bowser catalogue

8/13/2019 Bowser Catalogue

1/12

D R I N K I

N G

W A T E R

A P P R O V E D


2/12

1000 Litre Drinking Water Bowser

E

C I

F I C

A

T I

O

N

These durable impact resistant

polythene tanks are Water Council

Approved for drinking water and have

internal anti-surge bafes for ease of

towing on the highway.

The units have a lockable tamper

proof lid, covering the 400mm

diameter access hatch, which

incorporates the ller point and vent.

The polythene tank is mounted

on a galvanised chassis unit,

manufactured from Rolled Hollow

Section, tted with a single leaf-

spring suspension axle. The

unit is manufactured to full highway

specication, with overrun and

lockable parking brakes and two

185 x 14 x 8 ply wheels and tyres

will be tted, underneath plastic

mudguards.

The hydraulically damped towing unit

will be supplied with an eye or ball

hitch (to suit your towing vehicle) with

telescopic jockey wheel, and a prop

stand will be tted to the rear of

the unit.

Our standard lighting board will be

tted, wired through the chassis and

connected to an international

7 pin plug.

The bowsers can also be supplied

as a site model. This model is

designed specically for off-road use,

and will be tted with an unbraked

axle. No suspension mudguards or

brakes will be supplied.

These bowsers are easily

manoeuvrable and ideal for towing,

and can lend themselves to many

uses where water is required.


3/12


4/12


5/12


6/12

Are you under pressure?

to temporary ofces, accommodation

blocks and toilets

BUILDING CONTRACTORSPLANT HIRE COMPANIESCOUNCIL & LOCAL

AUTHORITIESCIVIL ENGINEERSSHOW GROUND OPERATORS

P i c t u r e s c o u r t e s y o

f M a n c

h e s t e r

C a

b i n s L

t d

Bowser Supply Bowsers supply pressurized water


7/12

1000 and 2000 Litre HighwayModel Water Bowsers

The durable impact resistantpolythene tank comes complete witha 240V water pump incorporating apressure sensor unit, delivering 55litres per minute with a maximumhead of 50M. The sensor unit allowsthe pump to work only when water isrequired, for example when turningon a tap or ushing a toilet. Thesensor also prevents the pumpworking when the bowser runs dry.

The tank has a lockable tamper prooflid, convering the 400mm diameteraccess hatch which incorporates the

ller point and vent.The plastic tank is mounted on

a galvanisedchassis unit,manufacturedfrom Rolled HollowSection, tted with a singleleaf-spring suspension axle.The unit is manufactured to fullhighway specication, with overrunand lockable parking brakes andtwo 185 x 14 x 8 Ply wheels andtyres will be tted underneath plasticmudguards.

The hydraulically damped towing unitwill be supplied with an eye or ball

hitch (to suit your towing vehicle) withtelescopic jockey wheel, and a prop

stand will be tted tothe rear of the unit. Ourstandard lighting board willbe tted, wired through the chassisand connected with an international7 pin plug.

The bowser can also be suppliedas a site model. This is designedprimarily for off-road use and willbe tted with an unbraked axle. Nosuspension mudguard brakes orlights will be supplied.

A L S O A V A I L A B L E I N

H O T D I P P E D G A L V A N I S E D S T E E L

E

C I

F I C

A

T I

O

N


8/12

CALL ONE OURFRIENDLY SALESTEAM TODAY ON

The Greenkeepers Must Have accessory forthis season, that will help keep the course intip-top condition. This compact, lightweightwater bowser is simple to use and ideal for thosepreviously less accessible parts of the course.

The Boominator Spraying System


9/12

E

C I

F I C

A

T

I O

N

These durable impact resistant

polythene tanks are Water Council Approved for drinking water and have

internal anti-surge bafes for ease of

towing on the highway.

The units have a lockable tamper

proof lid, covering the 400mm

diameter access hatch, which

incorporates the ller point and vent.

The polythene tank is mounted

on a galvanised chassis unit,

manufactured from Rolled Hollow

Section, tted with a single leaf-

spring suspension axle. The

unit is manufactured to full highway

specication, with overrun and

lockable parking brakes and two185 x 14 x 8 ply wheels and tyres

will be tted, underneath plastic

mudguards.

The hydraulically damped towing unit

will be supplied with an eye or ball

hitch (to suit your towing vehicle) with

telescopic jockey wheel, and a prop

stand will be tted to the rear of

the unit.

Our standard lighting board will be

tted, wired through the chassis and

connected to an international

7 pin plug.

The bowsers can also be supplied

as a site model. This model is

designed specically for off-road use,

and will be tted with an unbraked

axle. No suspension mudguards or

brakes will be supplied.

These bowsers are easily

manoeuvrable and ideal for towing,

and can lend themselves to many

uses where water is required.

Information on various types of pump

is available on request.


10/12

Bunded Bowser

Bow se r Supply fully bunded Diesel Bowsersmeet all current regulations,

f


11/12

1000 and 2000 litreHighway Model Bunded Diesel Bowsers

P

E

C

I F I C

A

T I

O

N

anufactured from 3mm thick mildsteel plate with at ends and internalant -surge a es, t e owser tan sare tted with a high ow piston handpump. Generating a ow rate of 90litres per minute, the unit comescomplete with 6M of 25mm bore fuel

hose and aluminium trigger nozzle.he pumping equipment is fully

enclosed within a lockable pumpingc am er.

he tank is mounted on a galvanisedchassis unit, manufactured from

00mm x 50mm Rolled Hollow Sectionwith a stand-on footplate on the

drawbar, and tted with a single leaf-spring suspension axle. All units areequ ppe w t a y rau ca y ampetow ng tc w t an eye or acoupling, heavy duty jockey wheel,overrun and lockable parking brake.

Our standard lighting board will betted, wired through the chassis andsupplied with an international7 p n pug.

The 1000 litre models will be suppliedwith 2 x 185 x 14 wheels and tyres,and the 2000 litre models will besupplied with 2 x 750 x 16 wheels

and tyres, all tted under galvanisedsteel mudguards. These products areu y roa ega an cert e or e

Carriage of Dangerous Goods.

The 1000 and 2000 litre site modelsare identical to the highway units, but

as these were designed primarily foroff-road use, suspension, mudguards,brakes and lights will not be supplied.

After manufacture, the tank is nishedgloss painted in a colour of yourchoice.


12/12

Bowser Supply : The No.1 choice for Bunded BowsersBowser Supply have been designing, manufacturing and supplying their top quality, high

of twenty years.

s customers forOver this period the company has earned an enviable reputation with itare manufacturedcomplete reliability. Because both the inner and outer shell

from 3mm mild steel, the standard working life expectancy of a Bowser Supply refore, representowser is very likely to exceed 20 years. The bowsers, th

lue. This coupledlong term investment to buyers and are outstanding vwith our excellent after sales service and support ma ke Bowser Supply the

riety of industrialreferred supplier to some of the top names in a vsectors.

Bowser Supply Bunded Diesel Bowsers are avai lable from stock in1000 or 2000 litre models, choose from :

Site or highway specications robust skid frame orStatic tank version which is mounted on a

for ease ofSupplied with stacker truck access pointsovement

iage of Dangerous All of our units are UN Approved for the Cartraceable UNoods and a re suppl ied wi th a unique ful ly t

erticate and serial number.

The nishing touch

000 litre Highway Model illustrated

Bowser Supply bowsers can be nished in a choice of gloss painted colours to compliment your

tity.ndividual corporate iden

bowser catalogue

Documents