENGTH DIMENSIONS OF BASE UNITS AND CORNER WALL UNITSBASE UNITS WALL UNITS
“a” Top L= 600 + 600 + 1.000 - 630= 1.570 mm (+ customised solution for 90° worktop)“b” Top L= 1.000 + 600 + 645 + 5= 2.250 mm (+ customised solution for 45° worktop)“c” Top L= 5 + 645 + 600 + 600 + 700= 2.250 mm“d” Top L= 1.300 + 1.200 + 600 + 1.150 - 630= 3.620 mm (+ customised solution for 90° worktop)“e” Top L= 600 + 600 + 600 + 700 - 630= 1.870 mm
internalcorner base unit
externalcorner base unit
left linearcorner base unit
right linearcorner base unit
60
07
00
625Top 630
62
5To
p 6
30
9001150
60
07
00
625Top 630
62
5To
p 6
30
12001300
625Top 630
62
5To
p 6
30
62
5To
p 6
30
64
5
60
04
5
60045
625Top 630
645
1000
10
00
Linear corner base unitleft, mirrored right. Hinge at 175°.
Linear corner base unitleft, mirrored right.Hinge at 175°.
Internal corner base unit
External corner base unit
> with shelf.
> with chromium-platedwire basket.
> with 'MAGIC' corner.
> with shelf.
> with chromium-platedwire basket.
> with 'MAGIC' corner.
> with shelf.
> with chromium-platedwire basket.
> with shelf.
70
0
342Top 630
34
5To
p 6
30
4507001150
70
0
342Top 630
34
5To
p 6
30
6007001300
342Top 630
34
5To
p 6
30
3007001000
30
07
00
90
0
342Top 830
34
5To
p 8
30
900
> with shelf.
> with stainless steelplate-rack.
> with shelf.
> with shelf.
> with stainless steelplate-rack.
> with shelf.
> with stainless steelplate-rack.
40EXAMPLE OF CODE LISTCOMPILATION
10
190
120 122
123
20 30 40
130
170
180
140 150 160
50 60
200
70
80
90 100
210
110
600 600 1300 700
1550
3100
830
630
2500
600
90020 20600 20 622
600 600 600
FINISHED SIDE PANEL
Carcass: ivory melamine treated presswood. Presswood shelves.Side panel: h. 790 mm (code N).Plinth: h. 80 mmFinish: sand coloured laminate with aluminium border.Door type: A (square-edged)Handle: Factory series.Handle position: standard.Worktops: stainless steel, th. 40 mmElectrical appliances: Electrolux.
FURNISHING
10. Tall unit for fridge w. 600 mm11. Finished side panel h. 2.130 mm
20. Tall unit f/shelves30. Corner tall unit w/sliding doors w. 1.240 mm40. Base unit w/single pull-out door w. 600 mm50. Base unit w/4 drawers w. 600 mm
51. Roll-holder 52. Cutlery holder
60. Oven base unit w. 600 mm70. Pots and pans holder base unit w. 600 mm
71. Finished side panel for base unit80. End panel h. 870 mm, w. 622 mm (n° 2)
81. Installation of feet h. 12 mm (n° 2)90. Under-sink base unit w. 900 mm100. Door for dishwasher w. 600 mm
110. Rear panel h. 858+12 mm, w. 1.540 mm111. Installation of feet h. 12 mm
120. Aluminium plinth h. 80, w. 2.563 mm121. Fridge ventilation slots 122. Aluminium plinth h. 80 mm, l. 2.563 mm123. Aluminium plinth h. 80 mm, l. 1.497 mm124. Aluminium lateral plinth h. 80 mm (n° 2)
130. Wall unit h. 600 with shelf w. 600 mm (R)140. Wall unit h. 600 with shelf w. 600 mm (L)150. Stainless steel hood design Boffi h = 600, W = 600 mm160. Wall unit h. 600 mm. with shelf w. 600 mm (R)
161. Finished side panel h. 600 mm
TOPS
170. Stainless steel top, th. 40 mm, d. 630 mm, w. 2.401 mm171. Welded hob, 4 burners
180. Stainless steel top, th. 40 mm, d. 830 mm, w. 1.542 mm181. Welded sink, 2 basins 182. KWC Mixer tap by Boffi
ELECTRICAL APPLIANCES
190. Electrolux fridge200. Electrolux stainless steel oven210. Electrolux concealed dishwasher