boss™ radiator valves

ø15.3

52.4

33.8

103.

584

.253.0

Rp 1/2" BS.2

1

Radiator Valves

2

Manual Radiator ValvesFeatures and benefitsThe valves have a chrome plated finish making them hard wearing,attractive and stylish. With a dual 15mm x 1⁄2in connection, they suitboth copper and iron pipework. The matching lock shieldcomplements the wheel head and TRV design. The concealed lockshield cap requires an Allen key to adjust flow, preventing accidentaltampering.

The upper O-ring seal can be changed without draining down, whichminimises down-time thus saving cost on site.

Approved to BS2767-10; guaranteed internal dimensions, minimisingresistance to ensure maximum flow. Valves are suited for both openvented and sealed systems.

Manuals Angle valve Angle concealed Straight concealedproduct code product code product code

CPWH 49341004CPLS 49341015 49341026 49341037

Maximum pressure 10 bar at 65ºCMaximum temperature 120ºC at 5bar

ø15.3

Rp 1/2" BS.21

52.9

63.1

34.8 Rp

1/2

" BS

.21

Chrome plated wheel head angle valve

Introduction

For a hundred years, has built a reputation for qualityand expertise in valve solutions in the UK. This has beenachieved by working closely with leading manufacturers toproduce unique BOSS branded products to compliment theestablished ranges in the marketplace.

Customers taking a valve can be assured they aregetting a high quality product at a competitive price. branded products are available across a wide range ofapplications: heating, pumping, consumables and bracketryand the valve offering is the most comprehensive own-brandrange in the market today.

The Range

The radiator valve range consists of 4 manualradiator valves and a choice of up to 24 TRV options

The range of Thermostatic Radiator Valves (TRV’s)comprises three different 1⁄2 body patterns – angle, reverseangle (axial) and straight – with a choice of pre-setting andnon presetting options making six valves in all.

These bodies are complemented by four different thermalheads, standard, remote sensing and remote adjusting in 2mand 8m capillary lengths.

All thermal heads and bodies in the range are compatiblewith each other and approved to EN 215.

The bodies are all approved to EN 215 and other standardse.g. BS EN1254 where EN215 does not specify theconnection type.

The thermal heads all incorporate range limiting using twoplastic pins (supplied) and a handle locking mechanism thatprevents movement from the set position. This works bypulling the outer cover to a raised position to unlock andpushing the outer cover to a lower position to lock.Additionally the standard and remote sensing versions canbe tamperproofed using a specially designed plastic key ineither the locked or unlocked position.

As well as the choice of TRV options using separate thermalheads and valve bodies, two TRV head and body packs areavailable in angle and reverse angle patterns.

To complement the range there is a full range of accessoriesshown with the complete valve range.

The range of manual valves comprises twotraditional manual radiator valves consisting of a 1⁄2wheelhandle and lockshield with an angle pattern valve bodyand a concealed lockshield valve in angle and straightpattern valve body. Each valve is approved to BS 2767-10.

Product Code 49341004

ø15.3

34.8

39.2

52.9

Rp 1

/2"

BS.2

1

Rp 1/2" BS.21

ø15.

354

.2

105.164.5

Rp 1

/2"

BS.2

1

Rp 1

/2"

BS.2

1

ø15.3

63.2

34.8

52.4

Rp 1/2" BS.21

Rp 1

/2"

BS.2

1

Chrome plated lock shield angle valve

Chrome plated lock shield concealed angle valve

Chrome plated lock shield concealed straight valve


Product Code49341026


ø15.3

52.4

33.8

103.

5 84.2

53.0

Rp 1

/2"

BS.2

1

Rp 1/2" BS.21

ø15.3

52.9

33.8

103.5

84.2

53.0

Rp 1

/2"

BS.2

1

Rp 1/2" BS.21

Thermostatic Horizontal TRV Vertical TRVradiator valves product code product code1⁄2in to 15mm 49341048 49341059

Thermostatic Radiator ValvesFeatures and benefitsWith a control range of 11 to 29ºC, this allows flexibility in settingcomfort levels and optimises energy efficiency. The valve has a frostsetting, opening automatically around 7ºC to prevent the systemfreezing. Positive shut off allows the heat emitter to be isolated formaintenance. The range limiting and locking prevents over or underheating in public areas and optimises energy efficiency, whilst thelimiting and locking pins allow the user to customise temperaturesettings. The built in tamper proof key operated setting is simple tolock and secure with an easy to use release tool. The lift and lockoperation prevents accidental adjustment.

TRV Vertical

TRV Horizontal

4



ø53.0

84.2

LOCKED

86.7

UNLOCKED

0 * 1 2 3 4 5shut off 7ºC 11-13ºC 15-17ºC 19-21ºC 22-25ºC 27-29ºC

Thermal Head OptionsFeatures and benefitsWith a control range of 11 to 29ºC, this allows flexibility in settingcomfort levels and optimises energy efficiency. The valve has a frostsetting, opening automatically around 7ºC to prevent the systemfreezing. Positive shut off allows the heat emitter to be isolated formaintenance. The range limiting and locking prevents over or underheating in public areas and optimises energy efficiency, whilst thelimiting and locking pins allow the user to customise temperaturesettings. The built in tamper proof key operated setting is simple tolock and secure with an easy to use release tool. The lift and lockoperation prevents accidental adjustment.

Thermal Head Options Thermal Head Remote HeadProduct Code Product Code

Thermal Head 0 position 493410702mtr Remote Sensor 493410818mtr Remote Sensor 493412292mtr Remote Adjuster 493410928mtr Remote Adjuster 49341100

84.0

ø53.0

100.0

39.0

19.0

80.0

ø4.1

LOCKED

86.5

ø53.0

UNLOCKED

5

Thermal head with 0 position

Head with 2mtr & 8mtr remote sensor

Remote sensing prevents curtains or office equipment interferingwith thermal head.

Sensor can be placed 2m away from head.

Also suitable for LST radiators.


2mtr Remote Sensor Product Code 493410818mtr Remote Sensor Product Code 49341229

6

85.0

85.0

B

B

71.6

LOCKED POSITION

A

A

61.5

SECTION B-B

75.2

UN-LOCKED POSITION

Head with 2m or 8m remote adjuster

Remote adjuster provides temperature control in hard to reach areas or built in applications.

Sensor can be placed 2m and 8m away from head. Suitable for small rooms.

2mtr Remote Adjuster Product Code 493410928mtr Remote Adjuster Product Code 49341100

ø15.3

36.0

33.8

52.4

Rp 1

/2"

BS.2

1

Rp 1/2" BS.21

Valve Body Options

Features and benefitsThe valves have a chrome plated finish making them hard wearing,attractive and stylish. They are approved to EN215 guaranteeingthermal and hydraulic performance. The double O-ring seal offersdouble seal protection. The gland removal tool accessory allows thegland to be changed without draining down the system. With a dual15mm x 1/2in connection, they suit both copper and iron pipe work.The preset valves have pre-setting mechanism that enables the userto adjust the maximum flow accurately from a chart provided.

The two way operation provides reverse flow operation capabilityand operates quietly whatever the flow direction.

A comprehensive range of heads enables the customer to meet awide variety of installation applications.

Valve Angle horizontal Angle vertical StraightBody product code product code product code1⁄2in-15mm 49341111 49341122 49341133Preset 49341166 49341144 49341155

Maximum pressure 10 bar at 65ºCMaximum temperature 120ºC at 5bar

Chrome plated TRV body angle vertical

Chrome plated TRV body reverse angle

7

ø15.3

35.9 52.9

33.8

Rp 1

/2"

BS.2

1

Rp 1/2" BS.21



8

ø15.

342

.8

40.6 50.9

Rp 1

/2"

BS.2

1

Rp 1

/2"

BS.2

1

ø15.3

36.0

52.4

33.8 Rp

1/2

" BS

.21

Rp 1/2" BS.21

Chrome plated TRV body straight

TRV body preset angle vertical



9

ø15.3

35.9 52.9

33.8

Rp 1/2" BS.21

ø15.

3

42.8

40.6 50.9

Rp 1

/2"

BS.2

1

Rp 1

/2"

BS.2

1

TRV body preset reverse angle

TRV body preset straight



10

wolF drawroF nrettaP elgnA dleihskcoL dna leehwdnaH launaM

10.0

1.0

1

000010001001

h/l wolF

Pre

ssu

re D

iffe

ren

tial

Bar

wolFerusserP)h/l()raB(

4.67210.00.46721

67.2vk

wolF drawroF nrettaP elgnA dleihskcoL delaecnoC

10.0

1.0

1

000010001001

h/l wolF

Pre

ssu

re D

iffe

ren

tial

Bar


9.98210.07.89821

09.2vk

wolF esreveR nrettaP thgiartS dleihskcoL delaecnoC

10.0

1.0

1

000010001001

h/l wolF

Pre

ssu

re D

iffe

ren

tial

Bar


1.30210.07.03021

30.2vk

Angle/reverse angle/straight pattern – forward flowNominal flow �P1 �P2 Seat authority akg/h Bar Bar206 0.1 0.01 0.9

Kv, angle/reverse angle/straight pattern – forward flowKv

S-1K 0.23S-2K 0.52Max 1.74

Angle/reverse angle – reverse flowNominal flow �P1 �P2 Seat authority akg/h Bar Bar220 0.1 0.01 0.9

Kv, angle/reverse angle – reverse flowKv

S-1K 0.38S-2K 0.74Max 1.94

Straight pattern – reverse flowNominal flow �P1 �P2 Seat authority akg/h Bar Bar184 0.1 0.02 0.8

Kv, straight pattern – reverse flowKv

S-1K 0.25S-2K 0.54Max 1.13

Thermostatic Valves – Non-Presetting

Flow data

Manual Valves

0.01

0.1

1

1 10 100 1,000 10,000

Pres

sure

diff

eren

ce B

ar

Flow l/h

S-1KS-2KMax

Angle/reverse angle/straight pattern forward flow

0.01

0.1

1

1 10 100 1,000 10,000

Pres

sure

diff

eren

ce B

ar

Flow l/h

S-1KS-2KMax

Angle/reverse angle pattern reverse flow

0.01

0.1

1

1 10 100 1,000 10,000

Pres

sure

diff

eren

ce B

ar

Flow l/h

S-1KS-2KMax

Straight pattern forward flow

11

Thermostatic Valves – Presetting

Angle/reverse angle/straight pattern – forward flow – pre-settingSetting Nominal/ �P1 �P2 Seat authority a

characteristic Bar Barflow kg/h

0 44 0.1 0.1 01 151 0.1 0.1 02 206 0.1 0.068 0.323 206 0.1 0.037 0.634 206 0.1 0.027 0.735 206 0.1 0.02 0.86 206 0.1 0.015 0.857 206 0.1 0.011 0.898 206 0.1 0.009 0.919 206 0.1 0.006 0.94

Kv, angle/reverse angle/straight pattern – forward flow – pre-settingKv Kv

S-1K 0.23 4 1.16S-2K 0.56 5 1.320 0.09 6 1.471 0.48 7 1.562 0.75 8 1.673 1.01 9 1.77

Angle/reverse angle pattern – reverse flow – pre-settingSetting Nominal/ �P1 �P2 Seat authority a


0 45 0.1 0.1 01 164 0.1 0.1 02 220 0.1 0.062 0.383 220 0.1 0.032 0.684 220 0.1 0.019 0.815 220 0.1 0.0125 0.8756 220 0.1 0.009 0.917 220 0.1 0.0065 0.9358 220 0.1 0.005 0.959 220 0.1 0.004 0.96

Kv, angle/reverse angle pattern – reverse flow – pre-settingKv Kv

S-1K 0.26 4 1.42S-2K 0.7 5 1.630 0.08 6 1.761 0.48 7 1.852 0.83 8 1.943 1.17 9 2.03

Straight pattern – reverse flow – pre-settingSetting Nominal/ �P1 �P2 Seat authority a


0 30 0.1 0.1 01 120 0.1 0.1 02 184 0.1 0.0765 0.2353 184 0.1 0.0464 0.5364 184 0.1 0.036 0.645 184 0.1 0.0275 0.7256 184 0.1 0.022 0.787 184 0.1 0.0215 0.7858 184 0.1 0.0188 0.8129 184 0.1 0.018 0.82

Kv, straight pattern – reverse flow – pre-settingKv Kv

S-1K 0.25 4 1.04S-2K 0.55 5 1.060 0.45 6 1.121 0.68 7 1.142 0.82 8 1.173 0.98 9 1.2

0.01

0.1

1

1 10 100 1,000 10,000

Angle/reverse angle/straight pattern forward flow pre-setting

Pres

sure

diff

eren

ce B

ar

Flow l/h

S-1KS-2K0 Position1 Position2 Position3 Position4 Position5 Position6 Position7 Position8 Position9 Position

0.01

0.1

1

1 10 100 1,000 10,000

Pres

sure

diff

eren

ce B

ar

Flow l/h


Angle/reverse angle pattern reverse flow pre-setting

0.01

0.1

1

1 10 100 1,000 10,000

Pres

sure

diff

eren

ce B

ar

Flow l/h


Straight pattern reverse flow pre-setting

12

Available on request.

Accessories

Accessory Description Product codeGland removal tool Thermostatic valve gland can be changed without draining 49341177Locking limiting pin Restricts the range of operation on thermal head 49341188Set of capillary clips Optional clips for fixing the capillary tube to the wall 49341199Tamper-proof key for thermal head Plastic key to lock thermal head operation 49341207Remote sensor housing Replacement sensor housing 49341218

BOSSTHERMBOSSTHERM Domestic Controls

Product description Product CodeBOSSTHERM BCT CYLINDER STAT 15-90C 15A SPCO 20809254BJB JUNCTION BOX 20809265BOSSTHERM BUT2 UNIVERSAL TIMESWITCH 20810006BOSSTHERM BUP2 UNIVERSAL PROGRAMMER 20810017BOSSTHERM BRTMK2 ROOM THERMOSTAT 20810028BOSSTHERM BPS242 PROGRAMMABLE THERMOSTAT 20810039BOSSTHERM BRV222 22MM 2 PORT ZONE VALVE 230V 20810050BOSSTHERM BZV228 28MM 2 PORT ZONE VALVE 230V 20810061BOSSTHERM BMPV222 22MM 3 PORT MID POSITION VALVE 230V 20810072BOSSTHERM BMPV228 22MM 3 PORT MID POSITION VALVE 230V 20810083

13

Installation

LocationIt is important that the sensing head is not exposed to direct sunlight,covered by curtains or subjected to direct heating from radiators, pipesor equipment such as television sets. If this occurs it will prevent thethermostatic head from sensing the room temperature properly. In suchcases a remote sensor or remote adjuster should be used to achievecorrect temperature control (see ‘Remote Sensor’ below).

To avoid premature closing of the valve thermostatic sensing headsshould not be mounted vertically at the top connection to a radiator. Ifspace does not permit horizontal mounting then a thermal head with aremote sensor should be used to achieve the best performance.

To avoid the problem of hydronic (water flow) noise it is recommendedthat the differential pressure does not exceed 0.2 bar. It is stronglyrecommended that an automatic bypass valve is fitted to any systemwith a high proportion of TRVs.

Fitting the Valve Body1. Using a suitable jointing material, screw the radiator adaptor tail into the flow side of the radiator; the valve is approved for two-way

(reverse flow) operation if it is not possible to identify the flow pipe. The inlet connection is designed for both copper and iron pipe.

2. If using screwed tube first ensure threads are clean and de-burred. Using a suitable jointing material, screw the valve body onto the tubealigning the valve body with the radiator tail.

3. Connect the valve body to the radiator tail and tighten the nut.

4. For copper tube cut, de-burr and fit tube to the valve body using the nipple and olive supplied.

Fitting the Thermostatic Head1. Unscrew the protective cap from the valve body of the thermostatic valve.

2. Adjust the head setting to maximum by pulling the handle upwards and then rotating it to setting 5

3. Push handle down to ensure that it is in the locked position and then place the head on the valve bodyso that the display pointer is visible to the user.

4. Engage the securing ring on the valve body carefully then tighten it without using excessive force

5. Test operation by lifting the handle and rotating it between setting 0 and 5.

6. Adjust the setting of the sensing head to the customer’s requirements and push down to lock thesetting.

Remote SensorThe remote sensor comes complete with a 2 metre capillary, sensing phial and phial housing. The adjustable head is fitted to the valve bodyin exactly the same way as above. The capillary should be carefully uncoiled and run to the intended phial location free from direct sunlight,extraneous sources of heat or other obstructions. Using the phial housing as a template, mark the position of the fixing holes and prepare thehole with a suitable wall plug. Clip the phial into the housing and then secure to the wall using the screws supplied. The capillary can beclipped to the wall using product code 49341199.

14

Operation

GeneralThe thermostatic radiator valve provides automatic temperature control of a room or space by regulating the opening and closing ofthe radiator valve dependent on the surrounding air temperature. The desired comfort temperature is pre selected by turning the hand wheel.

Temperature Range Adjustment

Temperature Setting Range0 * 1 2 3 4 5

Shut Off 7oC 11-13oC 15-17oC 19-21oC 23-25oC 27-29oC

Deviations of a few degrees are possible depending on the particular installation and design of the heating system. If the approximatetemperature values specified in the above table cannot be reached please contact your heating engineer.

Frost SettingIn the * position the valve opens automatically at a surrounding temperature of approximately 7°C, thus preventingthe system from freezing.

Shut Off Function 0The thermostatic valve is shut off and will not respond to changes in temperature. This may be used whendisconnecting the radiator.

Limiting the operating temperature rangeTwo limit pins are supplied with each thermal head which may be used to limit the temperature range.

To limit range between a minimum and maximum setting:1. Set to the desired position and insert pins into the holes in the base surrounding setting 3.2. Check that head movement is limited to the desired range.

For setting to a maximum only:1. Turn handle to the desired maximum position.2. Insert pin into first orifice lower than setting 3.

For setting to minimum only:1. Set to desired minimum position. 2. Insert pin into first orifice higher than setting 3.

retniop

Lift the handle up to enable it to be turned

Turn the handle to the desired setting against the pointer (see ‘Setting Range’ below)

Push down to lock into position. This will prevent accidental adjustment of the setting

0

nip timiL

15

Tamper proof temperature settingInitially remove the thermal head from the valvebody and lock the setting in desired position.

Pre-setting Valve Characteristic Flow1/2 angle / reverse 1/2 angle / reverse 1/2 straight pattern

angle pattern forward flow angle pattern reverse flow forward & reverse flow

Setting Kg/hr Kg/hr Kg/hr

0 44 45 401 151 164 1302 206 220 1953 206 220 1954 206 220 1955 206 220 1956 206 220 1957 206 220 1958 206 220 1959 206 220 195

Technical DataMaximum Operating Pressure 10 barMaximum Differential Pressure 0.6 barMaximum Water Temperature 120oCTemperature Range 11oC – 29oCFrost Setting 7oCPositive Shut-off Function Setting ‘0’

Technical AdviceFor technical advice please call: 08701 200285 from 09.30 to 16.30 Monday to Friday (except Christmas Day and Bank holidays).

Engage the locking ring by twisting

Remove the ring by pulling downwards.

Align removal tool into the head grooves and engage

4 5

Reposition locking ring off-setting the lugs as shown and push firmly home

The head is now locked. To restore temperature adjustment to the head remove the locking ring and refit as shown

BSS BRANCH LOCATIONS THROUGHOUT THE UK & IRELAND

Pipeline & Heating Solutions

ABERDEEN Unit 5, South Middleton Base, Greenwell Road,East Tullos, Aberdeen AB12 3AXTel: 01224 292929 Fax: 01224 898252Email: [email protected]

BELFAST 36-38 Duncrue Road, Duncrue Industrial Estate,Belfast, Northern Ireland BT3 9BPTel: 028 9078 4000 Fax: 028 9078 4010Email: [email protected]

BIRMINGHAM Units 2 & 4 Crystal Drive, Sandwell Business Park,Smethwick, Warley, West Midlands B66 1QGTel: 0121 552 6000 Fax: 0121 552 5363Email: [email protected]

BIRMINGHAM CENTRAL Unit 49, Gravelly Industrial Park,Tyburn Road, Erdington, Birmingham B24 8TGTel: 0121 322 0370 Fax: 0121 322 2296Email: [email protected]

BOREHAMWOOD Chester Road, Borehamwood, Herts WD6 1LTTel: 020 8327 4100 Fax: 020 8327 4101Email: [email protected]

BOURNEMOUTH Unit 3B, Broom Road Business Park,Broom Road, Poole, Dorset BH12 4PATel: 01202 711300 Fax: 01202 711301Email: [email protected]

BRENTFORD Transport Avenue, Great West Road,Brentford, Middlesex TW8 9HFTel: 020 8232 2727 Fax: 020 8232 2730Email: [email protected]

BRISTOL Albert Road, St Philips, Bristol BS2 0BSTel: 0117 972 7900 Fax: 0117 972 7901Email: [email protected]

CAMBRIDGE Unit 3, Rosemary Lane, Cambridge CB1 3LQTel: 01223 404040 Fax: 01223 240420Email: [email protected]

CARDIFF Unit 4, Trident Park, Glass Avenue, Ocean Way,Cardiff CF24 5ENTel: 029 2043 2400 Fax: 029 2049 7815Email: [email protected]

CARLISLE Unit 2A, Port Road Business Park, Carlisle CA2 7AJTel: 01228 517600 Fax: 01228 598090Email: [email protected]

CHESSINGTON Oakcroft Road, Chessington Industrial Estate,Chessington, Surrey KT9 1RHTel: 020 8974 3800 Fax: 020 8391 5241Email: [email protected]

COLCHESTER Unit 6, Smeaton Close, Severalls Industrial ParkColchester, Essex CO4 9QYTel: 01206 754720 Fax: 01206 752649Email: [email protected]

CORK Unit 20, South Link Park, Ballycurren Road, Grange, CorkTel: 00353 214 321588 Fax: 00353 214 321595Email: [email protected]

COVENTRY Unit 17, Torrington Avenue, Coventry,West Midlands CV4 9HNTel: 024 7669 4744 Fax: 024 7647 0574Email: [email protected]

CRAWLEY 12A Denvale Trade Park, Haslett Avenue East,Crawley RH10 1SSTel: 01293 610170 Fax: 01293 523388Email: [email protected]

CROYDON Unit 34, Factory Lane, Croydon, Surrey CR0 3RLTel: 020 8662 2300 Fax: 020 8681 6142Email: [email protected]

DARTFORD Unit 11 Orbital One, Green Street, Green Road,Dartford, Kent DA1 1QGTel: 01322 289039 Fax: 01322 289149Email: [email protected]

DERBY Riverside Road, Pride Park, Derby DE24 8HHTel: 01332 685600 Fax: 01332 685601Email: [email protected]

DUBLIN White Heather Industrial Estate,301 South Circular Road, Dublin 8Tel: 00353 14 165100 Fax: 00353 14 165165Email: [email protected]

DUNDEE Unit 1-3, Rutherford Road,Dryburgh Industrial Estate, Dundee DD2 3XHTel: 01382 823700 Fax: 01382 826921Email: [email protected]

EDINBURGH Unit 2A, Pentland Industrial Estate, Loanhead,Midlothian, Edinburgh EH20 9QHTel: 0131 440 5900 Fax: 0131 440 3761Email: [email protected]

EXETER Unit 6, Otter Court, Manaton Close,Matford Business Park, Exeter EX2 8PFTel: 01392 457500 Fax: 01392 425976Email: [email protected]

GLASGOW Unit A, Vermont Street, Kinning Park, Glasgow G41 1LUTel: 0141 418 4444 Fax: 0141 429 2638Email: [email protected]

GLOUCESTER Unit C1, Eastbrook Road Trading Estate,Eastern Avenue, Gloucester, GL4 3DBTel: 01452 872200 Fax: 01452 309899Email: [email protected]

GRIMSBY Europa Park, Gilbey Road, Grimsby DN31 2FDTel: 01472 265100 Fax: 01472 241638Email: [email protected]

HULL Copenhagen Road, Sutton Fields Industrial Estate,Hull, East Yorkshire HU7 0YHTel: 01482 625800 Fax: 01482 838870Email: [email protected]

KINGS CROSS Unit 2, 1 Brewery Road, Islington, London N7 9QJTel: 020 7619 7600 Fax: 020 7700 2482Email: [email protected]

LEEDS Turnkey Park Estate, Whitehall Road, Leeds LS12 6ADTel: 0113 203 2203 Fax: 0113 279 8662Email: [email protected]

LEICESTER 66 Cobden Street, Leicester LE1 2LBTel: 0116 242 7800 Fax: 0116 253 2456Email: [email protected]

LEWES Unit 5, South Downs Business Park, Brooks Road,Lewes, East Sussex BN7 2FBTel: 01273 485000 Fax: 01273 480709Email: [email protected]

LINCOLN Units 3/4, Crofton Drive, Allenby Industrial Estate,Lincoln LN3 4NRTel: 01522 565700 Fax: 01522 512678Email: [email protected]

LIVERPOOL 82/94 Great Howard Street, Liverpool L3 7AXTel: 0151 482 2500 Fax: 0151 207 2317Email: [email protected]

LONDON DOCKLANDS Units 6 & 7, Thomas Road Industrial Estate,Limehouse, London E14 7BNTel: 020 7531 3900 Fax: 020 7537 4849Email: [email protected]

LUTON 1 Trojan Court, Laporte Way, Luton, Beds LU4 8RJTel: 01582 875600 Fax: 01582 452050Email: [email protected]

MAIDSTONE Unit 5, Wood Close, Quarry Wood Industrial Estate,Aylesford, Kent ME20 7UBTel: 01622 713600 Fax: 01622 713616Email: [email protected]

MANCHESTER Unit 1, Columbus Way, Off Broadway, Salford,Manchester M50 1UUTel: 0161 888 6464 Fax: 0161 888 6465Email: [email protected]

NEWCASTLE Sanderson Street, Newcastle-upon-Tyne NE4 7PJTel: 0191 256 5100 Fax: 0191 272 3115Email: [email protected]

NORTHAMPTON Riverside Way, Bedford Road,Northampton NN1 5NXTel: 01604 251400 Fax: 01604 620588Email: [email protected]

NORWICH Unit 13, Alston Road, Hellesdon Park Industrial Estate,Norwich, Norfolk NR6 5DSTel: 01603 253200 Fax: 01603 418839Email: [email protected]

NOTTINGHAM Unit 3, Longwall Avenue,Queens Drive Industrial Estate, Nottingham NG2 1NATel: 0115 943 5900 Fax: 0115 986 1099Email: [email protected]

OXFORD Unit C Taurus, Peterley Road, Horspath Industrial Estate,Cowley, Oxford OX4 2TZTel: 01865 398870 Fax: 01865 777552Email: [email protected]

PETERBOROUGH Unit 2a, Centurion Business Centre,Sturrock Way, Bretton, Peterborough PE3 8YBTel: 01733 336000 Fax: 01733 265790Email: [email protected]

PLYMOUTH Block G, St. Modwen Road, Parkway Industrial Estate,Plymouth, Devon PL6 8LHTel: 01752 675300 Fax: 01752 220063Email: [email protected]

PRESTON Unit 1 & 2, Brookfield Street, Preston PR1 1NRTel: 01772 557800 Fax: 01772 259285Email: [email protected]

READING Units A2 & A3, Worton Drive,Worton Grange Industrial Estate, Reading, Berks RG2 0TGTel: 0118 923 8900 Fax: 0118 975 0497Email: [email protected]

ROMFORD King George Close, Eastern Avenue West,Romford, Essex RM7 7PSTel: 01708 771800 Fax: 01708 723168Email: [email protected]

SHEFFIELD Unit 15, Oakham Drive, Parkwood Industrial Estate,Sheffield S3 9QXTel: 0114 289 3900 Fax: 0114 276 7178Email: [email protected]

SOUTHAMPTON Unit A1, Parham Drive,Boyatt Wood Trading Estate, Eastleigh, Hampshire SO50 4NUTel: 023 8068 3700 Fax: 023 8064 3928Email: [email protected]

STOCKTON Teesway Industrial Estate,Stockton on Tees, Teesway TS18 2RSTel: 01642 665500 Fax: 01642 674652Email: [email protected]

STOKE ON TRENT Units 6 & 7, Etruria Way, Basford,Stoke on Trent ST4 6JQ Tel: 01782 382382 Fax: 01782 621456Email: [email protected]

SWANSEA Century Park, Valley Way, Swansea Enterprise Park,Swansea SA6 8QPTel: 01792 762300 Fax: 01792 775922Email: [email protected]

SWINDON Unit 4A, Euroway Industrial Estate, Ramsden Road,Swindon SN5 8YWTel: 01793 601500 Fax: 01793 512144Email: [email protected]

WANDSWORTH Unit 5, 307-309 Merton Road, Wandsworth,London, SW18 5JSTel: 020 8877 9191 Fax: 020 8877 9719Email: [email protected]

WIGAN Unit 2, Lockflight Buildings, Wheatlea Industrial Estate,Wheatlea Road, Wigan WN3 6XPTel: 01942 405540 Fax: 01942 405541Email: [email protected]

WIRRAL Rossmore Road East, Rossmore Industrial Estate,Ellesmere Port, South Wirral, Cheshire CH65 3DDTel: 0151 348 5400 Fax: 0151 357 2001Email: [email protected]

Registered Office: The BSS Group plc, Fleet House, Lee Circle, Leicester LE1 3QQ, Registered in England Number: 60987 Tel: 0116 262 3232 Fax: 0116 253 1343 E-mail: [email protected] Web: www.bssuk.co.uk

boss™ radiator valves

Documents