FormatItem NoSLS573 codeDiscriptionQtyUnitRateAmount

Section DBILL NO :1 OFFICE BUILDING - WATER SUPPLY SCHEME Note 1. All rates & prices shall be excluive of VAT, Which should only be shown separately in summery. As for the tender eveluation purposes these rates & prices will be considered to be exclusive of VAT. Item NoSLS573 codeDiscriptionQtyUnitRateAmountSECTION - DEXCAVATION AND EARTH WORKEXCAVATINGClearingD.1.1.1Site preparation for cearing site vegetation 3m away from outer wall and filling voids with selected earth as directed by engineer344mD.1.2.1site preparation for removing trees girth >500m and 1000mm and filling voids with selected earth as directed by engineer 02nrD.1.2.2site preparation for removing trees girth >1000m and 1500mm and filling voids with selected earth as directed by engineer 02nrExcavation and earth workD.2.4.1Excavation pits for columns depth not exceeding 1.0m commencing from ground level 04mD.2.4.2Excavation pits for columns depth not exceeding 1.0m not exceeding 2.0m commencing from ground level 0.70mD.2.5.1Excavation for foundation trenches width exceeding 300mm and depth not exceeding 1.0m commencing from ground level 29mD.2.5.2Excavation for foundation trenches width exceeding 300mm and depth exceeding 1.0m not exceeding 2.0m commencing from ground level 4.9mD.7.2.1Categery B timber or suitable material for earthwork support for pits total depth not exceeding 2.0m and distance between opposing faces 2m171mD.7.2.1Categery B timber or suitable material for earthwork support for foundation trenches total depth not exceeding 2.0m and distance between opposing faces 2m19mD.8.3.1Disposal of excavated material away from site as directed by the engineer44mD.9.1.1Filling to excavation with selected excavated material an average depth 900mm and filling with 150mm thick layers watered compacted and well rammed3.4mD.9.3.1Filling to make up level with selected excavated material an average depth 200mm thick layers watered compacted and well rammed20mD.9.3.1Filling to make up level with selected excavated material an average depth50 mm thick layers watered compacted and well rammed3.2mD.9.3.1Filling to make up level with selected excavated material an average depth 125mm thick layers watered compacted and well rammed1.5m

Section F1Item NoSLS573 codeDiscriptionQtyUnitRateAmountSECTION FCONCRETE WORKReinforcement and formwork measured seperately uless otherwise stated.SECTION F2INSITU CONCRETEMass concrete- Grade 15F1.18.1concrete channel having 100mm thick walls, concrete drains complete as shown in detail drawing50mF1.3.1.1In 100mm thick concrete bed and slab on ground 12mF1.3.1.1In 125mm slab to slope ramp4.6mF1.3.1.1In 150mm slab to slope porch ramp0.3mReinforced Concrete - Grade 25F1.14in lintels1.1mF1.2.2.2In bases of column0.8mF1.2.3.2In column shaft upto finish first floor level0.7m

Section F2Item NoSLS573 codeDiscriptionQtyUnitRateAmountSECTION F2FORMWORKformwork in approved timber. Rate to include for splayed edges, battens, strutting, bolting, wedging, easing, striking, and removalF2.1.2.1200 mm height category B timber or suitable material rough finish formwork for sides of column bases18mF2.12.1.1Catogory B timber or suitable materialfor sides of attached isolated columnsF2.12.2.1Catogory B timber or suitable materialfor sides of attached square columns3.2mF2.13.1.1In sides and soffit of isolated square beam10mF2.14.2.1To sides and soffit of lintels16m

Section F3Item NoSLS573 codeDiscriptionQtyUnitRateAmountSECTION F3 REINFORCEMENT IN INSITU CONCRETETor/ild steel rod reinforcement cut to lengths, bent to shape, placed in position and tied with GI wireFor beams and lintelsF3.1.1.76mm diameter mild steel bars0.02tF3.2.1.710mm diameter tor steel bars0.04tF3.2.2.712mm diameter tor steel bars0.06tFor columnF3.1.1.16mm diameter mild steel bars0.02tF3.2.1.110 mm diameter tor steel bars0.03tF3.2.2.112mm diameter tor steel bars0.07t

Section GItem NoSLS573 codeDiscriptionQtyUnitRateItem NoSECTION - G MASONRY WORKSECTION G1 - BRICK WORK / BLOCK WORKG1.1.1.1.1225mm thick vertical common brick solid walls in cement sand mortar 1:5 with English bond.167mG1.1.1.1.1113mm thick vertical common brick solid walls in cement sand mortar 1:5 with Streacher bond.53mSECTION G2 -STONE WORKRandom rubble masonry vertical foundation in cement sand mortar 1:5G2.1.1.1.1475mm wide66mG2.1.1.1.1350mm wide16mG2.1.1.1.1375mm wide16mG2.1.1.1.1250mm wide04mSECTION -HWATER PROOFINGH.2.1.120 mm thick horizontal damp proof course in cement sand mortar 1:3 on 250mm wide rubble foundaton and treated with two coats of hot tar and blinded with sand16mH.2.2.120 mm thick horizontal damp proof course in cement sand mortar 1:3 on 350mm wide rubble foundaton and treated with two coats of hot tar and blinded with sand21m

Section KItem NoSLS573 codeDiscriptionQtyUnitRateAmountSECTION - K METAL WORKDoors and windowsAll materials supplied,fabricated and fixed in position complete as shown in detail on drawing and as specified .Provition shall be made for breaking walls / concrete floors whenever necessary and making goood as directed. Rate to be included for supply and fix heavy quality brass ironmongory , inclding fixing with with brass screws to match and fixing of security grills for windows and fanlights as directed K.1.1Glazed panelled with Aluminium frame window (type W1) of size 1800*1650mm,complete as shown in detail on drawing and as specified.07nrK.1.1Glazed panelled with Aluminium frame window (type W2) of size 500*1650mm,complete as shown in detail on drawing and as specified.02nrK.1.1Glazed panelled with Aluminium frame fanlight (type F1) of size 500*750mm,complete as shown in detail on drawing and as specified.05nrK.3.1Glazed panelled with Aluminium louvers(type F2) of size 500*750mm,complete as shown in detail on drawing and as specified.03nrK.6.1Glazed panelled with Aluminium frame door (type D1) of size 1200*2550 complete as shown in detail on drawing and as specified01nrK.6.1Glazed panelled with Aluminium frame door (type D2) of size 900*2550mm,complete as shown in detail on drawing and as specified.01nrK.6.1Aluminium frame with marine type plywood door (type D3) of size 750*2100mm complete as shown in detail on drawing and as specified02nrK.7.1Aluminium roller shutter (type RS) of size 4000*2550 ,complete as shown in detail on drawing and as specified.01nrK.9.1Glazed and Aluminium Slidding door (type SD2) of size 900*2100 ,complete as shown in detail on drawing and as specified.04nr

Section LItem NoSLS573 codeDiscriptionQtyUnitRateAmountSECTION - LWOOD WORKSupplying and fixing category 'B' wrought timber for following items, complete as shown in drawings and as directed. Rateto be included for applying approved quality wood preservative on all timber surfaces.L1.4.3.175x125mm purlin30mL1.4.4.150x175 mm ridge plate4.8mL1.4.5.150x100 mm rafters357mL1.4.5.1150x175 mm hip rafters34mL1.4.6.1 50x50 mm runner 321mL1.4.7.175x100 mm wall plate 39mL1.4.7.175x150 mm beam8.3m

Section NItem NoSLS573 codeDiscriptionQtyUnitRateAmountSECTION - N PARTITIONSPartition workpartitioning supplied or fabricated and fixed in position complete as shown in detail on drawing and as specified. Provision shall be made for breaking walls and concrete floor etc. whenever necessary and making good as directed.partition typeN.4.1.1.1partition, type p3 3660x2700mm power coated aluminium frame(colour to be specified ) with laminated plywood panels upto 2700 mm. And 5mm thick glazed partition. All inclusive as per drawingmN.4.1.1.1partition, type p2 3050x2700mm power coated aluminium frame(colour to be specified ) with laminated plywood panels upto 2700 mm. And 5mm thick glazed partition. All inclusive as per drawingmN.4.1.1.1partition, type p1 1890x2700mm power coated aluminium frame(colour to be specified ) with laminated plywood panels upto 2700 mm. And 5mm thick glazed partition. All inclusive as per drawingmN.4.1.1.1partition, type p4 2740x2700mm power coated aluminium frame(colour to be specified ) with laminated plywood panels upto 2700 mm. And 5mm thick glazed partition. All inclusive as per drawingmN.4.1.1.1partition, type p5 2815x2700mm power coated aluminium frame(colour to be specified ) with laminated plywood panels upto 2700 mm. And 5mm thick glazed partition. All inclusive as per drawingmN.4.1.1.1partition, type p6 2540x900 mm power coated aluminium frame(colour to be specified ) with laminated plywood panels upto 2700 mm. And 5mm thick glazed partition. All inclusive as per drawingmN.4.1.1.1partition, type p7 3275x900 mm power coated aluminium frame(colour to be specified ) with laminated plywood panels upto 2700 mm. And 5mm thick glazed partition. All inclusive as per drawingmN.4.1.1.1partition, type p8 3038x900 mm power coated aluminium frame(colour to be specified ) with laminated plywood panels upto 2700 mm. And 5mm thick glazed partition. All inclusive as per drawingm

Section QItem NoSLS573 codeDiscriptionQtyUnitRateAmountSECTION - QPLUMBING/ SANITARY INSTALLATIONSAll Fixtures shall be supplied and fixed complete including effecting connection to water main and disposal connection as required. All sanitory fittings shall be approved quality make and colour unless otherwise stated. P.V.C pipe (Type 1000) specials,fittings and other material supplying, laying, and jointing or fixing completing walls with plated (P.V.C brackets) involves as requires or laying underground as directed.(Pipe diameter 50 mm shall be including all specials)Note: The following quantities are provisional.Cold water serviceQ.1.1.220mm dia P.V.C straight pipes laying in trenchesmQ.1.1.620 mm dia P.V.C straight pipes laying on groundmQ.2.1.120 mm elbow fittingsnrQ.2.1.125 mm elbow fittingsnrQ.2.1.132 mm elbow fittingsnrQ.2.1.150 mm elbow fittingsnrQ.2.1.325x25 mm tee fittingsnrQ.2.1.325x20 mm tee fittingsnrQ.2.1.332x20 mm tee fittingsnrQ.2.1.332x25 mm tee fittingsnrQ.2.1.625-20 mm reducer fittingsnrQ.2.1.650-32 mm reducer fittingsnrQ.2.1.632-20 mm reducer fittingsnrQ.14.120 mm dia stop valvenrQ.14.125 mm dia stop valvenrQ.14.132 mm dia stop valvenrQ.14.150 mm dia stop valvenrQ.14.1Ball valvenrQ.14.125 mm dia non return valvenrWaste Water ServiceQ.1.1.150 mm dia uPVC waste water pipes laying in concrete ducts.mQ.1.1.163 mm dia waste water pipes laying in ductsmQ.1.1.140 mm dia waste water pipes laying in ductsmQ.2.1.2Extraover for 63 mm dia PVC pipe for 90 bends nrQ.2.1.2Extraover for 63 mm dia PVC pipe for 45 bends nrQ.2.1.3Extraover for 63 mm dia PVC pipe for 63x63 mm tees nrQ.2.1.3Extraover for 63 mm dia PVC pipe for 63x50 mm teesnrQ.2.1.3Extraover for 63 mm dia PVC pipe for 63x40 mm teesnrSewage Disposal SectionQ.1.1.1110 mm dia PVC sewer pipemQ.1.1.1110 mm dia PVC vent pipemQ.2.1.3Extrover for 110 mm dia PVC pipe for 110x110 mm teesnrQ.2.1.2Extraover for 110 mm dia PVC for long radius bend nrFixutures and AppliancesAll fixtures Shall be supplied and fixed complete including effecting connection to water main and disposal connection as required.All sanitary fittings shall be of approved colour unless otherwise stated. As directed by the Engineer.Q.5.1.1Europian type low level suite comprizing of pedestral type water closet complete with strap system. Seat cover and all necessary accesaries all complete to woorking order as directed by Engineer.nrQ.5.1.1Wash basin pedestral type with chromium plated high quality wash basin tap, waste plug accesaries. All complete to working Order as Directed by the Engineer.nrQ.5.1.1600x500 mm bathroom mirror with plastic frame complete with fittingsnr

Section SItem NoSLS573 codeDiscriptionQtyUnitRateItem NoSECTION - S ELECTRICAL INSTALLATIONSNote : All condute pipes are to be concealed in walls and ceiling.wiring to be completed upto MCB.rate to be included for necessary testing. All materials of approved quality.(as per IEE regulation) Supplying and fixing completed as directed.rate to be included for all pvc copper pvc wiring involved as specified and switching including switches with approved made complete to working order. All fixes shall be approved quality and made to the satisfaction of the Engineer and as specification.S.11.1.1Main electrical cable 2x6 mm (pvc copper pvc) from electricity meter point to main circuit breake pointmS.22.2.1Final circuit for 5A socket outletnrS.22.2.2final socket for ceiling fansnrS.22.2.3Final Circuit for lighting switches.nrS.23.1Final circuit for 5A socket outlet flush typenrS.24.1One way two gang switchnrS.24.1One way three gang switch nrS.24.1One way four gang switchnrS.24.1One way five gang switchnrS.26.1Wall bracket lamp with glass shades nrS.26.1Water tight pendent lamp with plastic globenrS.26.1Double flourescent lamp with prismatic type diffuser four feet longnrS.34.1.1Single phase 30 A ELCB with 8 number 6A miniature circuit breakers in operated in plastic box with hinged door. Rate to be included for suitable buss bars. nrS.41.1.1Ceiling fans having 1400mm sweep with 5 speed regulator and off position and necessary accesariesnrS.20.1Earth electrodes complete with 50mm dia 1500mm long heavy guage GI pipe with a brick gully driven into ground for connecting framework connectivity conductor in order to obtain satisfactory earth resistance reading as required by IEEnr

Section T1Item NoSLS573 codeDiscriptionQtyUnitRateAmountSECTION - T FLOOR FINISHES/CEILING FINISHESSECTION F1 - FLOOR FINISHEST1.1.1.112mm thick rendering in cemet sand mortar 1:3 finished smooth with neat cement floating of approved colour.mT1.1.1.112mm thick rendering in cemet sand mortar 1:3 finished smooth with neat cement floating of approved colour on ramp.mT1.1.1.112mm thick rendering in cemet sand mortar 1:3 finished rough floating of approved colour on porch ramp.mT1.1.10.112 mm thick 100mm high plushed type skirting in cement sand mrtar 1:3 and finished smooth with cement floating to matching colour to floormT1.1.11.112mm thick render in cement sand mortar 1:3 finished smooth with neat cement floating of approved colour on drain.mT1.9.1Non slip type ceramic floor tiles of approed quality make and colour laid on concreete in toilet and washing area including beding. In cement sand mortar 1:2 with cement grout and joints filled with cement grout of matching colour and complete as directed by Engineer.mT1.9.1.1Homogenious ceremic floor tile of approved quality and colour. Layed on concrete floor.porch, clarical staff room, meter readers room, including bedding in cement sand mortar 1:2 with cement grout and joints filled with cement grout of matching colour and complete as shown in detailed drawing and as directed by Engineer.mT1.9.9.112mm thick 100mm height 1:3 cement sand mortar plush skirting to matching colour to the floorm

Section T2Item NoSLS573 codeDiscriptionQtyUnitRateAmountSECTION T2WALL AND CEILING FINISHESInternal plasteringT2.1.2.116 mm thick internal plastering on brick wall in cement lime and sand mortar 1:1:5 and finished smooth with lime floor.mT2.1.1.162.5 wide 16mm thick internal doors and windows reveals in cement , lime, sand 1:1:5 and finished smooth with lime puttymT2.1.1.1113mm wide internal side of archmExternal plasteringT2.1.2.116 mm thick external plastering on brick wall in cement lime and sand mortar 1:1:5 and finished withsemi rough surface.mRevealsT2.1.1.162.5 wide 16mm thick external doors and windows reveals in cement , lime, sand 1:1:5 and finished semi rough with lime puttymT2.1.1.1175 mm wide 16mm thick internal sides of the RSmT2.1.1.116 mm thick internal plastering on brick wall in cement lime and sand mortar 1:1:5 and finished with fair finish.mT2.13.2200x200mm glazes ceramic wall tile in approved colour and quality on cement sand 1:3 tile bed and point with tile grout to match and forming neat uniform joints between tiles in toilet area including revealsm

Sheet13

Final BOQBILL NO :1 BUILDING NAME - Note 1. All rates & prices shall be excluive of VAT, Which should only be shown separately in summery. As for the tender eveluation purposes these rates & prices will be considered to be exclusive of VAT. Item NoSLS573 codeDiscriptionQtyUnitRateAmountSECTION - DEXCAVATION AND EARTH WORKEXCAVATINGClearing2.001D.1.1.1Site preparation for cearing site vegetation 5m away from outer wall and filling voids with selected earth as directed by engineerm985.000.002.002D.1.2.1site preparation for removing trees girth >500m and 1000mm and filling voids with selected earth as directed by engineer nr2,400.000.002.003D.1.2.2site preparation for removing trees girth >1000m and 1500mm and filling voids with selected earth as directed by engineer nr4,200.000.002.004Excavation and earth work2.005D.2.4.1Excavation pits for columns depth not exceeding 1.0m commencing from ground level m572.000.002.006D.2.4.2Excavation pits for columns depth not exceeding 1.0m not exceeding 2.0m commencing from ground level m625.000.002.007D.2.5.1Excavation for foundation trenches width exceeding 300mm and depth not exceeding 1.0m commencing from ground level m572.000.002.008D.2.5.2Excavation for foundation trenches width exceeding 300mm and depth exceeding 1.0m not exceeding 2.0m commencing from ground level m625.000.002.009D.7.2.1Categery B timber or suitable material for earthwork support for pits total depth not exceeding 2.0m and distance between opposing faces 2mm365.000.002.010D.7.2.1Categery B timber or suitable material for earthwork support for foundation trenches total depth not exceeding 2.0m and distance between opposing faces 2mm365.000.002.011D.8.3.1Disposal of excavated material away from site as directed by the engineerm450.000.00Total of page no 010.00Item NoSLS573 codeDiscriptionQtyUnitRateAmount2.012D.9.1.1Filling to excavation with selected excavated material an average depth 900mm and filling with 150mm thick layers watered compacted and well rammedm275.000.002.013D.9.3.1Filling to make up level with selected excavated material an average depth 200mm thick layers watered compacted and well rammedm1,375.000.002.014D.9.3.1Filling to make up level with selected excavated material an average depth50 mm thick layers watered compacted and well rammed3.2m1,525.004,880.002.015D.9.3.1Filling to make up level with selected excavated material an average depth 125mm thick layers watered compacted and well rammed1.5m1,425.002,137.50SECTION FCONCRETE WORKReinforcement and formwork measured seperately uless otherwise stated.SECTION F2INSITU CONCRETEMass concrete- Grade 152.016F1.18.1concrete channel having 100mm thick walls, concrete drains complete as shown in detail drawingm1,871.000.002.017F1.3.1.1In 100mm thick concrete bed and slab on ground m12,500.000.002.018F1.3.1.1In 125mm slab to slope rampm12,500.000.002.019F1.3.1.1In 150mm slab to slope porch rampm12,500.000.00Reinforced Concrete - Grade 252.020F1.14in lintelsm21,016.000.002.021F1.2.2.2In bases of columnm21,016.000.002.022F1.2.3.2In column shaft upto finish first floor levelm21,016.000.00SECTION F2FORMWORKformwork in approved timber. Rate to include for splayed edges, battens, strutting, bolting, wedging, easing, striking, and removalTotal of page no 027,017.50Item NoSLS573 codeDiscriptionQtyUnitRateAmount2.023F2.1.2.1200 mm height category B timber or suitable material rough finish formwork for sides of column basesm200.000.002.024F2.12.1.1Catogory B timber or suitable material for sides of attached isolated columnsm1,365.000.002.025F2.12.2.1Catogory B timber or suitable materialfor sides of attached square columnsm1,365.000.002.026F2.13.1.1In sides and soffit of isolated square beamm1,435.000.002.027F2.14.2.1To sides and soffit of lintelsm1,435.000.00SECTION F3 REINFORCEMENT IN INSITU CONCRETETor/ild steel rod reinforcement cut to lengths, bent to shape, placed in position and tied with GI wireFor beams and lintels2.028F3.1.1.76mm diameter mild steel barst201,003.000.002.029F3.2.1.710mm diameter tor steel barst201,003.000.002.030F3.2.2.712mm diameter tor steel barst201,003.000.00For column2.031F3.1.1.16mm diameter mild steel barst201,003.000.002.032F3.2.1.110 mm diameter tor steel barst201,003.000.002.033F3.2.2.112mm diameter tor steel barst201,003.000.00SECTION - G MASONRY WORKSECTION G1 - BRICK WORK / BLOCK WORK2.034G1.1.1.1.1225mm thick vertical common brick solid walls in cement sand mortar 1:5 with English bond.m2,743.000.002.035G1.1.1.1.1113mm thick vertical common brick solid walls in cement sand mortar 1:5 with Streacher bond.m1,374.000.002.036SECTION G2 -STONE WORKRandom rubble masonry vertical foundation in cement sand mortar 1:5Total of page no 030.00Item NoSLS573 codeDiscriptionQtyUnitRateAmount2.037G2.1.1.1.1475mm widem5,400.000.002.038G2.1.1.1.1350mm widem4,600.000.002.039G2.1.1.1.1375mm widem4,800.000.002.040G2.1.1.1.1250mm widem2,500.000.00SECTION -HWATER PROOFING2.041H.2.1.120 mm thick horizontal damp proof course in cement sand mortar 1:3 on 250mm wide rubble foundaton and treated with two coats of hot tar and blinded with sandm350.000.002.042H.2.2.120 mm thick horizontal damp proof course in cement sand mortar 1:3 on 350mm wide rubble foundaton and treated with two coats of hot tar and blinded with sandm400.000.00SECTION - K METAL WORKDoors and windowsAll materials supplied,fabricated and fixed in position complete as shown in detail on drawing and as specified .Provition shall be made for breaking walls / concrete floors whenever necessary and making goood as directed. Rate to be included for supply and fix heavy quality brass ironmongory , inclding fixing with with brass screws to match and fixing of security grills for windows and fanlights as directed 2.043K.1.1Glazed panelled with Aluminium frame window (type W1) of size 1800*1650mm,complete as shown in detail on drawing and as specified.nr25,591.000.002.044K.1.1Glazed panelled with Aluminium frame window (type W2) of size 500*1650mm,complete as shown in detail on drawing and as specified.nr10,000.000.00Total of page no 040.00Item NoSLS573 codeDiscriptionQtyUnitRateAmount2.045K.1.1Glazed panelled with Aluminium frame fanlight (type F1) of size 500*750mm,complete as shown in detail on drawing and as specified.nr4,569.000.002.046K.3.1Glazed panelled with Aluminium louvers(type F2) of size 500*750mm,complete as shown in detail on drawing and as specified.nr4,569.000.002.047K.6.1Glazed panelled with Aluminium frame door (type D1) of size 1200*2550 complete as shown in detail on drawing and as specifiednr68,745.000.002.048K.6.1Glazed panelled with Aluminium frame door (type D2) of size 900*2550mm,complete as shown in detail on drawing and as specified.nr48,182.000.002.049K.6.1Aluminium frame with marine type plywood door (type D3) of size 750*2100mm complete as shown in detail on drawing and as specifiednr45,025.000.002.050K.7.1Aluminium roller shutter (type RS) of size 4000*2550 ,complete as shown in detail on drawing and as specified.nr75,562.000.002.051K.9.1Glazed and Aluminium Slidding door (type SD2) of size 900*2100 ,complete as shown in detail on drawing and as specified.nr47,850.000.00SECTION - LWOOD WORKSupplying and fixing category 'B' wrought timber for following items, complete as shown in drawings and as directed. Rateto be included for applying approved quality wood preservative on all timber surfaces.2.052L1.4.3.175x125mm purlinm225.000.002.053L1.4.4.150x175 mm ridge platem232.000.002.054L1.4.5.150x100 mm raftersm125.000.002.055L1.4.5.1150x175 mm hip raftersm282.000.002.056L1.4.6.1 50x50 mm runner m139.000.002.057L1.4.7.175x100 mm wall plate m225.000.002.058L1.4.7.175x150 mm beamm250.000.00SECTION L2JOINERY2.059L2.10.2.125x225mm valance board fixed to the edges of rafters with boltsm826.000.00Total of page no 050.00Item NoSLS573 codeDiscriptionQtyUnitRateAmount2.060L2.11.2.125x225 mm barge board fixed to edge of wall plate, purlin, and ridge plate with brass screw nailm826.000.00SECTION - N PARTITIONSPartition workpartitioning supplied or fabricated and fixed in position complete as shown in detail on drawing and as specified. Provision shall be made for breaking walls and concrete floor etc. whenever necessary and making good as directed.partition type2.061N.4.1.1.1partition, type p3 3660x2700mm power coated aluminium frame(colour to be specified ) with laminated plywood panels upto 2700 mm. And 5mm thick glazed partition. All inclusive as per drawingm8,500.000.002.062N.4.1.1.1partition, type p2 3050x2700mm power coated aluminium frame(colour to be specified ) with laminated plywood panels upto 2700 mm. And 5mm thick glazed partition. All inclusive as per drawingm8,500.000.002.063N.4.1.1.1partition, type p1 1890x2700mm power coated aluminium frame(colour to be specified ) with laminated plywood panels upto 2700 mm. And 5mm thick glazed partition. All inclusive as per drawingm8,500.000.002.064N.4.1.1.1partition, type p4 2740x2700mm power coated aluminium frame(colour to be specified ) with laminated plywood panels upto 2700 mm. And 5mm thick glazed partition. All inclusive as per drawingm8,500.000.002.065N.4.1.1.1partition, type p5 2815x2700mm power coated aluminium frame(colour to be specified ) with laminated plywood panels upto 2700 mm. And 5mm thick glazed partition. All inclusive as per drawingm8,500.000.002.066N.4.1.1.1partition, type p6 2540x900 mm power coated aluminium frame(colour to be specified ) with laminated plywood panels upto 2700 mm. And 5mm thick glazed partition. All inclusive as per drawingm8,500.000.00Total of page no 060.00Item NoSLS573 codeDiscriptionQtyUnitRateAmount2.067N.4.1.1.1partition, type p7 3275x900 mm power coated aluminium frame(colour to be specified ) with laminated plywood panels upto 2700 mm. And 5mm thick glazed partition. All inclusive as per drawingm8,500.000.002.068N.4.1.1.1partition, type p8 3038x900 mm power coated aluminium frame(colour to be specified ) with laminated plywood panels upto 2700 mm. And 5mm thick glazed partition. All inclusive as per drawingm8,500.000.00SECTION - PROOF COVERING/ROOF PLUMBINGSupplying and fixing in position complete as shown in detail on Drawing and as directedRoof covering2.069P.31.1.1Zn/Al sheet roof covering on timber frame pitch 20.rate to be apply approved quality and colour painting suitable nailing and bolt connection.m1,298.000.002.070P.36.1.1Ridge plate covering with Zn/Al Ridge coverm508.000.002.071P.37.1.1hip plate covering with Zn/Al hip coverm508.000.00Roof Plumbing2.072P.43.1.1150mm square type Zn/Al gutter fixed to the valance board with Zn/Al brackets at 300mm centers complete as directed.m1,186.000.002.073P.44.1.1Extraover for 150mm Zn/Al gutter ,Zn/Al end capsnr250.000.002.074P.44.1.1Extraover for 150mm running headsnr250.000.002.075P.44.1.1Extraover for 150mm elbownr250.000.002.076P.45.1.1100mm dia Zn/Al down pipe with the necessary accessaries with complete to the wall with Zn/Al down pipe clips at suitable lengthnr1,186.000.002.077P.46.1.1Extraover 100mm Zn/Al down pipe for Zn/Al down pipe shoenr450.000.00SECTION - QPLUMBING/ SANITARY INSTALLATIONSAll Fixtures shall be supplied and fixed complete including effecting connection to water main and disposal connection as required. Total of page no 070.00Item NoSLS573 codeDiscriptionQtyUnitRateAmountAll sanitory fittings shall be approved quality make and colour unless otherwise stated. P.V.C pipe (Type 1000) specials,fittings and other material supplying, laying, and jointing or fixing completing walls with plated (P.V.C brackets) involves as requires or laying underground as directed.(Pipe diameter 50 mm shall be including all specials)Note: The following quantities are provisional.Cold water service2.078Q.1.1.220mm dia P.V.C straight pipes laying in trenchesm257.000.002.079Q.1.1.620 mm dia P.V.C straight pipes laying on groundm275.000.002.080Q.2.1.120 mm elbow fittingsnr40.200.002.081Q.2.1.125 mm elbow fittingsnr53.600.002.082Q.2.1.132 mm elbow fittingsnr70.800.002.083Q.2.1.150 mm elbow fittingsnr179.500.002.084Q.2.1.325x25 mm tee fittingsnr87.500.002.085Q.2.1.325x20 mm tee fittingsnr100.000.002.086Q.2.1.332x20 mm tee fittingsnr125.000.002.087Q.2.1.332x25 mm tee fittingsnr135.000.002.088Q.2.1.625-20 mm reducer fittingsnr100.000.002.089Q.2.1.650-32 mm reducer fittingsnr175.000.002.090Q.2.1.632-20 mm reducer fittingsnr135.000.002.091Q.14.120 mm dia stop valvenr30.000.002.092Q.14.125 mm dia stop valvenr55.000.002.093Q.14.132 mm dia stop valvenr70.000.002.094Q.14.150 mm dia stop valvenr105.000.002.095Q.14.1Ball valvenr1,652.000.002.096Q.14.125 mm dia non return valvenr125.00ERROR:#REF!Waste Water Service2.097Q.1.1.150 mm dia uPVC waste water pipes laying in concrete ducts.m295.000.002.098Q.1.1.163 mm dia waste water pipes laying in ductsm315.000.002.099Q.1.1.140 mm dia waste water pipes laying in ductsm275.000.002.100Q.2.1.2Extraover for 63 mm dia PVC pipe for 90 bends nr215.000.002.101Q.2.1.2Extraover for 63 mm dia PVC pipe for 45 bends nr215.000.00Total of page no 08ERROR:#REF!Item NoSLS573 codeDiscriptionQtyUnitRateAmount2.102Q.2.1.3Extraover for 63 mm dia PVC pipe for 63x63 mm tees nr240.000.002.103Q.2.1.3Extraover for 63 mm dia PVC pipe for 63x50 mm teesnr230.000.002.104Q.2.1.3Extraover for 63 mm dia PVC pipe for 63x40 mm teesnr225.000.00Sewage Disposal Section2.105Q.1.1.1110 mm dia PVC sewer pipem1,074.000.002.106Q.1.1.1110 mm dia PVC vent pipem731.000.002.107Q.2.1.3Extrover for 110 mm dia PVC pipe for 110x110 mm teesnr1,004.000.002.108Q.2.1.2Extraover for 110 mm dia PVC for long radius bend nr1,310.000.00Fixutures and AppliancesAll fixtures Shall be supplied and fixed complete including effecting connection to water main and disposal connection as required.All sanitary fittings shall be of approved colour unless otherwise stated. As directed by the Engineer.2.109Q.5.1.1Europian type low level suite comprizing of pedestral type water closet complete with strap system. Seat cover and all necessary accesaries all complete to woorking order as directed by Engineer.nr15,240.000.002.110Q.5.1.1Wash basin pedestral type with chromium plated high quality wash basin tap, waste plug accesaries. All complete to working Order as Directed by the Engineer.nr10,795.000.002.111Q.5.1.1600x500 mm bathroom mirror with plastic frame complete with fittingsnr6,255.000.00SECTION - S ELECTRICAL INSTALLATIONSTotal of page no 090.00Item NoSLS573 codeDiscriptionQtyUnitRateAmountNote : All condute pipes are to be concealed in walls and ceiling.wiring to be completed upto MCB.rate to be included for necessary testing. All materials of approved quality.(as per IEE regulation) Supplying and fixing completed as directed.rate to be included for all pvc copper pvc wiring involved as specified and switching including switches with approved made complete to working order. All fixes shall be approved quality and made to the satisfaction of the Engineer and as specification.2.112S.11.1.1Main electrical cable 2x6 mm (pvc copper pvc) from electricity meter point to main circuit breake pointm565.000.002.113S.22.2.1Final circuit for 5A socket outletnr2,447.000.002.114S.22.2.2final socket for ceiling fansnr4,001.000.002.115S.22.2.3Final Circuit for lighting switches.nr2,292.000.002.116S.23.1Final circuit for 5A socket outlet flush typenr505.000.002.117S.24.1One way two gang switchnr343.000.002.118S.24.1One way three gang switch nr355.000.002.119S.24.1One way four gang switchnr370.000.002.120S.24.1One way five gang switchnr392.000.002.121S.26.1Wall bracket lamp with glass shades nr1,111.000.002.122S.26.1Water tight pendent lamp with plastic globenr1,111.000.002.123S.26.1Double flourescent lamp with prismatic type diffuser four feet longnr4,382.000.002.124S.34.1.1Single phase 30 A ELCB with 8 number 6A miniature circuit breakers in operated in plastic box with hinged door. Rate to be included for suitable buss bars. nr12,503.000.002.125S.41.1.1Ceiling fans having 1400mm sweep with 5 speed regulator and off position and necessary accesariesnr5,207.000.002.126S.20.1Earth electrodes complete with 50mm dia 1500mm long heavy guage GI pipe with a brick gully driven into ground for connecting framework connectivity conductor in order to obtain satisfactory earth resistance reading as required by IEEnr5,220.000.00Total of page no 100.00Item NoSLS573 codeDiscriptionQtyUnitRateAmountSECTION - T FLOOR FINISHES/CEILING FINISHESSECTION F1 - FLOOR FINISHES2.127T1.1.1.112mm thick rendering in cemet sand mortar 1:3 finished smooth with neat cement floating of approved colour.m417.000.002.128T1.1.1.112mm thick rendering in cemet sand mortar 1:3 finished smooth with neat cement floating of approved colour on ramp.m417.000.002.129T1.1.1.112mm thick rendering in cemet sand mortar 1:3 finished rough floating of approved colour on porch ramp.m417.000.002.130T1.1.10.112 mm thick 100mm high plushed type skirting in cement sand mrtar 1:3 and finished smooth with cement floating to matching colour to floorm268.000.002.131T1.1.11.112mm thick render in cement sand mortar 1:3 finished smooth with neat cement floating of approved colour on drain.m417.000.002.132T1.9.1Non slip type ceramic floor tiles of approed quality make and colour laid on concreete in toilet and washing area including beding. In cement sand mortar 1:2 with cement grout and joints filled with cement grout of matching colour and complete as directed by Engineer.m3,302.000.002.133T1.9.1.1Homogenious ceremic floor tile of approved quality and colour. Layed on concrete floor.porch, clarical staff room, meter readers room, including bedding in cement sand mortar 1:2 with cement grout and joints filled with cement grout of matching colour and complete as shown in detailed drawing and as directed by Engineer.m3,175.000.002.134T1.9.9.112mm thick 100mm height 1:3 cement sand mortar plush skirting to matching colour to the floorm268.000.00SECTION T2WALL AND CEILING FINISHESInternal plastering2.135T2.1.1.162.5 wide 16mm thick internal doors and windows reveals in cement , lime, sand 1:1:5 and finished smooth with lime puttym29.000.002.136T2.1.1.1113mm wide internal side of archm36.000.00Total of page no 110.00Item NoSLS573 codeDiscriptionQtyUnitRateAmount2.137T2.1.2.116 mm thick internal plastering on brick wall in cement lime and sand mortar 1:1:5 and finished smooth with lime floor.m528.000.00External plastering2.138T2.1.2.116 mm thick external plastering on brick wall in cement lime and sand mortar 1:1:5 and finished withsemi rough surface.m431.000.00Reveals2.139T2.1.1.162.5 wide 16mm thick external doors and windows reveals in cement , lime, sand 1:1:5 and finished semi rough with lime puttym36.000.002.140T2.1.1.1175 mm wide 16mm thick internal sides of the RSm475.000.002.141T2.1.1.116 mm thick internal plastering on brick wall in cement lime and sand mortar 1:1:5 and finished with fair finish.m528.000.002.142T2.13.2200x200mm glazes ceramic wall tile in approved colour and quality on cement sand 1:3 tile bed and point with tile grout to match and forming neat uniform joints between tiles in toilet area including revealsm3,302.000.00SECTION VPAINTING2.143V.1.1.1Apply two coates of wall primer an two coates of approved quality and make luxury emulsion paint on faces of internal walls.m367.000.002.144V.1.1.1Apply two coates of wall primer an two coates of approved quality and make luxury emulsion paint on faces of internal doors and windows reveal.m367.000.002.145V.1.1.1preparing and apply two coates of primer and two coates of emulsion weather sealing paint on faces of extrnal wallsm384.000.002.146V.1.1.1Apply two coates of wall primer an two coates of approved quality and make luxury emulsion paint on faces of internal walls of bath room.m367.000.002.147V.1.1.2.1Apply two coates of wall primer an two coates of approved quality and make luxury emulsion paint on faces of internal side of arch.m23.000.00Total of page no 120.00Item NoSLS573 codeDiscriptionQtyUnitRateAmount2.148V.1.1.2.1Apply two coates of wall primer an two coates of approved quality and make luxury emulsion paint on faces of external doors and windows reveal.m24.000.002.149V.1.1.2.1Apply two coates of wall primer an two coates of approved quality and make luxury emulsion paint on faces of internal sides of RS.m23.000.00SECTION WDRAINAGE SYSTEM BELOW GROUND(following quantities are provisional)2.150W.13.1.1construction of 600x600 mm brick masonry man hole. All complete as directed by Engineer.nr5,200.000.002.151W.15.1.1construction of internal diameter 900mm brick masonary black water soakage pit. All complete as directed by Engineer.nr13,700.000.002.152W.16.1.1construction of 1000x1000 mm brick masonry waste water pit. All complete as directed by Engineer.nr14,200.000.00Total of page no 120.00

Page &P of &N

Sheet1Summery sheetPage numberAmount (Rs)01020304050607080910111213TOTAL

Section VItem NoSLS573 codeDiscriptionQtyUnitRateAmountSECTION VPAINTINGV.1.1.1Apply two coates of wall primer an two coates of approved quality and make luxury emulsion paint on faces of internal walls.mV.1.1.1Apply two coates of wall primer an two coates of approved quality and make luxury emulsion paint on faces of internal doors and windows reveal.mV.1.1.2.1Apply two coates of wall primer an two coates of approved quality and make luxury emulsion paint on faces of internal side of arch.mV.1.1.1preparing and apply two coates of primer and two coates of emulsion weather sealing paint on faces of extrnal wallsmV.1.1.2.1Apply two coates of wall primer an two coates of approved quality and make luxury emulsion paint on faces of external doors and windows reveal.mV.1.1.2.1Apply two coates of wall primer an two coates of approved quality and make luxury emulsion paint on faces of internal sides of RS.mV.1.1.1Apply two coates of wall primer an two coates of approved quality and make luxury emulsion paint on faces of internal walls of bath room.m

Section WItem NoSLS573 codeDiscriptionQtyUnitRateAmountSECTION WDRAINAGE SYSTEM BELOW GROUND(following quantities are provisional)W.13.1.1construction of 600x600 mm brick masonry man hole. All complete as directed by Engineer.nrW.15.1.1construction of internal diameter 900mm brick masonary black water soakage pit. All complete as directed by Engineer.nrW.16.1.1construction of 1000x1000 mm brick masonry waste water pit. All complete as directed by Engineer.nr